IMPOSSIBLE BROKEN OLD AXE RESTORATION

In this restoration I wanted to leave the look this axe would have had when it was in one piece. I am very satisfied with the result and with its functionality.
I hope you like it
Instagram: bunkerTools

[@bunkerTools]

👉👉👉👉👉👉👉 kzbin.info/www/bejne/gl7Od3qQothkpcU 👈👈👈👈👈 En este vídeo utilizo este hacha / In this video I use this ax / В этом видео я использую топор

[@ReasonAboveEverything]

I absolutely love it when people use their mind to overcome hard problems with very basic tools. It put more emphasis on skills. Pretty much anyone with little experience could have split it open, put it in the forge and bashed it when it's white. For a long time only tools I had were couple hand tools and my feet as vice. Didn't stop me from building a medieval crossbow. Great job, dude👌.

[@bunkerTools]

Thank you very much dude, it is appreciated that someone values ​​your work

[@SerendipityAntonio]

Porque lo vi, creí, madre mía, no me lo podía imaginar, un trabajo espectacular, Enhorabuena 👍👍👏👏👏👏👏 Un saludo compañero 🧤😷🧤

[@bunkerTools]

Muchas gracias Antonio. Para mi ha sido muy satisfactorio poder restaurar este hacha que veía insalvable..Un saludo 👍👍

[@WoodworkingBarcelona]

Buen trabajo. Que tal rrsiste la soldadura con el impacto? Gracias por compartir

[@bunkerTools]

Por ahora sigue perfecto y ya ha trabajado, aunque no demasiado, pero teniendo en cuenta que este hacha esta destinada a descortezar y trabajos de talla mas superficiales estoy seguro que aguantará perfectamente, el tiempo lo dirá. Gracias a ti, saludos!

[@SoyunMapache]

Joder amigo no dejas de sorprenderme eres todo un maestro!!

[@bunkerTools]

Sorprenderte me gusta, pero maestro ni de lejos! Esto es la primera vez que lo hago. Muchas gracias mapache 👍🛠️🛠️🛠️

[@johnmiller2191]

Looks beautiful, however not sure how long that weld will last. Normally two steels are forge welded together when creating an axe, but you did the best with what you had

[@bunkerTools]

Thank you very much friend. I hope the weld holds up because this ax is for carving jobs, but time will tell

[@chaz7346]

@@bunkerTools I wouldn't worry about the welds. But I am wondering, did you draw out the temper in the file? To make it less brittle?

[@BricoglobalToledo]

Da gusto verte reparar estas cositas 💪. Y la solución al trozo que le faltaba me ha gustado mucho. Un abrazo y cuídate 👍

[@bunkerTools]

Muchas gracias compañero! La idea apareció sola al ver la lima, no pensaba que iba a ir tan bien. Cuídate tu también, un abrazo.

[@brayanlandavazo2b451]

*Me ha gustado mucho,y eso que yo no soy de ver este tipo de videos,trabajas muy bien y me encanto que traducieras algunas partes al español* Traduction: I liked it a lot, and I am not watching this type of videos, you work very well and I loved that you translated some parts into Spanish

[@bunkerTools]

Me alegra mucho que te haya gustado el vídeo, así como las notas que pongo en inglés/castellano. Saludos amigo

[@MakingHuertasstuff]

Muy buena restauración. Un hacha muy ligera para tallar. Me ha encantado tío. Un abrazo

[@bunkerTools]

Muchas gracias Fermín. En efecto es muy ligera y va super bien, me alegro mucho de haberla salvado. Un abrazo

[@Bricoleando]

Perfecto compañero, has recuperado una hacha inservible. Buen trabajo. Saludos.

[@bunkerTools]

Muchas gracias compañero 👍 es un halago viniendo de tí. Saludos

[@leocalabro1114]

Beautiful hatchet restore what’s old good job

[@bunkerTools]

Thank you very much!!👍

[@Anmobgoccult20]

So with pleasure, watching your videos, well done, bravo abs. perfect, awesome work, tnx. and so on, respectful from old BG.

[@bunkerTools]

Thanks for your positive comment

[@michaelhogan9053]

I think it says FDNY on the ax. May be an old Fire dept ax?? may have had a pick on rear?

[@bunkerTools]

I THINK IT PUTS A 'FONT' A CATALAN LAST NAME. THIS IS A CATALAN AX, IT IS NOT A FIREFIGHTER

[@mariovergara727]

¡Excelente trabajo amigo!

