Incorrect inverter setting causes AC /Heavy Load to Trip continuously

In this video I have explained tha reason that causes the AC or heavy load to Trip again and again

[@LifeLab365]

good way to educate audience about knox 5600

[@SSGGOD666]

Assalam alaikum sir i appreciate your effort and work you put in these videos and thankyou for sharing your knowledge with us. I have kryton 8000 6kw hybrid. Kindly provide detail of 60 and onwards setting for 48 volt set up. Jazakallah.

[@Chobkar]

Dear you can use simple formula for 60 and onward setting. 2-3 v less than original volts of the battery. Original volts of your battery is 48 that means you can keep low dc cut out around 45 if tou have lead acid batteries and around 25-30% if you have lithium ion Phosphorus battery

[@WahSonyElectronics]

Bhi knox 4000kv ka ivertr k sath 8 panel 545w k lagy hn 1parel ar 7 sires to kya sub panel sirse m best kaam krty hn ya jasy m ny ky hn wasy dosara ags 1800 battery lgi hy par 1tun ac iverter battry py ni chlta ?

[@Chobkar]

Waslam. Dear first of all connect all the panels in series. This inverter supports 500v DC so you can connect 10 panels in series very easily

[@Chobkar]

Dear it is always best to attach tubular battery with inverter instead of simple battery. It should run the inverter check your settings. Consult my other videos for the correct setting

[@arslanmunir8699]

I am face same issue, i am using AGS sp tall 2000 battery with same inverter. Can i reset the sitting now? Or just change only this both sitting. Now my sitting is on 27.5

[@Chobkar]

Yes you can change but be clear about one thing AGS tall is just tall battery it is not tubular battery so backup would not be as good as tubular battery

[@asimhunainlife]

Ye video ap ne subha kitne baje banai he? or ye normally watts aana kitne baje tak shuru karta he inverter?

[@Chobkar]

Around 7:00 in winter and around 6:00 in summer

[@wajahatali7929]

Aoa. Bhai kya knox 5600 main jab voltage 220 sa down hotay hain exple 150-180 tu ya inverter same yahi voltage output main deata ha. 220 nahi karta ?

[@Chobkar]

Sorry dear apka question clear nahi hay. 220v kaunsay AC ya solar sy anay walay DC?

[@chishtiamobilerepairing5241]

Brother hybrid me knox or tesla me konsa best rahy ga?

[@Chobkar]

Knox and tesla both are from same family both are designed by voltronic and are sold sold here with company's own branding otherwise both are same and are sold by voltronic with different names in other part of the world

[@CoderStuDio]

bhai jb wapda aa jaye per charging only solar ho toh 2nd output on ho jaye gi ya ni ?

[@Chobkar]

Yes dear start ho jay ga because tab apka load wapda sy run ho raha hota hay battery sy nahi

[@Dfgyvghh]

Boht zabardast or logically smjhaya ap ny. Bro ye inverter konsa h apka or kitny kw ka h

[@Chobkar]

Knox Pv 5600 4KW

[@MuhammadAmin-d7l]

Salam If I set option 60 on 23 volt My battery will cutoff on 21volt (night) So can I set setting 60 and 63 on 26 voltage if my floating volt is 27

[@basharatzia3525]

Second load again kese on ho ga battery charge less ho gi..? Jb pv he na ho...?

[@Chobkar]

Ye jab charging start hogi to tab he on hoga

[@muhammadsalman1381]

A.O.A Bhai main nay inverter only solar charging per set kia hay to jub take sunlight ho ti hay wo battery full dikhata ta hay but jaisay he sun off ho ta hay wo battery around 60% dikhata hay jubkay battery use bhi nahi ho ti hay please guiide jazak Allah

[@h.a.hamza345]

100 Amp 4 Battery pr kya voltage rakhyn ? Knoc krypton 8000 ..48 volt hai

[@Chobkar]

Kaunsay voltages dear?

