IHC suspension turning radius

[@JamieBibb-s3e]

Alfonso Lodge

[@sicsol]

Rolling on this setup on my 2017 Silverado 2WD Single Cab W/T - Fantastic Kit

[@ihcsuspension2758]

Thanks Gary, appreciate your business!

[@kapa8835]

Hey I have a 14 single cab w/t what size tires do you run on your truck?

[@sicsol]

@@kapa8835 22x9

[@kapa8835]

@@sicsol tires

[@sicsol]

@@kapa8835 235/40/22

[@sharpoutdoors3368]

Nobody gonna mention the dog getting run over at 1:30 😂

[@DavidSanchez-el4bg]

It look like German shepherd

[@ernzto8940]

My singlecab nnbs squats when I turn it lock to lock and my turning radius isnt good. I cant do a U-turn and I bought them November, 2017

[@ihcsuspension2758]

We have revised our kit sir, our new kit turns lock to lock. Also you're overturning if your vehicle is squatting.

[@DavidSanchez-el4bg]

IHC Suspension I haven’t installed mines yet I’m running Texas edition stocks 22s with 285/40 /22 I don’t like spindles cause they don’t align I’m gonna use bottom arms ihc

[@Angelwaffels21]

On your 01 GMC Sierra 4/6 drop kit can you use belltech streetperformance shocks with it?

[@ihcsuspension2758]

Angel Rangel yes sir, although we use stock springs the belltech drop shocks will still bolt up

[@Angelwaffels21]

@@ihcsuspension2758 the travel of the stock spring won't be affected or anything from the drop arms?

[@jaluco02]

Good day to you Sir.. I purchased a set of upper control arms from you guys awhile back to help my alignment with a MaxTrac 4/6 drop I had and the arms worked great. I drive a 2014 Chevy Silverado Crew Cab 1500 RWD. How ever I’ve been wanting to add a 3” MotoFab level kit to it, and I’ve had to replace your guys upper arms with the stocks cuz the ball joint pinion doesn’t insert smoothly intro the stock spindles. The MaxTrac adjustable kit came with 2” lowering spindles and lowering coils so at the time when I used to run that fully dropped your upper arm ball joints to line up and bolt inserted properly into the aftermarket spindle. My question is can the ball joint pinion/bolt be replaced to fit into the stock spindles to achieve better alignment for that 3” level lift..??

[@Angel-ft8bv]

Did you drill out your spindle? Or read the instructions carefully

[@tonyy6.6]

With the 5/7 2014-2018 kit for Silverados do you need to get the 2 piece drive shaft? Crew cabs

[@ihcsuspension2758]

Recommended.

[@pablosolis3750]

Just bought ur kit a 4/6 for my 18 crew cab I’m I also going to need that Ivan thanks in advance

[@pablosolis3750]

Wanna say very satisfied with your kit well made 💯 IHC and then powder coated tsss thanks again keep up the good work btw really recommend this kit guys u won’t be disappointed

[@Angel-ft8bv]

@@pablosolis3750 do you bottom out easily

[@xxto_trill23xx58]

Finally an issue I’ve wanted to know. Thanks a lot.

[@ihcsuspension2758]

Yes sir, any questions or concerns don't hesitate to shoot over an email

[@oliwia5877]

Fvv

[@oliwia5877]

@@ihcsuspension2758 hej

[@davidcastillo8999]

I have a the same truck. With a 4/6 drop will I need a c notch??

[@ninorodriguez1547]

Do u have any drop kits for a 02 Chevy Silverado single cab 4\6 drop

[@Milliondollar_vibes]

I have cast factory control arms, and I have an IHC 4/6 kit for stamped factory control arms... Whats the deal with the ball joints? What can I do to make it work?

[@ihcsuspension2758]

You will need to get the upper balljoint. The k6136 will work for the cast. Just the upper and get rid of the cone sleeve for the bottom balljoint. That is for a stamed arms.

[@davidcastillo8999]

Good videos bro keep the videos coming..

[@ihcsuspension2758]

Thank you sir!

[@dee1642]

Can u do something on ur front end kit with the toe adjustment being max out

[@ihcsuspension2758]

Hello Daniel, our 09-18 ram kits we do narrow the track width 3/4" so tie rods must be cut to get toe adjustment. Any questions feel free to email [e-mail]

[@kapa8835]

What size tires are on this truck? I'm running 2019 ram wheels on my single cab 14 chevy 2wd. They have 275/55r20 tires on them now and I want to do a 4/6 drop like this. Wondering if those tires will fit.

[@equipto209]

Any plans for a 2019 Silverado lowering kit installation video?

[@Sosatimberland]

Do I have to grease the ball joints?

[@alonzovillarreal8379]

Where exactly is your shop located? Im from Palmview Tx

[@RFJersey]

Google

[@liftedmoonlight1692]

What Performance mods does this truck have ??it sound amazing

[@evelynjorge3382]

On this set up, would it mess up the drive shaft ??

[@ihcsuspension2758]

No sir, have any questions call us at 9564246901. We're available today till 6 pm!

[@evelynjorge3382]

@@ihcsuspension2758 thank you! I had a shop called big boy customs in fort worth tx Mansfield hwy order a kit from you guys today ,super exited for it to get here ! I have a 17 silverado

[@CASHOUTQUAN]

What drop is equipped on this truck?

[@josegonzalez-bk4cz]

did you have a kit for a 2019 silverado 4/6

[@caseydoty7048]

What cam is in that truck!?!?!

[@dannyg3445]

Can’t wait to take my denali to these guys and do it right!

[@rayg1217]

Oh so now “you will admit turning radius was an issue “ ? When I contacted you about that and the arms did not align, you said it was cuss my truck was wrecked before and just bullshited me , never resolved anything just took my money . & . No my truck was never wrecked , it aligned and turns like stock now with my djm kit

[@RFJersey]

So you had to get a whole new kit?

[@rayg1217]

Robert Fernandez yes new djm suspension kit

[@RFJersey]

Ray G How do you like it?

[@rayg1217]

No issues still rides like the 1st day I lowered it

[@MakoFadeShark]

@@rayg1217 Do you have any issues with getting camber aligned using DJM? I also have DJM 4/7 on my Silverado and im maxed out with neg camber.

[@frankm8533]

Yeah do more vids. Even if it's short

[@ihcsuspension2758]

That's the plan. We are car/truck guys never been into the video editing stuff. But we will be working on it more now.

[@locogtr6475]

@@ihcsuspension2758 *disappears again*

[@jayredkadi7833]

What is your turn around on replying to emails? Waiting on a response for my questions, thanks for this video though!

[@jasonboyd9458]

Dang mane that thang sound whats in that truck

[@Lalotx3]

Not the beard 😳

[@ihcsuspension2758]

NO more beard lol. Too hot in Texas

[@NKKUSTOMS]

Lately i had more then a few guys ask about this lol, truck im doing this weekend 2018 crew cab he ask me to make sure turning radius correct good to know i dont have to mod anything #NKKUSTOMS