I REFUSED to Buy This on ETSY {Build It Yourself} {DIY Tutorial}

  Рет қаралды 11,202

Fish Over Chicks Woodworking

Fish Over Chicks Woodworking

Күн бұрын

Пікірлер: 43
@1252PFC
@1252PFC 7 күн бұрын
Maybe two holes at back so it doesn't swing?
@FishOverChicksWoodworking
@FishOverChicksWoodworking 7 күн бұрын
Probably a good move!
@robira1313
@robira1313 5 күн бұрын
You're the real deal! Thank you for showing your blunders as well as educating and inspiring me! A lot of these other KZbinrs try to make everything look so easy that it is actually frustrating to watch them! I relate to you! And it ended up being an awesome-looking project!
@FishOverChicksWoodworking
@FishOverChicksWoodworking 5 күн бұрын
So glad you enjoyed it! Gotta show the mistakes cause they happen to everyone!
@joehanika
@joehanika 6 күн бұрын
Laughed out loud at the 1” bit. I can relate too much.
@DomsDyes
@DomsDyes 5 күн бұрын
That nail trick on the crosscut sled is a great idea 🙏
@PiercesPerfectPieces
@PiercesPerfectPieces 7 күн бұрын
The Bearded Viking Special! 💯👍
@robertclark5752
@robertclark5752 7 күн бұрын
Nice job! Neat trick to cut a circle. Look forward to your next video.
@FishOverChicksWoodworking
@FishOverChicksWoodworking 7 күн бұрын
Thanks Robert!
@garytingler3222
@garytingler3222 7 күн бұрын
Very nice !!! That is great the way you made the circle.
@FishOverChicksWoodworking
@FishOverChicksWoodworking 7 күн бұрын
Thanks!
@suehenderson9862
@suehenderson9862 8 күн бұрын
I have wood putty and/or wood filler nearby at all times for inept moments. Of which I have many. Since the magnets are underneath, filling in that oopsie will make it nearly unnoticeable. Nice project!
@FishOverChicksWoodworking
@FishOverChicksWoodworking 7 күн бұрын
Good idea, We’ll get some filler for it!
@Greyotterstudio
@Greyotterstudio 8 күн бұрын
Really enjoyed this build mate - and thoroughly enjoying the new way you're making your videos, quality has gone right up! Although I admit the way you made the circle on the table saw terrified me, think i'll stick to a router or jigsaw for that! Looking forward to the next video.
@FishOverChicksWoodworking
@FishOverChicksWoodworking 8 күн бұрын
Thanks for watching! Fair enough with the table saw circle haha. I was a bit sketched out when I first started doing it but once I figured out the right amount of pressure to put on the wood so it wouldn’t move, I felt pretty confident while doing it
@1252PFC
@1252PFC 7 күн бұрын
Love to gift to someone as holiday present. Suggestion on how to personalize with their family name on shelve edge or along top half? Maybe circuit stickers it?
@FishOverChicksWoodworking
@FishOverChicksWoodworking 7 күн бұрын
That would be awesome! Good shout!
@joycelineharral5672
@joycelineharral5672 5 күн бұрын
Love this! Made me laugh. Thanks for sharing the mistakes.
@FishOverChicksWoodworking
@FishOverChicksWoodworking 5 күн бұрын
Of course! That’s how we learn!
@thomlindgren6253
@thomlindgren6253 7 күн бұрын
Great video and project. Love the mix of woods and the shape. Why didn’t John say something about the wrong bit before you used it. If it bothered you could you have run it back to the table saw and just brought the thickness down? Do you know if you have to be careful of what you put on the shelf that could be affected by magnets? A really high class look and thanks for sharing!
@FishOverChicksWoodworking
@FishOverChicksWoodworking 7 күн бұрын
Agreed! John’s gotta pay closer attention to what I’m doing haha. We did get one other comment saying that leaving credit cards on the shelf could stop them from working so I guess we’ll see in a couple months if our cards stop working lol!
@johnshanley1605
@johnshanley1605 7 күн бұрын
