This item can be purchased at the link below www.amazon.com/dp/B00OMAA85Q
Пікірлер: 116
@moth41284 жыл бұрын
I just built this. Here are my tips for anyone watching.. (Also, hello future me if you watching this video while trying to reassemble this monstrosity after having moved. Did Bernie win? I hope he did.) 1. Put in the little black magnets (from step 15) first. You will need a hammer to get them in there, preferably one that isn't metal (since they are magnets a metal hammer will yank them out). 2. In steps 1 and 2, make sure the metal rods are facing inwards. 3. In step 2, make sure the glass is the one that has the "1" printed on it. (Future Alice-- you marked this glass with a little bit of nail polish.). Otherwise the plastic strips will not fit the glass correctly. 4. Use gloves when handling the glass to avoid fingerprints Hope this helps some people!
@anidiotnamedbug89603 жыл бұрын
Alice Elliott Bernie can’t win :’)
@anabia70963 жыл бұрын
biden won
@robertoaldebaran7887 Жыл бұрын
The two plastic strip have to fit inside the channel on the wooden base toghether with the glass? Or they simply goes between the two glasses without enter the channel on the base? Thanks in advance
@reapy Жыл бұрын
Thank you. I had the non 1 door on the back and it was a nightmare I was about to give up on ever getting it together, saw your comment and checked and whoops, put the right one on and it was now a breeze to get together.
@rebeccamartinez9429 Жыл бұрын
I cant close it properly because i could not get the magnets in. Honestly the instructions were very stupid. They should have listed it first
@lachainedegurt38136 жыл бұрын
Cool! Now I want the Detolf Disassembly...
@3r8mo5 жыл бұрын
Very helpful, the video was much more simple to follow then the included instructions.
@somebody133245 жыл бұрын
Thank you so much man this was helpful. I just finished assembling mine with my parents it looks gorgeous
@Gray_Fox_Coaster4 жыл бұрын
Bought and assembled yesterday in black color. It tooks me 2h00, all alone. I drilled a little hole in the center on the down part, to pass an electric cable, for the light of my Lego Saturn V boosters. The glass looks like fragile. Good product for CHF 89,-
@carlmiranda98523 жыл бұрын
I am looking for this 😂 Installing a Lock for my Ikea glass cabinet. Thank you 🙏👍
@gunslin33able2 жыл бұрын
Thank God I just brought mines today for my collection yr video very helpful only question I have for the hole on top too to the wire threw did it with hole already or did u have to drill a hole for it ????
@toxiconflict4 жыл бұрын
this just happened to me the other day. Went back and thankfully they replaced the part I needed.
@mikeking18705 жыл бұрын
You forgot the part where the glass explodes just sitting there
@fgcapps724 жыл бұрын
Mike King my wife was placing the glass in the groove as instructed and “pop!!” went the glass all over the living room
@blood8520004 жыл бұрын
Wtf
@sparkadventures28044 жыл бұрын
Can you guys really confirm of this because I have been wanting to get these now and all a keep hearing is this same comment
@Alternativezz4 жыл бұрын
spark Adventures omg me too i want to get this but im so scared of it breaking
@sparkadventures28044 жыл бұрын
@@Alternativezz I got to see them in person at ikea It seems sturdy But the comment scare me I also have little ones That's what keep me from getting
@NukaColaWarrior84347 жыл бұрын
do you need to take it apart in order to move it Around or is it pretty sturdy? thnx :)
@CCJ8796 жыл бұрын
This helped m,e so much. I was an idiot, and I locked the upper most part as tight as I could before I installed the door. For some reason, the metal hinges that the door is attached to was too tight on mine, so my I was unable to slid the top part of the door into the metal hinges. however, I saw how you guys actually unscrewed the upper most part of the case (wooden part) to allow more leeway for the top part of the glass door. Basically, you guys saved me alot of headache as I was at a loss, and was even on the verge of just giving up and setting for the unaligned glass door
@Rajivrocks-Ltd.5 жыл бұрын
I bought one a few days ago, but my door is misalligned for like a few millimeters. i don't really understand what you meant. i know its an old comment but if you can remember maybe you could clarify?
@governmentrape6 жыл бұрын
had to mute it..
@lilr3x832 жыл бұрын
do those tools come with it?? (the little things u used to twist the scrrews on
@thedoctor74929 ай бұрын
great video, thanks for sharing! Could you tell me where to get the lock?
@techguypw7 жыл бұрын
pain in the ass to do it alone but its real nice when is done.
@r.i.p.gaming43514 жыл бұрын
much better if you wear gloves (to avoid finger prints) on this one, and yea another person to help you assemble it will make it a lot easier. 😉
@izunauchiha78035 жыл бұрын
I buy one but the part where you put the glasses the metal came out damaged the screw does not fit which one does not tighten, you will not know where to get that part?
