IBANEZ​ GIO​ | wrap​ping from red to chameleon and rainbow chrome / customizing​ BASS guitar​

Ibanez Gio
#basscover
#bass
#flea
#allaboutthatbass
#restoration
#bassguitar
#Ibanez
​#basslover
#You​cantdothisdavie504
#Wrap
#Ibanez​Gio​Soundgear
​#Davie504
#Davie504fan
#noticemeDavie504
#Dotskie1stvlog
Amazing​ bass​ Cover
Even @Davie504 Cant do​ it.​
Slap like​ now.. SUBSCRIBE​ and​ leave a​ comment..
#pinoyinthailand #wheninbangkok #thailand #wheninthailand #pinoy #filipino #proudtobepinoy #thailand #tour #travel #journey #wanderandwonder

[@theburkett67]

The wrap looks awesome, but you got the string the wrong way around the tuner. You want to keep the string pull as straight as you can for tuning stability.

[@foadrightnow5725]

Great results! Personally though, I think it would look better without the silvery material as a pickguard. But still, a great transformation!

[@loosedeadmoose1566]

this is great

[@oldfriend327]

Absolutely excellent. Thank you for this. Great attention to detail and inlays are so much better than the stock dots too.

[@iamdotskieofficial]

Thank you sir.. I appreciate it🙏

[@AlbertoLaiho]

Came to watch a bass that looks pretty. Left to watch Kenshin. Gorgeous work! And thanks for the music. :)

[@xyz8655]

Fantastic

[@jarexxsuvexx8212]

👍🏾Wow, looks amazing with that silvery pickguard thingie. Awsome job.

[@MichaelThomasOflaherty]

Looks truely fantastic I love it

[@iamdotskieofficial]

Thanks so much!

[@thomasvernier8506]

Well done!

[@AlanKaruzo]

Now, it is great stage bass!

[@ikiiki1144]

Yap... but for '70 or '80...

[@Hydros92]

looks really cool and you showed incredible skill with your craft knife. The one issue I have is that you didn't pull the pots when wrapping the body, so now if someone has to pull the pots, either to upgrade them or just replace a bad pot, it's going to ruin the wrap as you went over the washers, would have been better to remove all the electronics before wrapping the body. It also looks like you might have done the same with the audio jack as I can see it's still in the back cavity, though I can't get a clear look at it on the outside. To be fair, this is a nitpick in an otherwise really nice customisation.

[@lilith251]

Thanks for sharing

[@Xcxiiix]

Nice job, its super nice! Hahahaha you got my like and sub for one of my favorite kenshin songs

[@brownmilktv]

wow... sooo good, ganyan pala yan. thank u for showing us bro. keep it up. see u around

[@starbituineppmixvlog4219]

hello bhe dalawin m rin bhay k mag iwan ka lng ng bakas pra alm k puntahn bhay m

[@brownmilktv]

@@starbituineppmixvlog4219 opo coming

[@byronmitchell2067]

Looks good man

[@gjm1971]

Excellent work!!!

[@iamdotskieofficial]

Thank you sir

[@phantomtoast5747]

Nice colour, I like the Ducati badge on the headstock too haha

[@pedrovitor5125]

Ficou muito bom. Parabéns

[@babybangs2007]

Rurouni kenshin soundtrack to match an awesome video. Great work 🤘🏼🤘🏼🤘🏼

[@gabriel_carvalho98]

I was waiting for the headstock being wrapped to match

[@wanderkitsen8150]

Sending u my hugs! Stay connected xoxo

[@doctoribanez]

Will be interesting to see how the back of the neck holds up

[@nobody-iv6mq]

love this❤️❤️❤️❤️❤️❤️❤️❤️

[@starbituineppmixvlog4219]

hi

[@jsonslim]

Perfect! I want to wrap my guitar with orange luminiscent.

[@iamdotskieofficial]

Sounds great!

[@WibblyWobblyBob]

Wow, you have some serious skills my friend.

[@iamdotskieofficial]

Thank you my friend I appreciate it

[@_patrikjay_]

Amazing work brotha, really cool idea!

[@iamdotskieofficial]

Thank you! Cheers!

