Iceriver KS0 Ultra Kaspa ASIC SETUP, TESTING, OPTIMIZATION! (You need to watch this first!)

Iceriver KS0 Ultra Kaspa ASIC ARRIVAL! SETUP! TESTING! Be careful these things are picky! Today I received a KS0 Ultra for testing from Crypto Miner Bros! Thank you to CMB for supplying me with this Iceriver KS0 Ultra Kaspa Mining Mini Beast for testing! Every time I receive a new Kaspa ASIC from Iceriver it's a new adventure. What worked on the last batch, might not work on the new hardware. Be sure to watch all the way through for tips on how to optimize your KS0 Ultra!!
▶️ If you're looking for Crypto Mining Hardware check out Crypto Miner Bros! Use discount code GREATER for $70 off your order! www.cryptominerbros.com/?wpam...
▶️ ICERIVER 2.5% OFF DISCOUNT CODE!! = GREATER www.iceriver.io/?refer=GreaterGoodMining
Looking to purchase an AMAZING Kaspa mining BEAST?! Use my exclusive discount code and save 2.5% off your Iceriver order!!
These links are Amazon affiliate links. I get a small commission if you use them at no extra cost to you and it helps support the channel! Thank you for watching!
- 240 watt Power Supply is a must for aggressive overclocks!!
amzn.to/3xdREy6
- 140mm USB Fan with low, medium, high settings
amzn.to/3L5vTnN
- DUAL AC Infinity AXIAL S1238D, 120mm Muffin Fans with Speed Controller.
amzn.to/4cFcmXN
Single AC Infinity AXIAL S1238, 120mm Muffin Fan with Speed Controller. This is an option if you don't plan to aggressively overclock. You could mount this fan to the shroud kit or the top!
amzn.to/4czsiee
ARCTIC TP-3 Thermal pads:
amzn.to/3TRE4YG
Thermal Glue: amzn.to/3PR2HDT
ARCTIC MX-6 Thermal Paste: amzn.to/3PSsAmW
Copper Heatsinks: amzn.to/3vHPPJh
THE COPPER HEATSINKS I USED IN MY "HOTROD YOUR KSO PRO" VIDEO HAVE BEEN SOLD OUT FOR A WHILE!! THE LINK ABOVE IS AN ALTERNATIVE THAT SHOULD WORK JUST FINE! I WILL BE TESTING THESE IN THE NEAR FUTURE. These come with tape, which I have been told works but I still prefer a more permanent solution like the thermal glue I have listed above
Follow me on Twitter! / gr8ergoodmining
Check out my Discord! / discord
DISCOUNT CODES & AFFILIATE LINKS:
- ICERIVER 2.5% OFF DISCOUNT CODE!! = GREATER www.iceriver.io/?refer=GreaterGoodMining
Looking to purchase an AMAZING Kaspa mining BEAST?! Use my exclusive discount code and save 2.5% off your Iceriver order!!
- TANGEM WALLET 10% off DISCOUNT CODE!! = GREATERGOOD
I use Tangem wallet to safely store my Cryptocurrency like Bitcoin and Kaspa!!
tangem.com/en/?promocode=GREA...
- If you're looking for Crypto Mining Hardware check out Crypto Miner Bros!
www.cryptominerbros.com/?wpam...
If you're specifically looking to purchase a Bitmain KS5 here is my affiliate link
- METER BOX 10% OFF DISCOUNT CODE!! = GREATER
I monitor power consumption on all my mining equipment with Meter Box power meters!
www.themeterbox.com/r?id=3cfbtn
- FRUITION DESIGNS 15% OFF DISCOUNT CODE!! = GREATERGOOD
Silence your ASIC miner and save on electricity with a Fruition Designs kit!
fruitiondesignsllc.com/
- I bought the new PDU that you might have seen in some of my videos from Altair! They also sell mining equipment, control boards, cables and have hosting services! Check them out here altairtech.io/aff/23/
- If you're looking for mining equipment, hosting, cool merch and much more check out my friends at Coastal Crypto!! Use Discount Code Greatergood for 2% off!! www.coastalcryptomining.com/?...
- I currently have GPU's & ASIC's hosted at terrahosting.io/ Great group of people running Terra Hosting! Check them out!
- Keystone Cryptocurrency Hardware Wallet affiliate link: keyst.one/?rfsn=7685725.a224f...
- I love using @coderofstuff_ Kaspa ASIC calculator! I use this calculator frequently to speculate on possible Kaspa ASIC ROI projections! Here's the link to the calculator if you want to try it out! kas-breakeven-calc.vercel.app/
Nothing I say is EVER financial advice or electrical advice. This is for entertainment only!
Kaspa reward reduction timer: www.kas.live/timer
Kaspa emission reduction schedule: kaspa.org/wp-content/uploads/...

