I UPGRADED the CHEAPEST Mechanical Keyboard in the world - E-Yooso K620

#Keybored #mechanicalkeyboard Welcome to Keybored! I UPGRADED the CHEAPEST $15 Mechanical Keyboard in the world - E-Yooso K620
Some time ago, I ran a poll to ask the viewers... What do you want to see me do? The overwhelming ask was "buy the cheapest keyboard and make it good." So I did just that... Browsing through various sites, I came across this gem (or monstrosity, however you want to call it) on Amazon for $25 minus $10 coupon... so $15... How can a hot-swap mechanical keyboard be $15? Is it good? Is it trash? Can I keep my track record going, or will I be defeated? Let's find out!
I also created a Discord Server so check it out!
/ discord
Chapters
Start - 0:00
Introduction - 0:11
K620 Details - 1:14
Stock Typing Test - 2:42
Let the MOD Begin! - 3:24
Modded Typing Test - 6:38
Final Thoughts - 7:34
Links to Products Shown in the Video
E-Yooso K620 Hot-Swap, Mechanical Keyboard (Price Fluctuates)
amzn.to/3nLColr
Mistel White on Black Doubleshot PBT Keycaps (OEM)
amzn.to/3lujCME
AKKO CS Switches
amzn.to/2XwY360
Uxcell Silicone O-Rings
4.5mm x 1.5mm x 1.5mm (Bottom O-Rings)
amzn.to/2QkttZO
3mm x 1mm x 1mm (Top O-Rings, Optional)
amzn.to/3eM2aAX
Noico 80 mil Sound Deadener
amzn.to/2OSZgjA
Foam (Zip-N-Fit) - Different Color, but works the same
www.target.com/p/con-tact-18-...
Oria Precision Screwdriver Set
amzn.to/3kwuF7e
KBDFANS - Various Keyboard Parts and Accessories
kbdfans.com/r?id=gj29u8
Shot on Sony A7 III + Sony FE35mm F1.8 and Shure MV7 Dynamic Mic
Sony A7 III
amzn.to/3cGUjma
Sony FE35mm F1.8
amzn.to/3bPHpTu
Shure MV7
amzn.to/2TXIpOO
A Quick Disclaimer - Some links I have provided are affiliate links that generate a small commission to support this channel. It helps me buy more stuff to create content if you shop through those links at no cost to you! Thanks for the support! :)

[@HipyoTech]

Channel name says Key"bored" but I am Key"excite" by this video

[@Keybored]

Haha thanks! Have to convince the overlords that the channel wasn't a spelling error lol. Great song by the way! Hope you have the full album soon!

[@HI-hy9nc]

Damn hipiyo that pun sucked

[@VNSX]

😐

[@hum___]

😅

[@CEngi]

damn that was cringe

[@antondoan6382]

Honestly I think that molding budget boards is one of the best ways to get into the custom mech hobby. There is such good value boards out there and its pretty easy to do.

[@CodeXCDM]

Agreed. Did the works on a Redragon K556 and while time consuming, I felt it improved the board A TON. No more ping and it sounds like a better board than some 50$ budget... Heh.

[@Keybored]

It's a great way to dabble without going too deep :)

[@CosmicApe]

That's why I love his video even on the Keychron Q1. You can make a lot of keyboards under $200 sound incredible. There's significant diminishing returns when you start spending more and more in this hobby.

[@RaisinBarXZ550]

I own an E-Element Z88 and it's my first custom mechanical, or at least sort of, since this is the board I learned a lot from as I've gotten new switches, keycaps, tried different mods like holee foam and tape mod, as well as lubing the switches, so yes, modding a budget board is a hell of a gateway drug.

[@1andonlyfaxz787]

@@RaisinBarXZ550 yo bro can you send the link to the keyboard

[@RimuKora]

Every bad keyboard you touch literally turns into gold. It sounds good!

[@Keybored]

:) Thank you RimuKora! Glad that this keyboard sounded good!

[@mikewazowski2803]

Decent is an understatement...

[@dean3134]

"DECENT"

[@RimuKora]

i have realized i said an understatement after watching more videos therefore i have edited my comment

[@croatiabend9308]

Vghbhuhi

[@zypper7213]

I think it's less that the keyboard is cheap (though $15 for any hotswap board IS a pretty good deal) and more that GMK sets are wildly expensive lol

[@Keybored]

Haha, another way to look at it!