[@mheriesoledad4649]

Bongga naman neto. 😵😍

[@djolemadzarevic]

How easy it looks when someone else does it. I tried once... pretty painful experience, I must confess :)

[@patsplat]

Very cool

[@iamdotskieofficial]

Thank you very much

[@luckyvr39163]

Nice job

[@iamdotskieofficial]

Thank you sir

[@itsmerosey3400]

Nice content keep going sending my full support here hope to see you in my house staycon

[@charmlyrics1908]

New friend here🤗 Sending my full support Stay connected! Keep safe

[@iamdotskieofficial]

Salamat lodi pasugod na din ako sa bahay mo para sa resbak stay connected❤️

[@crish63]

Galing naman😍 keep uploading lods

[@iamdotskieofficial]

Salamat po maam na maganda.. Reresbakan ko po ikaw ng matinde.. 💖

[@SJFord]

You did the right thing

[@kellerakc]

I was looking for some tips in order to customize my guitar, cuz its just impossible to have something out there to sell that perfect fits to me. But you sir come really close to what i wish for. Some masterpiece job you have done. Congrats!

[@iamdotskieofficial]

Rock on!

[@iamdotskieofficial]

Thank you very much.. i appreciate your kind words sir.. ❤

[@derrickharmon7980]

That's an impressive turn around

[@iamdotskieofficial]

Thank you very much sir

[@no_va1643]

Wow😯

[@iamdotskieofficial]

thank you very big..

[@starbituineppmixvlog4219]

hi limetlist dalawin m bhay k mag iwan ka lng ng bakas pra alm k puntahn bhay m

[@mitchtrinidad]

full support stay connected & see u around☺

[@maejhunshainecenon2471]

Hello watching here in jeddah,, new friend mo, sorry late,,,,,, #busy

[@badgercheck]

I really wanted to watch this but man that music is like a punch in the ear

[@ar-archannel9819]

Full support here.. Stay connected...❤

[@starbituineppmixvlog4219]

hi come into my house and I will pay you back just put a sign to know me how to go to ur house

[@PushSueAside]

I’m guessing your a brain surgeon, with scalpel precision like that, you could save lives! Beautiful work. Cheers

[@iamdotskieofficial]

I wish!

[@mkrgamingtv341]

Astig👌👌👌

[@charlienagy2385]

Beautiful job. I guess we have to spray clear coat (lacquer) on it to make it last longer, right ?

[@KeithCopeland778]

This is AWESOME!!!!!! A great display of art and skilled craftsmanship and a very cool soundtrack!!! The neck and fretboard look INSANE!!!!!!! The neck looks like carbon fiber!!! Did you also use the same process for bass pickups? What a transformation!!! Very impressive!

[@iamdotskieofficial]

Thank you very much!

[@sandicharm2652]

Woooww. New subscriber here stay conn

[@starbituineppmixvlog4219]

hi dalaw ka s bhay k mag iwan ka lng ng bakas pra alm k puntahn bhay m

[@itsmejeanvargas1399]

Hello new friend here! Stay connected po

[@davinvlogofficial3552]

Hello lods. Andito na po ako at hatid ko ay supporta. Manatiling magkayakap at sumuporta sa iba. Godbless us all

[@pandabd1610]

Any chance I can get some wrap scraps from you to do this too!! 🔥🔥

[@psvlogs2558]

New friend here lodi. Ganda naman nyan.

[@iamdotskieofficial]

thank you lodi.. keep safe and stay connected 💖

[@PrincessDianne]

Hi im here na..thank you..stay connectedd

[@iamdotskieofficial]

thank you din po lodi beauty.. stay safe lagi lagi

[@starbituineppmixvlog4219]

hi princess dalawin m kubo k mag iwan ka lng ng bakas pra alm k puntahn bhay m

[@melrose5963]

New subscriber 🙂

[@iamdotskieofficial]

Salamat po.. Keep vlogging po and keep safe..

[@amongkalibvlogs5839]

Wow ganda lupit mu kapatid

[@iamdotskieofficial]

Salamat lodi boss.. 😇

[@charlenesvlog2106]

#371 hi friend dito na po ako sending support po..wow Galing naman

[@iamdotskieofficial]

Salamat po lodi.. Reresbakan ko po kayo sa iyong bahay.. Resbak is real 💖

[@swancrunch]

and how durable is that on a fretboard and back of the neck? or it's just a display piece?

[@pinyin1536]

Galing mo naman good for business

[@iamdotskieofficial]

salamat po maam.. sana nga po magkaroon ako ng shop paguwi ng pilipinas.. ingat po kayo where ever you are stay safe po.