[@GreaterGoodMining]

Have you had trouble keeping your KS0 Ultra stable unless the temp is just right?

[@RainBitcoins]

Dang right... Unless it's at 80-86c it won't hash proper.. And Im way too uncomfortable letting stay that hot, especially when I'm not home. So I run the fans to keep it at around 70c, so then it hashes mostly at 380c,sometimes 400. Also pbfarmer said there likely won't be any OC as Iceriver has locked their code, at least for now he doesn't see an OC in sight... Also fans on the back for mine don't start spinning until it reach 85c. Also I like using the Asus Rog 330w power supply. I get them for 45 bucks on Aliex, only thing is you will need to solder a new barrel plug on the end as it comes with an improperly sized one.

[@BnR_Tech]

I keep mine above 400 hash rate in a hot room and fan set at 35% lol

[@GreaterGoodMining]

@RainBitcoins yeah mine hashes even higher if I let it get into the 80's but it just feels unsafe to me to let the heatsink get that hot

[@GreaterGoodMining]

@BnR_Tech nice! Yeah I'll probably put these in the garage since it likes to run hot anyway

[@simmo6035]

Great video mate. My KSO Ultra has been running for 48hrs now. My temps are 47 and 37. Dropped to 45 and 36 when I had window open. It's sitting in my home office on a cold polished concrete floor. I turned the floor heating off. Air temp is 20. 30min hash is 435, 3hr is 398 and 24hr is 394. It spikes to high 460s. Not sure what all the 'keep them hot' chat is about. Fans are at 100%, I'm letting it do it's thing. 100% on solar power too.

[@davidvantwout]

Looking forward to getting my first miner in the july batch! Your vids have been super helpful. Subbed and liked!

[@GreaterGoodMining]

Nice! I'm glad they've helped! If you want to join my Discord we have a great community of Kaspa ASIC fans and we all try to help eachother out :]

[@davidvantwout]

@@GreaterGoodMiningkeen! Checked under your description for the link but it has expired :)

[@timiamcrypto2202]

Your videos are great. I have an Ultra ordered in the July batch.

[@GreaterGoodMining]

Thanks I appreciate that! So far I'm loving the Ultra, just wish it wasn't so picky about the temperature it wants to be in!

[@TheSouthernMale]

I love the beginning of the video, the only question is how comfortable was the sofa that night. LOL

[@GreaterGoodMining]

Lmao! She's a good sport thank God!

[@RedPandaMining]

CRYPTOMINERBROS FTW!

[@GreaterGoodMining]

Good peeps at Crypto Miners Bros for sure!

[@TheSouthernMale]

I just got some good news, I order 2 of the Ultra and just checked on the shipping, should have both on Monday :)

[@GreaterGoodMining]

Nice, that's exciting! Get those Kaspa Mining Mini Beats running fast!

[@Stantheman-jv5kv]

@TheSouthernMale did you order from July batch or June?