[@JavierBonillaC]

That is quite amazing. I thought that if You took of the welding from the outside the acts would break but apparently in welts in between the plates too. Is that the case? Beautiful work

[@bunkerTools]

Tank you very much. The weld penetrates inside, that's why I made the chamfer

[@leprosysucks]

Still wouldnt trust using it welds and impact tools do not mix. Lovely wall hanger though

[@marcom2248]

Great Job!

[@bunkerTools]

Thank you very much👍

[@alexgamez9897]

No sé si me puedes entender,pero la verdad es que este ha sido uno de los mejores trabajos que has hecho,y la verdad que con tus vídeos se aprenden muchas cosas, sigue así 👍.un saludo desde España.🇪🇦

[@bunkerTools]

Muchas gracias amigo, claro que te entiendo, yo también soy de España. Me alegra ver la positiva opinión que tienes sobre los proyectos que hago. Sin duda, con comentarios como el tuyo uno se motiva más a seguir mejorando y aportando lo que pueda. Un Saludo compañero gracias!!

[@angelterral5865]

Estupendo trabajo, te quedo genial, like y suscrito

[@bunkerTools]

Muchas gracias!! 😉👍

[@PapaManitas]

Ale, hacha nueva, me ha gustado lo del tubo de pvc, es una buena solución.

[@bunkerTools]

Muchas gracias Juanjo. Lo del tubo de pvc se me ocurrió en la primera restauración de hacha que hice y la verdad, bonito no es pero va perfecto, y se puede aplicar a otro tipo de herramientas.

[@woodbyalex7009]

Me a sorprendido que le soldaras la lima me a gustado mucho la restauración y por si no lo sabes el madera de encina el mango un abrazo

[@bunkerTools]

La verdad no sabía que era encina, gracias Alex. Me alegra que te haya gustado. Un abrazo

[@term_1706]

Nicely filmed, subscribed

[@bunkerTools]

Thank you very much!

[@1973Washu]

You should make a leather axe collar to protect the part of the handle near the axe head

[@bunkerTools]

that would be great, thanks for the input, maybe I do it from paracord. Thanks👍

[@PrepperSurvival]

Buen aporte y buena restauracion a quedado como nuevo y super funcional asi que genial un saludo

[@bunkerTools]

Muchas gracias compañero. Desde luego funcional es, estoy muy contento con el resultado que me está dando. Saludos

[@srfrg9707]

I was wondering "How does he weld it? it's not grounded!" then I realised the surface is a sheet of metal.

[@bunkerTools]

Nice appreciation

[@danfernando8092]

Love it!

[@bunkerTools]

Thank you very much!!

[@stevewalker7822]

Awesome repair and restoration!

[@bunkerTools]

Thank you very much!!

[@a19hehhi]

Great job , keep going

[@bunkerTools]

Thank you!!

[@user-rz9jq7hh4u]

С таким углом заточки только бумагу с волосами и резать ибо не для рубки. Да и рубку с такой "сваркой" долго не выдержит.

[@dustonzroad]

А что не так со сваркой?

[@user-me2zq3ze2d]

Мясо рубить самое то

[@user-jm7qt8mg6d]

@@user-me2zq3ze2d нарезать мясо

[@YuRiL6]

@@dustonzroad лопнет по ней 😂

[@bunkerTools]

Я просто знаю, что использую топор, и он отлично работает, он не тупит и ничего не выглядит сломанным

[@LumisArms]

Should have normalised the file first, left it twice as long as needed folded and forge welded to the end of the axehead then re heat treated the cutting edge. The welds will fail eventually. If you were adamant about welding it on, use gas welding.

[@bunkerTools]

Surely there are better ways to do it, I did it with the means I had. Thanks for your inpu

[@xyers6836]

It looks Soo gooooood gawd

[@bunkerTools]

Thank you!

[@Lou-hv6js]

Nice job! What are the stamped letters “FDNY”?

[@bunkerTools]

i think the letters are ''FONT'' I guess it is the last name of the creator of the original ax, the ax was forged by hand (I think). Thank you very much for your comment 👍

[@philippedavid6407]

@@bunkerTools Couldn't that be Fire Department New York? It might therefore be a fire fighter's axe whose back was missing too...

[@clint2284]

@@philippedavid6407 Too small.

[@markarmstrong3394]

Awesome !!