[@Jason101---]

@@Keybored This board is exactly the redragon k552 but different case

[@byArteer]

The video I’ve been waiting for 🙌🏻

[@Keybored]

:) Hope it was worth the wait!

[@freezypop8799]

Bro, the memories are flooding back. I used to watch your Black Ops 2 videos, crazy seeing you here.

[@SamBoga]

As far as I know, the E-Yooso and Redragon has the Same ODM. This is basically a Redragon K552 but cheaper. Those Akko switches really changed the ball game and made the Boards with Outeumu hot-swap sockets much more feasible option for the beginners

[@tuahdanish1]

Ok, thanks

[@Keybored]

:) Yeah the Akko switches are also actually pretty good even stock!

[@SamBoga]

@@Keybored indeed. Wanting to see the new double bump tactile Switches they just released!

[@pepper9275]

I have the redragon k552 and I’m disappointed, I should’ve bought this keyboard

[@ulises-qm7ik]

I have a 552, The plate is different, it doesn't have that side rgb strip and you can opt for full rgb, Also the newly produced ones have a different font on the keycaps wich is a lot less gamer-y. but yes they are pretty similar

[@tamegaming1768]

I heard that sound test and I was like "No." mad props. Might have to get me one of these

[@Keybored]

It's so crazy how much you can improve something that starts off at $15... keep an eye out on the amazon store and the price fluctuates like crazy

[@trailfork7815]

@@Keybored this sounded amazing, I expected the sound to improve but not to this extent, the first THOCK really got me

[@zanaisu]

The word thock is overrated

[@heheheheheehhaheu]

@@zanaisu didnt ask

[@zachstonhail8908]

Can't wait to see Scott make thing sound better then my endgame 😭👍

[@zachstonhail8908]

Update just finished the video and it dose 🥲👍

[@Keybored]

:) what is your endgame?

[@zachstonhail8908]

@@Keybored Right now it's a tkc candy bar that's modded keyboard stlye 😎

[@Wiktan]

@@zachstonhail8908 congrats, nice choise. Typing atm on my budget king and personal endgame - KBD67 Lite + MDA Plastic keycap set + LF Dusk panda linears + Durock stabs

[@chunkymilk1288]

@@zachstonhail8908 A man of culture…

[@itscasualdave7922]

I really enjoy you modding really cheap stuff like this. You should really consider more content like this!!

[@Keybored]

:) Thank you Dave! Will try to balance out my content for wider coverage :)

[@cstill]

I've just been getting back into keebs recently and god I just love your videos so much - no bloat, no filler, just content. I get my Boba U4Ts and Keychron Q1 in a few days and I hope I can make it sound as good as you did in your modding tutorial from last week

[@Keybored]

Thanks cstill! I really hope the Q1 turns out amazing! From my experience with it, it is one phenomenal keyboard in terms of what it's able to offer at its pricepoint :)

[@halfpennyc]

As usual you made this keyboard sound like a dream. The design of this board and keycaps really resembles the Reddragon K552. When I had that board originaly i bought a super cheap USB-C daughterboard and used black sugru to make a removeable UB cable port! So if someone wanted to try that, it definately works!

[@Keybored]

That is a great suggestion! Then you can really elevate this even further!

[@tomh2053]

As a keyboard noob, can you explain what a black suguru is and how you used it to make the port? Or a little overview of the process? I'm hoping to turn this keyboard into my first project and would love more ideas and things to try with it!

[@uhmwipe.]

I just found this channel and watched a bit of videos and this channel is criminally underrated, your content and format is really nice and entertaining to watch! You got my sub!

[@Keybored]

Thank you so much for the sub Rust! I really appreciate it!

[@Awesomesauce82]

I am genuinly impressed by your modding skills, Keep it up!

[@Keybored]

Thank you so much!

[@emirx1126]

Great video. The keyboard sounds great. I think this will be my starting point to get into the custom keyboard hobby. Thank you.

[@Keybored]

:) You're very welcome!

[@HouraisanShijuunana]

wallet drained pog

[@TheMike90a]

Absolutely amazing job on this, it sounds pretty damn great. Well done!

[@Keybored]

Thank you Mike! I appreciate it

[@MrRuufs]

This is the real beginners step to getting into customising keyboards. Well done.