[@MikeC-pr6kb]

Great video bro! I’d like to say that I had a very bad experience with CMB. I paid 38k$ for a KS5 because I missed the original Bitmain sale, and they did not send my machine for an entire month. Kept giving me excuses when I contacted them. Then when I finally got the machine it had scratches on the bottom from being used. Also it was not factory sealed. It was taped up with some Bitmain printed tape. So in other words they were hashing 250$/day in $KAS(at the time) with my machine. It was wrong on so many levels. As you know I am a miner community advocate, and my goal is to stop the shady business practices by miner manufacturers by telling the public my stories. I do not get paid, and I use my own funds to buy from random vendors to see how they treat our mining community. I encourage everyone to share their stories, good or bad. It’s important that we as a community help change the way we are treated by these Chinese manufacturers and resellers. Thank you for the amazing video, you made me laugh. It was a pleasure meeting you, and re-meeting you at both events. 😎

[@GreaterGoodMining]

Oh that's a bummer, I've heard nothing but good things about CMB so far. I think the manufacturers are the ones who were "testing" these miners. Unfortunately there has been a few times where these were shipping out past the shipping window, especially if people ordered later after the batch was announced

[@D4RR3N_]

That's exactly the same as I'm running my ultra. Usb fan brings hash down..set internal fan to 50% is sweet spot for me too

[@GreaterGoodMining]

Yeah I tried a lot of different settings. Even let the fans auto adjust. But 40 to 50% is where these things seem happiest. They just like to run hot 🔥

[@Hugh_Franklin]

Happy wife Happy life. My neighbors were in Miami on vacation. I should've gone with them. Don't burn the house down.

[@GreaterGoodMining]

HaHa that's true, she's a good sport lol

[@dumpsterfire6732]

Outstanding video!

[@GreaterGoodMining]

Thanks dumpsterfire!! This was a fun one to make!

[@NizmoMiner]

Good stuff. I was leaving at 20 percent But i noticed if gets to hot stock fans auto to 100 percent. Yeah it’s real pain . Hope the make a solid fix. Or I’m gonna do immersion on it to maintain warmth.

[@GreaterGoodMining]

Yeah the Ultra seems really touchy. Like it want's the perfect temperature

[@iaf01]

great video. It took some work to get the temperature right. (here at an average of 65°c). You could make the fans automatic!! a hug from Brazil.

[@GreaterGoodMining]

I tried leaving it on auto but it seemed like it got too hot that way. It went up to 88 degrees :-0 maybe ill try it again and see how it goes! Thanks for watching 👀

[@gfx2006]

​@@GreaterGoodMining How do you get the fan to auto mode?

[@GreaterGoodMining]

@@gfx2006 they should default to auto mode. I like setting mine manually for the Ultra because it seems like the fan doesn't kick in until it hits about 85 degrees in auto

[@kcxfiles16]

Great Video. Got 2 coming. I was going to use 230 PSU with them for any future OC. I did not get the stock PSU with them.

[@GreaterGoodMining]

Nice! Good call on the PSU. There are better options out there for just a little bit more money than Iceriver charges

[@kcxfiles16]

Ps. Have you noticed how the Nicehash rates are cranking up on current OC KSO pros mining BTC? Been seeing 350 to 450GH lately. More than advertised in 24 HR normal hashing. If BTC doubles here. It’s more than 2x in gains. Kaspa the gift that keeps on giving!

[@GreaterGoodMining]

@@kcxfiles16 I wonder if it's because KRC20 launch? Lots of extra fees going to miners etc

[@redg8gt]

@@kcxfiles16 why not mine kaspa?

[@KeyesMinerGina]

@@kcxfiles16 we can provide first-hand resources of various blockchain miners like Bitmain, IceRiver,Canaan,Innosilicon, MicroBT, Goldshell, Jasminer,etc. Are there any machines you’re interested in recently?