[@TanveerHussain-o6o]

Assalam u alaikum bhai mene naya lia hai konx krypton 5600 but is mn warranty card nh hai secondly service centers ka bi bta den my distt sahiwal hai thanks

[@naeemasghar2573]

I am facing same issue no warranty card in box On enquiry the seller called the whole seller who replied that warranty can be claimed from serial no of the inverter.... And no warranty card required

[@azharkhattak7751]

Ab compnay ne card khatm kar dya ha purchasing bill he warranty card hoga

[@Chobkar]

Warrant of this inverter is online. Your serial number and ID shall be used for warranty. And warrant center near to your area is in Lahore but it is not fully functional yet. Right now every claim is being sent to Islamabad. Hopefully in couple of months Faisalabad and Lahore centers would be fully functional

[@oldisgoldjhankar9476]

Zeonic duamond 4.5kw with 8 junko 580watts panel. Ac 1.5ton ok or microwave ok. But trip on 1000watts iron. Kindly help

[@Chobkar]

Iron 1000 watt nahi hoti dear iron kam sy kam 1800 watt hoti hay. Ap wapda sharing Kar lein ya battery sy

[@shanubhatti313]

AGR INVER JIS B WIRRING PAY LGA HO OR USKI WIRRING PICHAY SAY PHASE CHANGE KR DIYA JAYE TO US SAY INVERTER KO KOI ISSUE HO GA??? WIRRING SAY MURAAD PHASE OR NUTAL HAY...

[@Chobkar]

Sorry dear apka question nahi samjha

[@shanubhatti313]

@@Chobkar BHAI METER SAY WIRING AGR PHASE KI JAGHA NUTAL WIRE LAGA DI OR NUTAL KI JAGHA PHASE (RED & BLACK) TO AGR INVERTER KI WIRING HONAY K BAD USKO CHANGE KIYA JAYE METER SAY TO KOI ISSUE TO NI HO GA??

[@Chobkar]

@shanubhatti313 bhai apnay polarity ka khayal rakhna hay means neutral ki jaga neutral aur phase walay slot mein phase wire k colour sy koi farq nahi parta Wo hamari asani k leay hota hay. Secondly ab jab wiring ho chuki hay aur ap change Karen gy to apko meter sy inverter tak poori wire ki length Change karni hogi bashart e k apkay installer nay inverter ki wiring standard procedure pe ki hay means red for phase and black for neutral

[@shanubhatti313]

@@Chobkar G US NAY INVERTER KI ISI LIYE CHANGE KI Q K BY MISTAKE YA JESE B METER SAY WIRING THEEK.NAHI HUI THI... Q k installer ko pta ni tha pehlay to ulta lagnay ki wajha say generation nahi ho rhi thi is liye wiring ko samjh k ulta lganay pay chal gya tha mera inverter primax glaxy hay...

[@Chobkar]

Yes zaroor hoga. Inverter k mother board pe Jo components lagay hotay hein wo short circuit ho jain gy aur inverter ko nuqsan hoga

[@aaqibali9349]

Bhai es k kiyey minimum kitny panel required hain On krny k liyey?

[@Chobkar]

Minimum two.

[@Muneeb_Nasir]

AOA!!! aik problem aa rhi hai k mne inverter SUB mode main rkha howa aur grid sharing k doran light load pr generation nhn krta magr jese hi heavy load chalaen ya SBU mode main jaen ya wapda breaker off kr dein to generation shuru kr deta hai. Ye kis wja se ho rha???

[@Chobkar]

Hybrid Inverter sharing kartay hein. SUB mode mein solar utility and battery ka sequence hota hay magar hybrid inverter load k mutabiq generation karta hay. Ap is ko SBU pe rakhein aur ho sakay to breaker of Kar dia Karen. Breaker on hoga to ye sharing karay ga aur kyun k wapda stable hoti hay solar stable nahi hota to inverter automatically stable ko select Kar let's hay

[@Muneeb_Nasir]

@@Chobkar lekin ye pehle nhn ho rha tha jb batteries lgai hain tb se shuru howa. brother pehle maine isko batteries k bagher isi mode main chalaya tb ye solar se leta tha priority pr but ab ye issue srf smart load yani fans lights fridge grid sharing kro to solar se generation nhn kr rha magr heavy load yani iron ya A/C grid sharing k saath kro to solar se hi max power generate krta aur 100 watt wapda se leta

[@Chobkar]

@Muneeb_Nasir charging source priority aur time check Kar lein 99 aur 100 number setting

[@Muneeb_Nasir]

@@Chobkar wo 00 hain dono

[@Chobkar]

