Icom IC-7300 Firmware Upgrade V1.40 (Feb 2021)

  Рет қаралды 20,216

Transmitting Until Robots Replace Us

Transmitting Until Robots Replace Us

Күн бұрын

Пікірлер: 52
@louisianaconservatives2304
@louisianaconservatives2304 3 жыл бұрын
Best Firmware update video I've seen yet. Thanks
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
Glad it was helpful! Thank you for the feedback.
@louisianaconservatives2304
@louisianaconservatives2304 3 жыл бұрын
@@transmittinguntilrobotsrep1045 I really wanted to update the firmware today, but the dx contest is this weekend, so, out of an abundance of caution, gonna wait till Monday....lol. It does look simple enough, but, 1. I'm not a computer person, and 2....that scary warning message that Icom throws at us. Would be nice if they would have something in place that might dummy proof this process. I suppose there is no such thing...lol
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
I’ve done dozens and dozens of firmware updates over the past twenty years, and bricking a piece of hardware is a very real possibility when the power is interrupted, SD card is bad, random buttons are pressed, and the operator is trying to multitask (yep, done that). That being said, you will do fine if you just take your time and let it complete the task. Of course, you are absolutely right to wait until after the contest - no sense in risking a weekend of fun! Good luck.
@louisianaconservatives2304
@louisianaconservatives2304 3 жыл бұрын
@@transmittinguntilrobotsrep1045, well, I took the plunge today and started the process. Went slicker than greased owl snot. The new options are awesome. Thanks again. You gave me the courage to soldier on through the process...lol. Appreciate the video a lot. Take care.
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
I'm really glad that it went so well, and thank you for the "slicker than greased owl snot" imagery - that one is going to stick with me for a while. Have fun! 73, AC3DS
@МартинХороши
@МартинХороши 3 жыл бұрын
Great job explaining on how to install the firmware you make it look so easy, unlike others,thanks
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
Thanks Martin! I'm glad that it helped.
@FishingFan2
@FishingFan2 3 жыл бұрын
Enjoying your videos and the 2 minute ones as well, thank you!
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
Awesome, thank you for the feedback. I'm really glad that they are finding people and seem to be decently received. There are a lot of great big name ham radio content creators out there, so thank you for visiting my little corner. :)
@bjohn819
@bjohn819 3 жыл бұрын
Thank you! First video I've seen showing the use of the new Multi-function knob feature - I was stuck and you got me unstuck. 73 de KB4DE
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
Awesome, glad it helped! Thanks for the feedback. 73 AC3DS
@KX4UL
@KX4UL 3 жыл бұрын
Very nice job Drew and very well explained. The crystal clear audio and video make it a pleasure to watch. I have owned and sold 3 different IC-7300's experimenting with various HF radios. I think I am about to purchase another, because out of all the other rigs I have tried, the IC-7300 seems to be a perfect fit for my needs. How are your kids doing with their new licenses and HT's? Hope all is well...73!
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
Wow, sounds like you do a lot of experimenting. Is there someplace that you share what you've learned as you try and work with different radios? What is your primary use case? All is well here. We've been very busy this summer with a lot of new learning and experimentation. We've summited 5 mountains, backpacked with radios, installed a radio in the car, tested new antennas, and took a CW class. It has been busy! We'll start making videos again very soon to share our experiences and what we've learned. 73- AC3DS
@KX4UL
@KX4UL 3 жыл бұрын
@@transmittinguntilrobotsrep1045 - I wish I would have documented my many experiments...sorry. I retired a few years back and we just moved rom Florida to a newly built home in Tennessee in April 2021. Now it seems I have far less time than when I was working...lol! 73!
@todkapuz
@todkapuz 3 жыл бұрын
making rf power as a non-menu just sold me... the band scope stuff ive always used center so never bothered me
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
I'm glad that the video helped and that there was something in this update that made it worth it for you. I'm still loving the Scroll, but just decided to give the Center a whirl for a while and see if I can enjoy a different way of looking at things. 73s!
@hamandshortwaveradioirelan4773
@hamandshortwaveradioirelan4773 3 жыл бұрын
Great information, thanks for sharing and the clarification about 🍎 download
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
I appreciate the feedback, and I'm glad that the video was helpful! 73 AC3DS
@mr.fantomas7726
@mr.fantomas7726 3 жыл бұрын
Icom IC-7300 with IC-9700 in one case for 2500$ makes sens, nothing else. Dame, Icom make it!!!
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
Agreed - They did it with the 705, so a 100w version (bigger and heavier of course) would be a nice item. I like the all-in-one, but I also wouldn't be opposed to Icom dropping the price of the 9700 to match the 7300 and having them sit side-by-side.
@mr.fantomas7726
@mr.fantomas7726 3 жыл бұрын
@@transmittinguntilrobotsrep1045 Cool, one more guy what thinking like me.
@eminusipi
@eminusipi 3 жыл бұрын
Great presentation!
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
Thank you kindly! Glad it was helpful.
@reidlanham2011
@reidlanham2011 3 жыл бұрын