[@bunkerTools]

Thank you dude!

[@user-dx6pt9oo6h]

Hi bro 👋👋👋 good to see you 🤝🤝🤝 awesome restoration axe 👍👍👍💣👌🏽✌🏻

[@bunkerTools]

Thank you bro, its nice to see you here😉👍👍🛠️🛠️

[@valtercatozzi6191]

Very Nice.... good job.... Fron limeira - sp. Brasil.

[@bunkerTools]

Thank you dude

[@noles353]

any history on the axe? great build also.

[@bunkerTools]

Thank you. I don't know anything about this axe, it was lying on a farmhouse. The name that appears engraved ''FONT'' I guess it is the last name of the creator of the axe

[@92656trw]

bunkerTools are you sure it isn’t FDNY? Fire department New York.

[@user-io1sc3in2g]

Почему нагревом-оттяжкой-закалкой-отпуском, по УМУ не сделать?! Просто испортил хорошее изделие - топор! Кто рапид(напильник) ставит на остриё ударного инструмента? Да ещё и с плохого качества сваркой.

[@user-lm3os4wq5j]

Не нужно так критично относиться. Видно же что топор изначально не для рубки был, а так, курам бошки отсекать. Топоры бывают разные и такие туристические тоже должны быть.

[@falqar1.6]

Nice work!

[@bunkerTools]

Thank you very much!

[@Anatoly76rus]

Я не специалист, но почему то кажется что так не варят, что это за сопли там, я ни разу сварку в руках не держал, но почему то кажется что так сварить и я бы смог )) Сори если я не прав)

[@peterdriver4760]

Excellent

[@bunkerTools]

Thank you very much

[@selfrestoration9564]

Good work Done 👍 👏 👏 Keep it up 👆

[@bunkerTools]

Thank you very much bro!! 👍👍

[@patriotaespana8842]

Perfecto 👏👏

[@bunkerTools]

Muchas gracias

[@redzored74]

Salut du très bon travail continue comme ça bravo 😀

[@bunkerTools]

Bonjour, merci beaucoup! 👍

[@MRcustomcrafts]

Buena solución, me preguntaba como solucionarías lo del trozo que faltaba en la foto de la miniatura. Muy bueno 😋👍

[@bunkerTools]

Jejej muchas gracias compañero. Ahí está la gracia en a ver que nos inventamos en estos casos😉👍👍

[@hadritoys]

awesome sharing sir......lot of love from pakistan.......

[@bunkerTools]

Thank you very much dude!! 👍👍

[@user-lo1fg6wj2c]

Всё хорошо классно получилось!

[@bunkerTools]

Спасибо большое друг

[@stevenjennings8347]

Awesome informational educational video experience Y'alls

[@bunkerTools]

I'm so glad to read that. Thank you!

[@user-xy9fj3jt9b]

Я думал, топор ковкой будет исправлен. А тут сварка.

[@couteaubateau3486]

Excèlante job 👏👍😉

[@bunkerTools]

Thank you!! 👍👍

[@joelantonioputoyjarquin7583]

Me gusto mucho la idea creí que en algún momento la copiare pero la soldadura no creó que aguante mucho

[@bunkerTools]

Gracias amigo, espero que te sirva. Piensa que este es un hacha para tallar, descortezar, pequeños trabajos, yo creo que aguantará perfectamente

[@joelantonioputoyjarquin7583]

Ooo si para cosas pequeñas si servirá , pensaba que era para uso rudo la hacha 💪

[@miguelalejandroromeromendo4907]

Me pregunto que más puede reutilizar si uso un pedazo de Lima para reparar una hacha

[@bunkerTools]

jejeje nunca se sabe amigo. Muchas gracias

[@gobagamy5]

Waoooooooow niec wark 👍🏾

[@LiEnDoc]

Ни отпуска, ни закалки... Я ничего не пропустил?

[@user-jm7qt8mg6d]

Я так понял,что металл уже закален! Но это полный бред,топор должен быть цельный

[@artemweee2353]

Так он же сам заколяется, у них все само по себе

[@GabiFodorrasRO]

Big like!👍👍👍👍👍✅💪Felicitări!