Setting number 99 ko SUB ya SBU Kar dein aur value 00 23 Kar dein aur 100 wali ko OSO kar dein aur wo bhe 00 23 Kar dein

[@AdilAli-yd7dx]

I have 54v lithium ion battery...At 60 no my voltage is set at 52v and at 63 no my voltage is set at 47.5v.But during load shedding at night,heavy load does not cut off at 47.5v resulting in a complete black...share your thoughts plz

[@Chobkar]

Have you checked setting No 61 and 62? These setting might have been making a conflict with 60 and 63

[@AdilAli-yd7dx]

@@Chobkar I have changed the settings of 60 and 63 only

[@Chobkar]

@AdilAli-yd7dx dear as far as I know it should work if there is no conflict of setting

[@Chobkar]

Oh dear. You have Lithium battery? If you have lithium battery then you set SOC not voltage. Means state of charge or percentage of battery instead of voltage now in tour case you set voltage but inverter thinks of the value as percentage so it thinks to cut off the load on 52% and start load at 47.5%. Set the percentage to 80 at 60 and 45 or 50 % at setting No 63

[@AdilAli-yd7dx]

@@Chobkar ok I'll do the same.What should be selected at no 5? LIB or LIC

[@khuzicrib5788]

Please tell me can we run this inverter on pv without wapda or battery,direct on pv only

[@Chobkar]

No hybrid inverter should be run without battery or wapda sharing ever. Same is the case with this inverter. It will run on sharing from either battery or wapda. All those KZbinrs claiming to run any hybrid inverter without battery are lying and not telling that ultimately it will fail. They are misguisinh the public for viewership only. We have to see the effects on the long run because no one buys costly inverter to run short time only. I would not recommend at all

[@khuzicrib5788]

@@Chobkar thanks brother also tell me the app which they recommended don't show many options like apps like solar man do, do u recommend any app I have 3 apps soalrpower energy mate and smart ess

[@Chobkar]

@khuzicrib5788 Watchpower app is recommended by the company

[@amirshahzad4643]

Brother 6 kw ka knox mai secnd out put on nh ho rhi or setting safe kerny py B 60 nb ki setting safe nh hoti is ki kya reason hy

[@Chobkar]

Setting kesay save Kar rahay hein? I have a video on how to save setting please consult that video for guidance

[@sameedaftabb]

Brother mere pas 585 k 8 panel lagay howay hain, lekin 2800 watt se zyda load ni uthaa rha 2800 py jaty hii screen py load 100% ho jata hai.... Aur har time wapda se 200 se 300 watt le rha hai iski kya waja ho sakti hai?

[@Chobkar]

Dear 585w panel actual mein 585 nahi hota ye lab k figures hein. Apka panel max 9-10amp current and 40v dy sakta hay Wo bhe peak time in optimal condition in real life it should be like 35vx9amp=315w now 315x8=2520w.now as per your given data it is giving you 2800w that I belive is very good generation. In other scenario 40x9=360w 360x8=2880w even then your system is generating max output. If you can check the amps of your panel then kindly check short circuit amp of your panels one by one. And check it for few seconds only and remember don't check them when connected in series and also check voltages of the panel one by one also. this way it will help you troubleshoot the problem l. First check the panels and also confirm your firmware version of inverter

[@Chobkar]

Ap apnay panels ka tilt angle and direction bhe check Karwa lein un sy bhe generation pe farq parta hay

[@FEW-YT]

brother aik jaga pr inverter jis diwar pr lga hai us diwar pr hath rakhny sy halka halka earth mehsos hota hai !!! inverter ko zameen me earth b kiya hai lekin phr b aisa q ho rha ha?

[@Chobkar]

Dear earth proper nahi hua hoga. Kitnay feet pe earth kia hay? Aur kia mechanism use kia hay earth ka?

[@FEW-YT]

@@Chobkar Apna whatsapp kindly share kr dien

[@FEW-YT]

@@Chobkar earth proper hai ! almost 30feet tk ha

[@Chobkar]

You can contact at [e-mail]

[@FEW-YT]

@@Chobkar 😁

[@ahssanmanzoor1818]

Bhai agar same rakhen gy to heavy load on off ziada ho ga aur apka heavy load jal bhi skta hy..