[@ZiambadZ]

I landed exactly at 70degrees. Even though i get slightly better hash at 75-80, ill take 70 so i dont burn my skin off everytime i touch it for more than 5 seconds. 35% on fan, but the key thing is getting to 70 degrees. At 69 or lower I start losing hashing power. True for both my ultras

[@GreaterGoodMining]

That seems to be the same for me. It does well in the low to mid 70's, but it is definitely hot to the touch at that temp. It's a touchy Kaspa mining mini beast lol

[@caidrosiur5696]

love the intro :D

[@GreaterGoodMining]

HaHa thanks! My wife is a good sport lol

[@caidrosiur5696]

@@GreaterGoodMining

[@KeyesMinerGina]

@@caidrosiur5696 we can provide first-hand resources of various blockchain miners like Bitmain, IceRiver,Canaan,Innosilicon, MicroBT, Goldshell, Jasminer,etc. Are there any machines you’re interested in recently?

[@edmundodejesusaraujojunior1025]

A question for Greater Good Mining! Do you have to use the "ICERIVER + PBFARMER" firmware used in the KS0 Pro to make better configuration on it or is it not useful (not compatible)?

[@GreaterGoodMining]

It's not compatible. Iceriver has made it more difficult to crack the KS0 ultra

[@mlotens1976]

As a PC builder i've got good experience with Noctua fans. Would replacing the stock fans with good quality Noctua fans make any difference?

[@GreaterGoodMining]

No, because the issue isn't cooling the unit down. It actually needs to be allowed to run hotter for optimal hashrate

[@Brookesy400]

Hey GreaterGood, what will I need as far as ether net cords do I need a splitter for Ethernet cables to connect? ect for set up of 2 kso ultras?

[@GreaterGoodMining]

Yes you will need an ethernet cable to connect each KS0 Ultra. You can get network switches pretty cheap now from Amazon etc

[@sadiesometimes1141]

Fantastic, as usual!! 🔥🔥🔥 'Not now, doing crypto stuff'😅 #NeverStop🥂 #MaybeMoreCats

[@GreaterGoodMining]

HaHa thanks SadieSometimes! Lol the funny thing is I moved the cat out of the way for this video. I should probably just let him rome around freely while shooting videos! Lol

[@sadiesometimes1141]

@@GreaterGoodMining All the subjective studies that I've done say more cats😅💯

[@AndreLuis-sr2eu]

Tnx for the video. My information doesnt appears in the browser, it says "machine offline". But I can see it minning on the kaspa pool. Do u know what could happened?

[@GreaterGoodMining]

Check to see if your IP Address for the device changed

[@OzSkyking152]

I wonder if the other KSO's would get more hash at those high temp's.

[@GreaterGoodMining]

It seems like each model has a sweet spot. Ks0 Ultra seemed to like chip temps in the 60 degree range. Ks0 Ultra seems to like 70 degree range

[@jcbsportscards6841]

I bought four... these can only hook up directly to an ethernet modem? I bought remote wifi routers, but no dice unless I plug right into our main router.

[@GreaterGoodMining]

They need to be connected to ethernet. There's no wifi built in

[@jcbsportscards6841]

@@GreaterGoodMining I bought ethernet cables and was plugging them into wifi extenders. They are connected via ethernet cable. Does that mean I have to plug them directly into the router? Ugh, if so.

[@KeyesMinerGina]

@@jcbsportscards6841 we can provide first-hand resources of various blockchain miners like Bitmain, IceRiver,Canaan,Innosilicon, MicroBT, Goldshell, Jasminer,etc. Are there any machines you’re interested in recently?

[@BartsB18C6]

I can't watch the video right now, but I wrote to iceriver for my low hashrate issue. They told me to remove the external fan, that temp 2 must be between 50 and 60°c and to let the machine manage the fans speed. Now the miner is pretty hot but I'm around 410Gh/s

[@GreaterGoodMining]

Yeah I had the same issues. My KS0 Ultra likes exhaust temps in the low 70's. I took the top fan off and set the internal fans to 50% and it is over 400gh now consistently!

[@arthurmilonas7986]

When you put your wallet address on the dashboard When the KSO pro ultra mine does everything go to your wallet or does it go to the mining pool first and then you transferred to your wallet

[@GreaterGoodMining]

The mining pool will deduct their fee from the block rewards and distribute the Kaspa to the participants in the pool based on their contribution (ie hashrate)

[@Steckdosenauto]

My 3D PLA printed stands are now useless. The started to melt down. Hope to usw another filament (PETG) would solve this problem. Otherwise I need an new printer to print ABS/ASA.

