One man's TRASH is another man's TREASURE!! Plus something just got a NEW ENGINE

  Рет қаралды 59,809

IFarm WeFarm

IFarm WeFarm

Күн бұрын

Пікірлер: 175
@liamswanney3881
@liamswanney3881 3 жыл бұрын
Adrian always keeps your thumb on top of the starting handle, that way if it backfires while starting the handle spins out you hand, of you have your thumb below the handle and it back fires it will break your wrist, seen it happen
@johnnytyrrell7060
@johnnytyrrell7060 2 жыл бұрын
I work on a concrete pump here in Dublin and we dump about Half a meter or more at the end of every day so if you ever see a concrete pump near you us pump driver's are always looking for a place to dump out the Hopper at the end of a pour and we are happy to give it away so we can wash out because it Start's to go hard if we have to drive to a concrete plant to wash out.
@TB-nh4dg
@TB-nh4dg 3 жыл бұрын
Brilliant. Exactly the reason I love this channel is for this type of content, the maintenance of equipment and the many skills on display including the knowledgeable commentary from Adrian. The man is in his element… 💪🚜
@IFarmWeFarm
@IFarmWeFarm 3 жыл бұрын
I wouldn’t say that but thanks mate, appreciate that
@georgiaannbicknell6129
@georgiaannbicknell6129 3 жыл бұрын
@@IFarmWeFarm Adrian, see, they agree with my assessment-you're a fine teacher. Thank you, another excellent and instructional video. Hope that you get that little filter off too.
@user-pe4sx7ey3m
@user-pe4sx7ey3m 3 жыл бұрын
There no sales talk out of ya , down to earth honesty 👍😀
@shaneprior
@shaneprior 3 жыл бұрын
Great video Adrian, my cousin was a builder, he had the same mixer, i worked with him, it had to be washed every time it was used, he still has it, and his son uses it now, great wee mixer!
@Ragnar8504
@Ragnar8504 4 ай бұрын
I couldn't help but think of Dan (Escape to Rural France) when watching the lesson on cleaning cement mixers! I'm not sure how he treats his current one but his old mixer was in an incredible state. At one point Dan dropped so much concrete around the base that the mixer was cemented to the ground and he couldn't move it. Of course he always banged the drum with a hammer. My parents bought an ancient electric mixer maybe ten years ago, a 3-phase beast, probably from the 60s. It's beastly heavy compared to a modern one the same size but with new bearings it will probably outlive all of us.
@raymondconnolly1435
@raymondconnolly1435 3 жыл бұрын
Well done great video a little tip never hold the handle of the mixer like a shovel always keep your thumb the same side as your finger if the mixer fiers back it would brack your thumb 👊
@donnellykieranj
@donnellykieranj 3 жыл бұрын
My late father always told me that and 99% of the time that's what I do. But sods law, one of the very few times I didn't, guess what? Broke my wrist...6 weeks in plaster.
@gerry6420
@gerry6420 3 жыл бұрын
Mixer is fierce handy article around a place, that’s a good straight on too. Good job 👍
@paddy582
@paddy582 3 жыл бұрын
Turn the drum of the mixer up when starting Adrian, will start easier, especially with a mix in it.
@brianocallaghan7716
@brianocallaghan7716 3 жыл бұрын
If it was mine, I'd replace the axles with larger ones. Then put on more substantial wheels and tires.easier to roll over stones and obstacles.
@douglasmorton6121
@douglasmorton6121 3 жыл бұрын
I find your channel so interesting and relaxing to watch. I love the odd jobs that need fixing just as much as the farming videos. This viewer from Connecticut, U.S.A. is hooked. Have a great day and Stay Safe!
@IFarmWeFarm
@IFarmWeFarm 3 жыл бұрын
Cheers Douglas 👍
@davidrigby1543
@davidrigby1543 3 жыл бұрын
Well done again Adrian your enthusiasm is a real tonic Cheers
@s.j.jeanne8408
@s.j.jeanne8408 2 жыл бұрын
Adrian paint it love seeing your equipment looking so great, I think you have the tidiest farm on KZbin 😅 love the videos of you expanding the farm.
@FlyingFergyMan
@FlyingFergyMan 3 жыл бұрын
Great video Adrian, every time I watch your videos you have a new bit of kit in the yard, well done. I don’t think that machinery house is going to be big enough now😁😁.