[@damiavidalsalvado5405]

hola, solo comentar que este estilo de hacha es un hacha catalana, solo utilizada en Catalunya desde tiempos remotos, desconozco el porque de la similitud a las hachas nordicas, pero es una hacha que tiene la mayor precision de golpeo, muy bien por la restauracion, decirte que si buscas estas hachas aqui en catalunya encontraras de todos los tamaños que deses. saludos

[@bunkerTools]

En efecto, se trata de un hacha catalana, ya se lo he comentado a mas de uno (habla inglesa) que creía que había puesto el hacha al revés.. si miras mi canal verás que restauré otro hacha catalana bastante más grande (me costó 5€ por wallapop..) Muchas gracias por tu comentario, eres el primero que hace referencia a la procedencia del hacha. Tengo una pregunta, cuando dices que tiene la mayor precisión de golpeo, te refieres arrojandola? Saludos!

[@damiavidalsalvado5405]

bunkerTools lanzándola no lo sé jejejeje pero si a la hora de trabajar la madera los golpes son muy precisos y no dañas tanto la madera haciendo cortes innecesarios, ósea que no solo se utilizaba para la tala gruesa que también se utilizaba para la confección de trabajos más finos, para moldear la madera según que se quisiera hacer

[@bunkerTools]

@@damiavidalsalvado5405 jajaja okok😅 La verdad que esta la estoy usando y es la mejor que tengo para descortezado y rebajes de troncos para prepararlos para tornear, va realmente bien.

[@user-ge2cw3tt4v]

Острая железяка

[@escritorio8426]

la soldadura es una gran debilidad con gran seguridad se va a romper ahi una buena soldadura es de corrido y las piesas precalentadas en ese caso las piesas se unen mejor

[@bunkerTools]

Yo con seguridad no te puedo decir si aguantará o no, yo creo que si, ya que este hacha es para trabajos de talla sobretodo, que son menos exigentes, pero el tiempo lo dirá, desde luego voy a seguir usando este hacha y saldremos de dudas.. Gracias por aportar tu opinión

[@escritorio8426]

@@bunkerTools si me permites un concejo soy soldador desde hace 12 años y para soldar acero de esta dureza se nececita electrodo para h13

[@danielbaez2564]

Estoy aprendiendo, y me surgió una duda, entiendo que el enfriar las piezas es para no perder el temple del material. Pero eso no cristaliza y debilita la soldadura?

[@escritorio8426]

@@danielbaez2564 si la cristaliza amigo hay q enfriar con aceite es mal lento pero efectivo

[@robinsoncrusoe6331]

Good job. But, you need improve your welding skills.

[@bunkerTools]

I have a lot of things to improve, and yes, the welding skills are one of these. Thank you dude

[@tootall5559]

I was just going to say that. Not skills as much as technique.

[@jesseterrell9354]

Lol I believe a good weld looks like a row of times laid on top of each other not the sporadic drops of a mad man

[@tootall5559]

@@jesseterrell9354 Actually a row of dimes is a good thing, but not when using a stick welder. you either need to do each dime, then stop and clean it of the slag and such, or do a solid weld where the slag and such does not solidify until you're past that point of welding. with this here and there one on top of another method, you're liable to get blank spots and inclusions that are really slag or other impurities. I was expecting better welding since he prepared the weld joint properly, guaranteeing a good weld if you don't get junk in it. also I think he was running a bit hot. Lower the heat and do a continuous weld. that metal was pretty thin, too much heat makes it hard to do right. a nice TIG weld would have been the way to go if he had such skills and equipment. Also many don't pay attention to the grain of the metal. Metal has grain just like wood, but on a smaller scale. if you grind across the grain, you'll remove more material but get a much rougher finish from the same grinding wheel.

[@aga123mastagali7]

молодец👍

[@bunkerTools]

спасибо друг👍

[@lorenagaona2906]

Que pasada! Y el bonus ??

[@bunkerTools]

Thank you😘 El bonus está al final como siempre, no es nada de destrucción esta vez 😅😉

[@jessiebrown6112]

Comedy gold...this video!

[@tntchitwood]

Good job man

[@bunkerTools]

Thank you very much dude

[@bunkerTools]

Thank you very much dude

[@jaylew889]

Bro you want to shave your arms and your not a swimmer, it's cool man who cares what people think, it's 2020. You didn't have to repair an axe head and go through all the trouble just for a little manscaping. You do you my man, screw what others think. Great job on the restoration though

[@bunkerTools]

Thank you very much for your comment, I value your words

[@springof-wf8vy]

Outfreakingstanding.. 👍👍👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸

[@bunkerTools]

Thank you very much!!