@everardosalazar55114 жыл бұрын
Put mine together but door is snug at the bottom and the two glass shelfs doesn’t sit even on the rack but the top shelf does. Any ideas on how to fix it?
@reallyreal60236 жыл бұрын
I just put a coaster curio cabinet 950171 black together. With no aa bb cc. No real information. So Thank you for this video. I was able to. By myself. 😱 Lol 1 washer missing. Lol.
@ARFF1Tampa5 жыл бұрын
Those long plastic guides are the only problem on every assembly. Getting the second piece all the way in. Especially when the spaces are almost closed (as they have been on some I've received)
@rebekahwildman70913 жыл бұрын
How did you fix that problem as on side fine but the other side is horrible and I can get the glass into the plastic guide
@hartonowijaya136 Жыл бұрын
How thick is the glass that there are 3 pieces in mm? 4 or 5mm
@lougaming13546 жыл бұрын
thank you!
@wanessasilva45417 жыл бұрын
What's the size of the wooden base and the diameter of the screws? (in centimeters) . I just know the glass mesures.
@stevedudu1582 Жыл бұрын
Cefrank's lamp will bring even more excitement.
@xxondalalalaxx4 жыл бұрын
I just built mine and I notice that the right side bends inward, is that normal ?
@AD-hj6qf2 ай бұрын
Where can I buy that lock?
@alexandragomez54534 жыл бұрын
Thank you sooo much
@steveOHH26 Жыл бұрын
I took me 2-3hrs to put together by myself and i only got as far as getting the top on nothing is lining up right so now i have to take it apart and im afraid im going to break it now
@t.c.87967 жыл бұрын
can you please help me? bought a Detolf yesterday... after assembling it I've noticed something ain't right... the door won't shut completely, the bottom is okay (magnet at the bottom is definitely doing its job) but the top isn't. Tried losing the screws at the top thinking that it might be to tight that it makes the glass "warp" but nothing changes...
@moniqueedgecombe30943 жыл бұрын
Hi T.C. I know this post was 4 years ago but did you ever find a solution? I'm having the exact problem and I don't want to go through the hassle of returning the cabinet.
@DeeTee792 жыл бұрын
I made the same mistake, put both hinges on the door, then I realized it would be easier to keep the top on and slide the door on with the top hinge installed.
@JRock88997 жыл бұрын
Better off buying wireless puck lights. Battery operated with controller. Check Hoover puck lights on eBay. I have the, set in 3 cases. There great and have 3 diff colors in one light. Clear blue red or green. $30 for 5 puck lights
@fredbrooks75295 жыл бұрын
I agree, that's what i'm getting for my detolfs. I got a friend who has lights with wires in his detolfs, the lights look good but I don't like all those wires. The wireless puck lights will do just fine for me.
@Roxass005 жыл бұрын
wayyyyy better looking than this video. Those wires are ugly
@hidayatmanja60344 жыл бұрын
Where to got the lock? Somebody help me.
@samanthas3977 жыл бұрын
That music tho 😂😂😂😂
@SpoopyKatt Жыл бұрын
I am going to be building four of these soon -_- Wish me luck.
@retrofannes12136 жыл бұрын
Somebody know if glass is 3mm o 6mm?
@matthewlugo24173 жыл бұрын
My door isnt magntizing, it because i have the hinged alil to low? Or the fact that i pushed the magnet all the way in?
@sofa_kingcool9853 жыл бұрын
Flip the magnet around
@JamesJones-ou6bs5 жыл бұрын
Where did you get the lock from... couldn't really see how the lock works
@daf51626 жыл бұрын
In the likely someone that own one has to move, can they be disassemble or they have to be move at its current state fully assembled?
@SandyLoving6 жыл бұрын
They can disassemble we bought one second hand
@elwingy7 жыл бұрын
is it possible to combine to of these next to each other by removing the glasses in between them so as to fit larger items?
@kanekiskywalker15962 жыл бұрын
I guess not and its such a bad idea cause pf the weight, might just break the glass
@nickmimie4994 Жыл бұрын
Thanks 😊
@johnband35 жыл бұрын
Awesome.
@annievarghese42815 жыл бұрын
How much price ?
@brandonscott11035 жыл бұрын
Haha i dont mind music.. Reminds me of Bubba Ho tep
@anja171005 жыл бұрын
can someone tell me how to put these glasses sides into these plastic slots? it's impossible, especially when sides are in vertical position
@buybye28375 жыл бұрын
You have tilt the bottom front first and then work your way into the plastic inserts...bottom to top...I know its 4 months later but yeah...
@therage8004 жыл бұрын
@@buybye2837 And now it's 10 months later lol but I just wanted to say thanks for answering that. I just got mine and watched this beforehand (Havent even started yet) but I can keep your comment in mind. Never hurts to answer an internet question because it might help someone else.
