It turned out way better than I thought it would. It's actually not bad!
@Steeles4 ай бұрын
lol. Well thanks. It’s holding up good so far
@freakyflow5 ай бұрын
So i been doing autobody for 30+ years now And for a older truck The raptor liner saves a lot of work of scratches And ugly stuff I am going with the 4 bottle with hardener with a matching tint Your work was perfect Only tip on applying it after the first coat which was too close to each pass is : 2nd coat further back And wider laps above the next pass = Zero lines in the coats ...Other than that she looks good
@Steeles5 ай бұрын
Thanks for the advice. I appreciate it.
@christophjohnson37776 ай бұрын
I rebuilt my motorcycle after a wreck and sprayed it with raptor. Over a year later it's holding up great, and everybody that sees it compliments it.
@Steeles6 ай бұрын
I bet that does look good.
@janettavculek93086 ай бұрын
I think you did a good job. Looks good.
@Steeles6 ай бұрын
Thank you
@michaelfrench3436 ай бұрын
Looks dam good, im going to do my Jeep Cherokee, i may spray it a little farther back, see if it gives even more texture.
@Steeles6 ай бұрын
Oh yea. Let me know how it turns out. You can get a kit that you can spray with a air compressor.
@pabloski19644 ай бұрын
Great job Stacey, you are so genuine. Thanks for sharing
@Steeles4 ай бұрын
Thanks ya. Glad you liked it.
@brentrlarson41535 ай бұрын
I did my 89 bronco almost factory color blue and black love it turned out great
@Steeles5 ай бұрын
I bet that does look good
@anthonymauger93885 ай бұрын
Somebody told me many years ago put cans in warm,hot water makes paint easy to spray
@Steeles5 ай бұрын
Oh really. I haven’t heard that.
@theemeraldfox77792 ай бұрын
Works perfect that way! Been doing it for years.
@Steeles2 ай бұрын
@@theemeraldfox7779 I will have to try that.
@charless.33643 ай бұрын
Gotta love back water country Bois. "What's 20 x 7? Idk, you go figure it out. I never made it outta grade school."
@Steeles3 ай бұрын
lol. I was close
@Alpha-jg9mi4 ай бұрын
should have used the 2k spray raptor, it will last alot longer and way better texture.But it still looks great.
@Steeles4 ай бұрын
I will have to try that next time. Lol
@KingWear6286 ай бұрын
Looks good! Been dying to try this on my Tahoe
@Steeles6 ай бұрын
Do it. Lol. I think if you sand it good it should hold up good.
@johnlennon86535 ай бұрын
Did this to my Harley and it worked great. I cleared over the bug splats ,so now I have a unique paint job after ten years!
@Steeles5 ай бұрын
Oh yea. lol. Custom paint job.
@craigbrandon46112 ай бұрын
Ty got me an old Nissan. I’m going to do the same thing. Appreciate your simplicity because I’m going to do it exactly the same.😝🍻
@Steeles2 ай бұрын
Oh yea. Let me know how it turns out
@10ring60-bp5ml4 ай бұрын
hey guys wear that dust mask, i did body repair longer than you are old, they work cool video
@Steeles4 ай бұрын
I know. I will start wearing one.
@RichardBoling-tk4pj5 күн бұрын
I like it man as you shouldn't have to ever worry about rust now although I would love to see how it would look with a gloss clear coat sprayed over it
@Steeles5 күн бұрын
Probably gonna need some thick clear coat to cover that. Lol
@RichardBoling-tk4pj5 күн бұрын
@@Steeles true I didn't quite think of that but i think it would look killer if glossed over
@Steeles3 күн бұрын
@@RichardBoling-tk4pj Yea it would. May have to pour the clear on to get it thick enough. Lol
@mattbarrett414 ай бұрын
I’ve used the kit with a compressor. After using acid etch primer, it did a great job. I like it because in the rust belt normal auto paint doesn’t hold up. I also would have taped the door handle
@Steeles4 ай бұрын
Yea I have new handles for it.