[@GreaterGoodMining]

Yeah give been printing everything with ABS so it can take the heat

[@BnR_Tech]

😎👍🏻

[@GreaterGoodMining]

:) Thanks for watching 👀

[@Financial_Failure]

I’m soooo scared to run it hotter just for an extra 20-30GH. BUT!! At scale it adds up.. so maybe I should do it

[@GreaterGoodMining]

Seems like they're holding up to the heat so far! Running strong at over 400gh. I'll ship yours out tomorrow brotha!

[@Financial_Failure]

@@GreaterGoodMining I’ll risk it for the biscuit, this is the only way

[@GreaterGoodMining]

@@Financial_Failure 100%!

[@TutorialTvOnline]

Just setup my ultra today but login or admin website not loading... any tips besides holding down the reset for 20 secs ev time lol

[@GreaterGoodMining]

Make sure you have a static IP address for the miner. Go back to the monitor tool and hit IP report. I bet the IP address for your device changed

[@ProfilaktiskasLT]

Hello, does psu plug is the same as other ks0 units?

[@GreaterGoodMining]

Yes the psu plug is the same

[@Brookesy400]

Hey Greatergood, what did you mean when you said copy IP address and put into browser? TIA

[@GreaterGoodMining]

To log into the web gui for Iceriver you need to get the IP Address of the KS0 Ultra. Once you get the IP Address of the machine you can either cop and paste into the Address bar of ChromeBrowser or you can type in the IP Address manually into chrome browser

[@nmcreative956]

the question is how to set it the fans to auto? if i don't tick the fan speed box the fans run 100%

[@GreaterGoodMining]

@@nmcreative956 they should default to auto after restarting the machine

[@nmcreative956]

@@GreaterGoodMining at what temperature do the fans switch on auto? I was already in the 80s and thr fans didn't switch on.

[@PJPlayhouse]

The intro always gets me-it's fantastic! I want mooore! Keep up the amazing work! 😊

[@GreaterGoodMining]

HaHa thanks PJPLAYHOUSE the arrival videos are the most fun to make lol

[@hendrawaneka623]

After trying hard for hours looking for the right temperature, mine was stable at Temp 1 66 C, Temp 2 51 C with a fan setting of 46% automatic. Stable above 400 Gh/s to 450 Gh/s. A little worried about durability with such high temperatures running continuously. Does anyone think the same?

[@GreaterGoodMining]

Yeah it was a struggle getting mine just right but once I got it set I've consistently gotten over 400gh. These chips are different than previous versions. I honestly don't like how hot the metal gets on it. As far as longevity goes, only time will gell

[@famousworldwide3600]

I started mining three days ago. I put in my wallet, but I've yet to be paid out. How long does it take to get paid out?

[@GreaterGoodMining]

@famousworldwide3600 the pool you are using has a default payout amount. Some of them default to 50 Kaspa. You can change it lower on a lot of pools if you want to be paid out more frequently. Most pools will show how much Kaspa you've mined so far then have a section where you can change the threshold for payour

[@christopherrandle3085]

Yes, the two ultras I bought are in the garage, both are around 380GH. :(

[@GreaterGoodMining]

Yeah they are very picky it seems unfortunately

[@simmo6035]

I know we always want more but they do advertise 400.+/- 10%. (360-440).

[@yukotakaeda4163]

waiting for special anniversary edition

[@GreaterGoodMining]

Yeah I wonder if they'll make a Commemorative edition for these

[@ccc771]

hello! i was wondering what laptop power supply you used on the KS0?

