IKEA PAX WARDROBE Sliding doors assembly (Part 1)

[@ericsvensson2475]

Dont usually write comments. But I want to thank you for the time it took for you to make this video. It really helped us, and saved me and the missus from killing each other. Take care

[@PPFlatPack]

Thank you for watching and avoiding divorce;)

[@MrWLJ71]

Thank you for taking the time to share. One tip I may add is to use clamps to align the units so that when you put the connecting bolts together, everything remains aligned and does not move

[@mrreeree3633]

When the rail is secured to the top of the wardrobe with the 2 long screws @5:19 are there pre drilled holes?

[@cecinestpasunjames]

Thank you so much! I have almost never commented on anything ever before, but if it wasn't for this video I would have destroyed my closet and started an Ikea boycot !

[@PPFlatPack]

Thank you for watching ;)

[@grahamoneill8506]

Watched your series on the Pax wardrobe and sliding doors - without your video it would have been impossible. Thank you for the help

[@PPFlatPack]

Thank you for watching

[@jordifemenia]

I am not sure what I would have done if I had not found your videos... IKEA instructions too basic... your videos and the level of detail... is excellent, thanks!

[@PPFlatPack]

Latest 2021updated version of these Ikea sliding doors :Ikea AULI sliding door frame assembly for Ikea Pax wardrobes Part:1 kzbin.info/www/bejne/iGWcapdjeKd3sM0. Thank you for watching

[@FelipeCerdaBarra]

Thank you! This is so much better than looking at the not so clear IKEA instructions.

[@PPFlatPack]

Thank you for watching ;)

[@Chantal1111]

I used your videos to assemble my sliding doors. Didn't understand the manual, thank you!

[@PPFlatPack]

Thank you for watching

[@TN_AU]

Your going to me my savour! I put together the PAX wardrobe with all the inserts and pull out drawers. The Sliding door is my last step, I got as far as putting on the top and bottom rails, I had a quick look at the remaining steps, oh my, so I call it quits for the night, your part 2/3 video will surely help me with the rest of the way. So this weekend I will be attempting the rest of the sliding door install. Like others, thanks a million!

[@PPFlatPack]

Here is the latest updated version for this Ikea sliding doors kzbin.info/www/bejne/iGWcapdjeKd3sM0

[@PPFlatPack]

Thank you for watching

[@TN_AU]

@@PPFlatPack great, thanks for that!

[@stevenly5185]

Thank you very much, can’t install my pax wardrobe without your video, very clear and helpful save me 400$ for handyman install it. Thank you very much.

[@Vismajor01]

400$ wtf dude, not event he wardrobe cost that much

[@laurenwilliams7484]

I have a pax that I had to take apart and move. This video and Part 3 were super helpful in making sure I reassembled it properly! Thanks so very much for creating these videos and taking the time to show all the angles and what could potentially go wrong! I think my pax may be assembled better now than ever before!

[@PPFlatPack]

Thank you for watching ;)

[@roystongale7975]

Really good series of videos When I opened up that sliding door box I almost immediately wanted to package it back up and take it back to IKEA but I got through it with a little KZbin help.

[@PPFlatPack]

Thank you for watching

[@motngaymuahe]

Absolutely brilliant video! I followed your instructions instead of the manual came with PAX and I found it's so much easier, especially when installing the sliding doors.

[@PPFlatPack]

Thank you for watching

[@clivetring6128]

Thank you for your amazing series of videos for assembly of PAX wardrobes with Hasvik sliding doors. I found them so useful when I assembled these products, I honestly doubt I would have succeeded with just the IKEA instruction books.

[@anicesuprise1459]

I've had this wardrobe 4 years no doors 🥲lol Mt nan has passed who bought it and I'm determined to fit it properly.after first buying it I was told it was faulty by Ikea but now I have all the bits.cant wait to have a go lol x

[@mylescheetham2614]

Iv come back to this video a few times with my wardrobe life saver thank you 🙏

[@PPFlatPack]

Thank you for watching

[@SMG043]

Thank you very much. Very helpful video

[@PPFlatPack]

Thank you for watching

[@jo061050]

This video is a great help. Watch. Pause. Copy. Repeat.