[@MichAKADora]

here na po ako lods

[@likejoenarockph5006]

Stay connecting.. Im hre to support u

[@starbituineppmixvlog4219]

hi

[@likejoenarockph5006]

@@starbituineppmixvlog4219 tara?😂

[@vinsoycanets9882]

Support natin isat isa.

[@iamdotskieofficial]

Yes po sir done already.. Stay safe po lagi lagi

[@news24ndtvindia6]

What material is it? The purple one? The sheet. It looks amazing.

[@MFCon555]

Ganda naman stay connected bro

[@iamdotskieofficial]

thank you boss lodi.. stay safe.. i already visit you and leave a mark.. and I will visit again.. lets help each other grow..

[@sanderbrugman8157]

really easy way to do the silver sky finish from prs

[@ma.shasnylorraineaurora775]

Nice po🤗 stay con.

[@iamdotskieofficial]

thank you maam na maganda.. stay safe stay connected po💖

[@lacrimau4u]

From what seller or where to get that multi-couloured sticker sheet who is aplied to that bass-body?

[@giasombrio1164]

Stay connected ❤️

[@iamdotskieofficial]

Thank your ma'am na maganda at suportib pa hart hart 💖

[@bosssaymahulodipetmalu6713]

❤️

[@starbituineppmixvlog4219]

hi

[@starbituineppmixvlog4219]

hi boss saymahu dalawin m bhay k mag iwan ka lng ng bakas pra alm k puntahn bhay m

[@greentroll9326]

i wish i had the bottle to take my guitar apert but its over 40 yrs old and something would probably break lol

[@joannyronquillo1251]

Galing po

[@iamdotskieofficial]

Salamat lodi stay connected suportang tunay toits.. Reresbakan kita sa bahay mo..

[@ThePonsyanos]

Wow nice...ito na po sukli...

[@leonardonarciso3552]

Where did you buy this wrapper?

[@MiraContent1]

Sending you hug back..

[@iamdotskieofficial]

thank you po maam💖

[@emphatic001]

Steady hand with the blade.

[@tyrazkytv2447]

sending my full support to you idol. sana connected tayo

[@iamdotskieofficial]

Yes boss idol im visiting your house im on my way.. 🔥👌👌👌

[@starbituineppmixvlog4219]

hi dalaw ka s bhay k po mag iwan ka lng ng bakas pra alm k puntahn bhay m

[@the.eye.in.silence]

Nice work! What did you put on the fretboard before adding the wrap between frets?

[@iamdotskieofficial]

I put 3M N94 primer on the fret board sir, its like a glue

[@the.eye.in.silence]

@@iamdotskieofficial thank you

[@nelfevillagantol5641]

Im here na😊 more subscribel lodi

[@iamdotskieofficial]

Salamat lodi pasugod na din ako sa bahay mo para sa resbak stay connected❤️

[@7007matthew]

That thing looks fantastic! Nicely done. Where did you get the materials?

[@iamdotskieofficial]

im working at a wrapping shop i took some of the excess materials from the vehicle that i wrapped with that stickers

[@iamdotskieofficial]

thank you sire

[@gavendelrio9193]

Cool as hell looking wonder if it holds up

[@iamdotskieofficial]

Its been 3 years since i wrap it and it still holding . No problem because the wrapping materials that i used are premium vynils from avery and hexis

[@gavendelrio9193]

awesome!!

[@12Jsilva]

pls send me the link for that wrap. would work really great on my rgd7ucs prestige

[@junyboypogi8328]

Galing nito boss! Balak ko sana i wrap yung luma kong Ibanez. Ano po mgandang brand pang wrap na hindi masyado hassle sa bubbles? Thanks!

[@user-io5vo6mp2x]

Bonjour, je voudrais savoir comment vous réalisez la jointure entre la face avant et la face arrière après la pose du skin wrap ? Merci. cordialement

[@ILabsofficial]

Hi po andito na po ako sa bahay nyo! Salamat! Stay connected!

[@starbituineppmixvlog4219]

hello Mai dalaw ka s bhay k mag iwan ka lng ng bakas pra alm k puntahn bhay m

[@lemon6531]

Bass designs are so much cooler than guitar designs

[@iamdotskieofficial]

Yes sir Jericho agree 100%

[@davidblount9782]

You forgot to wrap your bridge saddles and machine heads! But seriously, well done.