[@jamesdolan5236]

Well done

[@bunkerTools]

Thank you!!

[@kzkzkzkzkzkz9]

Не знаю, не знаю...а вдруг при активном использовании отлетит этот кусок в голову. Опасно

[@Mikhandmaker]

Quien se puede imaginar que parte de ella es un trozo de lima???😶 Te a quedado perfecta, se que te va dar pena usarla pero es lo que hay, se cogen ciertos vínculos con las herramientas echas a mano, que no nos dejan usarlas 😂😂😂

[@bunkerTools]

Muchas gracias Mikel! Pues a mi no me da ninguna pena usarla! 😂 Eso si, ya le he cogido cariño especial. Me encanta hacer cosas funcionales, es doble satisfacción, y por cierto me he hecho otra herramienta que estoy encantado, y también la uso! jajaja ya la verás 😉

[@tongthongchannel8940]

Bạn sửa chữa nó thật tuyệt vời

[@bunkerTools]

Cảm ơn bạn rất nhiều

[@jeffalmond]

Couple of good strikes and that weld will break.....otherwise good job

[@bunkerTools]

Thanks for your positive words. I have no problems at the moment for the use that I am giving it.

[@MNDAS-iu2kf]

Ohh Excellent restoration work I witnessed today. From which country you are belonging, Sir. I am INDIAN

[@bunkerTools]

Thank you very much dude! I'm from Spain.

[@AlexWoodRu]

Показать пальцем, в каком месте он лопнет при первой рубке? Объяснить почему?

[@bunkerTools]

Посмотри мое последнее видео, я использую его там

[@ronwallace6273]

my only question is wouldnt be better to tack one side and make a few passes than to tack fill in the crack up , cleaning after every pass , I would be afraid it would break not hot enough welds , but you did great job , not complaining just asking

[@bunkerTools]

Thank you very much dude, surely there are better ways to do what I did, I did the best I knew how. Respectful criticism is welcome😉Regards

[@ronwallace6273]

I'm a welder for 30 years I would tack opposite side get you a piece of copper put under the crack and weld crack with a strip weld dead center then fill sides up with other passes and get all slag of before another pass and then do side of tack , you did great job , I like to do this stuff too I like to hear others and how they do jobs nobody knows everything

[@fredschuttenbeld4571]

@@ronwallace6273 I'm not a welder, but I think just weld a beat on will heat the base material and make it brittle. It's high carbon steel. Tack filling it puts less heat in.

[@ronwallace6273]

@@fredschuttenbeld4571 the problem is just tacking it you don't get penetration and it will break easier , your just filling it not welding both sides together

[@fredschuttenbeld4571]

@@ronwallace6273 yes I know that, but that's why this guy made a kind of tongue and groove. It is my understanding that if welding high carbon steel with a lot of penetration (heat) it will make the base material brittle and susceptible to cracking (the reason why welding high carbon steel is difficult to weld) and thus (I thought) a common practice is make a V groove and (tack) fill it. But as I said I'm not a welder. I just came across this video as I was searching for welding axe heads. As someone asked me to weld a cracked/chipped axe head. I have done a fair bit of welding in my life but wanted to see how others handle this task.

[@bardiahakhamaneshy1365]

Very good

[@bunkerTools]

Thank you!

[@VansonsAvto]

Классный контент 💥👍 я подписался. Я тоже снимаю такой контент. Только начал.

[@1millionviews951]

👍

[@thatwasgood4656]

Молодец

[@mrp8871]

Поддерживаю, давайте подпишемся

[@bunkerTools]

Спасибо большое друг. Я желаю тебе удачи!

[@YuRiL6]

Не делай так

[@CanalMiguelLopez]

Como nuevo!!

[@bunkerTools]

Gracias Miguel! 😉👍

[@nut6442]

It is not Impossible, since you fixed it. Anyways, nice video dude!

[@bunkerTools]

Yes, its not impossible..😂 Thank you very much dude!👍

[@magicfoot0505]

I'm not a welder, but did some welding for about five years. The welds kinda bothered me

[@bunkerTools]

The welds I made are not professional, ok, I am sorry they bothered you.

[@Mr53Gray]

Мастер!

[@bunkerTools]

Я не учитель, но спасибо!!!

[@Mr53Gray]

@@bunkerTools Так я и говорю.Мастер.Но я бы такой красивый топор поберег!Напильник хрупкий..