[@livingonthetyne]

This looked way confusing in the manual but you just made me look like a boss 😅😂 thank you for a great guide

[@gavancastle3830]

Bloody legend! Would have been lost without you, now onto part 2

[@PPFlatPack]

Latest 2021updated version of these Ikea sliding doors :Ikea AULI sliding door frame assembly for Ikea Pax wardrobes Part:1 kzbin.info/www/bejne/iGWcapdjeKd3sM0

[@nikolagrkov9672]

Thankyou very much! Very good recommendations! I assembled 3 of my Ikea wardrobes. No problem at all. Thank you for posting!

[@PPFlatPack]

Thank you for watching

[@MrTractrac]

The best man ever on you tube very details did follow your instructions step by step did my wardrobe for the first time let God bless you soooo much 🙏🏽🙏🏽🙏🏽🙏🏽

[@PPFlatPack]

Thank you for watching ;)

[@arunrao2898]

Fantastic video and very helpful. This series made it so much easier for me to get it right. Really appreciate your work!

[@redguard65]

Your videos are amazing!!! So much detail and different camera angles. Great work 👏

[@PPFlatPack]

Děkuji za sledování. Not often people appreciate how much work going into this videos. Thank you. There is Latest 2021updated version of these Ikea sliding doors : Ikea AULI sliding door frame assembly for Ikea Pax wardrobes Part:1 kzbin.info/www/bejne/iGWcapdjeKd3sM0

[@zee4782]

SAVED OUR LIVES THANK YOU ❤

[@alyssaferree1474]

These are so helpful. We are putting back together a pax that we took apart last spring when we moved and because we bought it a decade ago didn’t have the instructions. Thank you! We had no idea what the bag of random plastic pieces were for lol

[@kieradhez]

Thank you, your video is easy to follow and helpful the instruction was so confusing

[@PPFlatPack]

Thank you for watching

[@Anni1208ka]

Thank you very much for this video!

[@PPFlatPack]

Here is latest updated version of this Ikea sliding doors assembly kzbin.info/www/bejne/iGWcapdjeKd3sM0

[@chuzzwade288]

Very helpful. Thank you. And thanks Ikea for not supplying instructions!

[@PPFlatPack]

Here is latest 2021updated version of these Ikea sliding doors @ thank you for watching. kzbin.info/www/bejne/iGWcapdjeKd3sM0

[@rolandbauer5073]

Thank you for this video. Saved my day. Super helpful!

[@PPFlatPack]

There is latest updated video on this Ikea pax sliding doors kzbin.info/www/bejne/iGWcapdjeKd3sM0 there is some small changes with latest model. Thank you for watching

[@jezelf2774]

Watching in 2021 in Canada. Thanks for this great video. - the floor rail now has little plastic end pieces to put on. So be sure to watch this while also consulting the instructions to see if you have that update too.

[@PPFlatPack]

Here is the updated 3parts on this ikea sliding doors kzbin.info/www/bejne/iGWcapdjeKd3sM0

[@ephemeralsamsara]

Thank you so much for posting this it's really helpful and has helped me refine what as was doing and gives total clarity to the instructions IKEA provide.

[@PPFlatPack]

Thank you for watching

[@mehruzmobedji8925]

Awesome video. Thank you

[@PPFlatPack]

Latest 2021updated version of these Ikea sliding doors : kzbin.info/www/bejne/iGWcapdjeKd3sM0 Thank you for watching

[@jadbatri2851]

Your videos are better than ikea's ones, thanks a lot.

[@PPFlatPack]

Thank you for watching

[@anksallu]

Thank you for your videos very helpful

[@PPFlatPack]

Thank you for watching

[@lesleewatson4266]

Very good video. thank you.

[@PPFlatPack]

Thank you for watching

[@brendaharris2441]

Very good explaining for ALL 3 videos. Lifesaver!

[@PPFlatPack]

Thank you for watching :)

[@knabellaks]

Really good editing of video. Different angles and everything. I bought wardrobe used used so this was sooo helpful ❤️ thank you.

[@RAZlEL7]

I also thank you guys 😍. You saved me lot of time. I really appreciate it .

[@PPFlatPack]

Thank you for watching

[@impreza1987]

Thanks very much for the video mate made putting pax wardrobes up easy and enjoyable 👌🏻

[@PPFlatPack]

Thank you for watching

[@merrychase9744]

hi. i appreciate the instructions. may i ask if the floor is not level, can you still install the sliding doors?