[@Chobkar]

Bhai mera to on of nahi hota 1month sy ooper ho gaya hay is setting ko.

[@ahssanmanzoor1818]

@@Chobkar apki setting k hisab sy to hona chaiye .. anyway ni ho raha to achi bat hy.

[@Chobkar]

@ahssanmanzoor1818 meray bhai ap is mechanism k baray mein clear nahi hein is leay keh rahay hein. Have load cut of tab he hoga jab battery discharge ho rahi hogi means apka wapda ya solar available nahi hay. Jab ye available nahi hein to it means ap bettery second load k cut of voltage k bad bhe use Kar rahay hon gy. Jab wapda ya solar availability hogi to battery second load automatically on ho jay ga uska battery k voltage sy koi taluq nahi hoga. J am sure ab apko mechanism samajh aa gaya hoga

[@ahssanmanzoor1818]

@@Chobkar theekh hy bhai men yeh kar k dekhon ga phir apko btaon ga... right now meny L2 cutoff 23 volt rkha hy aur 64 setting ko 27 volt rakha hy.. to jab tk battery again 27 par ni aati L2 start ni hota... dusri bat men wapda off rkhta hun din men... aur solar available hota hy lekin dhoop kam hony ki waja sy battery jab 23 par aati hy to L2 cutoff ho jata hy... solar current bi aa rha hota hy lekin kam hota hy...

[@qammerjavaid7996]

AOA brother mera inverter phly battery use krta gy jab full discharge ho jaye to charging start hote hy kia koi aese setting hy k SBU me rhty hovy shaam ko instead discharging agr battery full ho to wapda py transfer ho jaye ya jitne remaining ho wo wapda sy charge kr k standby rhy ta k jab light off ho jaye to battery backup use ho like UPS. PLZ guide

[@Chobkar]

Waslam dear ap inverter ko sub pe rakhein aur charging sirf solar sy karwain yani OSO in setting 16 and in setting No 100 set OSO to 00 23. Wapda breaker subah off Kar dein 5-5:30 k around and sham ko on Karen around 5-5:30pm. In this way apka inverter sara din solar and battery pe run hoga aur sath he usay charge bhe karta rahay ga. Sham ko 5 bajay k around jab ap wapda on Karen gy to apki battery with 10 minutes solar sy he charge ho jay gi aur apko wapda sy charging nahi karni paray gi because agar battery wapda sy charge karni hay to phir solar ka koi faida nahi bill to utna he ay ga

[@qammerjavaid7996]

@@Chobkar thank you so much sir for kind guidance. 1 guidline r kr den plz shaam ko jab solar incoming nahe aate to inverter phly discharge krta hy till end r pher wapda sy charging start krta hy jo k 2amp set ke hy wo enough charge nahe hota r raat ko agr light off ho jaye to backup nahe milta. S ka kia solution hy plz advise

[@Chobkar]

@qammerjavaid7996 ap battery solar pe charge Karen only solar OSO. Aur sham ko 5 bajay wapda on Karen within 10-15 sunset honay sy pehlay battery charge ho jay gi inshahallah. Battery charging amps 20 rakhein

[@qammerjavaid7996]

@@Chobkar i don't think even the installer can define or guide the way you have guided. Allah aap k lia hamesha asania ataa farmaye🌹

[@Chobkar]

@qammerjavaid7996 my pleasure dear

[@Gaming246-x6w]

Please make a video on your batteries backup time and which load u can run

[@Chobkar]

OK inshahallah

[@muhammadashla5463]

Assalam-o-alaikum sir mere pas abh issue ye aarha hai k battery full charge hone k bawajood thora sa load barhane pr inverter foran trip ho jata hai or battery bh bht jaldi drain horh hai

[@Chobkar]

Apki solar ki generation kitni hay aur kitna load daltay hein

[@bilaltahir3693]

Sir MRI 60 no ki seting nai change ho rhi ingenier kahta hy k by default is ki seting set hy ab nai change ho g Mera havy load cut out nai hota

[@Chobkar]

Engineer nahi hay Wo shakah Jo ye keh raha hay k setting change nahi hoti. Ap aik Kam Karen setting to restore factory setting Kar lein. 60 number setting change na honay ki waja ye bhe ho sakti hay k koi aur setting is sy conflict Kar rahi ho is leay change nahi ho rahi hogi

[@bilaltahir3693]

@@Chobkar ok try karta hn

[@heellal]

Set 5 number setting to user, than save 63 setting and than save 60 setting that should be less than 63

[@oldisgoldjhankar9476]

Plz guide this setting for zeonic 4.5 kw diamond model

[@Chobkar]

This setting is usable for every inverter that runs on 24v setup

[@ahssanmanzoor1818]

@@Chobkar is sy battries healt par koi farak pary ga....

