IMG 3167

[@rangerevolt1099]

Hello, how do you unscrew the big ring of the Vanos please

[@cuiivy]

is the VANOS rebuild a "one-time" fix, as we are permanently deforming the timing wheel? In other words, can I redo this entire procedure after it already had it done before? Much appreciated.

[@flyer5000000]

Have you found where to get the other seals to do it this way? Part numbers? I have a machine shop to do it. Just can't find the extra seals that don't come in the normal besian kit

[@mach5407]

The size is 2mm CS x 68 mm ID. www.theoringstore.com/index.p...ducts_id=11862

[@flyer5000000]

THANKS! Even Besian didn't know

[@haleym16]

@@mach5407 happen to have measurements for the screw on cover you made? Thread pitch, height, I.D, O.D, inner lip depth?

[@cheekygit2002]

Nice video, i have rebuilt my vanos using the beisan seals and i am still getting noise, in fact worse than before I rebuilt them so I am guessing i have done something wrong. I found it really hard to get the seals in to the little gap so this time I am going to try this method. The link below doesn't work for the O ring but do you know the size of the steel / iron split piston ring please ?

[@gheorghefrangulea6686]

Hi mate if i send 2 units to you, and the seal kit can u do the same thing ?

[@duparasarit]

salut, da-mi un telefon la 0747423341; te-as putea ajuta sa-l reconditionez in stilul beisan, sau daca ai kitul complet cum e in video pot face si asta.

[@duparasarit]

hi. I just changed one of my vanos orings and don't have any marks left on with the piston original position. Doesr it really matter? thanks

[@Elite.customs_479]

Yo same shit here, you ever figure it out?

[@duparasarit]

@@Elite.customs_479 I found out on a forum that it doesn't matter as it is well balanced

[@_DIRTe53]

Hey man I know this is an old thread but do you have to link to the forum you found this info on ? What we’re your results ?

[@duparasarit]

@DIRTE53 hi, No it does not matter, just make sure to put vanos in the retarded position. Changing seals didn't work for me. I ended up buying 2 new vanos 1200euro :))) now the sound is ok

[@_DIRTe53]

@@duparasarit thanks for the prompt reply ! Ok but now my question is how are you sure it didn’t work because you didn’t mark them ?

[@m750202]

how much would it cost me if you repair rebuild mine vanos from BMW X5 4.6is? Please pm I would appreciate it

[@KenworthPiterbiltovich]

Hi! I'm wondering if you could repair my vanos the same way? If yes how much would it cost me? Please pm I would appreciate it

[@mach5407]

Not at all

[@thines7168]

HEY COULD YOU DO MY VANOS LIKE THIS PLEASE SIR AND HOW MUCH YOULL CHARGE YOU CAN EMAIL ME AT [e-mail]