[@PPFlatPack]

Yes you can

[@merrychase9744]

@@PPFlatPack thank u

[@johnwebster4486]

Great set of videos!

[@PPFlatPack]

Thank you for watching

[@izzyartzi1894]

Thanks you so much for posting this detailed video. It is a great help in clarifying the IKEA instructions.

[@PPFlatPack]

Thank you for watching

[@SuperEpicgod]

You abolute legend thank youuuuuuuu so much. Absolutely perfect video which saved us so much time. Was built perfectlt using this video.

[@PPFlatPack]

Here is updated version for this Ikea sliding doors kzbin.info/www/bejne/iGWcapdjeKd3sM0 Thank you for watching.

[@dingai]

You are an excellent teacher. Thank you so much for this!

[@dingai]

Specifically, showing us the inside detail when you were installing the plastic rail supporter was just such a thoughtful detail to include. Thank you for thinking so carefully about the audience

[@PPFlatPack]

@@dingai Thank you for watching

[@OurBestLifee]

You make it look so easy , wish me luck !

[@LadyGeri1]

So helpful thank you!!

[@arahama1000]

Commenting for engagement have nothing to say but you saved my life thank fren

[@PPFlatPack]

Thank you for watching

[@Anonymous-hd9yi]

Good job mate. You have helped a lot of people. Subscribers

[@emanueletoti]

Thank you! I had to disassemble and reassemble my wardrobe to move it into another room, and the instructions were long lost! Your video was extremely clear and useful!

[@mufuliramark]

Cheers mate, that got me out of a bind

[@PPFlatPack]

Thank you for watching

[@huixuanc6481]

Thank you for the video, explanations are to the point and save me a ton of time!

[@PPFlatPack]

Thank you for watching :)

[@MagnaxVingtTrois]

Thank you so much for the Pax assembly series! It has been tremendously informative and helpful. Good work! 🔨🪛✌️

[@PPFlatPack]

Thank you for watching

[@mandychou]

This is so helpful! Thank you so much!

[@PPFlatPack]

Thank you for watching

[@jblondon1327]

Thank you, clear and detailed

[@PPFlatPack]

Thank you for watching :)

[@joshcook3967]

Legend! Thanks for your help mate!

[@PPFlatPack]

Thank you for watching

[@fredthechamp3475]

You deserve way more subscribers.

[@PPFlatPack]

I knooooow ;) Thank you for watching

[@sarahlj16]

Great video. Super helpful to me.

[@Naffa22]

Awesome video! Thanks for posting!

[@PPFlatPack]

Thank you for watching

[@mostafa5s]

Super, Dankeschön ❤

[@tobywhitehead7488]

OMG, this guy has a voice that should be reading children's stories! Buttery smooth!

[@ThePktabassum]

Thanks you so much for posting this detailed video. It's really helpfull for me today :)

[@magdix976]

Amazing thanks ❤

[@halitkay2096]

Thank you very much

[@bigboibenz]

Brilliant thanks

[@Scully331]

Thanks! This really helps!

[@fe.fernandes]

Great video! Thank you sooo much! 🙌🏻

[@anbeasivam7033]

Thank you

[@johnb4218]

A Great help. Thank you!

[@alanlyons8399]

an amazing informative video well done and thank you

[@jasonallnight7898]

Thanks 🙏🏼 😊

[@mariathornton2916]

So helpful thank you 👍👍

[@ddimov2557]

I'm having to cut an existing wardrobe from 4 doors x45cm to 3 doors. Do you think I would be able to trim the length of these rails and fit 3 doors in there? Tools, cutting skills and re-drilling holes are not an issue. I might need to purchase extra rollers for the third door as the set is for 2 doors only (I guess). Great and detailed video BTW, you should get paid by IKEA to do videos for them. The instructions are not always clear.

[@lisamurtagh6404]

Great video .

[@PPFlatPack]

Thank you for watching

[@carolbrady7435]

HELP please! The videos are SO helpful. Thank you! Can you suggest what we should do? We built the pax wardrobes and put in the drawers, rails etc. When we came to attach the 2 wardrobes together, they are not sitting evenly. Should we take out the interiors then make sure they are at the same height? Should we then install the doors before replacing the interior drawers etc? Sorry for such a long question - you might be able to save us a lot of headaches and money!!