@virgilpalmer24272 ай бұрын
I love when men do videos like this, thanks 👍
@Steeles2 ай бұрын
Thank ya
@joeschelebo41904 ай бұрын
Looks good.
@Steeles4 ай бұрын
Thanks
@Home-ed6zg4 ай бұрын
Looks Brilliant, Nice job.🙂👍
@Steeles4 ай бұрын
Thank ya
@caspar07774 ай бұрын
Did the trunk of my transam with 2 cans of raptor. Looks clean and strong.
@Steeles4 ай бұрын
Oh kool.
@lucabrasi50702 ай бұрын
Pretty cool looking
@Steeles2 ай бұрын
Thanks :)
@jn74204 ай бұрын
Looks good!!
@Steeles4 ай бұрын
Thank ya.
@exerperez4205 ай бұрын
Good job 👍 🇺🇸
@Steeles5 ай бұрын
Thanks
@craigroush51863 ай бұрын
Looks good. Working on my truck now, in the bed though.
@Steeles3 ай бұрын
Bet you are having a blast. Lol
@1blkgsdАй бұрын
Nice short box.
@SteelesАй бұрын
Thank ya
@rgthomson14 ай бұрын
Great job with using a can, im surprised how good it turned out
@Steeles4 ай бұрын
I know it. I was surprised too
@antonioserna83524 ай бұрын
Looks very good considering its a liner spray.
@Steeles4 ай бұрын
I think so too. Thanks
@davidrogers84012 ай бұрын
Nice job
@Steeles2 ай бұрын
Thank ya
@christofffer4 ай бұрын
Is this lil Leon lush 😂 Good video brotha
@Steeles4 ай бұрын
lol. I will have to see who that is. Haha. Thanks. I think.
@christofffer4 ай бұрын
@@Steeles check him out he’s friggen hysterical!
@Steeles4 ай бұрын
I will. Thanks. Lol
@sandslinger67204 ай бұрын
Im about to do this to the frame on my bumper pull toy hauler!
@Steeles4 ай бұрын
Oh yea. Should work good
@leafpirate5 ай бұрын
Looks pretty nice tbh, esp for a rattle can. What is that applicator thing you had on the can? Is that a Raptor product or is it for spray paint cans? Also, is this Raptor Liner the same as the company we have up here in Canada?
@Steeles5 ай бұрын
Thanks. You can get that handle at pretty much any hardware store. I’m not sure. It’s say’s Pennsylvania, US on the can.
@davidgentz17315 ай бұрын
Now you got a buddy you got to keep that wet Edge
@Steeles5 ай бұрын
I hear ya. Lol
@Mg-edc4 ай бұрын
I wonder how this would actually work ,spraying the black trim that has faded on my vehicle?
@Steeles4 ай бұрын
I don’t see how it wouldn’t
@TheLastSpartan044 ай бұрын
Thought I was on the JomBoy Media channel for a sec
@Steeles4 ай бұрын
Lol
@donchez75125 ай бұрын
the time it took you to tape off the light you could've taken out the 2 screws to remove it faster🤣
@Steeles5 ай бұрын
lol. I didn’t even think of that. Haha.
@donchez75125 ай бұрын
@@Steeles lol!!!good stuff though👍
@MidnightPolaris8005 ай бұрын
Dude that looks sweet. Did you tape off your key hole in the door?
@Steeles5 ай бұрын
I didn’t. I have new handles and locks I have to put on it. Trying to get her fixed up.
@jodyhendrix93454 ай бұрын
Looks good
@Steeles4 ай бұрын
Thank ya
@lilbitofeverything85734 ай бұрын
How many cans did it take. Thinking of doing it to my 98 ram
@Steeles4 ай бұрын
7 cans total
@shineeye48966 ай бұрын
I bought an ugly red ‘72k20 cause I need to tow my boat and possibly get to my aged parents in a summer or winter storm. Hate the color and am tempted to do this after seeing your vid. Update on how well it holds up???
@Steeles6 ай бұрын
Oh yea. I will. Time will tell. I think it will be fine. I think you can get other colors.
