Testing the Gate Pulsar HPA Engine

[@ridik1255]

I've actually really been looking into that engine and haven't found a good trustworthy review Soo thanks man

[@iiAnferny]

I'll do a more in- depth review soon. The only issue i've had is low air pressure. Although I fixed mine, it has been a problem to other people as well.

[@deadboi5541]

@@iiAnferny how could you fix it?

[@ekaliath]

What did u do to fix? Valve time ?

[@spiranomad]

I see a lot of potential with this in some custom builds i had in mind. That smaller form factor is exactly what I've been looking for, for some nerf shells I've been eyeing.

[@diogoflores4736]

Loved the video but i gotta say man, your room looks sick! Wished speedsoft had a bigger scene in my country for me to get into but ill still try to play. Keep up with the videos bro!

[@savage_juan707]

I made it in the video yo iianferny it’s me Juan 🤘

[@o_donn747]

The impression I got with the pulsar is that is uses the Titan 2 as the trigger unit and fcu. If that is the case how does the trigger sensitivity compare to the normal polarstar boards? Can you truly get a “hair trigger” with it?

[@iiAnferny]

Yes, its pretty easy to work on but might take a while depending on how sensitive you want your trigger. I'll definitely do a more in-depth review soon. For now, I'm just going crazy with the engine and settings for the next few weeks.

[@waterrr356]

3:51 bro got lit up right here 💀

[@dynasty_aatc]

I pre order one can’t wait for it

[@TheRealMuffin54]

How do you fix the problem you were talking about at 3:20? ive been having that happen with my jack

[@DLM.CHUNGUS]

omg I love airsoft

[@JJMoore]

Looks like you got it shooting good now. What setting did you find that worked best with that upper is that the 128mm CRBN ? All my CRBN builds that are 128 mm have been decent with .20 around 120psi

[@ollegoop9]

120 psi isnt that quite alot? what joule are u at, my f2 with a 247 barrel is shooting at 75 psi and 1,1j though its not a crbn and use outside in swedish fields

[@TheDustyBearCruiser]

Were you at the recent C tier tourney at sca? if so I didn't see you there

[@iiAnferny]

I wasn't there. I will be at the main tournament though

[@slavicblood5192]

How does it react with suppressor? Useful ones

[@2kLocus]

does the engine come with everything you need out of the box? other than tank and reg of course.

[@iiAnferny]

Yea, it comes with everything you need to start playing

[@bennisthemennis7464]

Some CRAZY hits here! Do you need a gate titan to have custom settings with it?

[@IamDylin]

The Gate Titan is included

[@Dougline_]

The engine works with P* or another FCU/Triggerboards? I want one due to the size, so I can put it in small 3D printed guns I'm developing, but I just hate Gate ETU systems and refuse to mess with these shits also the guns I'm making don't use M4 trigger control style.

[@2SlickDaniel]

What field is this and where is it at?

[@willcooper4651]

You mentioned in the video it takes a couple of shots to correctly cycle the air initially, how did you overcome this? As I'm having the same issue, if you don't shoot it for 10 mins or so the first few trigger pulls are a dud basically

[@djshyproductions]

Ah…. I thought I was the only one! My first game with my build was good. I let it sit for a game to run a pistol. So lapse time about 15 minutes… when I went to run the pulsar…the first few shots were duds….put put put. Then I’d have to wait a few seconds to shoot then it worked…. Then after I let it sit another game it did the opposite…. My first few shots were good..full velocity… then it slowly died out to duds… I thought it was my regulator but it was good and tight no leaks… then I thought the obvious, I ran out of air… but had plenty! So who knows…maybe I got lemon or I gotta mess with the settings… but when it did work…it was awesome!

[@willcooper4651]

@@djshyproductions I think mine must have been a leak somewhere, I just haven't identified where yet, as I ran it with the hose and then also with an ESG grip, and it behaved the same both times, always the first few shots were duds, so I've retightened everything again, and hoping it works better next time around. I love the FCU, I bought a second gate titan v2 for my polarstar jack as I just love the ability to connect my phone to it, and have so many more features

[@tukacustoms841]

lookin siiiiick brotha!! love it as alwayss

[@Dirty-clean]

is it quiet than the other engine?

[@Csm_Soy]

What setting do you run?

[@mikesanchez8859]

I’m on NorCal (Lodi). Are you selling any of your guns?

[@iiAnferny]

I do have 1 im selling. Message my IG. Its the same handle as my youtube.

[@nate5296]

Bro what’s ur barrel setup those shots looking crispy af

[@lavagod2op_yt969]

Where do you get your supreme bands of you mags???

[@bravo3058]

great vid, where did you get the supreme bands

[@arczeski53]

What you can tell about air consumption? And you don't have any problems with Maxx hop unit and Pulsar? Because I heard that it can have a mid cap syndrome.

[@francogonzalez8811]

hi , can u give me the name of the Gearbox for pulsar and carbon upper ? thanks :)

[@snipermonke8366]

Is the engine stock?

[@andyeee3496]

Hey bro can you tell me the gateTitan HPA setting?

[@JasonFolk07]

How is that gate pulsar? My polarstar is acting up and I'm thinking about pre ordering one to replace it... if I do gunna drop it in my krytac spr dmr build

[@odb.airsoft]

Guessing the pulsar is working great lol

[@BBruuuKIM]

Im thinking im gonna put one in my crbn, which hop chamber should i use for pulsar? Great video btw!!! Love it

[@LeagueCritic]

bruhh u gotta tell us what all u putting in that EVE. does pulsar fit in it!?!?

[@iiAnferny]

The KWA Eve or are you talking about another rifle?

[@LeagueCritic]

@@iiAnferny yea the kwa eve

[@LeagueCritic]

@@iiAnferny if pulsar fits in eve thats the first engine ive seen thats drop in ready for eves

[@SS-vd2dm]

What hopup u use?

[@elliottgregory9062]

Does it have to be hpa

[@camiisherechannel5989]

Nice Video 🎉. Where can I get the Supreme mag band

[@Cxhly]

Oh I finally caught up with your uploads

[@andyy1260]

How's the air efficiency on the engine ?

[@xxs1lentk1ller30]

0,7psi per shot on 450fps

[@Fitz5]

Do you know how this compares to a F2 with a Gorilla MFCU?

[@xxs1lentk1ller30]

Faster rof less accurate uses more air

[@Slow_content]

W vid could you show the eve 4 more it’s fine if you can’t tho💪

[@iiAnferny]

Next week 👀

[@Slow_content]

Thanks been wanting one for a bit

[@RegardedMith]

gang gang "edit. quali was still at 360" god dammit

[@iiAnferny]

😂 I finally got a new go pro Next weeks video is crisp

[@Mr_Scarz]

yes.

[@daltont1459]

Shirt looks awesome but at this point you might as well be playing paintball….. that’s a paintball gun lmao

[@AlgerLapitan]

Yessiirrrrrrr

[@specops_gbb]

Ayyy

[@bigdraco151]

i want rich ppl toys like u