I SAVED THOUSANDS $$$ NOT USING ZIP SYSTEM

[@javierjimenez9558]

Felt like an eternity since the last video, but glad to see the progress. Thoroughly enjoying this build series. Keep up the great work!

[@johnharrel7514]

Poor family has been through it! The DR Horton episode was way too close to home… THEY SUCK! Glad to see our Chevy influencer kicking butt!

[@patrickjoseph3412]

HOA "when the F**K is this eye sore going to be finished? " LoneStar Hawaiian “Doing his best bob Ross on plywood”

[@BearMacTX]

Great vids. My brothers and I build our own shops on our ranch here in Texas as well, and it's way more work than people realize. We went a bit bigger, and built 3 shops totaling 32,250 Sqft, encompassing a full paint and body shop, metal fab and cnc, wood shop, car workshop, powder coating, and 6000 sqft showroom for our car collection that is already too big, even with 5 four car storage lifts. We built almost everything ourselves except for the concrete, and after putting the roof on the 110x100 paint shop we said no and had the other shops roofs done. We also had spray foam done, and had 8 full glass garage doors installed, as well as 5 storefront window sections that are 21'x8', and 3 sections that are 16'x8'. All we have left is grinding and polishing our own concrete, pouring 40,000 sqft of concrete drives outside with all the storm water drainage, and finishing off the interiors completely so we don't see any insulation at all. Keep up the great work, and good luck with the rest of the project.

[@powderdescent]

How much was all that?

[@LonestarHawaiian]

💯💯

[@jaybird4095]

Regarding your door situation. Do what I call a double frame. Frame for the large door that you may want or help sell the place in the future. Frame in the smaller more affordable door, inside that frame. When it comes to the brick work. Brick it with expansion joints at the larger door. Maybe add some decorative touches within the large door frame so it blends in and looks like it was done on purpose. Down the road, easy tear out of the door to install the large RV style door. As for windows in the garage door, my opinion absolutely a must.

[@LonestarHawaiian]

Creative approach 🧐 I like it

[@retiredppd]

13’ door is high enough. They can run the door rails at an angle to follow the roof. Also go with a lift master garage door opener, they are very quiet and reliable. I just had 2 installed at the firehouse I volunteer at.

[@TheSaw410]

I second this. I used to run a 1 million square foot shopping mall, never replaced a lift master brand opener but replaced a lot of other brands with lift masters!! Great quality units.

[@alfredozayas3421]

Here's a probable solution to your garage door opener. I bought and had installed a direct drive opener. It attaches to the pipe that turns to open and close the garage doors. Lowe's sells them and believe me when I say it's a lot easier to install. Now, thats on a regular two car garage door, but hey maybe they make one for a longer door. It's pricey, but worth the money. It also comes with an electronic lock so no one will be opening that door when you close it. It was around $500. Last year so it might be a bit more now. Good luck with the project!

[@kyirwin4641]

You should definitely do high lift tracks and also wall mounted garage door openers.

[@H_Town_Raised713]

Been seeing your channel since before you started building your dream garage and I gotta say every video you make just seeing the transformation of your garage from nothing but grass in the backyard to almost being done is amazing bro!! Keep it up you’re almost there! Can’t wait to see the final product!

[@RyanBrown-uk6co]

High track system will get the tracks up against the ceiling and you can go whatever height door you want.

[@Pete90]

I have that style of door. It was just the thin metal so i added 3/4 foam board to the inside. huge difference in temp.

[@kchal0]

Encouraging to see the zip hold up so well. We are just about finished with our custom home here in Tx and I paid up to do 7/16 zip for walls and 5/8 zip for roof decking. A lot of builders on YT seem to recommend zip which is what sold me on it.

[@Andrewdhutchinson]

with the side mount garage motor you can suck those tracks up pretty close to the roof.

[@craigwilcoxen1536]

Looking sharp. Thanks for the post comparing the sheeting prices. Hadn't been in for awhile and didn't realize how much things had gone up. WOW !!!!

[@JerodMatlock]

Need to go with the 14-ft door so RVs and the like can be parked in your shop. You never know what the future holds! The three overhead doors with high performance insulation to take a look at are the Raynor TM200C, Haas 2033-20, and the Clopay 3720. The Clopay was the cheapest for me when I got my 14'h x 16'w door.

