I love how trashbuilds just end up looking like Star Wars ships b/c they were made of the same stuff lol
@NicheCrafts2 жыл бұрын
Hahaha absolutely. All the sets are just garbage glued to the walls.
@justindunlap12352 жыл бұрын
That's my favorite part of the original trilogy is recognizing some of the items used in the set/proper design.
@nikofloof6731 Жыл бұрын
Yeah, thats what makes them so distinctive, the fact they could be plausibly built and greebled by hand, and have 70s energy
@planetfall5056 Жыл бұрын
Love it! So kludged together and scrappy. Just perfect vibes for a Corellian junker.
@NicheCrafts Жыл бұрын
thanks!
@moondog83532 жыл бұрын
The thing about the purple Sharpie; you can use isopropyl alcohol to clean off Sharpie marks before you paint. Just make sure it won't also dissolve any glues or materials you are also using in your build. It will also take off acryllic paint but, I don't know about enamel, latex or lacquer.
@NicheCrafts2 жыл бұрын
Of course! I’ll keep that in mind next time. Thanks for the tip !
@jacobelliott31604 ай бұрын
Yes yes yes. Awesome build!! Keep doing these. Love love love!!
@NicheCrafts4 ай бұрын
Thanks!
@ErasmasExpeditions2 жыл бұрын
Well done! I think it turned out great, you learned some key points about your materials and tools, and you kept a positive outlook and humor about the entire project. Bravo!
@NicheCrafts2 жыл бұрын
Thanks!
@dartmart926311 ай бұрын
Wow, outstanding work. And very inspiring! I have been hoarding bits and containers for exactly such a project, and now I’m pumped to give it a try. Thanks so much for making this video.
@NicheCrafts11 ай бұрын
Thanks a lot! that’s amazing. It’s a blast! Do it!
@dartmart926311 ай бұрын
@@NicheCrafts Are you planning to do another spaceship video?
@NicheCrafts11 ай бұрын
I will someday! I definitely have plans for some more sci fi terrain. I have also been hoarding trash lol@@dartmart9263
@dartmart926311 ай бұрын
@@NicheCrafts Awesome! Thanks
@felixbenvenutty19692 жыл бұрын
Dope nice!! keep going I enjoyed your design for that star wars fighter ship.
@NicheCrafts2 жыл бұрын
Thanks !
@williamcole4612 Жыл бұрын
Very impressed with your creativity and your diligence in finishing this project! Well done!
@NicheCrafts Жыл бұрын
Thanks !!
@melodietheavatar2 жыл бұрын
This video is hilarious and the build is fantastic and the last two minutes of the video are a gift to this world. Especially the “pew pew” effect. Great job :)
@NicheCrafts2 жыл бұрын
Ey thanks Mélodie!
@stardude20065 ай бұрын
You can use fairy lights to light up the engines they’re cheap and effective. That’s if you want to light the model when you’re finished. LEGO also makes some light up modules and they would be the perfect size for your ship.
@NicheCrafts5 ай бұрын
@@stardude2006 yeah totally !
@leonhunter18392 жыл бұрын
AWESOME... ..............MORE "STAR WARS" PLEASE!
@NicheCrafts2 жыл бұрын
If you Insist !
@craftysean945 Жыл бұрын
I just started scracth building my first spaceship out of junk. So coming across this video was perfect. I really enjoyed watching your process. Thank you for posting this :)
@NicheCrafts Жыл бұрын
That's awesome! thanks!
@craftysean945 Жыл бұрын
@@NicheCrafts you’re welcome 😎
@eljibarocaptainwepa81982 жыл бұрын
That's so awesome buddy! Kool 👍🏽👏🏽
@NicheCrafts2 жыл бұрын
Thanks!!
@sbcinema2 жыл бұрын
There are two methods to make the cockpit look better, the first is of course to build it inside as well, which is very time-consuming, the second is to paint the transparent plastic from the inside, which gives it a great depth effect. Alternatively, transparent nail polish can also be used.