[@iamdotskieofficial]

Thank you sir

[@rican-so5ze]

Done lodi

[@countzero1972]

you started with a strip on the sides first? I am confused. The vid begins with what I thought was an already completed back because you see the sides wrapped up to the top edge. Then when you do the top and flip it over to expose the back, it is still red. What is up? Did you skip a step? Nice work though. I want to know if you overt lapped vinyl where the edges meet? Thanks :)

[@iamdotskieofficial]

Good day sir.. Yes I did put a strip first on the side because if I did it with just two piece (front and back only) it will come out or bloom specially on the curve and round part.. I forgot to put the video part when I'm making the strip..

[@MrBeen992]

Looks cool. But I dont know if I would spend so much time nad effort in such a cheap bass. I have the Gio GSR200 version

[@JessaCimatu]

Love it, nag iwan nako bakas Lodi, pasuklian nalan po salamat

[@baronfury4821]

Amazing work, i wanna try this too, but i don't know what is this wrapping material called☹️

[@iamdotskieofficial]

You can try it sir, the sticker that i use on my bass is 3M sticker its a purple blue with rainbow chrome

[@ronxie8498]

New subscriber here! nasuklian napo kita stay connected po 💖

[@starbituineppmixvlog4219]

hi dalaw ka s bhay k po mag iwan ka lng ng bakas pra alm k puntahn bhay m

[@cbowick1000]

What did you use?

[@Mrturtlestomps]

Is there a way to hide the seams , also I wanna get a white one and spotter it with paint speckles , can you clear coat over the wraps or do they sell clear wraps to go over a lower layer?

[@iamdotskieofficial]

There is a clear wrap called ppf, about the seams any guitar wrapping can't avoid to have seams because its impossible to make it one piece.. I make the edge first and then front and back

[@amongkalibvlogs5839]

Dtu na aq lodz para suportahan ka

[@iamdotskieofficial]

Stay connected boss lodi.. Lets support each other grow 👌💯❤️

[@TheRealDealBobbySteele]

Sticker guitar?

[@Kakascrot]

I've been thinking of wrapping a guitar just for fun, but I'd also like it to be usable, I never thought of wrapping the fretboard, how did it hold up?

[@iamdotskieofficial]

Its been 3years since i wrapped it and im still using it and no problem on the fretboard sir

[@rmatt498]

Quick question, I’m buying an unfinished guitar body for a build I want to do, will I need to put a finish on it before putting on the vinyl wrap? Or would it be fine to put the vinyl right on the unfinished wood?

[@iamdotskieofficial]

good day sir.. you can put it on the vinyl on the unfinished wood just make sure that it is smooth so that i will look clean when its finished.. if you want to put a finish first make sure that its not a weak paint or top coat otherwise it will be a mess we you pull back the Vinyl the finish or top coat will come with it..

[@shane2609]

This is inspiring me to do the same kind of thing with vinyl on the fretboard, but I have to know does it affect the sound in a negative way?

[@iamdotskieofficial]

No sir it does not affect anything.. just be carefull when assembling it again..

[@starbituineppmixvlog4219]

sana alng nanddito mka dalaw s bhay k,mag iwan lng kayo ng bakas pra alm k puntahn mga bhay nyo

[@guitaranswerguy]

I was wondering how the heck I could wrap an entire guitar... because most of the videos I've found people only cover the face of the guitar. I wasn't sure what to do on the areas where the 2 pieces of vinyl would overlap, but I see now that it's not that noticable.

[@iamdotskieofficial]

Im planning to change it again with teal colour, but as of today my bass wrap still looks fine.. thank you sir for noticing my video

[@tmb1065]

2 questions: 1: how do you avoid seams showing; and 2) aren't you risking scoring the original paint using the knife directly on the body?

[@iamdotskieofficial]

1: i make a good overlap, it does have seams but a good over lap doesnt make it look bad.. 2: i make sure that make cut on the sticker is very light so that i wont cut the original paint of my bass.. Thank you sir

[@jeremy7383]

@@iamdotskieofficial Did you wrap the edge of the body first? looks like that wasn't in the video?

[@iamdotskieofficial]

Yes sir i did

[@judgedreddhd]

I don't see how the neck wrap is going to keep up with excessive playing