[@MichaelSironen]

Awesome progress! I have been enjoying watching your shop project, thank you for sharing your journey

[@unome55]

They do make specific RV garage doors, they are used in just about every house in AZ. They are 12 to 16 feet tall and insulated. They are just like regular garage doors just a lot taller, more panels. Also, you can set garage door tracks to angle at a 45 degree rather than the standard 90 degrees.

[@projecteli_]

The amount of pride and thought you put into what you do is top notch. 👌🏽

[@northside0nation]

You can do the new roll up insulated garage doors so there’s no need to worry about tracks

[@andreewert1925]

Some will just skip the sheating, tack on Metal Siding...then sprayfoam inside 1.5 INCh , then Insulation...Sheating is pricing itself out of the Market.

[@blamuk]

But you have a point. It's a waste of structural sheathing when all it's doing is..... ? The framing will hold up siding, the spray foam will make it airtight. So the sheathing is a waste.

[@andreewert1925]

@@blamuk People adapt..Many Farmers mill their Lumber, mostly Posts or studs..and they Do without Plywood that ends up rotting if exposed to Urine and Dung of Cattle, so they prefer either Planks or Metal Siding...or Half and Half , as you see in Horse Barns, with a Ply on the lower 4 feet section of a wall, metal above it, often uninsulated in Barns

[@ragingrevenge1]

@@blamukwind shear is a real thing. Metal siding has zero shear value.

[@MattRogersdesigns]

@@ragingrevenge1the building is a metal frame structure? It should have all of the required shear included in the fabrication or be explicitly determined in the drawings.

[@niktak1114]

​@@blamuk The sheathing is where all the shear strength of a typical wood construction house comes from

[@gunsnsails]

I know you're saving a ton of money doing it yourself but I also know it's still expensive. I watch all the ads for ya bro. It's what I hope folks do when my channel eventually gets monetized.

[@persiancucumber9255]

Your Art skills are just as impressive as everything else on your channel. 👍🏼🇺🇸🧂

[@williamgray3802]

The shop is looking great. Awesome job

[@PorkChop_405]

Enjoying the progress. Keep it up.

[@davidb1664]

Wading through the pond is one way to clean your tracks off

[@master6435]

Well for the durability testing house have stucco or other types of siding that make the exterior wall stronger

[@MrItalianfighter1]

I bought 5/8 osb back in early March for $14.23 a sheet because I knew the prices would jump up later. It's already at $20.35 right now and climbing.

[@georgemckenzie2525]

The more time passes the more I like cdx. Sure Advantec 5/8 square edge was my go to pre-zip, but now ? Half inch cdx then R'wool or foam, and then another layer of half inch cdx, or 3/4 strapping is the minimum standard. K. D. Tongue and Groove is not a bad choice if you integrate a bracing scheme into the framing.

[@mrprfct7069]

That thermoply is the reason why I walked away from many builders. Finally got a house built with OSB. That cardboard has holes everywhere after installation that the builder doesn’t cover. Ridiculous. FYI those are ring nailed (grooved). I used a similar battery powered gun with similar results. Some nails just don’t go all the way and had to go back with a Hammer. That was after one gun broke on me. Seems air guns are the way to go. Nice build.

[@MiniNinjai]

Love the progress. Been watching since the beginning.

[@TexasBestBarndominium]

We are loving it! 😮

[@JermainColbert119]

Almost done. Can't wait for the next one right next door to it.😊😊😊

[@robertkerby2581]

Great job a sheathing the backside; right-side and part of the front of your new shop building! I cannot wait to see you finish sheathing the front of the shop building, and installing a garage door! Well done!

[@justin1321]

Hey, no worries on gaps. We know you’re busy. Thanks for free content and progress. Just forwarded to my own dad, to subscribe, and enjoy your world.

[@LonestarHawaiian]

🤙🏽🤙🏽

[@albertc7375]

You don't need tracks on the ceiling. They sell a garage oper that bots on the wall next to door

[@jonny555ive]

Keep fighting the good fight my brother, in the end all the problems will just be story's of growing pains..... Aloha and Mahalo 👍👍 Take care, ~Jonny5🥁

[@carbongrip2108]

High Lift Tracks and Direct Drive Garage Door Opener.

[@keithupton6821]

I think most oriles auto parts offer a warranty on those gloves might have to make a friend for them to want to give you that warranty tho

[@ScottyLo]

It’s coming along nicely.

