Implements Direct Single tine ripper with pipe laying attachment demo

Novaquip NSR010 Single tine ripper with pipe laying attachment , lays 40mm pipe at walking speed. Behind 45 HP tractor. Check out our website for more attachments like this, www.implementsdirect.co.nz or www.implementsdirect.com.au

[@atcfisherman]

Awesome implement.

[@PatrickSteil]

Can it be shipped to the USA?

[@carlosperez-cl2dw]

buena la idea para incorporar red de aguas blancas en el suelo para llevar el aguas a intalaciones o riegos de aspersion, muy practico.-

[@katrinaanon1038]

I wish you had shown how you join two pipes together and possibly put a "fish" into the line to pull cable through the pipe.

[@Bob-no4oi]

Get a helper....On one end place a string that can feed freely, tie it onto a piece of grocery type store bag that fits into the pipe, kinda snug kinda loose....go to the other end, arrach a shop vac securely..use duct tape.. turn on the vac..have the helper feed the line as vac sucks on the other end.....if you feed a small , thin line, you may need to use this thin line to pull a stouter line....attach this line to the cable you are pulling thru. Use black electrical tape to cover the line and the wire..so it goes thru smoothly. Also, liberally use some dish soap to lubricate the wire as you pull it thru

[@Bob-no4oi]

Joining pipes is done with a double barb...and a few stainless pipe clamps. In a professional job, the pipes are fused together. It us easier to pull one section of pipe at a time. Pull one section..then the next. Don't forget to put the cc outline barb between the 2. Once the wire is pulled thru the second piece of pipe, install the barb and the clamps. Be sure the ends match up first

[@Tomc8030]

@@Bob-no4oiI’ve used silicone spray and it worked great and a lot easier to apply.

[@CliffsideStables]

Where is this available in the states?

[@aidenzanker150]

Titans Implements makes the Pipe Layer attachment for a single tine subsoiler.

[@abhisheksaini3183]

Thank god

[@oldNavyJZ]

What is the deepest it can bury pipe?

[@ZhouLi]

good vedio!

[@VijayashKekan]

Depth ?

[@samsdad638]

This changes everything for what we want to do on our property. Huge! Thanks for the video!

[@asudavew]

Did you purchase one and did it work?

[@walduirfagundessanto]

Olá gostaria de saber como fazer para comprar este equipamento

[@FlyingAceAV8B]

Too bad this is completely useless where I am. Won’t be able to go more than an inch with all the rock.

[@Tomc8030]

It’s not a fit for everyone.

[@brandoncaldwell95]

If only my ground wasnt hard. I have one thats home built and works well, but the fields are clay...

[@michaelevensen84]

How deep can you go I'm Clay, we have alot of clay as.well, thanks

[@patriottoo2revelle331]

Just let a drip hose soak the area you want to trench, and it will soften the clay into mud, which is easy to slice.

[@wiktorpoliszczuk1372]

😂🤣😅😁

[@portnuefflyer]

I just laid 2000' of 1" poly with a homemade pipelayer. I bought a 2" 90 degree elbow from a electrical supply house, shortened one end (all you need is about 70 degrees, not a full 90), and welded 1/8" plate to it that then attaches to my ripper using the same large bolts. It's critical to be able to take the pipe layer part off easily, as everytime you come to a fitting it has to be "threded" again on the pipe, then bolted back onto the ripper.