Thanks for the video! Cool dog, Vizsla?
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
You're very welcome, thanks for the feedback. Yes, she is a Vizsla, and she loves to be a part of recording ham radio videos. Many cameos to come.
@darylcheshire1618
@darylcheshire1618 5 ай бұрын
getting a 7300 tomorrow, does the update include past updates, or do you have to install older updates first? Presumably the new radio will be up to date but I’ll check anyway.
@rtrjmk5
@rtrjmk5 3 жыл бұрын
Thanks nicely presented.
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
I'm glad that it was helpful! I hope you enjoy the new features.
@timothyphillips667
@timothyphillips667 3 жыл бұрын
Great video!
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
Thanks, I hope it was helpful! 73- AC3DS
@pf5x
@pf5x 3 жыл бұрын
The multi knob program feature is nice indeed on first sight. However, press RIT or dTX and press again to switch RIT/dTX off. You'll see the function will NOT revert to its programmed function, but to the default 'kHz' function. So when you use RIT/dTX a lot (most CW ops do) this feature is quite useless in practise.
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
That is definitely disappointing. I'm going to have to give that a full workup. I'm just starting to learn CW so it didn't dawn on me to try those functions in that way. Three steps forward, one step back is still progress I suppose. Thanks for sharing so that others can see this limitation.
@r0naldzuccala198
@r0naldzuccala198 2 жыл бұрын
Question. If someone buys a new 7300 is the firmware upgrade included in a new unit. Thanks. Ron z.
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 2 жыл бұрын
It depends on when it was manufactured. From other folks that I’ve heard from over the past few months, some have had updated firmware, and others have not.
@Spikey1968
@Spikey1968 3 жыл бұрын
great video thank you sir :D
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
My pleasure! Glad it was helpful for you. 73
@DestraAmni
@DestraAmni 3 жыл бұрын
Nice fungtion
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
Thank you!
@davekl6443
@davekl6443 3 жыл бұрын
Can i upgrade old firmware from v 1.13 to the newest???? The radio works fine now without the extras.
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
You are absolutely right - the radio works fine without doing any firmware updates and the extras aren't necessary. I don't know for sure that you can go from 1.13 to current, but I would suspect it wouldn't be an issue. The release notes documentation, or the upgrade screen warning should say otherwise if that were the case.
@r_kuhl
@r_kuhl 2 жыл бұрын
In case it helps someone else, my final 'yes' button had to be held down for a full second if not two.
@netwarecracks7780
@netwarecracks7780 3 жыл бұрын
works for me thanks
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
Excellent, glad it worked for you! This seems to be a stable firmware update. Hopefully we'll see more from Icom over the next few years.
@Bro-f3h
@Bro-f3h 2 жыл бұрын
I don't get it?
@crnmurthy
@crnmurthy 3 жыл бұрын
tnx for the video.....73.....de vu2chr murthy
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
You are very welcome. I hope it helped. 73 AC3DS
@Markinpuff
@Markinpuff 3 жыл бұрын
Why do people call this radio a entry level rig? It’s not,
@transmittinguntilrobotsrep1045
@transmittinguntilrobotsrep1045 3 жыл бұрын
That is a good perspective to bring to the discussion, and I really need to give it some more thought. I suppose that I've referred to it as an entry-level rig because it was where I entered the hobby, being my first HF radio. I've seen and briefly used an expensive ($3000+) radio, and I think that has been my internal comparison point. Upon some reflection now, I can see that while the 7300 might be where I started, it is not necessarily appropriate to compare it to the $3,000+ radio group as they may serve different purposes. This is definitely something for me to think about... Thank you! 73 - AC3DS
@researchcapt
@researchcapt 2 жыл бұрын
It's my first transceiver and it did not take me long to learn it. There are IC 7300 tutorials all over KZbin now. We are up to Rev 1.41 now. 73 KO4KYI
IC 7300 A to Z #43  Firmware Version 1.40 Update Part 1
19:14
Ham Radio A2Z
Рет қаралды 38 М.
Icom IC-7300 firmware V1.41 (July 2021)
14:09
Transmitting Until Robots Replace Us
Рет қаралды 25 М.
Ouch.. 🤕⚽️
00:25
Celine Dept
Рет қаралды 29 МЛН
Бенчик, пора купаться! 🛁 #бенчик #арти #симбочка
00:34
Симбочка Пимпочка
Рет қаралды 4 МЛН
Não sabe esconder Comida
00:20
DUDU e CAROL
Рет қаралды 57 МЛН
Updating the ICOM IC-7300 Reference Station Firmware (#378)
21:23
David Casler Ask Dave
Рет қаралды 16 М.
ICOM IC-7300 / WSJT-X FT8 Latest 2021 Setup Guide V1.4 or Higher
22:45
Better Receiver Reception - Lower Noise - Demo with IC-7300
22:20
watersstanton
Рет қаралды 82 М.
IC 7300 A to Z #44 Version 1.40 Firmware Update - Part 2
20:26
Ham Radio A2Z
Рет қаралды 17 М.
Icom IC-7300 Settings for SSB Voice
12:05
Transmitting Until Robots Replace Us
Рет қаралды 87 М.
Icom IC7300 A to Z #40 Internal Antenna Tuner Operation
18:09
Ham Radio A2Z
Рет қаралды 82 М.
Icom IC-7300 HF/6m Radio Walkthrough (#200)
34:00
David Casler Ask Dave
Рет қаралды 135 М.
INSTANTLY Improve Your Icom Radio's Waterfall with THIS!
8:40
Ham Radio DX
Рет қаралды 56 М.
Downloading Images From US Military Satellites
26:51
saveitforparts
Рет қаралды 916 М.
ICOM IC-7610 -NEW FIRMWARE v1.40 FULL INSTALL- Firmware is Risky - Do at Risk to your Radio
5:53
HAMTech RADIO SCANNER M0FXB CB DRONE HOBBY Diary
Рет қаралды 3,2 М.
Ouch.. 🤕⚽️
00:25
Celine Dept
Рет қаралды 29 МЛН