If the Mobula 8 and Pavo Pico had a baby... | PicoBula Set Up & Binding & Flight Test

[@throwingstones96]

I have the mobula 8 drone and wanted to try out the Pico frame thanks so much for sharing really made it easy for me to decide!

[@iFLYXWings6589]

Glad this helped

[@nicklong9985]

Nice

[@dronefilmsgermany]

Lovely video. I would like to know if I can add the Caddx Vista Nebula Pro to the Pavo Pico 20 and use DJI Googles 2 with it? CADDXFPV Nebula Pro Vista Kit

[@iFLYXWings6589]

Yes, you can. For the binding process you can check out this video How to Bind DJI Vista Air Units to the DJI Goggles 2 or Integra? #dji #drone #fpv #cnhl kzbin.info/www/bejne/oYjZdn6kp819gZY

[@bestfield372]

Is it same wire use for vista and 03 to FC? Thanks

[@iFLYXWings6589]

The plug is the same for sure ~ just make sure the line up is correct 5V to 5V & G to G

[@bestfield372]

@@iFLYXWings6589 thanks for replying

[@dronefilmsgermany]

Quick question - Do you need to solder the VTX to FC or is it Plug and play like dji o3 air unit?

[@iFLYXWings6589]

It’s a plug and play for the F405 HD

[@iFLYXWings6589]

For the vistas you will still need to solder on the plug, as they do not come pre soldered

[@damianwyczakowski2491]

Hello

[@jorceleyoliveiravela5162]

what was the original yaw degree and the 1st gyro set to ?

[@iFLYXWings6589]

TBH I forgot but This is the crazy F405 AIO there should be default CLIs

[@nicholasstocker1952]

Good evening I have built something similar to your build only difference is I’ve used the original Pico motors as that’s what I had. And every time I arm the drone it just spins about 90’ and then stops Any ideas? Thanks

[@iFLYXWings6589]

This is a runaway 1. Check your board orientation 2. Check your motor direction

[@nicholasstocker1952]

Thanks I will have a look when I get back home. Is the direction of the board governed by the first gyro or the Yaw degrees. Sorry new at building a drone so first time with beta flight

[@nicholasstocker1952]

Hi I have sorted it, it was one of the motors spinning incorrectly. Thanks for your help 👍

[@MdMasum-jc1uy]

can i convert my mobula 7 hd 3s to pavo20?

[@iFLYXWings6589]

Yes, you should be able to, some tweaks might be required tho

[@damianwyczakowski2491]

Betafpv sucks, aio in my pico diesel after two months. Mobula 8 is better I put mobula8 on carbon frame of pavo pico without ducts and is great

[@iFLYXWings6589]

I will say HM equipment are more durable in a sense BF not so much.