[@895takashi]

Stock actually doesn’t sound bad, aside from the hollow pingy ness

[@trailfork7815]

still sounds better than a stock razer HUNTSMAN V2

[@tzershernkhaw5054]

@@trailfork7815 damn can I upvote this 9000 times

[@itst1998]

@@trailfork7815 I am pretty sure you can read minds. I was thinking the same thing

[@hehe123okay]

@@trailfork7815 T R U E

[@Keybored]

:) It's a good keyboard for the price, and with a bit of TLC, it got much better!

[@NIDEKOkb]

Bruh wth!?!? I just uploaded a video on this yesterday! Talk about timing! Love the vids Scott ❤

[@Keybored]

Thank you NIDEKO! Hope yours turned out great also!

[@pjnocom0]

Awesome video, I subscribed because of this. I'm trying to mod keyboards as a new hobby. I've learned something new today! Thank you!

[@conunamano]

Amazing transformation !

[@nickthaskater]

Wish you'd have gone with lubing and filming the stock switches to keep the cost down and "work with that you got." Good video.

[@Keybored]

I actually did do that as the middle step... unfortunately, the audio didn't record for some reason so I ended up having to scrap that portion :( The work with what you got actually works pretty well

[@nickthaskater]

@@Keybored sorry to hear about that :( Video was solid regardless.

[@ericchdjdjnx]

I got a different model called EYooso Z88, it was 21 dollars on amazon. For that price I had no problem with the switches or sound of the board. But after trying to use it, it felt off, and I found out it's 62.5Hz polling rate.. Which is really bad. Idk if the K620 is the same in this regard, but I am skeptical since it's the same maker and similar or less price. You can upgrade pretty much everything on the Z88 and it'll still be very bad for gaming. So I think it's a waste of time and money swapping the switches or trying to improve it much. It's alright for 20 bucks or less but just save up for something better in the meantime.

[@tilghman123]

Wow dude, I did not expect it to sound that good! Amazing! Great content bro

[@Keybored]

:) Thank you Ben!

[@martskeebstudio]

I think this would look even more stealthy with blank or side-labeled keycaps. Loved the modded sound!

[@IronCan88]

Scott is G.O.A.T. of keybored modding hands down. If he were a ghost whisperer, I am sure he will make them ghost thocky even while they float above the ground :) Good job as always!

[@Keybored]

Thank you so much IronCan88! I really appreciate the comments and support! I just hope that the video shows that pretty much all keyboards are capable of being modded :)

[@travistran6868]

This is the exact reason why I love this hobby so much, turning trash into treasure with some creativity and modding 😭

[@trongnguyenduy4154]

But everything you did was throwing money into the keyboard. It's $15 in the beginning but after all these mods, buy switches, keycaps. I'm pretty sure it's not that cheap after all

[@travistran6868]

Well it’s all relative. Of course adding budget switches, keycaps, and extra mods like foam and o-rings would increase the cost but it’s still relatively cheaper versus something like a pre-built from Razer or Corsair. (And I would argue that it wouldn’t feel or sound as good)

[@travistran6868]

While you are investing more money into a keyboard and adding more cost than the keyboard itself, it’s just really fascinating how some simple modding can make a $15 keyboard feel and sound way better than a $15 keyboard should.

[@trailfork7815]

​@@trongnguyenduy4154 the switches are like 10 dollars a set, after everything he did its more or less around 50 dollars, it sound like a high end keyboard for 50 dollars, compared to mainstream like razer, it doesnt even get close

[@trongnguyenduy4154]

@@trailfork7815 sure but the fact that all the extra stuffs cost more than the stock keyboard it's self really annoyed me

[@BrendanMcGinley]

Just got this model to do exactly this, so thanks for sharing your far-superior knowledge. Going to mimic what you do here.

[@Keybored]

:) I hope the video is helpful! Good luck with the build!

[@ricedbroccoli]

Howd it turn out?

[@halicusdiaarcan102]

Whoa, this video is awesome! I've been looking into making a custom mechanical keyboard at a low price (it's more fun and wallet-saving when you work within constraints ;) ) and I had spent hours trying to grapple with the 50-ish price tag on other budget keyboards until I found this! I might try it out :D

[@Keybored]

Glad it was helpful! Good luck!

