I tried 3D Printing with REAL GOLD......

I tried 3D printing with REAL 14K Gold Dust, copper, iron and even wood. Get $30/ £30/ €30 off with the code M5CJRE30 on M5C Order on Amazon: ankermake.club... Order on Ankermake: ankermake.club... AnkerMake M5C is a 3D printer designed to easily customize functions in one click. It is available for purchase for $399 in the U.S. Pre-sale availability starts today in the UK (£399) and in the EU (449€), as well. Huge thanks to AnkerMake for sponsoring this video. Previously 3D printing has been pretty difficult. Setting up a machine, leveling a print bed... but now - with the new 399 dollar AnkerMake M5C joining the fray with ultra fast prints and an auto leveling bed... a first timer can be up and running in as little as 10 minutes. I think this AnkerMake M5C is the best 3D printer for beginners. (or for anyone who loves making stuff, but hates setting things up...) While the gold filament failed - we did manage to 3D print with Copper, Iron, and even Wood filaments. It turned out better than I thought!
Get my JerryRig Razor knife HERE: www.jerryrigkn...
Follow me for updates!
Instagram: / zacksjerryrig
Facebook: on. 1U4bQqv
Twitter: / zacksjerryrig
LARGE tool kit: amzn.to/2DURcr7
Travel Tool Kit: amzn.to/30LKXOY
Mega Tool Kit: amzn.to/2OwequL
Plastic Pry tools: amzn.to/1Tu57pI
Metal phone opening tool: amzn.to/1WdOFv0
The camera I used to film this video: amzn.to/2p7GtkX (GH6 amzn.to/3LyfW8d)
The Lens I used for this video: amzn.to/1QOXDw2
Wide angle lens: amzn.to/2qiYM4u
And this Metabones adapter: amzn.to/2iZ67Ty
This is the drone I use: amzn.to/3JEuTXs
TO SEND ME STUFF: See my P.O. Box on my 'About page': www.youtube.co...
JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.

[@justins4274]

I tried jerry rigging my bank account but it didn’t work.

[@alanroy2228]

Whhatt

[@JustNel]

😂😂

[@michaellacey9653]

A rating of four nice, juicy burgers for that comment 🍔🍔🍔🍔

[@Oma_Ender]

Mine just stole $300 from me instead

[@isaacmagana7078]

You know what else is ultra fast? Gear 5 Luffy vs Kaido!

[@AttilaGara]

2:56 Kudos to anyone else who noticed that for a few brief moments Lady Liberty lost her torch. :D

[@D4vidPgc]

3:51 you can see the broken one in the background😂

[@FAB1150]

I'd recommend getting a hardened nozzle for wood filament (and probably the other filled ones), as it quite literally sands down normal nozzles during printing!

[@michaelramos4482]

3D printing is something that should be completely mainstream. The ability to print literally anything you want, from home, is absolutely astounding. My favorite prints are like your wheelchair caps. Something you don't necessarily notice, but is a quality of life improvement for almost nothing.

[@JerryRigEverything]

Hey @Michaelramos4482 you want the gold dust? Send me an email JerryRigEverything at gmail *AND* respond to this comment once you do.

[@hiiajeeuwhauioe]

@@JerryRigEverything michael you really need to respond quick

[@daylightbuilds5594]

Poor guy

[@ericbeeler1512]

I'll be your gold dust huckleberry...

[@ServentofTheMostMerciful]

Blud

[@xandrix3603]

It's great to see how much 3d printing has improved over the last 10 years, and how the price has fallen so much. Thanks for the video Jerry.

[@JealY666]

The only bad thing about these brilliant new printers is that it makes me feel bad for owning an older Ender 6. Such good advancements in the 3D printing scene, love it.

[@ThonREvolAlEiN]

i own an ender 3 that i recently repaired.

[@nando03012009]

I still have and ender 3 lol.

[@nando03012009]

I prefer resin printers. They are faster and print in better quality.

[@JACKYMOTO]

​@nando03012009 is it not a lot more work tho,and you deal with chemicals?