@nickp.24323 ай бұрын
How many cans did it take
@Steeles3 ай бұрын
7 all together
@thibaultarnould72415 күн бұрын
How much can does it took for the whole car ?
@Steeles4 күн бұрын
7 cans.
@thibaultarnould72414 күн бұрын
@@Steeles Thank you ! Appreciate ! Great to see that some good results can be achieved
@Steeles3 күн бұрын
@@thibaultarnould7241 oh yea. After the sanding it’s easy. Lol
@mikesigncarver380329 күн бұрын
How’s it holding up?
@Steeles27 күн бұрын
So far so good. No peeling.
@stevenlengyel97015 ай бұрын
It’s ok
@Steeles5 ай бұрын
Lol
@_DB.COOPER4 ай бұрын
Naw.
@Steeles4 ай бұрын
Oh yea
@giles-df9yu4 ай бұрын
I sprayed my vw bug with that and converted it into a Ford powerstroke
@Steeles4 ай бұрын
Dang. Lol
@rhinohorn994 ай бұрын
🤩👍👏👏👏👏👏👏
@Steeles4 ай бұрын
Oh yea. Lol
@shadowlord55745 ай бұрын
Why would you do this to a truck, every truck I've ever seen with that spray liner on the body panels is ugly AF
@Steeles5 ай бұрын
This is what’s in now. You gonna have to get on board. Haha.
@johnnyford98394 ай бұрын
The spray is misleading. It didn't turn that Chevy into a Raptor...
@Steeles4 ай бұрын
Lol
@RealDonLarson4 ай бұрын
Great video. I like your “running commentary” on various subjects. Makes things interesting and is often funny. Subscribed to your channel ! Us Mississippi folk gotta stick together.
@Steeles4 ай бұрын
Thanks Don. I appreciate it
@mftatvop6 ай бұрын
Just an idea, maybe spray some in the bed since it is liner?
@Steeles6 ай бұрын
Looks like someone already did, it’s peeling off. Lol. I don’t think they sanded it. Have to work on that next.
@jerrymarasco88785 ай бұрын
Lol
@UncleFjester5 ай бұрын
🤣
@paulmac6144 ай бұрын
great idea !
@Steeles4 ай бұрын
I’m going too! Lol. What color should I spray the bed?
@davids111311135 ай бұрын
I did the hood and top of my Tacoma the clear coat was all peeling with the Rustoleum bed liner it works pretty good and tough for sure.
@Steeles5 ай бұрын
Yea I have used that before. It works too
@MrBreeze20244 ай бұрын
I have a 2004 taco and I’m getting ready to do the same thing my friend
@davids111311134 ай бұрын
@@MrBreeze2024 Yep, pretty quick I just cleaned the hood and top then sanded well with 100, washed it again let it dry good then taped it all off and painted took about 2 hours total and looks great 👍
@Steeles4 ай бұрын
Have to let me know how it turns out.
@davidreynolds30825 ай бұрын
I sprayed the bottom half of my Grand Renault Espace with truckbed liner 2 years ago. I got fed up of it being spattered in tar and tarmac from all the freshly-repaired potholes etc.
@Steeles5 ай бұрын
I’m hoping mine holds up well. So far so good.
@on-site40944 ай бұрын
3m products are #1 in quality & price
@Steeles4 ай бұрын
What 3m product are you talking about?
@brittballard40305 ай бұрын
I shoulda got the raptor brand when i did my dodge but i cheaped out and got the gallon rustolem brand after about a month it turned brown and looked like crap you definitely made the right choice
@Steeles5 ай бұрын
Yea I have used that rustolem brand. It does turn brown.
@Ghostrider-715 ай бұрын
Looks good, nice job. Thanks for posting.