@NicheCrafts2 жыл бұрын
Will definitely try the nail polish and I would absolutely love to build a tiny interior. I’m only going to get more ambitious with these builds.
@Jianju69 Жыл бұрын
Do you mean clear nail polish to give the exterior canopy a glossier finish?
@sbcinema Жыл бұрын
@@Jianju69 no just gloss black, but you can use clear on black as well
@jesseseehawer5840 Жыл бұрын
Great representation of the creative process. Many People are too afraid of failure to even try to make something, yet we see that altgough you had many failures you still finished the project and emerged victorious with a great looking build and much more knowledge than before
@NicheCrafts Жыл бұрын
Thanks a lot!
@kaaawasakiproductions Жыл бұрын
This was AWESOME!! I really enjoyed your video and the space flight at the end was very cool!!!!
@NicheCrafts Жыл бұрын
Thanks! That was my favourite part!
@kaaawasakiproductions Жыл бұрын
@@NicheCrafts It was Brilliant!!!
@NicheCrafts Жыл бұрын
@@kaaawasakiproductions Thanks! I didn't have a green screen so the whole thing was done with Starbucks aprons lol
@kaaawasakiproductions Жыл бұрын
@@NicheCrafts It just keeps getting better and better!! Bravo!!! Bravo!!! This is the way!!
@NicheCrafts Жыл бұрын
@@kaaawasakiproductions this is the way.
@roberthanna4882 Жыл бұрын
I really like this build. It has that lived in Star Wars look to it. Well done.
@ToonGrin11 ай бұрын
Really proud of seeing you learn as you go. Trial and error is definitely part of the journey. A piece of advice I'll impart is you can use a light cardstock like from cereal boxes as a means to make templates to see where things can go. 😊 Also EVA foam will be a powerful ally in your adventure. Also resin black nail polish will make for great glass in your windows.
@NicheCrafts11 ай бұрын
Good advice ! Thanks!
@MrBlendercross Жыл бұрын
Nice to see that there are still people to have imagination, nice job !
@NicheCrafts Жыл бұрын
Thanks a lot!
@Among-Us.2 жыл бұрын
This guy is worth subscribing He has the perfect potential of converting an educational video into fun
@NicheCrafts2 жыл бұрын
Hey, Thanks a lot !
@krzysztofmathews738 Жыл бұрын
That's a fun build. Love the 'Wilhelm Scream' for the chip clip!
@NicheCrafts Жыл бұрын
Hehe Thanks!
@pmac2217 Жыл бұрын
This Looks great. Good job.
@NicheCrafts Жыл бұрын
Thanks!
@CanonballKryptoTheKryptonautsI4 ай бұрын
Very Awesome! And great sound fx
@NicheCrafts4 ай бұрын
Hahah thanks made em myself!
@damwaterthomas19802 жыл бұрын
That looks awesome, and thanks again for sharing with us.
@NicheCrafts Жыл бұрын
Thank you!
@DarkNookShop2 жыл бұрын
Great scratch build. Had the feel of one of the old Kenner toy star wars ships.
@NicheCrafts2 жыл бұрын
Wow thanks !
@Bluejsa1 Жыл бұрын
Love scratchbuilds and was thinking of doing this for my players starwars game aswell. Came out really good :)
@billdefranza49272 жыл бұрын
Dude! This looks awesome. Great build.
@NicheCrafts2 жыл бұрын
Thanks a lot! More to come!
@paulaneary78772 жыл бұрын
Hooray! I have been looking for Star Wars builds! Thank you so much! Great job! I got lots of ideas. I am new to this type of activity but I love it.
@NicheCrafts2 жыл бұрын
Amazing. Love that. More to come!
@Zey-The-Mouse4 ай бұрын
an incredible job!, well done, you have the creative eye!, looks so realistic, you can make anything out of trash! many regards, Ian & Zey :)
@NicheCrafts4 ай бұрын
Thanks a lot !