[@Fejszi]

Believe me, with a klipper upgrade that thing would smoke this over advertised piece of crap

[@DeadeyeJago]

I had no idea you could 3D print with wood. Honestly, for 400 bucks I'm pretty impressed with what Anker has made here. Good job Anker.

[@carloscobian3989]

And wood filament smells so good, like burnt wood of drilling or sawing.

[@lemontron]

Not good job Anker, this printer actually sucks!

[@chrisrupert1042]

Dude, I've just discovered your channel and am IMMEDIATELY in Love with it! I line the in-depth descriptions and explanations while still being expedient and also love the type of videos you offer. I've already subscribed after just the first 30 min of knowing this channel existed. Props on supplying water to the foreign community

[@JerryRigEverything]

Thank you!

[@shristikumari8084]

I invite you to come and accept Islam and pave the way for heaven ..

[@pablodomenecholiver4978]

So cool to see how 3D printers have evolved in such a short amount of time, very excited to see what's coming in the next few years.

[@SlightlyLessFat]

$399!? Thats an insane price for a 3D printer! What a cool way to prototype and save money for you guys and then passing that along to those who are in need of wheelchairs and other mobility devices you produce. I am always in awe of you and Cam with what you do with your resources. Plus, your videos are super entertaining and insightful. Happy you are here in Utah making this state what it is.

[@LET4M4RU]

399 bucks is great, however 449€ is making it a hundred dollars more expensive in Europe, that's crazy

[@Gojira_Wins]

It's a good printer for sure but there are cheaper offerings out there for less that do much more. For example, I own the Elegoo Neptune 4 Pro and that cost me $299. $100 less than this printer and has bells and whistles that this printer doesn't have. For someone who would just print random doo-dads, this is fine but anything else, they should buy something better.

[@jackbennett8881]

Crazy to see how far 3D printing has come! Kudos to you, creating inexpensive alternatives for the masses 💪🏼

[@misterio19]

The plastic-copper filament looking soo good, I'll try it on my printer, thanks!

[@DakotaMN100]

Love 3D printing! It is so convenient for tools, decor, and utility. I had a bookshelf missing pegs and was able to print all of them myself. I've also printed a desk cable tray, multiple character models, stands, RasPi cases, and even fidget toys! Color changing filament infinity cubes ftw!

[@terminated_account_09.24]

You should do a durability test on the 3D-printed objects. It would be really fun to test their durability and scratch resistance.

[@aldovalderrabanojr.9490]

Its impressive how 3D printers had advanced to be pretty affordable.

[@jurematoh]

I bought a Bambu Labs P1P and an AMS unit and couldn't be happier! This is a revolution in FDM printing - the speed, the quality and the multicolor option - my previous Ender 3 cannot even compare to this. Heard good things about Ankermake as well!

[@mater-jn4dd]

The video was fantastic, and I encourage you to continue producing such high-quality content!

[@JoeMecca]

3D printing is pretty sick, can't believe how far it's come in the last 5 years

[@Charles_Mcgee]

Would love to see more about the complex procedure of making filament. Real gold inside of filament sounds so awesome.

[@SHKEKEKE]

Dr flo just did a video on making filament

[@tsurgco]

Fun fact! 1+1=2 was proven in the Principia Mathematica, written by Alfred North Whitehead and Bertrand Russell, and was published in 1910, 1912, and 1913.

[@BorderFun999]

Crazy to see how far 3D printing has come, Unbelievably cool! Keep up the good work :)

[@DanNguyen-ey5tw]

The university of Maine are attempting to build affordable housing using 3d printing using reusable materials. So far it looks fantastic. They want to test the sustainability through the winter months. If this can be perfected, many people can design their home for an affordable price. Hope this builds steam. But yea 3d printing has come so far.

[@CheLaLuna]

Great video! It’s interesting to see the different materials you were able to successfully print with, even if the gold filament didn’t work out.