[@Omikronik]

video idea: cheapest mechanical keyboard with the most expensive mods. It would be interesting to see a GMK set that costs 9x the boards price on it xD

[@Keybored]

Haha I thought of putting a GMK set on this but it just seemed so out of place due to the price difference lol

[@notusingthis600]

Proof that you can make generic cherry style plate mounted stabs sound good if modded correctly. And good thing the keeb is compatible with Akko switches, they are amazing for the price.

[@Keybored]

They really are!

[@Lenevor]

which Akko switch?

[@ricedbroccoli]

@@Lenevor Doesn't matter lol. All of their switches are the same price except for their jelly series which are like 2 bucks more on average. I recommend getting them on Amazon and not off their website because after shipping it will be more off their site.

[@kucinglaut453]

First time modding keyboard here. Following what you did but using akko cream yellow. The result is amazing! Thanks for the video!

[@mr.guillotine3766]

I'm enjoying your vids on these much cheaper boards. There are a lot of us who can't afford the other "budget" boards that get suggested ($100+ is not my idea of "budget" but that's because I'm poor, but $15-$40? Yep, that's more my "budget" lol). I might have to try a few things on my own cheap board and see if I can get it to sound better. (Tezarre TK61 with Optical Blacks). Great videos, and I'm glad Hipyo suggested I find your vids and sub.

[@zandkeyboards]

Despite the price, it sounds awesome. Great job man! Sleeper enthusiast build

[@Keybored]

Thank you zandkeyboards!

[@ItsNotFrey]

imo a different profile keycap wouldve sounded nicer, but damn this sounds better than some high-ends I've heard lmfao

[@Keybored]

:) I could have thrown some SA on there and probably would have been more thocky :)

[@diostaylow]

@@Keybored agree! why not try the 20$ GSA profile keycaps on the keyboard hehe

[@Pablo.Minecraft.2007]

I've seen a couple of time this cheap keyboards otemu hotswap pcb's and i've never heard them sound good, great job

[@Keybored]

Thank you! I appreciate it!

[@DrDingsGaster]

This is absolutely nutso! Never expected a hyper budget keeb to sound this good ever.

[@Chris_P_Bacon]

Dang, did not expect this much value out of just 15$

[@Keybored]

I didn't think that anyone could actually make money by selling a keyboard with all these features for $15 with free shipping haha... I feel like the shipping cost is half of that!

[@TitaniumTronic]

@@Keybored perks of cheap labour! Lmao jk but also kinda true...

[@vigvaryb]

Today: the keyboard community finaly realizes that literally everything in this hobby is INSULTINGLY overpriced

[@CodeXCDM]

If only that meant it'd bring prices as a whole down substantially. I see these vids of folks posting "budget" builds at 300$ and i go... @_@ whaaaaaat.

[@Keybored]

:) I feel that as the hobby grows and more and more players jump it, the prices will also go down. It's so surprising now that you can actually find GMK keycap sets available without jumping on a GB for 2 years

[@salmantorik6091]

@@CodeXCDM true, idk what they meant by "budget" while they cost more lmao

[@CodeXCDM]

@METhOdhowtoKilLnoObS agreed. I have a cheap Redragon K556, and a few basic changes improved it a ton. Foam/Tape and switch film removed the ping. Lube made it smoother. PBT caps were nice to add. Caps aside, lube and film are like, 15$. Foam can readily be found in packing, and blue tape is readily available. There are cheap 10$ PBT caps on Amazon, but they're minor and not needed unless you hate the glossy look of stock ABS.

[@nihalprakash8883]

@METhOdhowtoKilLnoObS the jump from a plastic keyboard to an aluminum case is what actually makes the price different worth it, imo. there is just something different and premium about a metal case, both the weight and the sound it produces. no matter how many mods you make to a plastic board, it still just sounds like plastic. and it's great that metal boards like the akko mod series, gmmk pro and keychron q1 are being released that make it more affordable to get close enough to that premium feeling for under 200 bucks. but paying 500 bucks for a custom polycarb case is just nonsense.

[@zyidas4116]

That sounds so good! Great job!

[@Keybored]

Thank you so much Zyidas!

[@lil_syba]

You made this thing sound incredible dude, GGs

[@Keybored]

Thank you so much Jared! I appreciate it!

