Tap to unmute

How To "Ebonize" A Fretboard With Stains

  Рет қаралды 87,491

IP Guitars

IP Guitars

Күн бұрын

Пікірлер: 327
@spacialinstallations
@spacialinstallations Жыл бұрын
I just did a Squier Stratocaster neck. I used black leather dye and at first, I thought I'd gone too dark but after soaking in and buff all the excess out it's got this great, dark dark chocolate thing going on. Love the video. Keep up the good work.
@IPGuitars
@IPGuitars Жыл бұрын
Awesome! Great that it worked out well. And thank you :)
@trevorgwelch7412
@trevorgwelch7412 9 ай бұрын
Ebony is the ultimate fret board material . Like a violin .
@rossauce12
@rossauce12 12 күн бұрын
Real ebony is
@luketanner7638
@luketanner7638 2 жыл бұрын
THIS is how you do it! Never understood people who sanded the fretboard. If you can oil it, clearly the wood is unsealed.
@IPGuitars
@IPGuitars 2 жыл бұрын
Exactly, just need to remove that oil and that is an easy process in its self :)
@xrenox1
@xrenox1 2 жыл бұрын
Some Fender necks have poly coated fretboards such as on my Mustang, so had to sand the poly back before I could darken.
@DanielRodriguez-eh1qd
@DanielRodriguez-eh1qd 10 ай бұрын
Depending on how course wood is also determines how much of the stain it will absorb. For instance if you’re staining wood, sanding it under 300grit will help it absorb more stain and in turn appearing darker than a fretboard that has been sanded to say 1000grit.
@IPGuitars
@IPGuitars 10 ай бұрын
Absolutely right
@caretheis6779
@caretheis6779 3 жыл бұрын
90%+ isopropyl alcohol is really good at drying the fretboard too and much safer since it vaporizes.
@IPGuitars
@IPGuitars 3 жыл бұрын
Exactly the case, good shout
@RavenRedwood
@RavenRedwood 2 жыл бұрын
Breaks down those gross organic oils too 👌
@Zoso981
@Zoso981 Жыл бұрын
Much better than lighter fluid
@bajista6053
@bajista6053 3 жыл бұрын
I need this. I appreciate you taking the time to make this video. Thanks!
@IPGuitars
@IPGuitars 3 жыл бұрын
Thanks for checking it out! :)
@Baci302
@Baci302 Жыл бұрын
That really came out very nice. What a big difference!
@IPGuitars
@IPGuitars Жыл бұрын
Thank you! Yeah, made quite the difference
@6stringbass460
@6stringbass460 3 жыл бұрын
I ordered an all black guitar with a super pale fretboard, thanks
@normbarrows
@normbarrows 2 жыл бұрын
Not quite ebony, but still an improvement. They make special stains and dyes just for doing extra dark black shades, one of those might work better. I think minwax makes one. I've used Keda wood dyes to tint rosewood fretboards on multiple builds. But their "black" is a mere dark indigo.
@IPGuitars
@IPGuitars 2 жыл бұрын
I've heard of the minwax one too yeah! And you're absolutely right. This is perhaps a matter of much more "darkening" than a 100% ebonising process.
@normbarrows
@normbarrows 2 жыл бұрын
@@IPGuitars I'm still looking for the perfect solution. So far from vids I've seem online, india ink seems to give the best results - even better than Minwax true black.
@mercedesescobarmusic
@mercedesescobarmusic Жыл бұрын
@@normbarrows I looked into india ink because of your comment, and it seems that in terms of looks it works, to the point that StewMac sells it. However, I'd be a bit worried that it's not waterproof (it's basically fountain pen ink). Would that mean that the ink would transfer if sweaty fingers touch it?... Not sure, but I also wouldn't want to find out with my instrument. I'm looking for a solution as well... It occurs to me that maybe it it's sealed with oil afterwards it would work though. Have you tried that?
@normbarrows
@normbarrows Жыл бұрын
@@mercedesescobarmusic No, I've pretty much stuck with aniline dye (Keda) mixed with water, not alcohol. I'll use it to tint a fretboard or dye a maple fretboard brown - for example. Despite being water soluble only a little rubs off when applying oil. These days I'm into lightening, not darkening fretboards: kzbin.info/www/bejne/eGTLcotojtyqgK8
@Ben-ll3iy
@Ben-ll3iy 2 жыл бұрын
How long does the darkness stay on the rosewood fretboard? Is it gonna stay forever for only one time?
@MetalMayhem1978
@MetalMayhem1978 2 жыл бұрын
I have fairly big fretboard markers. Do I have to stain around them or just go over them? Will it come off the Pearl? Or fake Pearl. Whatever they are
@IPGuitars
@IPGuitars 2 жыл бұрын
You can stain over on top of the markers. HOWEVER, I recommend you test this on a small part somewhere to see if you can then wipe that marker clean with a cotton swab (with water or IPA depending on your stain). It can depend on what material your inlays are and what stain you use. Good to make sure that you can clean them up before doing the entire board :) If you can't remove the stain off the inlays (rare, worst case scenario) you could try to mask the inlays with masking tape prior to staining. Here you'll need to make extra sure that you burnish the tape down, so that you won't get any leakage. But I'm fairly sure that you can wipe away most stains off of your inlays :)