[@DanStrohschein]

Thankfully I no longer live in an HOA, so I can do whatever I want. That being said my shop walls are just the sheet metal (24 gauge) with fiberglass insulation batts behind them. I used to think this made me lucky - it was fast and easy to install. However, I have since learned that anytime I want to hang anything off the external walls outside or inside the shop, I have to build out a 2x4 wall in any case. I didn't really end up saving any time (or money). Oh well - learn as we go! Love the progress on your shop, thank you for sharing it with us!

[@bch5513]

Feel you on that one.. 😢

[@vi0cs]

fast and cheap doesn't always mean better.

[@jackscully4686]

It sounds like you could have water and wind shear problems in the future. If you did a diy maybe have an engineer double check. It really might rot quickly or blow over in a big storm. people don't just use wrb and structural sheathing just to waste money. They want their building to last

[@markoberlin2451]

Go 14' Most motorhomes or nice 5th wheels are 13' too 13' 6" or so

[@wickedbird1538]

😮😮 my friend works for a home contractor. He is allowed to keep any excess building material because construction waste fees are high. My friend built a double garage and store materials for several years. He mixed and blended lots of materials and built the structure of a 3 bedroom house with materials purchased by the homeowners.

[@gering46]

I think I’ve been following you for around a year now and your channel has quickly became one of my favorites and I look forward to seeing your content

[@jasonmiller3541]

Same here

[@LonestarHawaiian]

Much appreciated! 🤙🏽🤙🏽

[@marcthefastz1000]

bendpak need to sponsor that guy. like realy. if anyone got contact, now is the time. nice work buddy !!

[@tuckertech]

You have insane work ethic and love all the contractors in the comments giving you advice. It’s really awesome 🎉

[@bigesmotorpool]

Man, I felt that last clip. After mine was done I just sat inside and stared at everything for about an hour. It's a great feeling being inside a blank slate. I will tell you this... Jack-Shaft door opener. It might be a bit more than a chain or belt drive, but the things are super quiet. additionally, it's one less thing that "pierces" into your shop. I've got one on my 12'x12' door. Also keep in mind when you're doing quotes that you may be asking for an odd size, which can cause the price to exponentially go up. Using standard dimensions will keep it slightly more reasonable. Loving the videos! Keep it up!

[@michaelshallue1801]

Dark tinted glass door would be cool, but probably not weather friendly......

[@masterfabricator]

If it's gonna be that hot DONT DO A BLACK CEILING that's just inducing heat never do a black roof,do white to keep it cool.

[@bo_knows33]

Have you decided yet about becoming a full time KZbinr? Just curious! Great looking shop!🎉😊

[@pech_wake_day1153]

It’s coming along!!

[@garyyuh7031]

You should talk to the house garage door sub to see if he can add on 1-2 extra door sections. 8’0” too short for your front fascade. 10’ or 12’ would look mo bettah. You might have to use a 3/4hp motor for add’t weight….. You should also check how much more to hang door higher. With an 8’ door head height, hang door 10 or 12’. Will provide way more headroom for normal activities, and more latitude on car lifts in the future. IMHO. Good luck. From a bruddah in Nuuanu.

[@CrumbBob]

Could consider a aircraft hanger style insulated door. Also see them on farmers buildings. Can build frame yourself out of square tubing and insulate with foam board. You could build that 100 percent yourself

[@mdmoore23]

That Georgia Pacific sheathing was down under $11 at one point in SC where I live. It's now almost $30. Smh.

[@j.a.r.family2576]

Everyone can stop looking.... WE FOUND BANKSY!!!!!

[@amgaming1696]

Should’ve used osb staples to nail that in!!

[@Davidriveraz71]

I work installing natural gas in new subdivisions and I accidentally put my hand threw one of those 18 dollar sheets when I was going into the trench 😂

[@russellfrauendorfer3896]

Can someone make sense of the fact that 7/16 OSB without a weather barrier is being sold for significantly more than 7/16 OSB WITH a weather barrier? I mean are their plain OSB profit margins borderline criminal? They’re certainly immoral.

[@KeggyUran]

No kidding. Around here 1/2" Zip is nearly $5.00 cheaper in bulk than 7/16". It's getting insane.

[@canievision808]

Nice job braddah. One man gang'n'em. CHERRY !! Ohh Eee-cliiiipse.