[@Dark._]

Ah yes

[@Keybored]

You're first!

[@XBlockAcah]

I also just finished upgraded my cheap $17 ajazz tkl keyboard with akko cs ocean blue and pbt keycaps. Foam inside the case and between the pcb, also tape mode & stabilizer mode. It made whole world different, no more stupid rattle space bar and weird gamery keyboard sound.

[@Keybored]

:) Glad it worked out well! $17 is a great deal also haha!

[@elgeneee]

You nailed it again and again! Damn!

[@Keybored]

Thanks Elgene! I really appreciate it!

[@soypolso]

huge change! amazing video, new sub :3

[@Keybored]

Thank you so much for the sub! I appreciate it!

[@trashgarb]

Great vid as always!

[@Keybored]

Thank you so much Jay! Hope it was entertaining

[@MARS-eb8pt]

This video is the definition of If you put enough love into your keyboard, it’ll most likely sound amazing. The fact he took a 15$ keyboard, new switches and a few mods and boom. It sounds amazing. I bet you could also make it look amazing with other mods like painting the case, new key caps and stuff like damn. I just bought my first keyboard to mod And I already feel like buying this one when the other one hasn’t even arrived 😂 I’m about to drop more money on a hobby I haven’t even started yet

[@Keybored]

:) welcome to the hobby! It's a crazy rabbit hole, but it's also really fun... Also has a lot of interesting people in it as well haha. But you are very correct! Any and every keyboard, regardless of the price point does definitely benefit from some modding or another... because everyone has a preference, and you can always tailor the tool to meet that!

[@GeekGadgetIndo]

Oh my godness, its sound nice after you mod it!

[@Keybored]

:) Thank you! It turned out very nice, especially for a $15 board!

[@ShapdCrusadr]

For $12.59 I recently bought 60% Mechanical Keyboard that is hot swappable and it came with PBT pudding keycaps with Outemu red switches. After I got the keyboard I did a lube job on the switches and mod the stabilizers on the keyboard. That's all I did to the keyboard and oh boy did it help it sounds awesome now.

[@f.m.f962]

I got a very similar keeb but this one had a detachable usb-c cable, 2 layers of foam (poron and pe), and a steel mounting plate. It's a Zhiyoulang K87 TKL which has a few configurations, but I got the cheapest one.

[@NortelGeek]

I got the same one. Won't take Kailh switches as the legs are too wide, so I slapped some Outemu snap spring switches into it and put on a set of Quisan mac-like caps (Cherry profile) and it works pretty well. Not as well as my modded Alps board, but better than most MX boards I've done. For a base, even though it's not hot-swappable, I'd recommend the Velocifire TKL02. It's about $28 but is a lot heavier, less cheap feeling and has a nice, thick metal mounting plate.

[@Keybored]

Thank you for the suggestion! Will have to see what the velocifire unit is all about

[@MrMangoJuice]

Unbelievable job, the king of keyboard upgrades

[@Keybored]

Thank you so much! I really appreciate it :)

[@popRC]

you make amazing videos thank you

[@Keybored]

Thank you so much! I appreciate the support!

[@alanhalarcon]

Awesome, sounds like a new keyboard, sounds waaay expensive. Great Job!!!

[@Keybored]

:) Thank you so much!

[@davidclarkenumber1]

wow difference is night and day, you really are a keyboard modding genius.

[@Keybored]

Thank you so much! It was just too much time being spent on it haha

[@muddystick]

Wpuld love to hear it with a PE foam mount.

[@zakutenakazumiya1516]

Been watching this more times than I should be. Though I'm not sensible enough in the hobby to do most of these mods yet, I have to ask. Since majority of these cheap boards use a North Face configuration, would you bring a topic on which keycap profiles work with this? Also, what profile are those PBT keycaps?

[@somecallmevic]

This might be superficial but I subscribed during that typing session. If that's in every video then I'll be watching them all 👍🏿

[@Keybored]

:) Hey, the sound of the keyboard is very important! Thank you very much for the sub and support!

[@halicusdiaarcan102]

No judgement!

[@ucduypham4592]

great content my man

[@Keybored]

Thank you so much! I appreciate the support!

