I just installed oem mud flaps on my 22 wrx. Up front the oem ones were easier to install. On the back, rally armor did a good job with that set up. The oem rears requires drilling out 4 holes.
@azca.10 ай бұрын
Thanks for heads up. I was planning on getting the oem ones but I don't want to drill so I'll get the rallyarmor ones
@steve880310 ай бұрын
@@azca. the drill points are actually pre marked and you are only going through a thin bit of cladding. I would still go with OEM.
@azca.10 ай бұрын
oh, good to know. appreciate it!@@steve8803
@imoffendedthatyouareoffended9 ай бұрын
@@steve8803oem aren’t aggressive enough. Especially if your wheel setup is 20mm further than stock.
@steve88039 ай бұрын
@@imoffendedthatyouareoffended you call aftermarket mudflaps aggressive, I call them gaudy. But, to each their own.
@mattyrides Жыл бұрын
These directions worked perfect! A million times better than trying to decipher the written instructions. I’m a little bummed though. There seems to be creases in the fender itself after tightening. Too tight??? 4:32
@cendyliu5 ай бұрын
kzbin.info/www/bejne/mH3Vd356o9d2p5Y
@WrxJapanguy Жыл бұрын
Did mying today throw away the instructions and just watch this cat here 💯
@RobHTech2 ай бұрын
I ordered these with the altered lettering that are supposed to have the better brackets. I got a Rally Armor box with the correct part number and the regular flaps you see in this vid. The rear flaps do NOT fit like you see in this video. The middle hole of the rear does NOT line up with the OEM hold. You need to drill a new hole to make them fit correctly. The front fit fine.
@9MMSWORD2 жыл бұрын
Wait is this the same guy from the iag videos?
@ImportImageRacing2 жыл бұрын
Why yes it’s Jim
@BuckleUpGarage_2 жыл бұрын
Yep! That’s me 🤘🏻🤘🏻🤘🏻
@TurboDub19912 жыл бұрын
The new mudflapz really pop!
@ImportImageRacing2 жыл бұрын
Thank you! I think they do really set it off!
@Ezio214 Жыл бұрын
Thanks for this! Much easier than reading the supplied instructions!
@ImportImageRacing Жыл бұрын
Thank you!
@Rick4345 Жыл бұрын
I liked mine, Up to the point I lost the metal braces on the front. I replaced one side and sure enough, I lost the other side. I finally ended up putting on the oem version. So far I am very happy with them. Maybe I was doing something wrong.....Who knows.....
@Lukinaification4 ай бұрын
Probably just vibrated loose over time. I put a some Loctite blue threadlocker on them and that seems to be enough to keep them in place.
@RobHTech2 ай бұрын
The front use some cheap plastic bracket to brace it. I broke one installing them. POS. should be metal. IDK what the big deal is. RallyArmor could just make a metal piece instead. But I do like the looks of these much better.
@headreddedstepchild61772 жыл бұрын
I want these, but black with red letters. Is that possible
@ImportImageRacing2 жыл бұрын
Heck yes it is! www.importimageracing.com/products/copy-of-rally-armor-ur-black-mud-flap-w-red-logo-subaru-wrx-2022-mf92-ur-blk-rd?variant=39541670838368
@headreddedstepchild61772 жыл бұрын
@@ImportImageRacing awesome, thank you! What happened to the discount that was on the ones in description?!
@ImportImageRacing2 жыл бұрын
since everyone but us is sold out, the pricing auto-corrects to match the market. email me directly at sales@importimageracing.com and i'll create a custom quote for you ;)
@itskwis47676 ай бұрын
will this be the same process for the new era ones?
@losthope483 Жыл бұрын
What size are the mudflaps? Does anybody know a size
@KrayonTheKreator Жыл бұрын
I'm having trouble with removing the screws on the front only 2 outta the 4 are coming out any ideas as to how to get the others out?
@daneyoung7770 Жыл бұрын
If they're just spinning and not backing out, try to put a flat head screw driver at the base of the bolt while trying to remove it at the same time. Sometimes, these can get stuck in the plastic and need a little extra to get them back to the threads to back out.
@gregaleksandrovsky5806 Жыл бұрын
Hey guys, I bought myself the Splashguard kit, but I also want the mudflaps. The seemingly use the same holes for the most part. Do you think you can install both? Thanks!
@BuckleUpButtercupTV2 жыл бұрын
The look nice!
@johnb382s7 ай бұрын
Of course Im the one person in all of the USA who gets a kit missing one of the foam spacers in my box 😑 so installed both front without them.
@ImportImageRacing7 ай бұрын
Have you reached out to Support@importimageracing.com for assistance?
@rewthlessgaming9357 Жыл бұрын
Thanks for the video I couldn’t have gotten them on without this vid thank you so much👍👍👍🔥
@ImportImageRacing Жыл бұрын
That means a lot, thank you!
@StickerFab2 жыл бұрын
Digging it!
@fredastaire6156 Жыл бұрын
I just got my mud flaps yesterday for my 2004 STi but it did not come with any metal brackets. Poor quality control. But at least they came in a cool “made in NYC” box 🤷🏽♂️
@ImportImageRacing Жыл бұрын
This is for the 22+ WRX mud flaps.
@chrishutton3839 Жыл бұрын
Thumbs up my guy! The written instructions SUCK! This made the work fly bad though. Thank you so much!
@EdwardSteadfast2 жыл бұрын
I love new VB content but… those just look dumb. Or “out of place” on this WRX. Those are for outback’s and foresters ..in my opinion. Mud flaps…. My VB sees no mud bro. 😂
@ImportImageRacing2 жыл бұрын
Mine will be drifted on my offroad course so :)
@EdwardSteadfast2 жыл бұрын
@@ImportImageRacing well. There’s that! ..video proof or it didn’t happen😁
@ImportImageRacing2 жыл бұрын
@@EdwardSteadfast working on it. we just did some long travel suspension, once it gets here, we will change out the wheels/tires :)
@noob.168 Жыл бұрын
buys a rally car and says it doesn't belong on mud...weird.
@Robbiepowaa Жыл бұрын
🤓
@mikeyg6038 Жыл бұрын
Dope video nice and easy no bullshit
@luistorres28098 ай бұрын
🥲 retain screws for me didnt come off .. just kept spinning fml