@AedorDM2 жыл бұрын
very inspired build. the zip ties for the vents is very clever. super clue spout for the muzzle device too
@NicheCrafts2 жыл бұрын
Thanks!
@propsandvillainy Жыл бұрын
Badassery!! Subbed - now I gotta go build me a spaceship out of cardboard, Eva foam and some led lights
@NicheCrafts Жыл бұрын
YEAH! That makes me want to make another one!
@LittleGiantCrafts2 жыл бұрын
This came out fantastic! Excellent use of trash, and you nailed the Star Wars aesthetic 🤘
@NicheCrafts2 жыл бұрын
Thanks !
@harleyskawronik6382 Жыл бұрын
Haha, I love how you were in the garbage compactor. 😂
@NicheCrafts Жыл бұрын
hehehe
@georgemartinezjr Жыл бұрын
Great job what Brand of paint and Brushes you use
@NicheCrafts Жыл бұрын
Oh almost exclusively cheap craft paint and the cheapest brushes. The purple paint was citadel but the rest were the cheapest I could find
@emilflognoid15322 жыл бұрын
It really looks good man! It’s cool to build your characters gear and ships, I’ve been working on a stealth tie fighter for my character in our Edge of the Empire game, but it’s been on the back burner a minute… need to get back to that!
@NicheCrafts2 жыл бұрын
Thanks! Do it!
@NebLleb2 жыл бұрын
You literally redesigned the YT-2000 from X-Wing Alliance and made it feel fresh. I would make an insult, but I REALLY love the X-Wing/TIE Fighter games, easily the best, most immersive Star Wars games ever made, so this is right up my alley.
@NicheCrafts2 жыл бұрын
Haha awesome
@thedarkknight803able2 жыл бұрын
Awesome build 😁👍🏾
@NicheCrafts2 жыл бұрын
Thanks !
@brymanxl Жыл бұрын
I absolutely love this, the build turned our incredible! I have to try to do something similar to add it to my micro galaxy squadrons collection.
@NicheCrafts Жыл бұрын
Yes! Do it!
@charlestaylor39632 жыл бұрын
WHAT A PIECE OF JUNK!!! LOL, WOWZZZZEEERRRRZZZZZ!!! THAT IS A FREAKING AWESOME SHIP!!!! It definitely has the markings of a Correllian Class, again just FREAKING AWESOME!!!! I'm currently working on my very first Star Wars inspired spaceship build, by the shape of the bottle it looks like it might be a discontinued Hammerhead class.
@NicheCrafts2 жыл бұрын
Amazing! Thanks a lot!
@InsidetheBoothTV2 жыл бұрын
great job!!!
@NicheCrafts2 жыл бұрын
Thanks!
@1966tvbatman2 жыл бұрын
Nice job. Do take your time. I think your next one will turn out much better!
@NicheCrafts2 жыл бұрын
I know it will! Thanks!
@goatmealcookies74212 жыл бұрын
Really nice build. Btw... clear fingernail polish works pretty well for glasseffects
@NicheCrafts2 жыл бұрын
Oooo excellent idea!
@phillipsteyn8120 Жыл бұрын
plus it doubles as nail polish too !
@PlutoBuchs96 Жыл бұрын
This is an incredible build! I love seeing all the random bits and bobbles becoming a cohesive ship. It's so cool seeing what pieces you used for what! I'd never have thought to use the zip ties for the engines!! :0
@NicheCrafts Жыл бұрын
Eyyyyy thanks! It is definitely the most fun part to just add bobbles and see what works!
@RaikenXion Жыл бұрын
Your model is really cool I appreciate all the parts of trash u used to make it and the level of detail. I've started working on a model of my own, it's a YV-865 Aurore-class freighter.
@NicheCrafts Жыл бұрын
Ooo that’s a really fun ship! I’d like to see it when it’s done!
