Ice cream stick house | How to build house | Funtime | Reka Bentuk & Teknology | standard 4 homework

#neeshenghappykids #icecreamstickhouse #howtomakehouse #rbt #standard4
4 年及 - 设计与技术
Reka Bentuk dan Teknologi Standard 4
用冰淇淋棒盖房子
Make use of ice cream stick to build house
How to make colourful ice cream stick house - mini house
如何制作五颜六色的冰淇淋棒屋 - 迷你屋
It is easy to make. I make this togather with my girl for her standard 4 RBT homework.
Ingredients:-
Colourful ice cream sticks
Glue
Scissor
Pencil
Ruler
Dry flower or artificial flowers for decoration (optional)
这很容易制作。 我和我的女孩一起为她的标准 4 RBT 作业做这个。
原料：-
五颜六色的冰淇淋棒
胶水
剪刀
铅笔
统治者
装饰用干花或人造花（可选）
Building a popsicle house is a fun and simple way to pass the time. You could build your masterpiece a million different ways, but we've looked into it and have found that the very best one is to start by building four squares with sticks glued to them for the walls. Once that's done, you can build your roof by creating two triangles with sticks glued to them, just like slats. Then comes the best part - decorate to your heart's content!
1. Gather your supplies. You will need around 100 Popsicle sticks. You can buy craft sticks at a hobby store or Mr DIY store craft section. You will also need glue. A hot glue gun works best, but children should have adult supervision. Also have paper, scissors, and a utility knife.
If you don’t want to use hot glue, a regular bottle of craft glue will work. Always practice caution when using a hot glue gun as it can burn you.
2. Lay some newspaper or brown paper down. Since you will be working with glue, it’s best to cover whatever surface you are working on with newspaper, a disposable tablecloth, or something that will protect the surface.
Hot glue can be hard to remove from surfaces so take extra precaution. Hot glue will also spill out of the gun sometimes, so always set it over the covered surface.
3. Make four squares with Popsicle sticks. Lay down two Popsicle sticks parallel to each other, the same distance apart as the length of one stick. Lay two more sticks on top of the first two forming a square. Glue these at the corners. Repeat this to build three more squares.
If you are using a glue gun, plug it in and turn it on. Let it heat up. Then squeeze the trigger to release the glue onto the sticks.[2]
These squares will become the walls of the house.
4. Glue Popsicle sticks covering the wall frame. With the square laying flat, glue enough sticks in a line to cover the entire square. Place a line of glue on two of the opposite sides of the square and lay the sticks in place. Repeat this to complete all four walls.
Be sure that you place the sticks tight together so that there are no gaps in the wall.
You may not have room for an entire stick when you get to the the end, so use the utility knife to trim a stick down to fit in the final spot.
5. Craft the roof.
Build the initial frame. Take three Popsicle sticks and form a triangle, overlapping the sticks at the corners. It doesn’t matter which of the sticks lays on top of which. Use a small drop of glue to connect the sticks at all three corners. Repeat the same process to make another triangle.[3]
This basic roof uses just two triangles as the trusses, but you can make a more stable roof by making a third triangle, which would go between the two main ones in the roof.
6. Lay Popsicle sticks to create one side of the roof. Place a dot of glue on the flat side of each end of a Popsicle stick. Attach the stick to both triangles so that it runs perpendicular. Repeat this process until you have covered the length of the triangles’ sides with sticks. Place the sticks tight together. Hold each stick in place for at least 5 seconds so the glue will hold.
Be gentle as you lay each stick so that you don’t pull any of the previous ones apart from the triangles.
7. Cover the open ends of the roof. You now have a roof frame that is open on either end. As an optional addition you can close off the interior of the roof completely. Starting from the bottom of the roof, glue a stick across the frame. As you add each additional stick, you will need to cut it slightly shorter as the triangle narrows toward its apex.
Closing the roof off completely will add realism to your Popsicle stick house as this is how real houses are constructed.
9. Assemble the house
Design windows. If you want to enhance the house, you can cut one or two windows into the walls.
To make further adornments to the house, you could use the pieces you just cut from the window to create shutters on the sides or a frame around the window. Do the same for the door.
10. Glue the walls together at the corners. Take two of the walls and stand them so that the sticks are vertical. Squeeze a line of glue along the inside edge of the stick on the end of each wall. Gently press the glued edges together and hold for about 30 seconds.[5]
Attach the remaining two walls one at a time to complete the basic structure of the house.
11. Install the roof on top.
12. Decorate the house with fence, flowers, table or chair.