IKEA MICKE Desk / MICKE assembly

IKEA MICKE Desk / MICKE assembly
How to assemble Ikea MICKE desk detailed instructions should be an easy one to put together.
amzn.to/3Ls9VLV
If you like this video don't forget to subscribe.
/ @mrtechmech
Thanks for watching

[@adrugname7290]

Thank you so much! My fiancé and I got 2 of these as a early wedding present and setting up was a breeze with this guide! My fiancé and I thank you!

[@pinkowbs]

I opened the entire box and now I'm sitting in my couch thinking why didn't I just hire a handyman so thanks for this video...too bad I don't have the necessary tools.

[@OGFRANKIESAX]

I’m ready to hire one now ! Taking too long

[@pinkowbs]

@@OGFRANKIESAX do it!!!!!

[@HomeKeepingChannel]

Thank you for actually showing how to get the drawers in. Spent hours trying last night and your video had them in within minutes.

[@MsElsaMariex3]

I still can't get my draws in and this is the second video I've watched idk what I'm doing wrong ?! I dbl checked to make sure everything was correct and it looks like it I honestly dk can you help maybe there's something I'm missing

[@neerajojha1428]

To be very honest their assembly catalogue was so confusing. You made my life easier :) Thank you so much..!!

[@MrTechMech]

😊😊

[@samanthataylor3866]

Thank God for KZbin tutorials 🙏🏿🙏🏿🙏🏿

[@gigie1308]

THANK YOU omg the ikea paper instructions are so difficult to follow. Your video make it 100x easier to assemble the desk !

[@MrTechMech]

Thank you so much Gigi for your comment 😊

[@cshollyoaks1276]

OMG I’ve just bought this yesterday and didn’t have a clue on the instructions, I found this and watched and done it by myself I’m so proud of my self loll and it’s because of this video, thank you so much, I can’t thank u enough !!!

[@MrTechMech]

Thank you so much for watching and your comment CShollyoakS 💐👍

[@evesdropping3437]

Is this sturdy?

[@fariarif]

Tysm this helped so much I spent 5hours w my girls but we were confused watched yr vid and did it in 10min thanks again!

[@srinathradhakrishnan8287]

The packers forgot to send me the catalogue and I didn’t want to refer to a pdf and mess up the assembly. Your video really helped me assemble perfectly. Clean and thorough step by step process 👌 very well done!

[@MrTechMech]

Thank you so much Srinath Srk for your comment and I’m so glad that it helped you,💐🙏

[@dennisBijuuX2]

Ohne das Video hätte ich nicht gewusst wie man die Schubladen reinschiebt # Danke dafür 🤗 !!!

[@MrTechMech]

Gerne 😊🙏🏻

[@samuelukoha9354]

Thank you so much for this video. I just finished using it to assemble my table.

[@liea713]

Only came on here because I took my drawer out and didn’t know how to put it back in! I didn’t know it was this simple thank you!

[@MrTechMech]

Glad this video helped you ☺️

[@MatthewAGilbert]

Thank you! Got all the way to the end and putting in the drawers had me stumped. Your video saved the day!

[@revisdavis6380]

How’d you get the drawers in ?!??

[@MatthewAGilbert]

@@revisdavis6380 I don't recall at this point; my wife somehow figured it out. It's tricky.

[@brianap189]

I was about to give up and pay for my desk to be built by someone else, then I came across thissss !!! ☺️ thank you

[@MrTechMech]

Thanks for your comment Briana👍

[@rupanshichawda5320]

@@MrTechMech I have one extra pair of metal supporters that go below the drawer across the middle vertically. The manual has instructions but there aren't any holes in the drawer where the manual asks us to put the screw. I have no idea what to do now. Any suggestions?

[@mrstarfish]

Thank you 🙏 This was my saviour, desk lookin clean

[@Sha306Sha]

So glad I saw this video!!! Thank you so much!!! I stopped and watched it as I put it together. You are the best!!!

[@MrTechMech]

Thank you so much for your comment

[@liaturcios9985]

Thank you for this video! You saved my assembling task!

