I Made an ESC for Brushed Motors and Exploded During Testing

[@stejer211]

Now build an airplane for the big motor and suffer like we suffered in the nineties!

[@Sub_Zero_47]

Reread the title, it looks like you exploded instead of the ESC 🤣

[@Joyplanes]

Someone shared this with me: Werner Hanke I let myself be insulated and built another version that is based on this one. I'm also uploading the sketch here. The difference between my ESC and this one is that I work without Dalinton transistors and put the Powermos Gate over 330 ohms on pin 4 and pull Down the Gat with 10 K to GND. That saves space. Sketck: bool secure = 0; int stat; void setup() { pinMode (2, INPUT); // Receiver Throttle Signal Input pinMode (4, OUTPUT); // Mosfet Gate Output Pin pinMode (3, OUTPUT); // Red led pinMode (1, OUTPUT); // Blue led analogWrite(4,0); // Pin 4 set to Low for Safty digitalWrite(3,HIGH); digitalWrite(1,LOW); delay(300); digitalWrite(3,LOW); digitalWrite(1,HIGH); delay(300); digitalWrite(3,HIGH); digitalWrite(1,LOW); delay(300); digitalWrite(3,LOW); digitalWrite(1,HIGH); delay(300); digitalWrite(3,LOW); digitalWrite(1,LOW); delay(300); secure = 1; //*********************** Set Run into Run Protacktion ****************************** } //********************************************************************************* //* 1200 & 1900 PPM fits with Radiomaster T16 at *- 100 Servo and Timming Neutral * //********************************************************************************* // ******************************************* Run Protaction ************************************ void loop() { while (secure == 1) { stat = pulseIn(2, HIGH); // Read Pin 2 PPM // ******************************* Disabel ESC if hight PWM on Pin 2 @ Startup *********************** if (stat >= 1201){ secure = 1; digitalWrite(3,HIGH); delay(200); digitalWrite(3,LOW); delay(200); } if (stat = 1000){ secure = 0; }} } //***************************** //* ESC behavior when armed * //***************************** stat = pulseIn(2, HIGH); // Read Pin 2 PPM if (stat = 1201){ //*** Start PPM Mapping LED 1 ON Indicates ESC runs Output ****** digitalWrite(1,HIGH); analogWrite(4, map(pulseIn(2, HIGH), 1200, 1900, 0, 255)); } }

[@eliascastillorivera7130]

Hi! I have a question. Is it reversible? Or maybe can it be used with 3s?

[@guacamolesauce69]

Very impressive

[@hassanjomaa6451]

Hello thank you very much for this great video! Any way the advantage of brushed motor is the long duration of flight i build micro parkflyer and with brushed motor i can fly for 20min some time more with the brushless less than 4min with 1s 700mah lipo My plan is to build plane with 2s powerd brushed motor and see the duration of flight compared to brushless, thanks!

[@almosh3271]

What is the specification for the bigger motor? Nicw work !!

[@ourchannel8215]

what the small receiver used in this video?

[@dangermines5914]

Hello bro i see your all video

[@Joyplanes]

You are the best

[@abdullahafzal9]

Hello joy i watched your videos of reading plans can you please make a video that how to convert a full size plans to tiles in autocad or illustrator

[@abdullahafzal9]

@Markus Kyle Bro go and read my comment.You are in a wrong place

[@hey-zq1vq]

Sick you got yourself a really big sponsor👍

[@pratyushpro9060]

Can u please say which reciver u have used ?

[@loodwich]

Why you didn't use the word "burn" or "burn out" in this title? (I am subscribed to your both channels, and the title was different)

[@josedavidbanegasalpiri7953]

Hola joy vas a hacer lo mismo en el otro canal no