@spideybrent
@spideybrent 3 жыл бұрын
Hello from Yorkton, Saskatchewan, Canada. Thanks for sharing your great video’s please keep them coming.
@swblandyman
@swblandyman 3 жыл бұрын
The bowl comes off and it’s a Crossland 489 or equivalent filter in there.give the bowl a twist with a pair of slip jaw pliers as it tends to bite in to the O ring. We used to Wax oil ours before they went out on hire and then when washed the cement used to just flake off.
@IFarmWeFarm
@IFarmWeFarm 3 жыл бұрын
Thanks mate I will try that for sure 👍
@swblandyman
@swblandyman 3 жыл бұрын
@@IFarmWeFarm another useless bit of info, if you find the handle is too close to the panel you straightened, there is a starting dog which the starting handle locks on, this sometimes gets knocked back on the shaft, remove the big panel and the round guard and you will see that the starting dog is adjustable as in you can slide it along the shaft and keyway.
@FarmerBoBonYoutube
@FarmerBoBonYoutube 3 жыл бұрын
Use standard rubber wheel barrow wheels, they are very cheap. It is what i used on my mixer which is a 250. ;)
@sandymcghee3328
@sandymcghee3328 3 жыл бұрын
Great video Adrian keep them coming 👍👍🇬🇧🇬🇧🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿
@martindavys2110
@martindavys2110 3 жыл бұрын
Hi Adrian, (mixer chain - bodge suggestion) chop a spare chain link and weld onto the handle stem then when unhooking from the mixer; you can hook straight onto the stem - keeping the chain off the ground,cleanish,tidy and safe. Thanks for sharing a busy life.Good health and Good luck to all.
@IFarmWeFarm
@IFarmWeFarm 3 жыл бұрын
Great tip Martin, thanks mate
@nickymurphy522
@nickymurphy522 3 жыл бұрын
Give the sediment bowl a light tap,has a filter inside.The old beet cleaner had a lister engine .cranked them thousands of times good luck
@dodge7679
@dodge7679 3 жыл бұрын
Great Vlog A..Use to have a similar mixer when I a snotty noise pup and had to use a rope to start it...yad be fecked at the end of the day...but one thing I made sure to do was clean it properly....neighbour of my parents bought it and still uses it to this day
@dodge7679
@dodge7679 3 жыл бұрын
When i was a Snotty nose pup
@michaelcoffey8008
@michaelcoffey8008 3 жыл бұрын
Small tip I'd keep my thumb over the top of handle when swinging it if it kicks back it won't break your thumb just slip out of the hand
@IFarmWeFarm
@IFarmWeFarm 3 жыл бұрын
Yes a lot of people said that, I will from now on. Thanks for the good tip 👍
@alvinolson1
@alvinolson1 3 жыл бұрын
Enjoy your videos, variety, pace, knowledge, and edited into an informative video. Well done
@mikeduffy7271
@mikeduffy7271 3 жыл бұрын
Yeah the commentary is really great along with the content.
@johnhayes4110
@johnhayes4110 3 жыл бұрын
Put pumped wheels on it much easier to move, also cut the fuel line&put a on line filter, also if you have a miny digger you could make a Hopper for filling, just a few suggestions 🤔, great vedio 👍
@TWJW
@TWJW 3 жыл бұрын
We’ve just got a brand new one here a few months ago electric start and all on it great machine
@petetheresellerandscrapper849
@petetheresellerandscrapper849 3 жыл бұрын
The sediment bowl does come off give it a gentle tap it should come down the engine it's self first got produced 1960 finished production 1990 they are 1hp upto 3hp good reliable engines if you want any second hand parts any time let me know I've loads here
@thatmrking
@thatmrking 3 жыл бұрын
We bought a 3 point concrete mixer which does nearly 1 cubic metre of concrete which is large but we have concreted our yard with it as it's cheaper than a lorry. We use a mini digger to load it, its ran by our 100hp plus same and two of us have used it perfectly. It would be ideal for you to pour your shed floor or pillars or concreteing your yard
@thatmrking
@thatmrking 3 жыл бұрын
Also you mentioned the shed we have an entire shed made of esb poles you can get like 20fts for the roof beams and 15fts for the pillars, auger a hole about 3ft deep, place your pole in, half Barrow of concrete around it and then put your 20ft poles on top in whatever way you wish and you can notch them and join them with esb bolts. We notched them like half way for the joints. Then you can get 4 x 2 boards, notch them slightly into the top poles and you can bolt your sheets to that and you have a fair cheap shed, I can dm a pic of the shed on Instagram if you wish
@dane5896
@dane5896 Жыл бұрын
Those dogs love hanging around with you. 🐕🐩
@johng2567
@johng2567 3 жыл бұрын
Tractor guard in the box is a good buy for the new tractor. Fairly quick and easy to put on and off too.