Lmao- I like the way you “clean off your finger” from the glue. Looks like you’re wiping a bugger off under the desk😅
@FishOverChicksWoodworking
@FishOverChicksWoodworking 7 күн бұрын
Hahahaha
@Ngry_W
@Ngry_W 6 күн бұрын
Decent project, I like that
@timalexwar
@timalexwar 4 күн бұрын
The circle cutting method is genius! By the way, what are you rubbing on for the finish? I am on an endless pursuit for "the right finish". I appreciate the authenticity of your video.
@FishOverChicksWoodworking
@FishOverChicksWoodworking 4 күн бұрын
It is a linseed Oil beeswax combo! We love it in the shop. Hope this helps!
@timalexwar
@timalexwar 3 күн бұрын
@@FishOverChicksWoodworking I will try that. Thanks for the tip. Keep up the great work!
@sellarsr123
@sellarsr123 6 күн бұрын
What kind of poly are you using
@NickWarne-bx3kv
@NickWarne-bx3kv 8 күн бұрын
Love the build but where do the cables go?
@FishOverChicksWoodworking
@FishOverChicksWoodworking 8 күн бұрын
which cables?
@NickWarne-bx3kv
@NickWarne-bx3kv 8 күн бұрын
Not sure why this comment ended up here, it’s meant for another video entirely. Still a great build though.
@krissk77
@krissk77 5 күн бұрын
Ok.. not everyone is good at woodwork. Some people buy and think it's cheap... what I can make I don't buy. That's easy to make no need going to etsy to buy. It's less than 50$ to make.😢
@1252PFC
@1252PFC 7 күн бұрын
While I appreciate the video, pls consider most folks don't have some special tools like a planer. Maybe provide alternative tools to accomplish same.
@FishOverChicksWoodworking
@FishOverChicksWoodworking 7 күн бұрын
We understand that. all tools like a planer do is save you some time. you could get very similar results with heavy sanding. Hope this helps!
@vampirezio6996
@vampirezio6996 7 күн бұрын
I agree seen a ton of these so it yourself videos from other creators and they almost always have an old piece of equipment that's not made anymore or is to expensive or large.
@tonybarracuda3505
@tonybarracuda3505 6 күн бұрын
If you can’t figure that out for yourself then maybe you should look at a different hobby 🤷‍♂️
@krissk77
@krissk77 5 күн бұрын
Use a sander or a hand planer......if you can cut them straight u can make one.🎉
@billbyrnes9505
@billbyrnes9505 8 күн бұрын
Don't let your credit cards, discount, and your gift cards lay too long or too close to those magnets. Why? It'll mess them up!
@FishOverChicksWoodworking
@FishOverChicksWoodworking 8 күн бұрын
hmmmm interesting point. We will be the guinea pigs! we'll let you know in a month haha!
@1252PFC
@1252PFC 7 күн бұрын
Use hooks instead. Simpler build
@robira1313
@robira1313 5 күн бұрын
@@1252PFC - Hooks are too generic. Magnets are awesome.
Turn Your SCRAP WOOD Into Gifts or CASH
23:30
Start Making (Woodworking)
Рет қаралды 133 М.
Turn YOUR Spare 2x4 Into $400 (HUGE Profit Margin)
10:47
Fish Over Chicks Woodworking
Рет қаралды 15 М.
It’s all not real
00:15
V.A. show / Магика
Рет қаралды 11 МЛН
100 Woodworking Projects (SELL THESE PROJECTS!)
47:59
Fish Over Chicks Woodworking
Рет қаралды 19 М.
I Failed at the Biggest Craft Show in the USA-Here’s What I Learned
22:36
A chair built for your half-dirty clothes
13:55
Simone Giertz
Рет қаралды 829 М.
What happens to products in epoxy resin over 4 years?
12:26
Axes: Garage
Рет қаралды 1,2 МЛН
Beginner Woodworking Projects
14:24
BeardedVikingWoodWorks
Рет қаралды 16 М.
Super Small Parts Organizer - Workshop Storage Ferris Wheel
20:47
Woodshop Junkies
Рет қаралды 39 М.
4 Easy one day builds that make you a better woodworker
18:34
MWA Woodworks
Рет қаралды 121 М.
THIS is Why Your Heat Bill is So High
18:21
Home RenoVision DIY
Рет қаралды 1 МЛН
It’s all not real
00:15
V.A. show / Магика
Рет қаралды 11 МЛН