[@user-sl3il5sz2s]

There is a risk of cracks at the weld site. At least you should have done full tempering and repeated quenching. A better normal blacksmith welding, with two petals on the sides.

[@bunkerTools]

I did what I could, I hope it does not break, at the moment it is working perfectly

[@27k91]

Сделал топор всасал напильник ....молодец мля

[@kz11377]

If it is stamped with FDNY it is a fireman's axe

[@cathalhurley7945]

The metal in files shatter so it will probably break

[@bunkerTools]

Time will tell, for the moment it works perfectly. What is certain is that the original ax broke

[@rodrigofrederico5339]

Mais você não temperou o metal está mole vai amassar com o uso...

[@bunkerTools]

A lima já está temperada, é um aço muito duro. durante todo o processo, resfriou o metal para não superaquecê-lo e manter o temperamento da lima

[@user-ql8hx5dc9j]

После такого восстановления им можно что-то рубить?

[@bunkerTools]

Да, на данный момент я им пользуюсь и работает отлично

[@user-jm7qt8mg6d]

Пару раз ударил по берёзе и нет заточки,а то и топора

[@Sahin7530094]

А то и головы

[@nheresaorillo4081]

Good for sorvivore

[@bunkerTools]

Yes i think so too, this axe is light and sharpen!

[@user-gm4uy6ou9p]

Ни отжига , ни закалки , ни отпуска, при хорошем ударе лопнет

[@VuVanAnhA--]

Thất vọng về mối hàn

[@ptbentley2000]

Is it me or does that axe seem like it’s on upside down?

[@bunkerTools]

That is the original design of this ax, it is a Catalan ax. it's not the other way around

[@user-dy2xu7vj5g]

Можно было-бы рисунок вытравить. А так супер!

[@claudyroom8602]

So actually it is possible...

[@bunkerTools]

Yes, it seems

[@Vce_zamki_msk]

Подмышки надо было побрить)

[@infomaniam4082]

Напильник испортил чтобы топор слепить, в чём смысл?

[@bunkerTools]

файл был старым и изношенным, это было для вытягивания

[@mehmetdevrimsen]

I think this is not true. first you need to normalize the file. because file is very hard and fragile. The second step is to weld. (electric arc, forged or other way, it doesn't matter. ) . Finally, the hatchet must be hardened again. As you have done, the ax mouth is very hard and fragile, the weld line is very weak in integrity, like the weak ring of the chain.

[@bunkerTools]

I dont know if you are right in what you say, but I am using the ax normally and it works perfectly, in addition, it does not show any sign of breakage.

[@mehmetdevrimsen]

@@bunkerTools ok I understand you. This is just an advice. And be careful when the use it. İf you wonna you can investigate what I say. Have a good work...

[@luckywize5270]

Hey Don't do that!!! You can't Restore Your hand's hair #jk 🤣🤣🤣 Nice job 👍☕

[@bunkerTools]

hahaha the next cut test will be in the leg hair.. Thanks dude 😉

[@martybrady9454]

Sorry to say but you put the ax on upside down I know that’s how it was on the handle but the curve on the top is supposed to face down

[@bunkerTools]

You are wrong, this is a Catalan axe, search in google and you will see it

[@user-qf9nu4lv1k]

Русские рукоятку делают по другому и у них возникает много вопросов и претензий. Но тут ведь дело не в рукояти..

[@bunkerTools]

спасибо тебе

[@user-qf9nu4lv1k]

@@bunkerTools пожалуйста:-) Your videos are often laid out on Russian KZbin. Discussing them can be very interesting. I hope it will be so:-)

[@bunkerTools]

@@user-qf9nu4lv1k Thank you very much! i'm glad to read this! Приветствую всех россиян! 👍👍

[@user-qf9nu4lv1k]

@@bunkerTools Христос воскрес! В воскресенье была Пасха. Удачи в работе! Хороших друзей и здоровья, чтобы и на друзей хватило!:-D

[@szymonchudzinski6245]

Nice job but I don't like that you destroy other tool.

[@bunkerTools]

Thank you, but the file was absolutely worn out

[@matejpramnik]

I love hard drive magnets.

[@bunkerTools]

😅😉👍

[@coticisnersis7784]

Это точилка для карандашей.....

[@user-zb5hy5dj1y]

я рессору вваривал ! закалил отпустил !уже лет 5 держится топорик!