@Steeles5 ай бұрын
Thanks
@davidleslie9492 ай бұрын
12 to 18 inches away from the service to be painted is what the instructions will tell you, and it is highly advisable to follow those instructions in order to achieve best results with no lines and lots of uniform textured, as it was meant to be sprayed and look. it was fun to watch you'll get better... lol can't get worse really
@Steeles2 ай бұрын
Thanks. After it cured out it looked really good
@EC-mc7vg5 ай бұрын
I like the matte look, you did good with the rattle cans. I've got an old 1999 Chevy 1500 3 door cab pick-up I'm about to get ready as a hunting rig. It is white and would stick out like a sore thumb while coyote or hog hunting. I'm probably going to use the Raptor Liner in some sort of green and the matte finish will be great for night hunting.
@Steeles5 ай бұрын
Oh yea. That would look good.
@jayadams56035 ай бұрын
I think you did a great job! And it looks good! Do you think it would adhere to fiberglass? I have a 20+ year old motorhome with a fiberglass front lower, and the paint is flaking off. I think this would be better and a lot cheaper than repainting.
@Steeles5 ай бұрын
I think it would be fine as long as you sanded it good. Probably 180 grit
@lukequigley1215 ай бұрын
Body man for a independent import repair shop in " 79-82 and a 66 pug nose Chev van (mine)had lower rot .. Not worth a great job so "tiger hair and bondo job.. Needed to cover some "rough work so used the 3M body shutz gun w/ a gallon of mobile home roof paint black and spray it all.. Thinned w/ lac thinner i put 3 coats and covered nice..Thats my "cheap n dirty , just to cover " story.. Got a few years till the 6cyl blew..
@Steeles5 ай бұрын
Oh yea. I have never used any of that roof paint.
@donalddday77415 ай бұрын
i did the grill and hood of my 94 jeep xj with Rustoleum mat black cause the clear coat was coming off 3 years ago and has lasted plus even has got a little flat in color gonna do the top clear coat starting to come off may do the whole thing later
@Steeles5 ай бұрын
Oh yea. I bet that looked good.
@dustinryan96715 ай бұрын
I did this to my Chevy Duramax but i bought the cans that you hook to a sprayer. I like it a lot don't have to worry about scratching or anything else.
@Steeles5 ай бұрын
Yea I seen that kit. I may have to try that on something else. Lol.
@Ms.Frankenbuilder4 ай бұрын
Nice job.
@Steeles4 ай бұрын
Thank ya.
@stevenlengyel97015 ай бұрын
I had a Chevy and the paint was terrible if I still had that truck I might try this.
@Steeles5 ай бұрын
lol. Oh yea.
@voidisyinyangvoidisyinyang8855 ай бұрын
especially if you live in the rust belt - whatever stops the rust - spray it on!!
@Steeles5 ай бұрын
There ya go. Lol.
@DrSammyMunchkin5 ай бұрын
Fabulous job. ✌
@Steeles5 ай бұрын
Thanks:)
@alexhayes33344 ай бұрын
Flat black trucks are awesome..
@Steeles4 ай бұрын
No doubt
@checkfoldcallraise16 күн бұрын
Nice look! I’m considering doing this to my ‘02 Tundra. It has the boring faded gold factory paint lol. I subscribed to see more, plus you were at 666 subscribers 😮 I chased the devil away for you 😂😂
@Steeles16 күн бұрын
lol. Maybe I will get some more. Hey it’s holding up great. No peeling. Still looks good.
@AdamWest-og6zp8 күн бұрын
Yeah boy. I hate sanding so much. Even with a grinder. I'd be using a grinder lol.
@Steeles8 күн бұрын
May paint wasn’t to bad. If it had a lot of bad spots I would have.
@randybichsel42445 ай бұрын
Thats about as Jethro as can be...
@Steeles5 ай бұрын
Hey don’t hate on the Beverly Hillbillies now. Lol.
@KenMoore-y8o4 ай бұрын
Uncle Jed would be Proud 😊
@Steeles4 ай бұрын
@@KenMoore-y8o No Doubt. lol
@bob-j1t6 күн бұрын
maybe someone can ad color to the bed liner spray paint like red or blue yellow ? great job!