[@GreaterGoodMining]

There's a link to the laptop power supply I use in the description of the video 📹 :]

[@ccc771]

@@GreaterGoodMining thanks ....one last thing when do you get your payouts with this miner? cheers

[@Jarda_B]

LET ME EXPLAIN When you heat up normal metal its conductivity decreeses and resistence increeses and more power is wasted for that higher resistence BUT IN SEMI CONDUCTORS its exactly inverted MORE HEAT = RESISTANCE DECTREESES = CONDUCTIVITY INCREESES ==> THE EASIER ELECTRICITY FLOWS (more current is actually getting to the tranzistors, and its not wasted on the higher resistance) ==> MORE POWER💪

[@GreaterGoodMining]

Ahhh yes, I love to hear the scientific explanation! Thank you, that makes sense... MORE POWER BABY!

[@wowojumbo]

I get problem with ks0 ultra dost setup mining maybe problem firmware I get 2 but dosnt work

[@GreaterGoodMining]

Can you give me more info on what is happening with the machines? I've been told the new firmware has fixed some of the bugs, so if you got through the initial set up try updating the firmware. If that doesn't help try a hard reset on the devices. Also make sure you have a static IP Address set up for each machine through your router

[@commonsense6725]

So you have to use a computer to do all this ? Can it be done on mobile?

[@GreaterGoodMining]

Yes you need a computer to do the initial set up

[@commonsense6725]

@@GreaterGoodMining ok thanks will subscribe

[@GreaterGoodMining]

@@commonsense6725 If you need extra help you could always join my Discord. It's free and we always try to help eachother out

[@event4live942]

*Hi Greater Good Mining!* *I hope you're doing great. I've been a huge fan of your channel and your incredible journey into the crypto mining world. Your knowledge and generosity are truly inspiring. I’m reaching out with a humble request from India. As someone with a deep passion for mining but limited resources, I don't have that much of money. It would mean the world to me if you could send me a KS0 Ultra. This would be a life-changing opportunity for me to kickstart my mining journey. Your kindness and support would make a tremendous difference. Thank you for everything you do for the community. Keep up the amazing work!*

[@Zman0210]

How many of these can you plug to a single socket in the US?

[@GreaterGoodMining]

@Zman0210 it depends. Is there anything else that will run on the breaker that supplies the outlet? How many amps is the breaker rated for on the outlet? Let's say you have a 100% dedicated breaker with a single outlet on it and it's a 15amp breaker. You shouldn't run a continuous load over 80% of what the outlet/breaker is rated for. 15amp x 120 volts =1800 watts 80% of that is 1440 watts. These take a little over 100 watts. So the max would be 13 KS0 Ultras. But please be careful, these things run hot. You should have a very good understanding of heat management and electrical wiring if you are going to get into crypto mining

[@Zman0210]

@@GreaterGoodMiningawesome thanks for the answer. It is basically a dedicated outlet. I’m only going to be running an 8 port switch besides the 5 ultras I have coming in. I’m not sure how many amps my apartment is rated for but do you think 5 should be alright on a single socket?

[@GreaterGoodMining]

@Zman0210 5 should be fine on a single dedicated outlet. That's only about 500 watts

[@GF_Burke]

I can't even run my 120mm. lol. But again, mine sits by my window AC... just happens that's where my tech bench is.

[@GreaterGoodMining]

Yeah I ended up just leaving the fan off completely and running internal fans only. It's crazy how sensitive these are!

[@GF_Burke]

@@GreaterGoodMining Good OC space ;)

[@GreaterGoodMining]

@@GF_Burke I hope we can overclock these things!

[@mortimerlivan557]

How much is it currently earning in USD?

[@GreaterGoodMining]

It depends on a lot of different factors, like the performance of the node hardware you decide to run and your up time etc. For example the Guardian node will share 500,000 tokens among 500 Guardian nodes. If it hypothetically were split evenly then you would earn 1,000 NTMPI per month. But you would also get a 50% boost for 12 months, bringing you up to 1,500 NTMPI per month which is worth about $50 a month at the moment. What I'm most excited about is Timpi's potential going forward. After this node sale they should have more data indexed than the search engine Bing. It's pretty impressive what they are doing in the space.

