How to repair Termoscud (inflatable chamber)

[@jimbob4456]

Hey man, thanks for the video. Have developed the same issue on mine. Appreciate the time you took to produce this.

[@Igizeh]

Hey Jim! Glad you found this useful. But I consider buying updated chambers in future, they don’t have this issue with punctures, at least not so bad

[@jimbob4456]

@@Igizeh You have any ideas where I could purchase them in the States. I fixed them both with a vinyl repair kit, but one hole was on a seam. I’m not sure that will hold long. Thanks.

[@Igizeh]

@@jimbob4456 Tucano Urbano don’t have their stores in USA, so there 3 options I see: 1) drop a question to reseller which works with Tucano asking if they can bring tubes to you. I see that at least Vespa Portland shop have 2 positions selling in US 2) drop a message directly to Tucano Urbano support asking if they can send you tubes and how much will it cost (note: there are 3 tubes sizes (62, 72 or 82 cm), for R159 termoscud you will need 82 cm) 3) buy from Italian shop / european shop / eBay.it , most of them have international shipping

[@frankchersky9534]

Really helpful and a beautifully produced film!

[@quattroquinti8453]

Liels paldies, my man, thanks for taking your time and showing us this tutorial. I was worrying I would have to buy a new TermoScud or do a warranty claim 😅.

[@Igizeh]

Tucano Urbano offer stand-alone chambers and they have significantly improved quality, so after few patches of original one I suggest get updated version, they cost around 8-10€ per tube

[@zuzanastefankova4464]

thanks! exactly what I have been lookign for.

[@BurgmanChile]

good video my friend, thanks for sharing your experience.

[@Igizeh]

+Burgman Chile thanks Fernando! How is your trip planning? I haven't heard you for a long time on BUSA and KZbin.

[@pkpunch]

thank you.. couldnt find anything on their site!!! geez

[@borabora2082]

Thanks for great sharing

[@viktorhevesi]

Thank you!

[@kantivah]

Hello my friend. Thank you for the video. My thermoscud has a thick red twist element on the valve that does not fit the hole of the cover.So I cannot take out the bladder from the cover in order to find the hole. Do you know a fix for that problem?

[@Igizeh]

Hello! Yes, I have updated Termoscud now with red valve as you have. For me applying some force did the job. To be clear - red valve is not removable and force is applied to put this valve out of the hole of the cover. If the hole is too tight, you can carefully do a few mm cut of the black material around hole, this will allow you to remove chamber more easily

[@kantivah]

@@Igizeh thank you so much!!!

[@Igizeh]

@@kantivah hope this helps!

[@vencygomes4243]

Can you send me the link for the sticker what kind of sticker are you using

[@Igizeh]

Something like this: www.amazon.com/Inflatable-Self-Adhesive-Mattresses-Swimming-Translucence/dp/B08TBY86DX/ref=sr_1_11?keywords=inflatable%2Bmattress%2Brepair%2Bkit&qid=1647418991&sr=8-11&th=1

[@davlight971]

Mine is from the actual side...😢