Cantilever Beam: Shear Force and Bending Moment Diagram [SFD BMD Problem 2] By Shubham Kola

In this video we are Going to Learn about How to solve problems on Shear Force diagram [SFD] and Bending Moment Diagram [BMD] for cantilever beam with two Point Loads. In this problem Two loads is acting downward because of that the reaction offered by the supports will be in upward direction. So at point A there will be Ra i.e. reaction at point A
Timecodes
0:00 - Problems on Shear force and Bending Moment Diagram [SFD and BMD] for Cantilever Beam
0:09 - Calculations of Reaction forces for Cantilever Beam
0:57 - Shear force Calculations for Cantilever Beam
3:57 - Bending Moment Calculations for Cantilever Beam
4:17 - Sagging Effect and Hogging Effect for Cantilever Beam
This problem we are going to solve it, in 3 simple steps.
1. Calculate the values of support Reaction.
2. Calculation of Shear force
3. Calculation of Bending Moment
Note: In shear force diagram, whatever the Portion drawn above the reference line, I will show this by positive sign. And the Portion drawn below the reference line, I will show this by negative sign. So here I have completed shear force diagram
Note: In bending moment diagram, whatever the Portion drawn above the reference line, I will show this by positive sign. And the Portion drawn below the reference line, I will show this by negative sign.
#shear_force_and_bending_moment_diagram
#cantilever_beam
#strength_of_materials
#problems_on_sfd_and_bmd
#shear_force_and_bending_moment
#cantilever_beam_with_point_loads
#shear_force_and_bending_moment_diagram_for_cantilever_beam
#sfd_and_bmd_for_simply_supported_beam
#Shubham_Kola
You can also watch separate videos for Shear Force and Bending Moment Problems on 4 types of beams -
Cantilever Beam - • Cantilever Beam: Shear...
Simply Supported Beam - • Simply Supported Beam:...
Overhanging Beam - • Overhanging Beam: Shea...
Simply Supported Beam with Uniformly Distributed Load - • Uniformly Distributed ...
You can also watch Playlist on Shear Force and Bending Moment Solved Problem
Shear force and Bending Moment Diagram Solved Problems - • Shear force and Bendin...
Faculty - Shubham Kola
Email ID - [e-mail]
From - Maharashtra ( India )
KZbin Channel ( Shubham Kola ) - / @ifinfotech
Disclaimer -
video is for educational purpose only. Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favour of fair use. The content in this video is collected from books, media, internet space etc. This is strictly for educational and information purposes and is not intended to be advice or recommendation of any kind whatsoever. The faculty is not a subject expert. The faculty is sharing his knowledge in the form of videos. The faculty giving small basics information on mechanical engineering topics. We endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the video or the information, related graphics contained in the video for any purpose. any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable for any loss or damage without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arise out of, or in connection with, the use of this video.

[@user-qo4jv6cv3s]

sir your video is obvious and attractive, but others are wasting not only their time but also our time. I pray for you,

[@manasakelavathu7065]

Super teaching

[@parthmistry7108]

Thank you soooo much sir concepts are clear due to your videos you are great ❤

[@scoutyt216]

Thank you bro your explanation is too good

[@ifinfotech]

All the best

[@md.hasanuzzamanjihad4623]

This is most helping and easy explanation. Thanks bro

[@AbdulAlim-ly9ct]

Gggggggj

[@user-uh1gz9by7u]

Thanks so much

[@user-qo4jv6cv3s]

thanks sir ,i am very thankfull to you

[@ifinfotech]

Most welcome

[@sahanapatil4911]

Thank you so much sir 😊

[@ifinfotech]

You're welcome!

[@sundramjaiswal2006]

Thank you sir😊❤

[@ifinfotech]

You're welcome

[@maheshkhade5808]

Sir i have doubt is it compulsary to find bending moment at c from right side because from left side the value of c comes 3.5

[@suryakiran3085]

Same doubt .

[@grimquokka9843]

did you get the reply?

[@grimquokka9843]

also, at point load b, we get - 4.25KN from left side of calculation. can you explain if you have understood

[@techifers]

God bless you. Wish me success in my test, today.

[@ifinfotech]

Best of luck!