@Steeles6 күн бұрын
Oh yea. Lol
@dougsamson38244 ай бұрын
I’ve done a couple jeeps for people with herculiner it is durable. But I would prime first.
@Steeles4 ай бұрын
Oh really. I haven’t used that before.
@williamhelms99425 ай бұрын
Richard on What The Rust channel uses it, too.
@Steeles5 ай бұрын
May have to check that out. Thanks.
@silviuflorescu68383 ай бұрын
It looks you used the 1K raptor, not the 2k version. 1k is not such good..
@Steeles3 ай бұрын
It’s held up good so far. Time will tell.
@ufuk_yesildag2 ай бұрын
After how many hours did you remove the masking tape?
@Steeles2 ай бұрын
Probably about 10 mins after spraying.
@briancox11362 ай бұрын
Dumb question: Did this change you gas mileage at all?
@Steeles2 ай бұрын
Haven’t noticed any difference
@ronaldgriffin69636 ай бұрын
Looks good Stacey gives me a idea for the rusting out spots on my ford
@Steeles6 ай бұрын
Oh yea. It should do the trick. Lol.
@toodjackson44385 ай бұрын
Don't do it it will work for a while until one day next thing you know you don't have any more metal left under the bed liner
@MrMedley663 ай бұрын
Is this guys last name…. GUMP ?👽
@Steeles3 ай бұрын
Forrest…. Forrest Gump.
@tommak65163 ай бұрын
How do you buff it out to make it shine?
@Steeles3 ай бұрын
lol. Slowly.
@donlew82224 ай бұрын
Lol Shoulda gone to Amazon...
@Steeles4 ай бұрын
May have to next time
@jonwilson85043 ай бұрын
You should matte clear it, that kind in the can without out the hardener will brush off. That's way it's not textured. Try the 2K version or shoot it with a Shultz gun at about 50 psi. I use the stuff you're using for touch up; Looks good though
@Steeles3 ай бұрын
I will have to try that. Thanks.
@wabowhunter833 ай бұрын
My entire daily is raptor lined... I used the gun though.
@Steeles3 ай бұрын
Did it turn out good?
@wabowhunter833 ай бұрын
@@Steeles ya itooks awesome. Cost about 800 in product to do the entire truck
@LarryVeblungsnes4 ай бұрын
That is ridiculous.
@Steeles4 ай бұрын
Nah. It’s not. Lol
@JayGBee4 ай бұрын
I love that truck and btw buddy 7x20 is 140 😂
@Steeles4 ай бұрын
Thanks. Yea I figured that out. Haha
@JayGBee4 ай бұрын
@@Steeles 🤣all in fun brother
@Steeles4 ай бұрын
Oh I know. Lol. Hey $140 is better than $240.
@butchkuefel75034 ай бұрын
Strong work 🫡💪👍
@Steeles4 ай бұрын
Thanks
@MegaWeagle4 ай бұрын
Im pleasantly surprised at that result. Id be happy driving around in that when i was done with it.
@Steeles4 ай бұрын
Oh yea. I have been. Lol
@keithwatson82284 ай бұрын
That's a Silverado. Not a raptor.
@Steeles4 ай бұрын
It’s a Raptor now. Lol
@keithwatson82284 ай бұрын
@@Steeles 😢
@jamieblake28232 ай бұрын
I like it. 👍
@Steeles2 ай бұрын
Thank ya
@russfinley76742 ай бұрын
Aaaaaannnndddd how are you going to lock the door? Seeing as you sprayed the lock shut!
@Steeles2 ай бұрын
Nah. It works fine. Lol
@russfinley76742 ай бұрын
@Steeles lol good video! I'm getting ready to do my dump trailer!
@Steeles2 ай бұрын
@@russfinley7674 Oh yea. Are you gonna use the rattle can or the bigger kit?
@russfinley76742 ай бұрын
@Steeles it's only a 6x10 light duty but I live in New York so everything gets salt cancer! So I'll probably rattle can it!
@Steeles2 ай бұрын
@@russfinley7674 Oh yea. Should work good.
@666dualsport4 ай бұрын
why??