@stephenwebster7960
@stephenwebster7960 3 жыл бұрын
The filter does come off great little engine and reliable and I know you will look after it 😉well done great video and great content 👍
@jamesjohnston1007
@jamesjohnston1007 3 жыл бұрын
Great video Adrian. Good luck with your mixer
@barry885xl8
@barry885xl8 3 жыл бұрын
Great video, every farmer needs one.
@KevHarkins1
@KevHarkins1 3 жыл бұрын
Top man, cant think of a more honust way to make a living. Thank you for all the excellent content and insights. Respect
@paulmccabe9117
@paulmccabe9117 3 жыл бұрын
👍🏻.. master craftsmen at work…
@alexshaughnessy1760
@alexshaughnessy1760 3 жыл бұрын
I have the exact same engine in a bigger mixer and it never misses a beat
@scoyle1750
@scoyle1750 3 жыл бұрын
I spent years doing my bricklaying apprenticeship on one of them mixers seen more of the shovel than the trowel in them days but making up for it now have never put me trowel down in thirty years, why did you not get a pan mixer for back of tractor although value wise that mixer is ten times better and engine is bullet proof so I suppose it makes sense but pan mixer is great as can fill it with mini digger and is the best mixer for floor screeds👍
@1Thepool
@1Thepool 3 жыл бұрын
You might connsider using second hand RSJ's salvaged from other buildings for your new shed. A bit of fabrication involved but between yourself and maybe a few days work for a fella handy with a cutting torch and a welder , it'd save a pile of money . Fabricator by trade here and happy to advise further.
@IFarmWeFarm
@IFarmWeFarm 3 жыл бұрын
Yes I’ll alway looking online for them, problem is a lot of lads are looking a small fortune for stuff as they know the price of steel. I’ve seen some guys that are pricing stuff as new 🤷🏻‍♂️
@jamesmccullagh8212
@jamesmccullagh8212 3 жыл бұрын
Great videos. If you were thinking of cleaning the mortar off the mixer to help tidy it up, if the mortar isn't very heavily caked on it there is stuff I use for our mixers etc called Guard Industries Premium GTR for breaking down concrete and the likes. I find it great stuff to help clean a mixer up
@glenkoopman7347
@glenkoopman7347 3 жыл бұрын
If you want a tidy job to hold the towing handle up on the mixer stick abig magnet on it maybe?
@jamesflynn875
@jamesflynn875 2 жыл бұрын
Very good vedio thanks
@tinkeringtaylor3053
@tinkeringtaylor3053 3 жыл бұрын
the fuel bowl should come off try giving it a tap around the bowl itself but there should be a rubber ring around the neck that you will have to watch or make sure you have a new one
@jonathanturner142
@jonathanturner142 3 жыл бұрын
There is a filter in that bole and as you said it is possible sezed on
@themayorofdipshittery3646
@themayorofdipshittery3646 3 жыл бұрын
Adrian, get that mixer fired up and lay the floor for your new machinery shed when you get a minute, it’d give you a good flat area for all your servicing etc until you have time to get a roof up 👍. Always love when I get notification of one of your videos 😎
@IFarmWeFarm
@IFarmWeFarm 3 жыл бұрын
Cheers lad 👍
@PaddyGun
@PaddyGun 3 жыл бұрын
I knew it after seeing the freshly poured floors on Instagram, I have nearly the exact same mixer which was converted to a 110v motor and mine has much bigger wheels ( wheelbarrow wheels i believe,
@IFarmWeFarm
@IFarmWeFarm 3 жыл бұрын
Yes she nearly payed for herself yesterday alone 👍
@newellbros1483
@newellbros1483 3 жыл бұрын
Nice video. Looking forward to hearing the put-put of that mixer
@anthony342
@anthony342 3 жыл бұрын
the old Irish tumble-dryer.’