[@imranmalik6902]

23 Ampere discharging ho Rahi ha par volt Kam NAHI ho Rahe, mere 4 batteries ke tezi se Kam ho hate han, Konsi batteries lagai hean

[@Chobkar]

Phoenix tall Tubular TX1800

[@abdullahabdull6828]

Sir Knox 5600 ko battery aor Wapda k bagrai kesy chalaye. Mainy ajj wapda aor battery Breaker off kyay to Second Load Off hogaya. aor battery breaker off krny k baad bhi Inverter ki screen pr Battery voltage 27.0 likha araha hai

[@Chobkar]

Dear hybrid inverter ko kabhi bhe sharing k baghair nahi chalatay Wo sharing wapda sy ho Ya battery sy. Why do you want to run it without battery? I would not be able to bear torque load of your appliances and will generate fault code 4 that would be overload with red led light and continuous beep. As far as your second part of the question is this inverter is designed with capacitors and other electronic components that store charge for few minutes if you switch off all the Input of this or any hybrid inverter still it has charge stored that would light the LED screen for few minutes

[@abdullahabdull6828]

@@Chobkar sir its is draining battery 20 to 30 ampere discharging

[@abdullahabdull6828]

Aor inverter k sath jo Dc fuse hota hai wo inverter mai kha pr lagta hai

[@Chobkar]

Wo extra hay uski abhi zaroorat nahi hay Wo inverter k andar laga hota hay jahan sy pv input jati hay

[@Chobkar]

What is firmware version of your inverter?

[@FEW-YT]

ye inverter infinix max hai?

[@Chobkar]

No, KNOX PV5600

[@zeeshanarif6637]

Bahi in inverter Ka WiFi kasay connect kartay ha smart life application Ka sath kindly is pr be aik video Bana day.

[@Chobkar]

G inshahallah after Aashur I shall upload the video with step by step guide

[@Chobkar]

Iski App watch power hay.

[@zeeshanarif6637]

@@Chobkar bahi maray pass Jo inverter ha vo smart life application say connect hotah ha lakin mouj say connect ni ho pa Raha. Flash company Ka inverter ha vo same is tarah Ka ha Jo ap video ma Dekh rahay ho.

[@Chobkar]

@zeeshanarif6637 OK I shall upload video today. Procedure is almost same I think

[@zeeshanarif6637]

@@Chobkar jazak Allah brother ❣️

[@Ahmad_Editer]

Bhai ya good inveter ha????

[@Chobkar]

G

[@farhansh-j3h]

Brother many Sath wapda shre ki hi but wapda sy he curnt use rehta hi batry b Sath lagi hi semjh nhi aa Rahi kia kro

[@Chobkar]

Ap battery k sath sharing Karen

[@farhansh-j3h]

@@Chobkar batry b lagi hoi hi but wapda sy curnet leta hi solar sy nhi leta wpda of kr do to solar aur batry use krta hi mjhy problem hi jab sun 🌞 na ho to solar off ho jata is lie wpda Sath shre Kiya phr b wpda he use Hoti solar nhi

[@Chobkar]

Change setting to SBU

[@lovebirds9291]

Solarmax 4 kw Crwon 8.2 kw Same setting inki 60 numbr py volts save nai ho rhy

[@Chobkar]

4kw is 24 volts setup and 8.2kw is 48v setup. 4kw starring to same video wali hogi but 8.2kw mein 42 ya 43v hogi

[@MajidKhan-wy2bl]

Knox 5600 jab trip hota hai tu screen pe 15 number option beep aate hai ye kya masla hai?