[@michaelpirie1615]

great job

[@williamjawbone3385]

Shops looking good 👍... to bad I live in Canada or it'd offer help with the bricks... maybe a nice feature wall 🧱 or stone fireplace with a big screen. Or balling loft deck out like a man cave...lol. just a little brain storm

[@MikeShepherd-Royal]

Looking good! For the doors… why not buy 2 standard doors at $3500 each and then stack them?

[@kevingrosshandler5308]

Not sure when the last time you’ve seen prices at big box stores in Hawaii. I wish they were $36.50

[@Building-IT]

I plan on doing Zip System. It's not too bad here in Wisconsin from my supplier. It is more money, but I do think it's better. I have watched other compare the 2 and liked the Zip better. Love your videos. I will be recording my barndo build soon too. :)

[@newmonengineering]

Now you have to install plexiglass on the inner wall instead of drywall so you can see the art work lol

[@OriginalMomo]

Sarge is a definite trooper. Nothing like Ohana when you need help. 🤙🏼😈🤙🏼

[@Adam-wf8mu]

Have you considered a wall mounted garage door opener. Provides a clear Streamline look.

[@bobbygriffith1429]

Chad, brother… you are BY FAR one of the very best and MOST entertaining dudes on KZbin! 👏🏻👏🏻👏🏻👏🏻 I wait patiently each week for you to drop your video and video shorts. Go with the garage door with the windows, just cause they look cool! Keep up the great work, brother! Next time you need windows, hit me up.

[@LonestarHawaiian]

🤙🏽🤙🏽

[@wafflezoot]

Did you try ordering the windows from lowes/homedepot online for delivery? That sometimes will find old stock at other stores without you having to track it down.

[@johnwhite2576]

Force field and zip actually invented by smae guy- GP wand a competing product thta didn’t violate Hubert patent, he came up with force field. Force field is simply not as good as zip BuT it’s not a bad product at all. But when the price creeps up to zip levels it makes no sense. For larger homes osb with a spray applied product like Tremco starts making some sense price wise- I haven’t found. A peel and stick that isn’t hard to apply, but considered he dry blueskin-it’s least ex-endive and not bad at all.

[@theatomproject007]

I built a 24x30 metal building (not red iron though) and used sectional garage door. My opening is 18ft wide so it took a little longer to get the order, but it was a fraction of the cost of a roll up door rated for our wind requirements 120mph in the Mojave desert. My door is only 8ft tall, but my peak is 15ft with a 12ft ceiling height at the trusses. I had them use high lift tracks so the door snugs up to the ceiling very nicely. Unless you need the extra height for an RV then limit the size of the door because even the most expensive sectional doors don't insulate as well as the walls. I have 2in of closed cell spray foam on the walls of 24gauge PBR panel and 3/4 ACX plywood, but I can really feel the heat from the door compared to the walls when the sun is lower in the afternoon blasting my garage door. Nearly any local home garage door installer can get and install sectional doors that will work very well for much less than the cost of a commercial roll up door.

[@LonestarHawaiian]

Thanks!

[@adamm2716]

i did hardie panel siding, at like 33 or 35 a sheet

[@lucuix9901]

Why not get the garage style doors mean for boat garages?

[@WayneNMoney]

Dope video man!! Subscribed!!

[@OriginalMomo]

Juuuuust a little bit of rain…. 🤦🏼‍♂️😂 🌧️

[@deadstick8863]

Put in a flat slat non insulated door and then insulate yourself. There are plenty of videos on how to do it and it’s cheaper and better insulated. Also, if your roof is high enough, run the garage door straight up, not up and over. That way you aren’t blocking ceilings and lights in the building when the door is open.

[@sz4179]

Can't stand the music w my headphones its torture😢

[@gregorycasterline6060]

Dude i love that your channel keeps growing been a fan since your home in Hawaii with the 07 as the only truck. Really cool that you have the same sponsors as the big channels. Keep the content coming. Bring back your camera man too!! Tell the camera man the strike is over. Lol

[@LonestarHawaiian]

🤙🏽 THANKS FOR WATCHING ALL THIS TIME!

[@OceanofMaya]

Not only are zip sheets expensive...you'll get quite the sticker shock when one calculates how much the tape cost!!!