[@3lputoluchy9]

Mate , Iceriver is very clear that you must position the ks0´s horizontally.

[@GreaterGoodMining]

It's OK, I've had every single Iceriver that's came out. Taken them apart, put them back together. Positioned them every which way. This way is fine, trust me 👍

[@svenssoniot4057]

1/4 of mine is not hashing. It is an older version (version 11), thats quite frustrating.

[@GreaterGoodMining]

That is very frustrating, did you reach out to Iceriver?

[@svenssoniot4057]

@@GreaterGoodMining Yes, waiting for a new Firmware

[@GreaterGoodMining]

@svenssoniot4057 let me know if they send you any beta firmware. I havnt heard of anyone else having this problem. Did you try a new power supply? I've seen a ton of people have the machine boot up and have it show in the web gui but not start hashing. It has happened to me too. I put a new power supply on it and it worked. Might be worth a shot

[@svenssoniot4057]

@@GreaterGoodMining Yes switched PSU with one that is working

[@1986rauda]

Don't cool it down more your hashrate will be lower just leave it stock trust me

[@GreaterGoodMining]

Yeah it definitely acted differently than i expected. I just left it running without any external fans. It's a weird one! Lol

[@1986rauda]

@@GreaterGoodMining look at kaspa new ath .1933

[@SalmanSaleem1985]

why do i keep getting machine is offline

[@GreaterGoodMining]

You might have to set a static IP Address through your router

[@SalmanSaleem1985]

@@GreaterGoodMining will give it a shot

[@Geedeepee]

60C on Temp 1 is optimal anything over that is unnecessary

[@GreaterGoodMining]

Not from my testing. Temps innthe 60's caused my machine to perform poorly

[@Geedeepee]

@@GreaterGoodMining interesting 60-62C on Temp 1 for all my 5 units pushing 405-420 GH

[@GreaterGoodMining]

I've talked to a lot of other people and they are finding the same thing as me. All I can say is, Icerivers can be weird sometimes lol Low to mid 70's and I'm hashing over 400gh. If I get in the mid to low 60's it's game over and my hashrate won't go over 350

[@Geedeepee]

@@GreaterGoodMining yea from everyone I saw they all said go over 70 on temp 1, so I started off with that. but I didn't want to cook my units too much so i did fiddling and now 2 days in a row 60-62C on all 5 units pushing 405-420 GH.

[@vikingzeppelin]

Why didn't you setup K1pool? That is how you get payouts. This tutorial is not complete.

[@GreaterGoodMining]

You do not need to set up k1pool. I have never made a k1pool account and I've been mining this way on k1pool for over a year. You can use whatever pool you'd like

[@vikingzeppelin]

@@GreaterGoodMining ok good, but then how many KAS do you get paid out each time? is it 50? I've been mining over 50 KAS following the same instructions. Still no payout. This is my first time mining at all. I got a KS0 Ultra.

[@vikingzeppelin]

the problem im having is i didnt put th ek1 pool address into iceriver dashboard. the other tutorial made it look like i can put any address into there.

[@GreaterGoodMining]

@vikingzeppelin you need to put your wallet address in when setting up your miner. Otherwise it will mine to Iceriver

[@sotiriosbellos9118]

#BoycotGermanProducts

[@GreaterGoodMining]

What German products?

[@WoodyHertzogIII]

Welp, you completely lost me at 6:32 exactly. I logged in and it said Machine Not Running in a little pop up window. I continued to watch your video - you didn't say one word about if the machine happens to not be running. I have it connected to Etherport, Plugged in, and it is running. It is getting warm. So some feedack for you - pretty frustrating video to be honest.

[@GreaterGoodMining]

You're frustrated because I didn't include all unforeseen problems with crypto mining hardware in a 10 minute long video? You don't know me clearly. I seriously try to answer every question people ask me on KZbin and in my Discord and on Twitter. Try asking me nicely. What exactly is the problem you are having? Pretty frustrating comment from you to be honest