@spinafire Жыл бұрын
I like the woodburning trick, quick and dirty way to get some deeper panel lines and shapes.
@NicheCrafts Жыл бұрын
Yeah! worked well. I think i would pre-score them a little next time because the tool can easily slip and you get deep mistake marks
@ArmouryTerrain Жыл бұрын
It looks pretty good and will work well with legion or in dioramas. What seems to be missing is a loading ramp and the standardised correllian air locks.
@NicheCrafts Жыл бұрын
If I'm not mistaken, the loading ramp and airlock would be in the back middle section. I imagine the ramp comes down - same as the landing gear, not included in this build (though maybe in my next ship build!).
@ArmouryTerrain Жыл бұрын
@@NicheCrafts My Mistake - I had thought that the back middle section was more engines.
@NicheCrafts Жыл бұрын
@@ArmouryTerrain No worries! I had to look it up. I was using a few references when making this build!
@GadreelAdvocat2 жыл бұрын
Movie quality space ship! Makes me want to make a ship toy.
@NicheCrafts2 жыл бұрын
Do it! I had never done a project like this before. I believe in you!
@timothyyoung29622 жыл бұрын
Despite the bumps along the way, it turned out pretty damn good. I've been slowly making ships for Stargrave using junk and old squirt gun and Nerf gun parts. So yeah, I can relate to doing something and then realizing, yeah, that wasn't the best idea. But you take those experience points into the next build. I've learned a lot from building my own terrain and from watching other people on KZbin do the same. I like how the ship turned out. Would be interesting to see another video where you take a second stab at it and see how well it turns out.
@NicheCrafts2 жыл бұрын
Would definitely consider that! Working on another junk build atm and it’s definitely going smoother!
@KismetMulhaneski-to3wg11 ай бұрын
Having seen the production details of the first Star Wars film, with the scrimping and saving and what they got away with, I beleve Mr Lucas would approve.
@NicheCrafts11 ай бұрын
hahaha thanks!
@valley_robot2 жыл бұрын
Nice work mate , subbed , funny video as well
@NicheCrafts2 жыл бұрын
Thanks! Welcome aboard
@burnsco2 жыл бұрын
Damn! That is a great looking ship - now I’m inspired to go try and make something as cool. Subscribed!
@NicheCrafts2 жыл бұрын
Do it! Thanks a lot!
@douglassandquist76645 ай бұрын
Love the design of the ship
@NicheCrafts5 ай бұрын
Thanks!
@rickee2652 Жыл бұрын
Neat idea using the zip ties for vent grills :)
@NicheCrafts Жыл бұрын
Thanks !
@bjscustoms Жыл бұрын
Very cool star wars ship.
@NicheCrafts Жыл бұрын
Thanks !
@charlesedwards9635 Жыл бұрын
Bravo well done 👏🏻
@NicheCrafts Жыл бұрын
Thanks !
@slavenarkaimovski38972 жыл бұрын
Can you made Aven Colony diorama on 1m2 surface,and make of it perfect small city.
@AWildVixAppears2 жыл бұрын
Also, the intro made me cackle. 🤣
@chadbodine3362 жыл бұрын
Now you should make the inside play area of the ship so you can have epic battles repelling boards, or board an enemy ship!!!
@NicheCrafts2 жыл бұрын
Yeah!
@MegaMaximus333 Жыл бұрын
What more can I say other than I dig it, because I dig it! Awesome job. Why does trash make such good star ships?
@NicheCrafts Жыл бұрын
I mean I think it’s because so much sci fi media used garbage to make their models hahaha
@samanthaadams6192 жыл бұрын
Very nice! =D That looks like something they could use as a prop for a Star Wars film. It very much looks like it was built by the same folks that did the Falcon.
@NicheCrafts2 жыл бұрын
Eh! Thank you so much !
@TerrainbyAaron2 жыл бұрын
Awesome build👌
@NicheCrafts2 жыл бұрын
thank you so much!