[@calistuntrider]

you get shit done buddy!! it's coming together nicely!! 👍👍

[@LyttonKing]

Are you going to the do the wiring soon here in a bit, I’m quite interested in how you do it and what you think of it 😂

[@imthdj2u]

i bought the same force field for for walls and roof and used the yellow tape on everything also the liquid flashing is great for along the bottom and nail holes but had to order it off amazon couldnt find it anywhere else ....also got my boards at the cheap price before it jumped. mines a 40x40x13 2x6 walls. our code wouldnt allow a metal frame. loving the progress and keep it up my guy.

[@JustBreCreates]

You have one the best eclipse time lapse of all the channels I follow great job on it and wonderful job on the shop❤

[@andrewbargo1]

I've been watching your videos for years and just now realized I was never subscribed, you just happen to keep popping up in my youtube matrix. So I just assumed I was already subscribed lmao

[@amc19791]

Should have used force field system for roof. Would have saved money?

[@LonestarHawaiian]

I wanted thicker OSB on the roof 🤙🏽. ForceField is only 7/16s

[@legod1717]

Wow looks so good and I’m sure you are super excited and tired!😂 Don’t worry about the upload frequency. We realize the daily grind. Every upload is a treat. Keep up the great work!😎

[@jasonjtg21]

It’s looking awesome! Don’t skimp on the door. Wait for have to. Insulated without tracks would be the way I would go. As someone I know says buy it nice or buy it twice.

[@tonyshipman257]

I was wondering if you purchased or rented that taller scaffolding. I'm working on building a pole barn this summer and trying to get a lot of the logistics worked out now. Thanks, Tony

[@LonestarHawaiian]

Figured I was going to be using it for a while on the exterior and interior so just bit the bullet and bought the set I can wheel around 🤙🏽

[@tonyshipman257]

@@LonestarHawaiian, I'm of the same mind and it is why I asked. What brand and model is the taller one? Thanks, Tony

[@Overpar73]

Looking fantastic bud, love the mural on the back wall. I'm hoping to get my ceiling installed on Friday, I've been running water and air lines throughout the whole shop and luckily I don't have any leaks! Take care and don't work too hard out there!

[@rivaled]

Definitely a tagger when you were younger 👮‍♂️ 😉

[@aserta]

0:34 from an european perspective, man... they sure love to rip you people off big time.

[@jwristen24]

Go with aluminum flashing at the base. That plastic will go away in a year

[@MrLostinlife2010]

The eclipse is cool, I’d like to go to Hawaii and witness Lahaina Noon

[@thomasgardner1734]

Put in a traditional garage door and add a couple more panels to add more height. much cheaper

[@lvmealn1]

Had to give this a thumbs up for showcasing the journey. Really appreciate the channel, you gave me a few upgrade ideas I was able to implement on my 2020 RST. Keep up the great work!!!

[@trueplayer7169]

Amazing work with the building keep up the good work ❤❤❤

[@damonnahoolewa9689]

Great idea to have the mural on the back of the shop

[@mattg43]

Looking great! I was on the same path with doors, and the same thought. I wanted flat panel, insulated and roll up, with a good weather seal. Like you, I also decided to do standard doors and deal with the track, because the cost was so ridiculous. I will echo the comment below about Clopay. Went through the Home Depot door design tool with them. It was a great price, and it was a quick and easy process.

[@kevinvega5059]

Crazy to think my dad gets all that for free since he’s a construction worker and he has his own crew and whatever is left over from the home builds he can take home we have piles of that cardboard stuff zip system osb tons of 2x4s 2x6s siding that he gets for free

[@miznitic5574]

Why don't you just build a barn door style door that slides on a track. Each side opens left/right and split down the middle. You've done everything yourself thus far, why not the doors?

[@CarryTrainer]

CDX over OSB for me

[@JoshuaBrown-is8fb]

Suggestion and or question.. depending on Texas building codes. Why not just build your own door similar to the actual building and have it split in the middle and swing open like barn doors or an airplane hanger? Could even add hydraulics and make it automatic or just a manual open/ close door.

[@dustinzachow7661]

I think you should do a 10 foot high door high lift at 3 to 4 feet whatever you can that will fit your wall hight. The door will sit in the high lift so it won't be 10 feet back into your shop giving you more room for car lift clearance. If you do a 14 foot door it will be 14 plus into the shop plus if you use a trolly opener that will be another 2 to three feet. I'd use a jack shaft opener lift master makes a 98032 that is made for bog heavy doors or the 98022 would work great on a 10 or 12 foot door. Just my advice.