IFLIGHT TITAN DC5 DJI HD FPV QUAD FULL REVIEW

[@PrivatePaul]

hey what's that song at the end?

[@paulrossfry1976]

Hi there were did you get the GoPro mount from, many thanks

[@SolentSkyServices]

Great video Richard 😀

[@ImagesHunter]

Hello. What have you do in the DJI Air Unit Antennas? Have you lined them with thermoplastic?. Do you know if the TITAN DC5 have something like a "Diatone Mini 2A" to can use the Air Unit with 6S Lipo voltage?. Thank you very much. Regards : )

[@RichardGilmoreDronetech]

nah, Ive busted the stock atennas, and am now using Foxeer lollipop antennas. their is a 6S capable Iflight TITAN. the F7 twin G D version flight controller has a built in 9v 2.5A BEC. This is the FC used in the DC5 TITAN.

[@ImagesHunter]

@@RichardGilmoreDronetech Hi Richard. And do you know if the "SucceX-E Mini F4 2-6S Flight Controller" have also has a built in voltage regulator?. I am seeing that have "BEC：5V 2.5A". Then, I can not use 6S Lipo with this flight controller and the DJI Air Unit, right?. I am thinking in install a Diatone Mini 2A to change the 22.2v of the 6S Lipo to 12v and then connect the air unit. It is for use in a iFlight MegaBee F4. Thanks

[@petertothRC-FPV]

Good show pointing out the motors i have them both also.Nice model i like the 6S deadcat goggle combo🏆

[@biscuitsalive]

whats your thoughts on this quad form someone's first quad, (4s model)?

[@RichardGilmoreDronetech]

To be totally honest. For a beginner. Although I love this quad mate. It's Awesome. But a bit light. Front and rear arms have weak spots. So not really beginner friendly. I was flying today. It's awesome. You could just buy a couple of extra arms or an extra frame like I did. And fix it. But I think something a bit stronger would be a better choice.

[@biscuitsalive]

@@RichardGilmoreDronetech thanks for your input, i think im bound to make some mistakes to begin with. i will have a look around at some more options, but a UK quad shop has suggested this dc5 could be ok for me.

[@biscuitsalive]

@@RichardGilmoreDronetech like you say, if i buy a couple of spare arms, and maybe some sort of chin guard for camera perhaps, then hope for the best

[@Reingekotet]

Hi, nice Video! What are the PIDs you are using?

[@MarkP45]

I have recently bought the iflight 6s bumblebee, love it but want this bad boy next, hopefully after all the madness, ill get a chance. good vid Richard, big difference from the dji fly themselves drones .

[@MarkP45]

Had the dc5 now for a week, great drone but what are your pid settings like, for a more fast experience. My settings are 667 for turns etc.. any advice? thanks

[@h975]

How you recommend to install the propellers?

[@ImagesHunter]

Hello Richard. Please, Could you tell me what model is the internal capacitor for battery Lipo connection? Is it 35V 680UF 50A ?. Thank you. Regards

[@nieder-olm]

Dc5 or Mark 4? Which one is better for freestyle and cinematic flying?

[@camomaster6316]

How hard are iflights bnf's to setup for a beginner. Not good at setup yet They say just bind to my dji stuff but there's gotta be some setup involved. I'm eying the titan xl5!

[@RichardGilmoreDronetech]

Yes mate. There will defo be set up involved. It will probably be Stock Betaflight tune with one channel set up for arming. However you'll probably want different flights modes set, failsafe, beeper, turtle mode etc etc. It won't be too hard. Maybe for beginners a bit longer. Few days to figure out Betaflight etc. But you'll get there.

[@lukas1936]

hey , were did you got the tpu cam mount ?thx

[@RichardGilmoreDronetech]

From IFlight.com 👍

[@lukas1936]

@@RichardGilmoreDronetech thx

[@Spinfast]

Hey man, nice review. Get a little more light on your table and your videos will get more sharpness also. On a side note: I really think they are called XING --- "ksing" motors.

[@pelletubbies]

And pronounced "shing"

[@h975]

Hi! I can't arm my DC5 what's the arm sequence you are using from the remote? Thanks!!!

[@RichardGilmoreDronetech]

Throttle to Zero. And Arm via arm switch. Suggest that you connect to Betaflight and check and test everything.. Receiver and modes tab.

[@h975]

@@RichardGilmoreDronetech thanks! But which of the 4 switches? And in what position? The remote has A to D. Thanks again

[@RichardGilmoreDronetech]

@@h975 Mate. It all depends on the set up. This is something that you must configure yourself. There is no set switch. If You have the IFlight bundle, with controller etc. You need to connect to Betaflight and figure it out in the modes page. My controller is set up for my own personal setup and is not the same as IFlight. Although these quads are sold as BNF. they require set up.

[@h975]

@@RichardGilmoreDronetech thanks! Where I can read about it? So I must setup how to arm... Any other recommendation?

[@RichardGilmoreDronetech]

@@h975 github.com/betaflight/betaflight/releases And KZbin is your friend. Search Betaflight mode Set up.

[@LUCKY.CLIPZ1]

Great review, I went with the 6s version.

[@h975]

I do have the 6S also, just receive it. But I can't arm the drone, what's the sequence you use from the remote? Thanks!!

[@LUCKY.CLIPZ1]

@@h975 couldn't tell you! This is my first fpv drone and I'm still waiting on my dji system to come in the mail. I have a LOT to learn.

[@h975]

@@LUCKY.CLIPZ1 hi! Just receive mine. I'm also new. Let me know how it works for you!

[@bigtunitube]

Are you sure that is the Titan DC5? I believe that is the D5 only, no "Titan". The Titan has the DJI-unit in the middle . Look www.banggood.com/IFlight-TITAN-DC5-222mm-5Inch-Carbon-Fiber-Frame-Kit-Compitable-with-DJI-Air-Unit-For-FPV-Racing-p-1592897.html?akmClientCountry=DE&rmmds=cart_middle_products&cur_warehouse=CN