[@osamaahmad5152]

i finished the same desk you did it really helped me thank you i was able to save 150 dollars from this vid

[@MrTechMech]

Thank you so much for watching and your comment🙏💐

[@mrbeats343]

Can't thank you enough for your your tutorial? Thank you so much 💓

[@MrTechMech]

Thank you so much for watching and your support Mohamed Ahmed 🙏

[@juliawilson9122]

Thank you so much for this video! It made putting this desk together 100 times easier 😌

[@MrTechMech]

Thank you so much Julia for watching and your comment,🙏

[@maquevsoria8563]

Nice video, was really easy , thank you

[@Filmed.by.Peace.]

Thank you so much my desk is coming in a few days and I am really worried that I won’t be able to finish making it . You make it look easy so thank for this vid!

[@goldenwind5681]

Rolling the shelves in , I only was able to do it cuz of your video thanks

[@MrTechMech]

Appreciate it 😉

[@sanketsarang8137]

Thank you for the video! It really helped.

[@bigboyshenoy9921]

I love you so much dude you have no idea how much this has helped me thanks so much🙏🙏

[@Saminspire]

This video is so satisfying to watch, and super informative. Thank you for making this!!

[@MrTechMech]

Thank you so much for watching Saminspire🙏💐

[@ladygaia4782]

Eyy thank u so much!!!! I have assembled it thanks to u!

[@nadasahraoui8241]

Thankyou so much for this video! Helped me alot!!

[@carlosc30]

I will use this tomorrow for when i build my new desk! we’ll see how it turns out

[@yepierso87]

Thank you! This video saved me!

[@MrTechMech]

Thank you so much for watching and subscribe Riss 💐

[@khoshiabdullah9651]

Thanks very much 🙏🙏

[@oge_mike]

10/10 great video you helped me out a lot🙏🙏🙏

[@damon323]

Saved my life man! Lol! Thank you!

[@MrTechMech]

Thank you for your comment damon 👍

[@mdyasin4754]

Beautiful

Thank you very much for posting this video. It helped me and my mother in law to assemble up by ourselves. Very helpful and well instructed.

[@morafi9448]

Cheers for sharing this 👍.

[@blackberry-semenretention6787]

Thank you 🌹

[@TheAstral]

Thanks, really helped!!

[@MrTechMech]

Thank you so much for watching, 💐

[@adwoaansah9047]

Thank you so much

[@0220xiv]

this is so helpful, thank you so much!!

[@MrTechMech]

Thank you so much for watching and subscribe dana🙏

[@tibbevercammen1533]

This helped me out thanks

[@MrTechMech]

Thank you so much for watching tibbe👍

[@AchiniKaravita]

So helpful. Thank you

[@oscarinfante4788]

This help me much. Thank you for putting so much effort in it.

[@Kamline-yo4zi]

🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏❤️❤️❤️❤️❤️

[@Tamara-pc8gq]

I cant put the drawers in… it doesn’t work

[@teganward8375]

my draws sit too low and even if i put them on a 45 degree angle they still sit low and when i pull them out they fall

[@varunananddudeja3513]

helped me a lot. thank you so much. do you know how to deal with its wobbling, it wobbles on side ways.

[@varunananddudeja3513]

can you help with the wobbling?

[@MrTechMech]

Thank for watching,Unfortunately the table legs are weak .

[@teatimewithyaya]

Hey, looking to buy this one and wondering if it's sturdy enough.. could you perhaps help me with how the function/quality is and if you've faced any challenges in using the table so far? Thanks much! ✨

[@MrTechMech]

Hi,actually it has been so far good .The quality of the color is a little bit low but it’s worth the price

[@CuriousOne353]

This is helpful - I'm trying to take off just the middle part between the drawers, as i don't want the drawers anymore. Is this possible to do without taking the whole top bit off?

[@MrTechMech]

Thank you so much Kristyna for your comment, Yes, that’s possible and good idea 👍

[@CuriousOne353]

@@MrTechMech thanks! It feels very stuck even though I've loosened all the silver notches. Any tips?

[@Idontcaree]

Good job 🌷

[@MrTechMech]

Thank you so much

[@ewwkyy]

this helped me so much bc this is my first time building something like this tysm!!