@khorosu5 жыл бұрын
2:45 starts to asembly with 2 long unions of plastic, those dont come with the boxes... what can I do?
@Katie-rq8iq3 жыл бұрын
I just opened mine and it came with them
@Katie-rq8iq3 жыл бұрын
Go to ikea and ask
@punmaster22714 жыл бұрын
Is it easy to move or disassemble and re-assemble a DETOLF?
@bluntendo2 жыл бұрын
Yes
@peterroberts45093 жыл бұрын
It doesn't help when four of the caster screws are missing
@alextremo66613 жыл бұрын
Fuuuuuk mine came without those 4 screws too ! What did you do to fix the problem if I may ask ?
@acupofteabagyoutube95404 жыл бұрын
One of the glass pieces was broken, the other completely destroyed :D
@JoeGoldberg19917 жыл бұрын
Does it come with a lock? Or do i afto buy one separately.
@artenman7 жыл бұрын
Do you speak English?
@chadbankston83716 жыл бұрын
SSGSS Nathan separately
@Amariellah3 жыл бұрын
does the box fit into the trunk of an suv
@annie19113 жыл бұрын
i dont think it will fit in any trunk, it will have to be sprread across the front and back seats
@JaneDoe420112 жыл бұрын
Mine fit in a Honda Civic if that helps. Of course I had to put the backseat down, but it fit so it HAS to fit in an SUV.
@elronman5 жыл бұрын
Ohhhhhhhh i only got half the kit.
@peterroberts45093 жыл бұрын
God must laugh his head off when he sees someone like me trying to assemble something like this. I suppose he has to get his kicks somehow.
@ryanmair70073 жыл бұрын
who?
@unorthdoxcleric69537 жыл бұрын
this would be good if it wasn't for that music, damm.
@cadecu5 жыл бұрын
Mute and play something else in the background.
@outlet69892 жыл бұрын
This should be added to the title, With a Little Help From My Friend. When parts seem to be tough to install, I use some hand soap. You must be a great DIYer. I did not see the assembly instructions. When I did mine, I installed the door when I put the top on. Used masking tape to hold it in place. For lights, I bought some under-counter lights from HomeLife LED. Twenty units for $200. They attach with self-adhesive backing and can be removed. They are also motion-sensitive, so they come on when you get near the display case. No ugly electric cords to hide. Also, if you are going to place it near a wall, install the wall anchors.
@tommychong31674 жыл бұрын
Same here, install with same way, but glass exploded itself, it might kill a lot people
@proudthai56256 жыл бұрын
very nice . look easy . l know it is not .
@FireBomberBassist3 жыл бұрын
Never buy from Amazon unless you absolutely must. If you can drive out to Ikea do it. I picked up 4 for the price of 1 on Amazon at Ikea. Lol
@menzee0609 Жыл бұрын
getting the glass in those freaking plastic things is a nightmare. Had to stop what I was doing and reasses if I want to proceed or return it. Worst piece to ever assemble from IKEA
@kevinc23172 жыл бұрын
Single hardest thing I have ever done
@lucyrector29047 жыл бұрын
👍
@yvetteleak93343 жыл бұрын
This thing gave us the flux. Geeeesh!!!
@kanekiskywalker15962 жыл бұрын
Mine didn’t have the hole for the cable on the glass… my hottoys will belong in the dark for eternity
@chaseedwards50606 жыл бұрын
TOOK ME 2 hours if you got the money pay 2 people to do it
@jellowpy92435 жыл бұрын
Super easy to install with a little bit of help from a friend first one takes a lot of time but after the first one itll take around 10-15mins for the succeeding pieces. Built 6 for my display collection
@garageofhorror5068 Жыл бұрын
Sucks two person job when it comes to sliding the glass down into those stupid plastic sidings
@beans_avi93823 жыл бұрын
Anyone here for hamsters lol
@rizwanahmed114 жыл бұрын
The first step should be to create holes for the light. and install the light base plate. Poor instructions that does not show the perspective as to where are you installing what item. First show where is the item is going to go then show the closeup.
@teosantiago21025 жыл бұрын
I cant trust people that dont show thier faces
@MintyMiku3 жыл бұрын
Mine exploded
@victorc4_12342 жыл бұрын
Anyone else here for their gerbils?? No? Just me? Oh ok
@memetrashhh89364 жыл бұрын
Yo quiero esto para mi hamster 😿
@tylerwoodland99504 жыл бұрын
thanks for explaining literally nothing was no help whatsoever pulls out random screws and screws it into another screw??? wtf
@JaneDoe420112 жыл бұрын
I'm revoking your man-card. I'm a 56 year old woman who assembled it by myself.
@ishington2 жыл бұрын
I will never buy another piece of crap from Ikea as long as I live and breath.
@SagnolTheGangster4 жыл бұрын
This is the most bullshit ikea furniture i have assembled... So difficult to put the sides. Looks cool but this took me about 3 hours...