@JohnJohnson-cn9fh4 ай бұрын
this looks great,any space craft would get bashed to blazes by space debris so it would get pretty roughed up,best wishes on a job well done.........................jpj
@NicheCrafts4 ай бұрын
Haha totally thanks !
@arturoc.1764 ай бұрын
Thank you. It will be nice if you could make it a 1/12 scale to fit in 6" action figures.
@NicheCrafts4 ай бұрын
Hahaha that would be crazy! I couldn’t….right?
@DTczsk1999 Жыл бұрын
Beautiful ship! 👍🏆
@NicheCrafts Жыл бұрын
Thankss !
@NelsonVlog6623 күн бұрын
"What a piece of junk."-Luke Skywalker to Han Solo
@Zoie3x8 Жыл бұрын
it is definitely a piece of junk .... but can it make point-5 past lightspeed ? :P but seriously, its kinda badass that you made this from trash. Very Nice. :D
@NicheCrafts Жыл бұрын
Haha Thanks! and Absolutely not!
@georgemartinezjr Жыл бұрын
You can use Bathroom Chalking For filled it Water Soluble So can be Smoth with your Finger or Silacine Sculpting Tool BRUSH
@snake5320 Жыл бұрын
Where did your shirt buttons go
@NicheCrafts Жыл бұрын
;)
@snake5320 Жыл бұрын
@@NicheCraftsmore like the death stick Han Solo
@prettynoose849710 ай бұрын
The paint job and detailing is very difficult to perfect! But just like anything, more practice is what's needed...after all, Eddie Van Halen didn't play Eruption the first time he picked up a guitar!
@NicheCrafts10 ай бұрын
Totally!
@aanler Жыл бұрын
My only issue with combining super glue with baking soda is that it absorbs humidity. Giving you the possibility of a drippy mess on a hot summers day.
@NicheCrafts Жыл бұрын
Hmm never had that problem. Good to know!
@Paintedfigs Жыл бұрын
This is genius!
@NicheCrafts Жыл бұрын
Thanks :)
@paulaneary78772 жыл бұрын
I would LOVE to see you make a Tie Fighter. That would be great! Or actually build a miniature Darth Vader. I am making some items for a young friend of mine, he is 5 and he really likes Darth Vader. Thanks again for the video!
@NicheCrafts2 жыл бұрын
I would definitely consider that !
@AWildVixAppears2 жыл бұрын
Heck yeeeeeeah! It's the Juggernaut, bitch! This build rocks so hard, dude! You really captured the YT as a ship, and I feel like this perfectly meets the spirit of the Star Wars specific junk ship. I also kind of like the really rough texture! It gives it "this ship has rusted and then been painted straight over without removing the rust" vibes, which feels appropriate. I also can't believe that the turrets were trashcobbled too! Because it swivelled, I just assumed it was a piece from some kind of kit! It's so cool that the swivel was done with magnets. I would love to see more Star Wars builds! I feel like there are so many locations and monsters and ships in Star Wars that could be fun minis.
@emkultra2349 Жыл бұрын
great vid
@NicheCrafts Жыл бұрын
Thanks!
@louislowery28772 жыл бұрын
Nice job
@NicheCrafts2 жыл бұрын
Thanks !
@lopaka76 Жыл бұрын
Did I miss the comment? "What a piece of junk." 😏
@NicheCrafts Жыл бұрын
haha nice
@finsantos4630 Жыл бұрын
Cool!
@NicheCrafts Жыл бұрын
:)
@rya_belladonna4 ай бұрын
i'm very late but try using black gloss nail polish for stuff like cockpit glass it is a quick and dirt cheap way to get really smooth glass but it needs to be the cheapest nail polish ever we are talking drugstore brand stuff it works the best
@NicheCrafts4 ай бұрын
Totally. Did that on a more recent build!
@joeycoolproductions31732 жыл бұрын
this is cool
@NicheCrafts2 жыл бұрын
Thanks!