[@Mayden_America]

Really great modding. I was honestly shocked by the end. I wish I was this good at modding already good keyboards lol

[@Keybored]

Thank you! It just took a lot of time haha

[@shinylitwick5066]

I did the same build but with the white case around two weeks ago and I was also surprised at how well it turned out for the price

[@Keybored]

:) It's quite surprising actually!

[@JuanRivera-os6qs]

You did it!! You turned it into a nice sounding keyboard.

[@Keybored]

Thank you Juan!

[@EliteParadox]

BRO THAT side rgb... it's actually really cool

[@Keybored]

I agree!

[@sparebook9642]

Hey Keybored, nice video, it sounded really good! I found your channel from someone's keyboard description mentioning about Keybored's O-ring mod :) If you have a Tecware Phantom 87 TKL in the future, please make a video on how to mod to make it sound better :)

[@Keybored]

Thank you so much! Glad you found the channel through my TOFU video :) If I get my hands on one of those, will do!

[@sigmaziz0]

Great video man!

[@Keybored]

Thank you so much NAIK!

[@sigmaziz0]

@@Keybored You helped me find a decent keyboard which is good!

[@spooky2089]

Let me just apriciate that he got all of the switches out from outemu hot-swap socet. I had one keyborad with those and MAN THEY ARE HARD TO SWAP

[@Keybored]

:) Had to use 3 different pullers for different rows

[@Fukashigi-en3vn]

I did the same but for a friend with this same keyboard. Very hard to work with but sounds good in the end.

[@Keybored]

:) Glad it worked out!

[@matthewlittle8286]

I have a version of this in white, swapped the Outemu's of Radiant Reds by Akko (lubed) and lubed the stock stabs, as well as adding case foam, and converting it to Detachable USB-C, and it's currently one of my favorite boards and the space bar does THOCC.

[@kilerkennedi]

How you converted it to usb c ?

[@Keybored]

That's a great mod! I was thinking of converting the connection to USB C but got too lazy!

[@matthewlittle8286]

@@Keybored it really just makes it more convenient when every other board you own is usb-c

[@frootlyrie]

The most classic black keyboard and modde love the vid

[@Keybored]

:) Thank you so much!

[@kenonoffee]

A while back, I found a hotswap TKL which i bought for around $14 to $15 (they call it the Gigaware K550). It looks fairly similar to the e yooso.

[@Keybored]

I bet it's the same OEM!

[@-weedle]

Keybored is a genius name, amazing video keep it up!

[@Keybored]

:) Thank you so much weedle! I appreciate the support!

[@999samus7]

This guy makes miracles with keyboards!

[@Keybored]

:) Thank you 999 samus! I really appreciate the support!

[@raphyboii]

This sounds REALLY good!

[@Keybored]

Thank you so much Raphael. And to think it comes from a $15 keyboard!

[@freqenc]

NO WAY. Thanks for the tip!

[@Keybored]

You're welcome!

[@cryorigstechlifestyle1989]

I am 99.8% sure this is a rebranded Redragon K552, pretty fun to think about it

[@synder_4262]

Holy shit, I have not the same keyboar but it uses almost the same board, thanks for this!! I was looking for something do do with it!!!

[@Keybored]

:) Glad to be of help!

[@synder_4262]

@@Keybored Thanks to you! And your knowledge on this, you transformed the gift of my wife into something totally different, even her can notice the difference now.

[@santlattuf]

You are really just a keyboard god. You are the best keyboard modder hands down

[@Keybored]

Thabk you so much! I really appreciate it! I feel most keyboards really transform with a bit of tlc

[@amizan8653]

I straight to can't believe this is the sound of a $15 keyboard + akko switches and + pbt keycaps

[@Keybored]

I don't even know how they make money selling this keyboard at $15... I seriously could not find anything that was that cheap anywhere... that's like a low end membrane keyboard price

[@pinkcrosses]

Just scooped this for 15$ too, excited to see what I can do with it haha

[@Keybored]

:) Good luck! It has good potential!

[@SnowWisp]

I was pretty surprised that this channel had such quality with only 31k snowwisp approved.

[@Keybored]

Thank you SnowWisp!

[@officialtechified]

the dry pen ink is killing me

[@L0stDark]

Purchased a bunch of parts for my first mech build last week (GMMK Pro, FR4 plate, Aqua Kings, ect.)... and this vid is giving me buyers remorse lol.

[@Keybored]

:) I'm sure the GMMK pro will turn out great!

