I Used a $20 Harbor Freight Paint Gun on The

[@BodeVision]

In this video I accidentally referred to the hardener as reducer and if it got confusing I will clear it up for you here. The primer is meant to be used with 2% HARDENER. My second time spraying the primer I still did use 2% hardener as well as using additional REDUCER to thin out the primer for my smaller spray tip. Sorry for the confusion and thanks for watching.

[@Slowbird1989]

Your videos are the few were I will watch a repair and sanding B roll. DOPE

[@812moto]

its awesome to see you doing it up right. As a former body apprentice, you are teaching me some things I never thought about

[@Dmanpeterson]

Kyle finally gonna get his page cainted!!!!

[@jrgregg75]

Paint Mullet's carbon doors for Cleetus, get you over that 100k

[@davejames2015]

I'd try to wrap em

[@adamreynolds1851]

28 years in collision and restoration, glad to see a tuber ,taking the time to do thing well the ls honda is killer by the way

[@BassManBobBassCovers]

With that thorough of blocking, it makes sense why your bodywork comes out so straight!

[@korzer]

You killed it dude, really enjoyed this video, all the explanation step by step, the attention to detail and effort you put into getting the best finish possible is very impressive I'm sure Kyle is going to be a very happy customer.

[@ramairgt2]

I have several of those paint guns hanging up in my garage shop. I learned to paint on those growing up since we painted our own tow trucks. Nice work!

[@shjmo]

Just realized this is the same harbor freight I used to go to when I lived in FL. Paint job came out amazing though

[@gbilya2]

I’m so glad you didn’t clickbait me into watching you work on any other car but Kyle’s.

[@Sparkyz480]

Of all the pro and shadetree painters ive learned from on youtube bro you make it make sense.

[@workingmansrestorations7071]

Looks good. You definitely do better than the 24 hour rustolium paint job I did. Up in New York we run winter vehicles and I obtained a truck with 4 different color pannels on it and just painted it rustolium Grey and it was 1 color and shiny. I was happy with it.

[@tunanocrustsporty420]

This is a true body guy makes every paint job show quality that's what up! I'd have him paint anything of mine for sure!

[@badgermetal]

Really like how you explain the whole process so well. You have inspired me to fix my stuff a little more proper. I fixed 2 curbed wheels using bondo, paint matched cans and Spray Max 2k clear. The wheels turned out really clean, then the damn tire shop used clip-on wheel weights on alloy wheels. 😤

[@kr2513]

TCP global has all the sizes up to 1.8 2.0 and I have the 2.5. wonderful quality guns.

[@connorortega3252]

Watching these videos is giving me more confidence for when I try to paint my celica this year! Thanks for being so detailed

[@Ttvavvej]

I bought me a paint gun for 20$ aswell, and I painted my first car last weekend, had no idea what I did, but it looks good! Just watched some videos on youtube, "how to paint a car". Fun to see the hatch finally get the job done on it, keep it up man!✌🏻

[@lewhanna6112]

Man, I haven't used feather fill in 35 years. You did the right thing not using an expensive gun, hard to get one clean after using that product.

[@danssv8]

I only own a high pressure pot sprayer and a half a dozen gravity gun's and that's all I use for everything that needs priming and final coats

[@TheLastHonk]

I am here because of the boostedboiz, but you actually have great production for a one man operation, and I enjoy the videos even the ones not about Kyle's hatch.

[@TreBuilt]

just saying best music selection on youtube.

[@idigdaytona4478]

Rather than paint sticks on the window rubber , I would use some cord or string . It holds it up enough to get paint under the edge and when you are done you just pull the string and the rubber lays right back down .

[@JTBlair-nw6gb]

Man I'm excited to see the outcome. You're doing an excellent job!

[@jrgregg75]

Great work Kinda funny seeing all that work going into making this body straight and perfect. After seeing it for so many years. Going to be great.

[@bazilwreckerloughead]

I find it so cool that even though you got a $20 gun, you still used an in-line filter + a pressure regulator, giving it a fighting chance, nice work man! On another subject; is there a way I can subscribe more than once!?