[@Wezzzyboy123]

this was awesome! ive always wanted to print in metal filaments, but ive always been to nervous to do it. but after seeing how well it worked, imma give it a try!

[@EddysReviews]

I now know why there is "Everything" in JerryRigEverything. Well he has basic to advanced knowledge in pretty much everything from teardowns of smartphones, laptops, building cars, boreholes, 3d printing, basically Everything.

[@user-zq1kh6yx6f]

I must say I'm thoroughly amazed by how user-friendly the AnkerMake M5C 3D Printer appears to be! It seems like an exceptional option for novices such as myself. Owning a 3D printer has always been a dream, and this model seems like the ideal investment. The video was fantastic, and I encourage you to continue producing such high-quality content!

[@liquicitizendirk2147]

If you're interested in getting one, you can also take a look at what bambulab offers. I personally own a AnkerMake M5 though and I'm perfectly happy.

[@AnkerMakeBrandTeam]

We strive to be as user-friendly as possible. Whether you're a beginner or a pro at 3D printing, the AnkerMake M5C is a great choice! Let us know if you have any questions.

[@MikeLei]

This is really impressive given how cheap it is. 3D printers really evolved a lot during the past few years. I might actually consider buying one for myself.

[@sahilrizvi3711]

this man has come so far and i have nothing but love and respect for him❤

[@davy9802]

ive been watching your channel for many years and ive enjoyed the hummer project

[@patrickgrady8487]

Anker really does make some great products! I'm really surprised how well those prints came out, definitely on par with more expensive printers. I think it's about time for them to become sold in big box stores!

[@materx2668]

After watching this video, I'm really impressed with the AnkerMake M5C 3D Printer's user-friendliness! It seems like a fantastic choice for beginners like me. I've always wanted to own a 3D printer, and this one might just be the perfect investment for me. Great video, keep up the good work!

[@DanDelzell]

Jerry is not only extremely talented, he seems to be a genuine nice guy.

[@renofumi28]

Again and again, his name is NOT Jerry.

[@Memeboiproductions]

bro really wants that gold

[@HarrisonDavies]

I"m finally excited by a reasonably priced 3D printer. Thank you.

[@brayden9664]

It’s actually crazy how many different products Anker has successfully expanded into

[@unloveableandre]

and all started with great battery banks and cables

[@karangupta3394]

I wish they sold their products in India , but sadly they haven't yet.@@unloveableandre

[@MixedGoku]

You got to just love the things that are being created in our time.

[@0552131]

Anything Anker! The woodfilament sounds amazing!

[@TheSupermUniverse100]

5:05 Eventhough the high temperature nozzle is good for those materials, this printer lacks an enclosure. ABS, PETG and TPU will be more difficult to print as a result, but not impossible.

[@joshj392]

This is great, Zack! Hope this Ankermade is ready for primetime!

[@robertaccess]

nice printer. I'm thankful to this channel for making these high quality videos for free.

[@DavidHar]

3D printers are getting more and more impressive

[@QEElevators]

In my opinion a better option over the M5C with more features and for less of a price is the Anycubic Kobra 2 Pro. 300$ and runs 300mm/s standard and up to 500mm/s. Same type of assembly and it can do 15 min quality benches. It also has WiFi, a touchscreen, and a ton of other features.

[@Critters]

Why do you think the gold filament failed? Was it the gold dust or the setup? Were the grains too large? You can electroplate 3d prints if you first prime the surface with a conductive primer.

[@eddieburress8582]

Thank you for sharing the 3-D printing. This is so cool.

[@19Daantje98]

I've had my Ender 3 Pro for a few months now and I thought it was impressive. But seeing how far we've come with 3D printer tech is amazing

[@MGE_FixFirstLook]

There’s no 3D printer that uses pure gold filament because gold is a dense and costly material that can’t be extruded like plastic or composite metal filaments. However, there are indirect or alternative techniques to 3D print objects using gold: -Filaments with gold particles: Some filaments contain tiny particles of precious metals like gold mixed with other materials like plastic. These filaments allow you to create objects with a golden shine, but they’re not made entirely of pure gold. -Indirect 3D printing (Lost Wax Casting): You can use a 3D printer to create a wax or resin mold, then use the lost wax casting technique to make a real piece of gold. This method is commonly used in jewelry. -Binder jet: Some industrial 3D printers can print on metal materials using an agglutination process, but then the printed parts need to be sintered in a furnace to become solid metal. However, this process is also complex for materials like gold. For pure gold pieces, technology still relies on traditional casting processes rather than 3D printers that extrude directly.