@unaoconnor3628
@unaoconnor3628 3 жыл бұрын
Of course you'll paint it, you know you will! Decals, the whole lot 😄👍
@IFarmWeFarm
@IFarmWeFarm 3 жыл бұрын
You know me to well 🤣🤣🤣
@cheekymonkey666
@cheekymonkey666 3 жыл бұрын
get your self a bucket full of beach pebbles the size of your fist from the coast, use them to clean the inside of the mixer after each use, works a treat! a good lick of paint that mixer will be around for a while yet... i prefer painted clean machinery... get some heat resistant sealant and put a bead of it around the seal areas... for the scraper... then use a light jet wash to clean it....
@edwardbonner9365
@edwardbonner9365 2 жыл бұрын
Nice little videos.
@gerardkeohane740
@gerardkeohane740 3 жыл бұрын
Bee jazus the sound of her brings back manys a memory
@colmanlong1032
@colmanlong1032 3 жыл бұрын
Excellent video,Time out really important.
@deefinn9377
@deefinn9377 3 жыл бұрын
Great video Adrian. Its the simple things in life. Watched Finnegans rebuild two John Deers. While interesting got more kick out of your mixer and scraper ! 😄🤫😄
@IFarmWeFarm
@IFarmWeFarm 3 жыл бұрын
Yes they’ve a good channel, watched a few of there videos lately
@MASSYMADMAN
@MASSYMADMAN 3 жыл бұрын
A very handy machine to have on the farm
@patmartin7907
@patmartin7907 8 ай бұрын
Ha ha ha Irish farmer taking a day off never heard of great video
@megafabltd
@megafabltd 3 жыл бұрын
Love the thought that goes into the camera work 💯 the camera inside the mixer when welding is class 👏 👌
@IFarmWeFarm
@IFarmWeFarm 3 жыл бұрын
Cheers Micheal
@georgiaannbicknell6129
@georgiaannbicknell6129 3 жыл бұрын
Wait! He puts the camera on the grab when he is feeding the cows in the Winter. That's fun too!
@megafabltd
@megafabltd 3 жыл бұрын
@@georgiaannbicknell6129 It takes a specail kind of brain to think these things up!
@johnryan4845
@johnryan4845 3 жыл бұрын
It's a pity you didnt look at the jarmet pan mixer, cheap to buy, great to mix and you can load with your front loader, save your back and you can pour in the location you need it. I find it a godsend for floors, foundations and concreting posts...
@tommitchell1826
@tommitchell1826 3 жыл бұрын
well ware adrain with mixer braught me back to when i worked in London in the 80's as a labour to bricklayers
@jamessparrow6549
@jamessparrow6549 3 жыл бұрын
Nice old thing 👍🏻
@Panchdeburca
@Panchdeburca 3 жыл бұрын
Super stuff as always Adrian, wish I had half your skills!!
@decalshedsignsco6849
@decalshedsignsco6849 3 жыл бұрын
Great video, great purchase
@garymadden2656
@garymadden2656 3 жыл бұрын
They are a great engine Adrian ive used that sort of mixer for years 👍
@j.t.hlandscapingservices6800
@j.t.hlandscapingservices6800 3 жыл бұрын
I have the same mixer and engine of my grandad ready for restoration nice find mate
@FarmerBoBonYoutube
@FarmerBoBonYoutube 3 жыл бұрын
Use an oil filter removal tool and turn that sediment bowl with it, it should come off for sure.
@paulf2529
@paulf2529 3 жыл бұрын
I have the same honda 5.5hp easy start engine on a husquvarna walk behind mower. I can't fault it and it does seem to live up to its name starting on the first pull.