[@joeymcjoeysalot6596]

I would have liked to see a detachable cable usb c cable added as well. Sounds great for that price of a board.

[@Keybored]

I think that could be another project!

[@ImCastorTroy45]

I bought this same keyboard and added akko switches, zip n fit foam and orings and it sounds amazing.

[@Keybored]

:) the crazy amount of potential for keyboards of all levels!

[@ImCastorTroy45]

@@ray5121 The radiant reds.

[@ImCastorTroy45]

@@Keybored The only other thing I'd like to do is a usbc female port mod.

[@Keybored]

@@ImCastorTroy45 you know, I really thought about that haha. It's definitely possible!

[@ImCastorTroy45]

@@ray5121 I've only tried those so far.

[@treks3809]

This sounds better then my Halo True Drop ENTR

[@jackdot2609]

Hey Keybored! That's a good video. I want to ask if you can replace the plate foam on the pcb for the pe foam ?

[@menuhin]

$15 keyboard?! Then I heard the pre and post mod sound tests - I cannot help myself but to upvote 👍

[@Keybored]

:) Thank you! I appreciate the support!

[@cxt2210]

this sounds better than many other cheap keyboards

[@Keybored]

I was surprised that they could sell this thing for so cheap!

[@wonderp3574]

sounds incredible

[@Keybored]

Thank you so much!

[@MARTINREN1231]

i got my TKL hotswap mechanical keyboards for $25 too. Its waterproof ,RGB,has USB C connection and pretty much completely programmable with red Khail switches. the down side is that its highly uncomfortable when typing without wrist rest since its pretty thick lmao Oh, the $40 version of this has a bluetooth option too.(Rakk lam ang from the PH)

[@Keybored]

Oooh. BT would be great!

[@michaellooks8397]

That Outemo-only compatability is such a frustrating roadblock with this, haha. Regardless, really cool mod!

[@Keybored]

:) But since the Akko switches work, it wasn't as bad :)

[@jdm_pixel]

I may have to build this exact board

[@Keybored]

Give it a go!

[@St4rl1ne]

Great build! will the Durock Stabilizers fit to this keyboard ? will it be better then the stock ones ?

[@Enaiz7]

I just got mine yesterday and im very happy i got the outemu blues its nice and tactile and the extra switches saved me because my lets ctrl switch broke on me yesterday.

[@Keybored]

Sorry to hear that. Hope you can mod the board a bit and get it to its best potential!

[@MrBlitzpunk]

This is what i did for my custom keyboard. Get a prebuilt universal hotswap keyboard for 40$. Throw/sell away everything beside the motherboard and plate. And buy new caps, case, switches, and cable. And voila i got myself a custom keyboard for less than 150$ and it's darn comfortable and cool looking too

[@Keybored]

Glad it worked out!

[@mariescheidt2639]

I have the same board! I foam modded, clipped stabs and frankenswitched with outemu blues housing and boba U4T stems. Also painted the top plate and swapped in some cheap rama clones from Amazon.

[@octavia7466]

How come you used Outemu Blue housings?

[@Keybored]

I think this is the jailhouse mod? I haven't done it myself but I think there is something special that comes out of it

[@mariescheidt2639]

@@Keybored so my keeb came with blues, and I replaced the stems in the blues with Gazzew's Boba U4T stems.

[@mariescheidt2639]

@@octavia7466 I kept the outemu housings to retain the hotswap capability

[@mariescheidt2639]

@@Keybored look into frankenswitching for better explanation or you can message me. 🙂

[@muhammadmukthi6598]

Thank q man....i just recently buy this keyboard to start a journey mekanikal keyboard stuff 🤣..this vid help a lot if i gonna mod it.

[@Keybored]

Glad it's helpful!

[@user-vp7pi9ln2m]

Hey! You should look at LTC Nimbleback, i think

[@fitchyyboi]

The funniest part about this video is that even stock this board sounds better than razer

[@Keybored]

:) It's not a bad keyboard

[@koniglp6473]

I bought myself a E-yooso keyboard 60% on Aliexpress for 30$. I upgraded it and it is perfect.

[@24REXMAN]

Theres also a very cheap 60%, Redgragon K606, for around $25, is outemu hotswap and some basic rgb!

[@Keybored]

:) Thank you for letting me know!