Thanks again, just a flick of a switch 👍 I was going to turn axles around but knew I had installed them correctly 👍 should you wish to drive a real lorry, I can do a good deal for you at my hgv driving school. I may be able to demonstrate from an above angle the reverse exercise to our customers once I purchase a trailer to add to for my Tamiya truck
@ianyams3 жыл бұрын
You're welcome, glad I could help. Where are you based?
@paulspencer23313 жыл бұрын
We are based in Liverpool L9. We offer Hgvtraining in both categories of lorry
@ianyams3 жыл бұрын
I'm only over in Wallasey.
@paulspencer23313 жыл бұрын
Thanks for your video on the setup. Any idea on my issue, when I steer to the right the wheels actually turn left? Hope you can help
@ianyams3 жыл бұрын
Thanks. Reverse the steering servo on the transmitter.
@paulspencer23313 жыл бұрын
@@ianyams Thank you Ianyams {I have put the servo upside down now and it works correctly now} Thank you so much.
@ianyams3 жыл бұрын
No problem, glad I could help 👍
@carlowles985210 ай бұрын
Hi I have 2 of these transmitter and receiver I no the button/ switches at top of transmitter are channels 5 and 6 on receiver but which is which I can't find this info anywhere Thanks
@ianyams10 ай бұрын
Hi, plug some servos into every port on your receiver and flick each switch to see what switch controls each servo.
@gourav9253 жыл бұрын
Please tell me which transmiter should be installed for RCExtra vator, how can the left right and 5 Hydrolic control the extracvator back and forth with 2 Joy stick only
@ianyams3 жыл бұрын
Hi, you need a transmitter and receiver that has 10 channels for an excavator.
@gourav9253 жыл бұрын
@@ianyams yes
@gourav9253 жыл бұрын
Best and cheep price transmitter
@paulspencer23313 жыл бұрын
I have another issue. I am sure I put axles on correctly (rear axle diff to the right) (middle axle diff to left). However when I push the left lever on control forwards my truck Reverses and vica versa . Any ideas ? Could I simply swap the green and yellow wire into motor ? Or could this damage it 🥴
@ianyams3 жыл бұрын
Again reverse the servo switch on the back of the transmitter that corresponds to the throttle stick.
@paulspencer23313 жыл бұрын
@@ianyams do you mean on the Carson control unit, to turn that lever ?
@ianyams3 жыл бұрын
Yes it's a little slide switch on the back, they reverse the servo corresponding to the sticks.
@philjanko17 ай бұрын
𝟞𝟘𝟘𝕥𝕙 𝕤𝕦𝕓!
@ianyams7 ай бұрын
Thanks Phil 😊
@nikko75072 жыл бұрын
Mate I have a Carson Reflex Stick 3.1 - I also have a five channel Carson Reflex Pro 3 Reciever . However it doesn’t seem to be linking up , ESC is green and reciever flashing red . Even when I press the set buttons nothing changes colour! And these are new ? Is because it’s a 5 channel reciever as my other Carson was a 4 ????
@ianyams2 жыл бұрын
Hi, are you trying to hook it up to a MFC?
@nikko75072 жыл бұрын
It’s sorted now mate thanks . I binded it , so I can use the one control on both Carson recievers , I have to cars with Carson recievers hornet & nova fox
@ianyams2 жыл бұрын
Nice one. I was going to say make sure they are binded. 👍
@GyuHobbyRC3 жыл бұрын
The video is so cool. friend Become a thriving channel. Let's get along 친하게 지내요. 😉👍😉👍😉
@ianyams3 жыл бұрын
Thank you 👍
@gourav9253 жыл бұрын
@@ianyams Please tell me which transmiter should be installed for RCExtra vator, how can the left right and 5 Hydrolic control the extracvator back and forth with 2 Joy stick only
@paulspencer23313 жыл бұрын
We are Learn Our Way hgv training (Based in Liverpool L9 7AT)
@ianyams3 жыл бұрын
Oh right, I'm based in Wallasey.
@littlenemo142 жыл бұрын
Hi mate. I wonder if you could tell me why, occasionally my Actros Mercedes’ just runs off and I don’t seem to be able to stop it. Any ideas please. I guess I’m not too far from where you are btw.
@ianyams2 жыл бұрын
Hi Steve, I've never heard of the MFC unit's malfunction on the throttle before. Does it run off without any throttle input when standing still?
@littlenemo142 жыл бұрын
@@ianyams Hi. Thanks for the quick reply. No it only seems to do it occasionally. I’ll persevere just in case it’s me as I’m a real beginner with RC trucks. Whether or not I panic when it’s moving I don’t know, god I’m pathetic lol. I enjoyed your video about the Carson. It taught me a lot. Thanks again.
@ianyams2 жыл бұрын
Thanks. Ok mate, you're welcome. Enjoy.
@iPROxTOILETROLLZz3 жыл бұрын
Hi could you demonstrate how are you use the fifth wheel on this controller with the Hydraulic legs
@ianyams3 жыл бұрын
Hi, sorry I don't have the truck anymore. It didn't have the remote 5th wheel on it, just the manual.
@iPROxTOILETROLLZz3 жыл бұрын
Okay thank you anyway good video keep it up
@ianyams3 жыл бұрын
@@iPROxTOILETROLLZz you’re welcome. Thanks very much 👍
@ianking62513 жыл бұрын
Hi David did you ever manager to get to work out the fifth wheel on this controller as I am struggling with that to?
@ianyams3 жыл бұрын
David and Ian, I think I have sussed it, bottom left trim fully left and throttle stick click to the left once, the hazard warning should flash once, then your right stick up and down controls the 5th wheel servo . To exit the mode click the left Stick once to the left and the hazard warning light will flash once, return left bottom trim to the centre.
@petervango71718 ай бұрын
As a newby. instructions all great and understood , one problem remains ,truck will not shut down remotely...
@ianyams8 ай бұрын
Brilliant glad I could help. I haven't got the remote any more but there is a way to shut the truck down remotely, check out Terri Wilde KZbin channel she's an expert on the MFC control's on various transmitter's.
@petervango71718 ай бұрын
Many thanks,will do tomorrow. Ive also joined an RC truck club. May be able to help as well. P.V
@ianyams8 ай бұрын
Great, are you in the U.K.?
@ianyams8 ай бұрын
Controls are pretty much the same on the MFC 01 & 03 kzbin.info/www/bejne/j6rFeWaIbLZnd9ksi=3t6YWMqQScA21Da3
@ianyams8 ай бұрын
Shutdown procedure also in this video, in German but you can see what he is doing. kzbin.info/www/bejne/a6GmhZyBd76UoZosi=GjO6tsInfXxzPFR3
@gourav9253 жыл бұрын
Pleas replay me
@ianyams3 жыл бұрын
Flysky fs-i6s
@gourav9253 жыл бұрын
@@ianyams how to control 4 hydrolic and forword and backword right left only 2 joystick
@gourav9253 жыл бұрын
@@ianyams Would you be friends with me
@ianyams3 жыл бұрын
Forward and backward is controlled by the shoulder rocker dial's on the transmitter. The joysticks Only control the boom, stick and bucket.