[@freedomfox8183]

You have two or you end up with junk results.. bad prep bad end result a lot of times when you use cheaper things you got to do every single thing you can to give it its best chance at success

[@SuperMinimadness]

Exactly right if you did not use a filter and pressure regulator you can allow water or oil to go through the spraygun and mix with the paint vapour and it then lands on the panel and is trapped below the paint where it can cause all sorts of reactions like micro blisters crazing peeling and even de laminating or corrosion as primer is mostly hydroscopic which means it absorbs water you must use an in line filter

[@theyzoomers]

Ya you can subscribe to his only fans for the low low price of 69 $ a month

[@kbar150]

Ol hobo freight actually had some pretty decent guns especially if your just learning or don't need a sata/DeVil/ etc

[@PhamVans]

Love your bodywork sir, you definitely got some skills there. Can tell that EK is about to get back to it's legendary status. 👌

[@MrPatrik246]

Great job, that air powered block sander is very cool tool

[@timothychidalek4285]

Came to this channel just to watch you work on the hatch, and I'm really liking it! They way you film, and your personality is great!

[@BodeVision]

Thanks for much for checking them out

[@1ANTONIO6]

I've been using feather fill for many years with a 3.5 tip. Gets it on there quick and awesome build you can get them panels straight as can be with it! Always enjoy your videos man you do a great job!

[@kseries20-24only]

That's Bode, he makes it happen! (with or without Harbor freight gear) 😎

[@jajabinksGG]

I’ve used that same gun to paint my hatch and s13 and it did just fine . Way better then rattle can

[@RAWRMotorsports]

100k comin quick

[@Dieselman6.7]

Im not gonna lie I got mad when u said that deleted diesel sounds like crap in the beginning because I own one 😂 but I still watch all ur videos! Keep it up!

[@BodeVision]

Lol don’t get me wrong, I support all aspects of automotive culture. It was just garbage how loud it was when I was filming lol

[@BodeVision]

Lol don’t get me wrong, I support all aspects of automotive culture. It was just garbage how loud it was when I was filming lol

[@Acestrex]

I love the TL!! I’m more of a 07 tsx guy but that era Acura’s are soo sweet!!!

[@jonkeau5155]

Hey, cool thing about those weird horizontal shadow bars in the footage from the paint booth: LED lights flash on and off at a certain Hertz per second, usually a multiple of 30, your eye can’t see it but it’s just fractions of a frame per second faster than any multiples of the frames per second of the camera (29.97 instead of 30), because of this you see lines and they move kinda like a helicopter rotor at a slightly different speed than the frame rate of a camera! Incandescent and florescent lights don’t flicker because they use a material to give off light that has an on/off response time slower than the flicker rate of the power source so it smooths it out.

[@mrbojanglz3775]

your videos are improving exponentially since i first watched you paint the first car for Kyle. Keep it up

[@SaltineWalter]

Just commenting to help the algorithm! Keep killin!

[@BodeVision]

Much appreciated!

[@stevardm2694]

Come on people give Bode some love

[@fast97z24]

I'm here fer the long haul. You do amazing work and prove every day that it doesn't take a million dollar body shop operation to get show quality finishes. Great job, sir.

[@darnjoel1]

Damn Adam I am really excited for you man... First milestone on your way to a mili..military... Congrats 👏

[@TheMaster7891]

The TL looking clean

[@nathanwilliam1922]

Pull the strainer outta the lid. It work’s awesome

[@SethHollingshead]

Also the evercoat finish sand high build isn't as thick. Feather fill us like the slick sand. Finish Sand mixes 4:1 and I always throw 10% reducer. I highly recommend you try it. Iv used it with a 1.8 tip.

[@hoost3056]

It ain't the cost of the gun but the painter that wields it.

[@rizza7575]

You're editing skill's are getting much better! You're killin it keep pushing bud.

[@japhethfaucett9923]

Came here for the hatch but I’ll stay for the knowledge

[@jasonhall6799]

great work! thank you for sharing the process!

[@grahamford9646]

Rope around the screen mould works

[@vR3zXiiZ]

Bode man you're taking the hatch on another level god damn brother she getting that spit shine treatment good work love to see the vids

[@MrChrisdavie]

Good job, I’m looking forward to seeing it progress.

[@danielostman5805]

Great work! I can tell you know what you are doing. Keep it up!🙂💪

[@chrisabernathy1082]

Alright Boostedboiz Family let's get BodeVision over that 100k mark! Show this guy some love. ❤🚗

[@codyhenault4597]

Hell yeah. B/V Back with other one. That killer content.

[@Alan.Garcia01]

I always preferred gravity fed guns, that way I get to use every last drop of product as much possible.

[@Yakmins]

you're doing the right thing! prep is always key, good luck on the 100K!!!