@gabiballetje2 жыл бұрын
Oh yeah, this just looks likes something you'd be able to buy like a YT-900 or something. Just a smaller model.
@NicheCrafts2 жыл бұрын
Thanks!
@travismoore7849 Жыл бұрын
Nice kit bash.
@NicheCrafts Жыл бұрын
Thanks!!!
@travismoore7849 Жыл бұрын
@@NicheCrafts YT series like craft?
@PurpleHouseComedy2 жыл бұрын
damn impressive
@NicheCrafts2 жыл бұрын
Thanks! Means a lot. This was all new methods but turned out pretty good!
@xanderbarr19832 жыл бұрын
Impressive. Most impressive indeed. Now try a slave1...be the master.
@NicheCrafts Жыл бұрын
Oh I may just have to!
@lucianocostart Жыл бұрын
haha. yeah...holy sh**t. This is a famous brazilian meme 3:23, Nazaré Tedesco. lol
@NicheCrafts Жыл бұрын
:)
@moif_velocita7 ай бұрын
She's the ship who made the garbage run in less that 12 parsecs
@NicheCrafts7 ай бұрын
😝
@aanler Жыл бұрын
Oil washes are not "I have to do it outside" kind of toxic, they are more "don't put me on your skin or in your mouth" kind of toxic.
@NicheCrafts Жыл бұрын
It's more for the smell. I don't have great ventilation where I work. I once put a cactus in my studio and it shrivelled up and died. So now I lean on the safe side and work outside.
@aboutface79612 жыл бұрын
craft fun
@NicheCrafts2 жыл бұрын
Agreed!
@light00651 Жыл бұрын
this dude painted his finger💀
@h.s.lafever3277 Жыл бұрын
welcome on my tabletop anytime.
@NicheCrafts Жыл бұрын
haha thanks!
@RandyZimmerman-pp5wj5 ай бұрын
Keep calm and build on fail more you will learn more I did this in the 60s and the 70s and starting again esayons mean let us try
@NicheCrafts5 ай бұрын
@@RandyZimmerman-pp5wj haha love that
@RandyZimmerman-pp5wj5 ай бұрын
@@NicheCrafts I used to make wooden go carts and race them down the driveway and wreck it Ralph had the most stitches on the block gooaal
@danielmurillo5439 Жыл бұрын
Hello, my name is D and I am doing a research project based on about the representation of the impact of the popular franchise Star Wars has on culture. You’re video came to my attention and I would like to get a feedback on what are you’re thoughts and opinion on why this concept idea is very important to cultural and media and as a fan why star wars inspire you to do what you do. Thanks,
@KrazzPL Жыл бұрын
you seem to have the same adhd recklesness in building models as i do. i enjoyed your video but it hurts my hear when someone used pp or hdpe parts in builds,i use polistyrene exclusively
@NicheCrafts Жыл бұрын
I do indeed have that adhd. I love using that junk though
@KrazzPL Жыл бұрын
@@NicheCrafts my issue with those 2 materials is that they are chemically which causes any bond used to them fairly weak,while polystyrene parts are being welded both by superglue and standard modelling glue
@NicheCrafts Жыл бұрын
@@KrazzPL Oh totally. There it is definitely more difficult but i love the feeling of turning trash into something cool. Can't beat that for me.
@laroark5036 Жыл бұрын
Soo what's with the nail polish big boy ?
@putzmanntv Жыл бұрын
mee 2
@Eromasta69 ай бұрын
star wars IS trash, so no surprise there
@NicheCrafts9 ай бұрын
lol
@mathiaspierce9204 Жыл бұрын
Hey would you mind if I used your ship design for a project?
@NicheCrafts Жыл бұрын
Go for it! I worked from reference from other artists. would love to see it when its done!
@taylorthomas9059 Жыл бұрын
Amazing and Disney made a franchise into trash 😂😂😂😂 🫰