[@Bloody.Champagne]

I Love the way you take care your Wife..❤❤ Love you sir..❤

[@kbuxtonator5052]

that's crazy! i always saw 3D printing as an enthusiast project, but it's really accessible to the masses now!

[@zain2854]

Nice to see technology is improving so fast.

[@kyleo1236]

Printers have come a long way. My first printer didn't have a part cooling fan so it could only print ABS and was $500 about 10 years ago. I have a couple creality machines but got tired of working on them and recently got a bambu x1c and its leagues above. For the price, that anker make looks like it would be a great first printer. I doubt it can print some of the claimed filaments without warping though, like ABS and PC.

[@lisarockwell7615]

That's really cool!! My boyfriend of 12 years has been interested in 3d printing for a while now and he has one but it has not been easy for him to figure out (even though he is a CNC Machinist and has been one for 20+ years). So thanks for this video because now we can look into the 3d printer you used and buy one to see how much better it is than the one he has already.

[@miroslavfaist1298]

I have never thought I will see rusty 3D print. Cool!

[@CooCooEntertainment]

Thanks for the information brother 💯🤞🏾👑

[@Satya.N]

I seriously don't know what to do with that gold even if I get it 😂

[@Matheusdiodo]

all that glitters is gold, only the shooting star breaks the mold

[@rux_ton]

Out of curiosity what filament did you use for the statue of liberty? Or if anyone else knows. I really like how that turned out

[@AZCAMERAREVIEWS]

I have wanted to try 3D Printing for a while. This seems like a good entry level machine and you can't beat the price. Possibly I can do a review on one. I enjoy your videos immensely.

[@pedro3ms1977]

Greetings from Portugal. Thank you so much for showing the potential of this printer. The video was really good. Keep doing good, good to others. As soon as I have the budget, I will put this printer as one of the potential choices, putting my Ender 3 for leisure work. All the best to everyone.

[@LiveLifeEveryMoment]

Every time I see 3D printing it simply amazes me as applications of this tech are endless.

[@TheCrimsonKnight.]

crazy how far 3d printing has come.

[@Crowned01]

Can't believe that printer only costs $399. It's crazy how fast 3d printer tech is moving.

[@Jagent]

I bought one of the old creality 3d printers a few years back, and the thing has been nothing but a nightmare. I ended up gutting the thing and rebuilding it pretty much from scratch. That AnkerMake is really impressive to print at those speeds for that price.

[@streetstangcobra]

3D printing is like having small plastic workshop at your command, you are the manufacturer and also the end user

[@Mateusz-720]

4:53 I was fixing my printer and searched up some tutorials for my problem, when i fixed it i searched figdet toy and started print, then i started eatching the video, and guess whats being printed in the video? The exact thing in printing😅❤

[@megabrawndo]

I love this stuff. As someone who is getting into woodcraft, I am curious about the durability, strengths/weaknesses of wood filament.

[@mwalimuwawasanii]

That Ankermake is just amazing. Dayuuum!

[@georgeistraveling]

Wow! That 3D printer is revolutionary

[@dadouamir]

Awesome seeing how far the tech has come, love the copper experiment

[@musaka14]

That copper one after the oxydation looks amazing!

[@XavierMemes2739]

Amazing jerry, was thinking about metal input. U did it, great job

[@skittleskittle4838]

This 3d printer seems like a dream come true for its low price. I cant wait until the v6 color engine comes out!

[@Shaquille..oatmeal.]

What you are doing with the wheelchairs is amazing !