[@PPFlatPack]

How big is the difference?

[@alfredh7108]

Very helpful Manual - Thank you!

[@PPFlatPack]

Thank you for watching ;)

[@norahassan6670]

Amazing job , thank you and well done 👍

[@billalmalik8180]

Should you add the drawers and hanging rails before or after you add the doors?

[@apex.drone.services]

Thank you very much! I had to mine again as we moved house and this was very helpful

[@TheMangusta]

Seriously helpful, thank you 💪

[@elle2762]

To do this can you use plain pax wardrobe frame and then afterwards add the glass sliding dots?

[@arabella8402]

I have these doors and want to replace the panels for the new Auli mirror panels. Are the new panels compatible with the old door frame?

[@Mayanksharma-hw3hn]

Thank you so much for the helpful videos. I am trying to build the 300x66x236 cm wardrobe, my both the sliding door are of 150cm each. I am really struggling with the door assembly. The glass is very heavy and we are not able to slide easily in the door panel. I would really appreciate if you can share some documentation or guide us with it.

[@PPFlatPack]

Here is the latest video on this ikea sliding doors kzbin.info/www/bejne/iGWcapdjeKd3sM0

[@Patrycja-]

Thank you for your video :)

[@12988Jake]

My problem is we have just put 4 50cm wide wardrobes up, and for to my floor being unlevel, and the rear wall also being out of wack, 2 of the wardrobes are a few mm higher than the other 2. Do they have to be exactly the same height for the top rail? My only option if so is to plane down the two higher wardrobes as I have no more adjustment left…

[@shafimuhammad3124]

Sir Make one video on this I wann buy this wardrobe plz (PAX / MEHAMN/AULI Wardrobe combination, white double sided/white mirror glass)

[@nickmalik7129]

Dump the instructions and WATCH THIS MAN VIDEOS! Ikea should give this man £1000000 for being clearer than their lame picture instructions…

[@PPFlatPack]

Agree ;)

[@MrFahdYehia]

On my pax there is a bracket on the inside of the right and left side of the second sliding door, as per instructions once the doors are are attached you need to loosen the bracket insert a little screw with an allen key which releases a latch that goes upwards on the right hand side and down on the left hand side. The right side won't release and is preventing the door from sliding shut. Have you come across this before?

[@robrechtkruft3389]

thank you for this!

[@PPFlatPack]

Thank you for watching :)

[@jimoneill5984]

Great video, made assembly and install of these doors easy. But, Is it possible to reverse the inner and outer doors? I would like to have the outer door on the right and the inner door on the left.

[@PPFlatPack]

Yes you can do that

[@georgealex19]

Awesome

[@theresalaunder8685]

Very good videos can you also do one that also puts on soft close for pax sliding doors

[@MikeCamoncam]

Does it have to be mounted to the wall? I just made one and when the doors slide, it makes some noise as the paxs shift a bit

[@SuperShroomieGaming]

I think IKEA may have updated the design - the end of my top rail looks a bit different; do you have to pre drill holes on each side for the top rail? There are no evident holes present at the front of the wardrobe frame.

[@PPFlatPack]

Here is the new Ikea Pax sliding doors kzbin.info/www/bejne/f53bnWivedekapo and there is no predrilled holes on the top.

[@realtindeli3316]

Could you put on the sliding doors before you join the shelves and do it later?

[@ErnieSesameStreet]

Is it there are different types of rail for the sliding door? Another of your installation video was using a different rail

[@PPFlatPack]

Yes. This is the previous model. There is new 3part videos on my channel for the new ikea pax wardrobe

[@jakubl7530]

GOOD FILM. THANK YOU

[@emmarobertson5943]

Is there a way to reduce the height of the doors, and make them only 3 panels high instead of 4 high. I want to put sliding doors under eaves / sloping ceiling approx 1m50 high (height can be adjusted to accommodate 3 panels but not 4). Thanks

[@sandeepdas.official]

Very nice. Thanks

[@jxyz501]

Thanks a lot for this video! You saved my life 😍

[@nazarposhta]

Hi. Is it possible to cut that rails slightly and to mount the doors on the smaller wardrobe body. The smallest such doors, which is possible to buy is 150cm and the wardrobe body I have is 136cm. What you think?