[@ProudShipperVII]

I have the shorter desk with the cupboard on the side, I have assembled it successfully except for one thing. The drawers are crooked. They go in and out no problem, but the face at the front isn't level on either of my two drawers, and it's not good for my OCD. Any suggestions for adjustment?

[@MrTechMech]

Unfortunately, I also had this problem, The only solution is to use high quality rails.

[@mayayousef226]

Thank u sssm

[@MrTechMech]

Thank you so much for watching Maya.

[@Mitisuri]

Thank u

[@MrTechMech]

Thank you so much Mitsuri for watching 🙏

[@9S6OFFICIAL]

QUESTION: if I don’t want to use the drawers, can I still manage to build the desk without that center thing that separates actually the drawers?

[@MrTechMech]

Yes, you can do it 9S6, And good idea 👍

[@9S6OFFICIAL]

@@MrTechMech i was asking because I tested the desk at IKEA, but with the drawers it become too low for my legs 😂😂😂 but without them would be actually perfect

[@MrTechMech]

That’s right 😁

[@hyfonia]

Thanks a bunch 😉

[@MrTechMech]

Thank you so much for watching.

[@hyfonia]

@@MrTechMech you're welcome

[@staridise]

when building this desk is it possible to decide which side piece (open or solid) goes on the left or the right? id to have the open side against a wall to the left but online its displayed on the right, wanted to check before i buy it!

[@bawajeee]

You were helpful but at 5:58 you should've informed the audience to use the big screw locks.

[@MrTechMech]

Thank you so much for watching and your comment, you’re right Shezad 👍

[@aleks18293]

I plan on getting this desk for my home office it looks so nice, I will save this video for the assembly, it will help me a lot! Thanks for sharing, if you can, can you share your thoughts on it? Also, is the material like mate, shiny, I couldn't get that one, as in different pictures it looks different.

[@MrTechMech]

Thank you Alex, It is good compared to the price of and its color is matte white.

[@aleks18293]

@@MrTechMech Thank you! :)

[@LalarukhMansoor]

I have this desk for my home office and I love it!

[@ayshab8983]

Is it fine if we don’t attach its drawers? I mean will it’s stability would get affected? Just to have more leg space I was wondering if I could just put the sleek table and not it’s drawers.

[@MrTechMech]

Yes, no problem!

[@ayshab8983]

@@MrTechMech thanks for replying and guidance

[@mdyasin4754]

Nice 😍

[@JakeLondonRivers]

So frustrating, instructions in the book are not clear enough, I put the bottom of the drawer in upside down and I think it's impossible to turn it around without stripping the white translucent pieces

[@bray.-]

Ok I don't know if I've done something rong and I'll update if I did but holy crap I've sat on it bounced on it used everything and the last piece will not go down and I legit have no idea what to do.. welp update um the screw things where to tight and wouldn't let it go down still stuck on one tho

[@MrTechMech]

Carefully check the video again, Another people have done the same, You can definitely do it,

[@revisdavis6380]

Am I really the only one who can’t get these drawers to insert properly

[@imSubhamm]

hey can I mount a dual monitor Vesa adapter on this desk ? thanks for the video....

[@MrTechMech]

you're welcome, yes you can it.

[@razrchalln]

Hi i'm planning to buy logitech g steering wheel , will I able to mount on this table

[@soepyyy]

is it possible to mount a monitor with a clamp and take off the back wall? thank u!

[@MrTechMech]

Yes, No problem, You’re welcome 🌹

[@rupanshichawda5320]

@Mr Tech Mech I have one extra pair of metal supporters that go below the drawer across the middle vertically. The manual has instructions but there aren't any holes in the drawer where the manual asks us to put the screw. I have no idea what to do now. Any suggestions?

[@MrTechMech]

Thanks for your Comment, Unfortunately no!

[@migom6]

Same issue

[@sophiec.8044]

what kind of screw drivers did you need?

[@MrTechMech]

Hi sophie, Just a slotted,

[@hatiic]

👍👍👍👍👍

[@nithinmenezes7584]

How much weight can this desk carry, will I be able to keep my gaming PC on top of it ?