[@Chobkar]

Ap inverter without battery ya wapda sharing chala rahay hon gy. Jab solar sy input low ati hay aur consumption load Zyada hota hay to ye 15 number error dy k trip Kar jata hay. Isko sharing lazmi dein wapda ya battery sy

[@YasirYasir-gi5hh]

💖

[@naqqashsarwar138]

Same setting in knox pv8000?

[@Chobkar]

Yes sir

[@h.a.hamza345]

Knox pv 8000 48 volt hai​@@Chobkar

[@Chobkar]

@h.a.hamza345 bhai ap kaunsay voltages ka puch rahay hein

[@muhammadalibhatti6503]

اسلام علیکم ورحمتہ اللہ وبرکاتہ بھائی جان انویٹر کے ڈسپلے میں جو نمبر شو ہو رہے ہیں برائے مہربانی ہر نمبر کا مطلب بتا دیں شکریہ

[@Muneeb_Nasir]

is main masla ye aa rha hai k same 23v 60 aur 63 set nhn ho rhi kam az kam 1 ka difference dena prh rha hai

[@Chobkar]

Ap watch app k though inverter ko aik dafa reset Kar lein phir ho jay gi. Maybe apki koi aur setting value aisi hay jis ki waja sy ye value set nahi ho rahi. Ya phir aik value 23 hay to doosri 23.1 Kar lein

[@Muneeb_Nasir]

@@Chobkar ye bta do brother k jb wapda off krte hain to inverter batteries se 100 watt kiun leta continuously yani 4 5 ampere ki discharging krta

[@Chobkar]

@Muneeb_Nasir it is natural it will not drain your battery. It is designed like this by the original designer which is voltronic. no need to worry about it. It will automatically charge the battery as well. It uses the battery because that way it will not damage the battery plates and and socondly we continuously switch of and switch on different appliance and during the switch on process every appliance uses torque load that is managed by the inverter through sharing, either it is wapda or battery. So now a days if we look at electricity price it is better to be shared with battery instead of wapda

[@Muneeb_Nasir]

@@Chobkar another question today when i was using wapda sharing sir it is not sharing like it used to and there is a sudden decrease but it is working fine when on batteries. This did not happen before??

[@Chobkar]

@Muneeb_Nasir it is because if setting No 1. Setting No 1 is SUB means solar utility battery, USB means utility solar battery and SBU solar battery utility. These setting set the sequence of energy source check setting No 1

[@scrapstation6823]

Look like so many issues or manual handling in KNOX inverter.

[@Chobkar]

Every electronic device has its own problems but the more facilities the device has the more complex it becomes

[@Affan_Nasir]

Assalam-o-Alaikum

[@Chobkar]

Waslam

[@Affan_Nasir]

@@Chobkar My name is AD Nasir

[@Affan_Nasir]

Renala Khurd

[@Chobkar]

Mashahallah. AD nasir sb kesay hein. Allah pak sehat o salamti ata farmain

[@Affan_Nasir]

Plz contact me

[@sajidnaeem3278]

Assalamu alaikum meri bhi 60 number ki setting save Nahin Hoti vah default 21 per rahti hai

[@Chobkar]

Dear ap apni setting ko reset Kar lein app k through

[@Zafarali-zm8ef]

63 ki setting pehly kr Le bde me 60 ki setting kr Le ho jayega

[@alijee6]

Ap ka number kya he

[@Chobkar]

For any query you can contact at [e-mail]

[@MuhammadAmin-d7l]

Salam If zI set option 60 on 23 volt My battery will cutoff on 21volt (night) So can I set setting 60 and 63 on 26 voltage if my floating volt is 27

[@MuhammadAmin-d7l]

Salam If I set option 60 on 23 volt My battery will cutoff on 21volt (night) So can I set setting 60 and 63 on 26 voltage if my floating volt is 27

[@Chobkar]

Dear if you want to instantly cut the load then yes go ahead because 27v are jus to make battery hold 25v which are actual voltage of any battery lithium or lead acid or gel no battery holds 27v in actual so if tou set 26v then your inverter will instantly cut the load because on battery it shall instantly drop to 25v and load will be cut

[@MuhammadAmin-d7l]

Salam If zI set option 60 on 23 volt My battery will cutoff on 21volt (night) So can I set setting 60 and 63 on 26 voltage if my floating volt is 27

[@Chobkar]

Sorry can't understand your question