@jimmy75256
@jimmy75256 3 жыл бұрын
Very nice mixer
@mikecrawshaw9727
@mikecrawshaw9727 3 жыл бұрын
Try using a pneumatic Needle Scaler for removing the hardened cement, works wonders 👍🏻
@colliesheridan3248
@colliesheridan3248 3 жыл бұрын
When starting the mixer Adrain always keep your fingers and thumb on the same side of the starting handle other whose if the mixer kicks back you may break your thumb
@amps8lfc
@amps8lfc 3 жыл бұрын
Hi Adrian. We have one of these mixers sat doing nothing in our yard. Bought a new one last year. Il have a word with my boss and see if he wants to sell it.. it's in pretty good condition
@user-rw2um8ro2p
@user-rw2um8ro2p 3 жыл бұрын
Great video Adrian take the day off and spend it with the kids and your wife I’m like you have to be at something and worked 7 days a week for months on end for years missed the kids growing up but changed my job and making up for it once the time is gone it can’t be brought back family is the most important thing in make the most of your time with the kids as they grow up so fast
@ianhaggart1438
@ianhaggart1438 3 жыл бұрын
Nice mixer👍 wheel barrow wheels fit there on our one at work and the drawbar swings round under the mixer beside the forklift pockets onto a hook bracket. Still like the barbecue idea though 😉😂😁 Stay safe 🏴󠁧󠁢󠁳󠁣󠁴󠁿
@donnellykieranj
@donnellykieranj 3 жыл бұрын
I bought a very similar one in 2004 for building my house. Sold it 3 years later. Regretted it ever since. Always gr8 to have one about when you need it. I have a wee electric one as well, but just not that same.
@clydemarkham7915
@clydemarkham7915 3 жыл бұрын
Great video and content.
@massey7616
@massey7616 3 жыл бұрын
Great video Adrian, if memory is right from days moving mixers wit teleportor on sites the handle turns round under mixer and ha gs on a hook. A good mixer round the yard is worth a lot, u've lots of work lined up for it anyway, fun days ahead looking into "Paddy's television" (mixer known as in England on sites). Keep up the good work 👍
@DonegalTDI
@DonegalTDI 3 жыл бұрын
That thing will die of shock with all the loving attention being bestowed on it. Hopefully not! Well done.
@georgiaannbicknell6129
@georgiaannbicknell6129 3 жыл бұрын
Mr. Gallagher, that is probably the most grease, oil and cleaning fluid it has had since it was new.
@jamesboyle1038
@jamesboyle1038 3 жыл бұрын
Maybe the next time your starting the mixer try not too rap your thumb around the handle in case of kick back. Trust me it’s some thing you don’t want to happen. Great 👍 we mixer 💪💪
@danwaters115
@danwaters115 3 жыл бұрын
The sediment bowl should have a filter in it you can get them of the Internet for about 5 or 6 quid.
@IFarmWeFarm
@IFarmWeFarm 3 жыл бұрын
I can’t find them, looked on eBay, Amazon and all over the place.
@patrickrocks3312
@patrickrocks3312 3 жыл бұрын
Interesting vlog.
@kieranj9484
@kieranj9484 3 жыл бұрын
Adrian to clean the mixer put stones the size of you fist and it leaves it spotless
@kieranj9484
@kieranj9484 3 жыл бұрын
Ya the stones are a mighty job
@rogern.9226
@rogern.9226 3 жыл бұрын
I have been trying to figure out how much a quid is in dollars I'm from the u.s. Adrien ur channel is awesome the videos alway get me to relax I think it's because u have a cozy little farm amongst the rolling green hills. Keep up the good work I'm lookin forward to the next restoration video.
@IFarmWeFarm
@IFarmWeFarm 3 жыл бұрын
Cheers Roger
@paulmurray750
@paulmurray750 3 жыл бұрын
Roger a quid is slang for a pound which is worth 1.38 USD. I agree great channel.
@ciaranconeely8579
@ciaranconeely8579 3 жыл бұрын
Adrian is talking about Euro there; one Euro is $1.18 dollars, today.
@farmboy2175
@farmboy2175 3 жыл бұрын
What engine is on the winget 150 nice video
@conorm2761
@conorm2761 3 жыл бұрын
Wire brush front plate of scraper and a few coats of galvanise spray it would look well
@henryforrest3407
@henryforrest3407 3 жыл бұрын
Sometime you're out for a spin to Fermanagh there's plenty of those fuel filters at BT93 0EN, Think they cost me one of your 'quids'
@liamroberts476
@liamroberts476 3 жыл бұрын
Pat Hinch tyres tullamore solid wheels for 35 euro each new
@jeffsmith5350
@jeffsmith5350 3 жыл бұрын
I work on a smaller mixer still going now not much to go wrong' idea for your apprentices to work on
@Rmc456
@Rmc456 3 жыл бұрын
You’ll break your thumb starting it like that if it kicks back. Put your thumb over the handle
@JACK11168
@JACK11168 3 жыл бұрын
Great video
@Smith-os1ho
@Smith-os1ho Жыл бұрын
Were did you buy, looking out for one
@bob7923
@bob7923 3 жыл бұрын
When your loading one of them mixers all day every day and block layers shouting at you for more muck. the last thing on your mind at the end of the day is cleaning the bastard!