@Steeles4 ай бұрын
Wanted something that would last. Lol
@donalddday77415 ай бұрын
had the lines but they all went away after a could of days to completely dry,
@Steeles5 ай бұрын
Yea mine went away too
@poorfolks14 ай бұрын
Why
@Steeles4 ай бұрын
Wanted something tough. Lol
@terryrideout74573 ай бұрын
Thanks 4 posting. Great job.Awesome truck
@Steeles3 ай бұрын
Thank ya
@tonywest81402 ай бұрын
I like it. Great job. Thanks for the video.
@Steeles2 ай бұрын
Thank ya
@gtmddn4 ай бұрын
Some people shouldn't be allowed to breath
@Steeles4 ай бұрын
Well… Ok then.
@gtmddn4 ай бұрын
@@Steeles listen I know that sounded harsh. But think about it. Why do you take the time to do the prep work. Sand it down wipe it down all that crap. Then you make a mistake In the painting and you create an overlaping line. And your solution to fix it is. "I'll go back over it with a continuous motion" this is where my comment comes into play. Do you honestly think that the over lap build up is only going to accept the new spay where it's not built up. No. The reason there is a line is because that's where 2 coats have been sprayed. Putting another coat on only makes it go from 1 coat to 2 coats. To 2 coats and 3 coats. There is a reason paint shops get crazy money for what they do.
@Steeles4 ай бұрын
@@gtmddn Oh Yea. Make us a video and show me the correct way.. Be glad to watch it..
@gtmddn4 ай бұрын
@@Steeles nope see that again is where my original comment comes into play. I would never make a video of me showing people how to paint. Because I know that I am not that good at it. I know what's supposed to be done. But knowing how to do something and being good at actually doing it is two different things. Like I said. Maybe to harsh on my original comment. You keep rocking videos and don't let people like me detour you.
@ZIGZAGBureauofInvestigation5 ай бұрын
Nice work ! Im going to do my 2001 Chevy but in white to match it current color. How did the colors blend in ? and streaks showing. Should I can-spray it or airspray it ! Thanks
@Steeles5 ай бұрын
Oh yea. That would look good. I can’t see any lines in it. If you have an air compressor it would probably be better to air spray it. But the cans turned out good. Just takes a little longer.
@ZIGZAGBureauofInvestigation5 ай бұрын
@@Steeles Cool after spending a good $4000 on rebuilding suspension, shocks ,ball joints,wheel hub bearing,control arms, etc bushing,tires,windshield and a dent / never been in a wreck. All it needs is a paint job, old paint is flaking off/ w/very little wheel well rust. Im so happy with this 2001 chevy ext cab ,family Truck, its runs like new, 223,000miles doesnt burn oil/22-23mpg. I saved myself some $80,000 = cost of new truck.
@ZIGZAGBureauofInvestigation5 ай бұрын
also I cant see paying $5000 to [$21,000
@Steeles5 ай бұрын
Yea. Those paint jobs can get expensive $$$$$$. Lol
@itscomplicated55074 ай бұрын
More money than common sense.
@Steeles3 ай бұрын
Thanks
@chippy33able4 ай бұрын
Turned out good ! Thsnks eh
@Steeles4 ай бұрын
Thank ya
@charlesforbin69376 ай бұрын
BUT......HOW LONG WILL IT LAST?
@Steeles6 ай бұрын
Time will tell. I will yal updated on it.
@elgenetiamzon10626 ай бұрын
No one likes sanding.
@Steeles6 ай бұрын
Need me a air sander. Lol.
@Bushmaster854 ай бұрын
Git-R done!
@Steeles4 ай бұрын
Oh yea
@contractkiller68633 ай бұрын
The VGG vibes are strong with this one
@Steeles3 ай бұрын
Gonna have to tell me what VGG is.. lol.
@contractkiller68633 ай бұрын
@@Steeles Vice Grip Garage, another great channel like yours.
@Steeles3 ай бұрын
@@contractkiller6863 oh ok. I will have to check them out. Thanks.