[@victorwilks88]

100k here we come 🙌

[@Bumblebee4788]

I always used Siphon guns to paint my cars, never a problem.....even car customizers used them back in the day.... You need to go to lowriders school in California to learn how its done.....

[@DarkEclipse223]

I've been waiting for this episode

[@Nico_335i_DCT]

Very nice progress Adam. Only 2500 subscribers to go! Have a great weekend. Dutch regards, Nico.

[@v4yt126]

Great work you deserve way more than 100k subs

[@Stephen-cg3xo]

Loving the longer videos keep up the great work

[@neilbollmann201]

Big fan try to stay away from polyester primer go with 2 part urethane filler primer my experience with the polyester it cracks it’s basically fiberglass resin with pigment.

[@chinky1269]

Looking good, keep it up looking forward to the next video.

[@SethHollingshead]

What up. Hey I love evercoat. Use rage gold. I haven't used featherfill but finish sand is on point.

[@sebastienstgermain6573]

Nice work I could see all the effort you put il to the fillming and editing timelaps love your vidéos

[@JohnWD40TC02]

Looking good Adam, it's surprising how much prep work you have to do on a car then have nothing to show for it at the end as it's all about getting the panels straight but you are making good progress. I'm not a lover of those syphon spray guns for the reason you mentioned, I'm sure they have their place but that's not on my gun rack😂👍John UK.

[@Bobmarleytronjr]

Yo I like how u edit your videos. Very smooth

[@BodeVision]

I appreciate that very much! I try

[@Bobmarleytronjr]

you can for sure tell you put in a lot of effort with all your crafts!

[@Calvinhayes37]

I use the gravity feed all the time no issues yet throw away guns

[@BodeVision]

This one was returned the same day lol.

[@1TX0UTLAW]

Can't wait until the 1!

[@derekwilliams9775]

TL is dope, needs black housing headlights or Type S ones

[@kzarnold3678]

Nicely done

[@xoxoxd914]

love your work Québec, Canada ❤

[@Ek9luis]

Great work I can’t wait to paint my hatch

[@victorwilks88]

Always killing it More youtubers should contact you 😊

[@Ricky-nq7lu]

Shit mate, After this paint job Karl not going to want to rip the old civic so hard. Can't wait to see the finished outcome.

[@kei9716]

Damn I know what Harbor Freight you went to. I go to that one all the time

[@BodeVision]

Yeah man that’s the one closest to me

[@christrahan6526]

Following now sorry love the channel u are helping me with my car body work I’m learning a lot from your channel

[@independentsoldier4274]

Love the work you are doing, great step by steps, really makes me wanna repaint my EF

[@zweaters]

First video I’ve seen of yours and I knew that was a TL in the first 10 seconds just by the seats haha. I’ll be sticking around for a while to say the least.

[@trev0or341]

cant wait till it's done fr

[@jomi1413]

Can you go over your sanding process what grit you used or just generally talk about it. I have an EK civic planning on sanding it myself. 💪🔥

[@donedwards3811]

Super job,& very informative

[@stevemuller82muller65]

Keep up the good work bro 😎🤙

[@-.0__0.-]

Great video straight to the action 🔥

[@kylespivey5405]

Love how you drop the news ur doing the inside in the last minute 😂

[@BodeVision]

Yes! Thats for the ones watching the video from start to finish

[@ThomasBilt]

You should try the purple harbor freight paint gun. Its wayyyy better

[@EmeryParker-ld9kc]

So I went to jail in the middle of this video now I'm out and waiting on my ride finishing it 😅

[@freedomfox8183]

Thanks for ribbing my truck fam lol😂

[@shanethompson7543]

Another awesome Video

[@brettross7683]

your intros are legendary🤣🤣

[@2jimmycrackcorn]

My local Sherwin store is great, shame the silvers never have good coverage for the line i use and they dont call it Shrinkage Williams for nothin'! lol

[@yellowrice1453]

I wish you were in my state to get work done by you on the cars I have that need body work and paint

[@YourGoddamRight]

First time saying this but I wish they were longer.

[@buckbuchanan4810]

"ARIANA GRANDE GOES SO HARD BOOOOIIIIIIIIII!!!!!!" That killed me! haha

[@DrivvaasGarage]

That tl is cleannn

[@edgardovigo147]

Good job men 💪

[@Rudenutts]

Wow! I didn’t know you’re a bass head!😜👍🏼

[@joshuajohnson9647]

Subscribed brother. Love your videos 🤙🏼