[@MrTechMech]

I think about 30 kg!

[@nithinmenezes7584]

Thanks. Very Informative Subscribed!

[@hbxuer]

No matter how hard i try i cant put the drawers in.. when it slides in the the rail it sits low from the desk.. and i can’t get the white wheel above the gray one… only inside the rail

[@MrTechMech]

First 45 degrees down and then in!

[@pinkowbs]

I have the same issue...managed to get one in and it's stuck.

[@kuroshomecafe1807]

is it possible to disassemble the central piece?

[@MrTechMech]

I think it’s not possible!

[@kuroshomecafe1807]

@@MrTechMech too bad i already ripped it apart ahahhaa

[@moniyat]

Is it normal that I have one 103430 lock screw left?

[@MrTechMech]

Unfortunately I do not know exactly, I think it's inside the manual,

[@ukrabbits7719]

Is it possible to reassemble this desk to switch the sides? I want the open side on the right side.

[@MrTechMech]

Yes, If done carefully and slowly!

[@olivia-hd9kn]

damn my back hurts lol

[@kawagunpla]

Does is sag over time?

[@MrTechMech]

By using heavy equipment on it yes

[@aztec2k781]

Is it sturdy enough for a pc settup

[@MrTechMech]

Its width is a little small!

[@LalarukhMansoor]

Can you share which chair goes best with this desk?

[@MrTechMech]

Bleckberget ikea chair, assembly video about this chair is in MrTechMech KZbin channel!

[@LalarukhMansoor]

Great! Thank you!

[@mwcsll]

is the micke add on unit compatible with this desk?

[@MrTechMech]

I think it is on the ikea website,

[@minminhuang5685]

How's the price?

[@MrTechMech]

120 €

[@manthanb777]

Can I mount dual monitor stand on it?? 🙂 And mic boom arm?

[@MrTechMech]

Yes, you can do it.👍

[@soepyyy]

@@MrTechMech isnt the back the big to add a clamp though?

[@user-ct1lf3hf1v]

Did they provide the screwdriver?

[@MrTechMech]

No٫ Unfortunately

[@GaneshSingh1]

Do they send this screw driver or I need to buy ?

[@MrTechMech]

You need to buy, Good luck,

[@notquangbui]

does the box come with tools?

[@MrTechMech]

Unfortunately no!

[@emanuraif1370]

How do i take of those drawers?

[@MrTechMech]

in Ikea website ,

[@DarthVader964]

Does anyone know the weight limit for the desk?

[@MrTechMech]

I think about 20 kg!

[@DarthVader964]

@@MrTechMech I can't find the weight limit anywhere online. My tv is 19.91 kg and want to know if I can put it on the desk. Is the 20kg limit a guess or fact? Thank you

[@Its.Mia.Amelia]

Was this the 55inch table?

[@MrTechMech]

142x50 cm

[@Liana-cp5cp]

I cannot get the two giant pieces to align at about 6:50 no matter how hard I try. Everything aligns except for 1 screw that I just can’t seem to get no matter how many times I unscrew and rescrew it trying to make it fit with the hole on the long piece. Any advice? Should I just go without the screw?

[@MrTechMech]

All screws must be exactly vertical. Get help from someone else for this part. By opening the screws again, the screw seat may be damaged!

[@HomeKeepingChannel]

I had the same issue but went ahead without it as the remaining area’s were secure. The IKEA engineers are very smart with their designs, just ensure everything is securely together

[@blessed997]

💪😎👍 💪😎👍💪😎👍

[@Glittergirl-fb7cf]

How long did the desk take to make?

[@MrTechMech]

About 2 to 3 hours

[@HarshSingh-mw2fp]

Is the desk strong?

[@MrTechMech]

not completely!

[@ianchoy5236]

4:16… tf ?

[@MrTechMech]

We have two different size!

[@PadenSucksToes]

How much weight can the desk hold all together and how much weight can the drawers hold?

[@MrTechMech]

I think about 25 kg!

[@mdyasin4754]

Beautiful