[@Mikey8567]

I've watched soooooo many of his videos and 90% of them are great, BUT the title and thumbnail are click bait! He actually never even attempted to print any thing gold as the title says because he couldn't get his home made filament machine working correctly. And I myself have the Ankemake M5, this printers big brother.

[@avilocke]

This is really cool. I've used those filaments before but now I need to try forcing the patina. Thanks for sharing!

[@bzcup]

We, EU buyers, are waiting for it. For now only the M5 is available in my country for like 1K.

[@you-know-who.]

Can't imagine what 3d printing will be like 10 years from now

[@Knoob_jockey]

That's awesome. 3d printing has come along way

[@neoyt5501]

Wow,3D printing is so much fun.

[@NannemSriHarshaSharma]

2:55 Bold statue of liberty at first time 😂

[@paulpinto5233]

Love the idea of using 3D printing for the wheel chair end caps in prototype development, very cool idea. Now give me gold!

[@ChrisFlorit]

Pretty crazy speeds. Very nice!!! Golden!

[@_p1tr1s_]

5:45 - Yes, very impressive, spilling all the gold. 👀😄

[@mikkojuvonen4636]

Amazing to see how fast the technology of 3d printers is advancing!

[@hoidoei1728]

Its absolute wonderful where the technology is going.

[@TimLF]

Do aluminum next; Fused deposition modeling (FDM) Laser powder bed fusion (LPBF) Electron beam melting (EBM) Binder Jetting Cold Fusion Wire arc additive manufacturing (WAAM)

[@Hodoodle]

We just ordered one for our school's new makerspace, looking forward to making students ideas come to life!

[@mbouffy]

Looks like a nice printer. I love the speed.

[@siddharthposwal3292]

Consider alloying the correct metals with gold, just as metals are alloyed with gold for jewelry. My mind was blown when I saw the 3D-printed wooden box and a miniature version of the Statue of Liberty.

[@o0oshreyes]

What temperature did you use for copper and what was your layer hight? Additionally if speed is a factor for your prints the you should check out resin printers

[@rmjrmj4]

I love what you do, keep making the world a better place.

[@joeherb8983]

Very cool to see the different media's available

[@ScottieVP]

Now I need a 3d printer... Thanks!

[@IraQNid]

To achieve such a fast print speed does the quality of the print suffer? What types of filaments can it use? I saw the sawdust, iron, and copper infused materials. What about the elastic, glow-in-the-dark, or other types of filaments? Can this be used to make lithophanes? How well does it work with machines that combine different filament colors and materials on the fly? Like from Mosaic's Palette machines? Does it have a 2-way to 4-way hot end feeder that essentially fuses different filaments on the fly from different spools? Making them into a many colored/textured filament kind of blended together or fuse the different feeds together end-to-end? Is there a wasteful purge block when changing from one filament color or material during the same print session? Does the company have a multi-head or multi-tool attachment for more complicated 3D prints or projects?

[@warlord1873]

What colour will the statue of liberty change to after the nice shade of green?

[@Gaarasonlylover4real]

This is totally different! I didn't know that they started making filament using metals. Imagine what that would be like as a 3D printed fabric! That's so fucking cool.

[@mikeberry885]

You said to leave a comment, besides love in your videos, there are very few people like you who are genuinely good God bless and keep up the good work

[@ralphzogheib]

What is the best 3d printer in your opinion? Can you do a full review video of the top 3 or 5 3d printers that you like the most, please?? :)

[@ADzoneanimation]

Who thought it was Okaruns Ball 🙂? or is it just me? ;-;

[@Fortayy]

I'm literally just here for that

[@ddemers6]

Very entertaining! Never realized the diversity of filament types that are available.

[@LandoCalani404]

Impressive, just impressive. So effortless.

[@BakeBakePi]

The copper 3d filament looks so cool

[@Bored_TV]

ive been wanting to get into 3d printing for wanting to make molds for car parts, so this is really awesome to see hopefully i can get a 3d printer soon and try these out myself