@IFarmWeFarm
@IFarmWeFarm 3 жыл бұрын
I here ya 🤣👍
@bigearny6
@bigearny6 3 жыл бұрын
Hi is it not easier if your doing a bit of concreting to have a ready mix wagon bring it you?
@IFarmWeFarm
@IFarmWeFarm 3 жыл бұрын
Yes but they don’t come with small amounts anymore, 5 meters minimum.
@bigearny6
@bigearny6 3 жыл бұрын
@@IFarmWeFarm we are lucky they will bring is 1m3 if we need it, love the old Lister engines nice buy
@karlmartin7384
@karlmartin7384 3 жыл бұрын
3 meters is over 60 barrows🤣 I'd be finishing them floors as you're coming out as by the time you've them all in it'll be gone off😄
@petrosros
@petrosros 3 жыл бұрын
Spend as much time with the kids as you can, they will be teenage/adults before you know it and you'll be left with only your memories.
@petespeers4198
@petespeers4198 3 жыл бұрын
Tractor gaurds in the box if so great job i have them fir our tractor
@trucker-ron
@trucker-ron 3 жыл бұрын
Twist handle down underneath machine should be hook under there if not out with the welder lol 😆 Hook are on newer ones
@modelfarmer3909
@modelfarmer3909 3 жыл бұрын
Great vid hai
@Jarret888
@Jarret888 3 жыл бұрын
Can ya not turn the front wheels right around and clip handle under frame keeps it away from the big tippy wheel thing 😆
@andyhuckle
@andyhuckle 3 жыл бұрын
you have to paint the mixer Massey red !!
@lukeclancy2027
@lukeclancy2027 3 жыл бұрын
What welder did u use do review please
@iancoupe20v43
@iancoupe20v43 3 жыл бұрын
unreal never even chucked out black smoke when she started
@Shane_O
@Shane_O 3 жыл бұрын
I’m on the late side of my 40,s and I remember these as a lad…. How old is this?
@paddy294
@paddy294 3 жыл бұрын
Your a very economical person Adrian. What age are the dogs. They are very clever
@IFarmWeFarm
@IFarmWeFarm 3 жыл бұрын
Hutson is nearly 7 and Bailey is 2. Yes there very set in there ways and a bit spoiled too be honest 🤷🏻‍♂️
@DuckBrady
@DuckBrady 3 жыл бұрын
Adrian whats that spray you used to get rid of the oil
@IFarmWeFarm
@IFarmWeFarm 3 жыл бұрын
Just brake cleaner, used could use an engine degreaser or WD40 also. The brake cleaner dries instantly with is great
КОНЦЕРТЫ:  2 сезон | 1 выпуск | Камызяки
46:36
ТНТ Смотри еще!
Рет қаралды 3,7 МЛН
Вопрос Ребром - Джиган
43:52
Gazgolder
Рет қаралды 3,8 МЛН
Vampire SUCKS Human Energy 🧛🏻‍♂️🪫 (ft. @StevenHe )
0:34
Alan Chikin Chow
Рет қаралды 138 МЛН
HOW TO FRAME AND POUR A CONCRETE SLAB BY YOURSELF | SHOVEL TO MIXER
22:58
I Bought a Broken 11 Ton Forklift, Can I Save It?
39:30
Watch Wes Work
Рет қаралды 193 М.
THE NEWLY IMPROVED MF 5460 IS FINISHED
24:43
IFarm WeFarm
Рет қаралды 88 М.
DUMP TRUCK'S BAD DAY!!!  SLIP SLIDING AWAY!!!
1:15:29
Ron Pratt
Рет қаралды 87 М.
Rescuing An Old Gem From The Scrap Heap -- Honda Big Red Trx 300
16:34
Harvest is OVER | Pivot Maintenance
30:36
Laura Farms
Рет қаралды 90 М.