@frankiechan9651
@frankiechan9651 4 жыл бұрын
Wouldn't mind seeing a stain vs the more traditional steel wool in vinegar ebonising. I thin the steel wool is a darker black but seems to flatten details. Stain seems to keep the grain more alive.
@IPGuitars
@IPGuitars 4 жыл бұрын
Yupp, something I want to try as well. Next time I do it then for sure!
@Gjax400
@Gjax400 2 жыл бұрын
Is there a video of this? I got a really odd grain of wood and while I want it darker I would like a method that doesn’t make it so prominent.
@IPGuitars
@IPGuitars 2 жыл бұрын
There's tons of videos out there about this :) search for "steel wool vinegar stain" and there's a good selection of people using it for different applications. The results also vary quite a lot between different species of wood.
@Gjax400
@Gjax400 2 жыл бұрын
@@IPGuitars Thanks a lot for the help!
@Nera-Red-93
@Nera-Red-93 2 жыл бұрын
Sweet! I'll be doing this to my a couple of my basses once it's time for them to get new strings.
@IPGuitars
@IPGuitars 2 жыл бұрын
Awesome! Lemme know how it goes
@Nera-Red-93
@Nera-Red-93 2 жыл бұрын
@@IPGuitars will do!
@JosebasOficial
@JosebasOficial 8 ай бұрын
⁠@@Nera-Red-93You didn’t let him know how is it going dude wtf
@gmel1084
@gmel1084 Жыл бұрын
Stained my binding pretty good with this. What’s the best way to get the black dye off my binding?
@IPGuitars
@IPGuitars Жыл бұрын
The easiest is with spirits and a cotton swab, if that doesn't remove the stain the best way is by scraping it off. You can use a razor, scalpel, or similar to do this.
@Bassic778
@Bassic778 2 жыл бұрын
Very cool!!!!! I would like to have this done to the rosewood fretboard on my bass!
@theheadlessguitarist7
@theheadlessguitarist7 2 ай бұрын
So how would you clean the stain off the neck? I want to do this to my RGA but I want to do the sides of the fretboard while leaving the factory look of the maple neck as it is.
@IPGuitars
@IPGuitars 2 ай бұрын
First also make sure to sand off any clear coat on the side of the fretboard as it more than likely has some. But honestly, if you're worried about spilling onto the neck: masking tape is your friend. Mask off the part you don't want stained and burnish down the edge with your fingernail. When staining, make sure your applicator (rag, brush, sponge) isn't too wet. Rather multiple light layers than making a mess with too much too quick👌🏼 Also, stain won't really stick to lacquered surfaces, so if there is some spill, you should be able to clean that off relatively easily :)
@theheadlessguitarist7
@theheadlessguitarist7 2 ай бұрын
@@IPGuitars thanks bro!
@aldanino
@aldanino 10 ай бұрын
Thank you for a very instructive video - following your method I have just finished ebonizing an indian laurel neck.
@IPGuitars
@IPGuitars 10 ай бұрын
Thank you for watching and glad to hear you got good results!
@johnriley8314
@johnriley8314 3 жыл бұрын
Very cool stuff man....i'll have to give it a try sometime!!!!
@gregandtonya5693
@gregandtonya5693 2 жыл бұрын
Does it Ebonize the sound also ?
@maxsahni6349
@maxsahni6349 Жыл бұрын
Would this stain work for the full neck? I am using StewMac’s Liquid Stains over the entire guitar and was hoping to do a silver grain fill.
@IPGuitars
@IPGuitars Жыл бұрын
Of course! This stain is meant for any part of the guitar. Usually you don't really stain a fretboard, so I was just showing how it would work if you did :)
@scottdunn2178
@scottdunn2178 2 жыл бұрын
Will this stain the binding on my SLX Soloist? What about the imitation inlays? Would love to dye the laurel fingerboard black 👍
@IPGuitars
@IPGuitars 2 жыл бұрын
Great question! You can easily clean up the stain from the binding by just scraping it clean with a razor or scalpel blade :) if the binding is under clear coat then easy enough to wipe off with a guitar cleaning product or isopropanol. You can apply the same method to the imitation inlays. If you clean the inlays with the alcohol, just use a cotton swab to do so. Lemme know how it goes if you go for it!🤘🏻
@scottdunn2178
@scottdunn2178 2 жыл бұрын
@@IPGuitars Thanks. Will do 👍
@Austinomical
@Austinomical 3 жыл бұрын
How would you dye the sides if you didn't want to get it on the guitar neck? Mine is finished with true oil, and I don't want to darken it or mess it up. Thanks!
@IPGuitars
@IPGuitars 3 жыл бұрын
Good question! Just apply masking tape to the neck :) make sure to burnish down the edge of the tape (with your fingernail), so that you'll avoid stain leaking through gaps. What also helps during application is if you do not wet your applicator too much. Just apply the stain in light layers instead of a whole lot at once (which might cause some issues). If you're going to use water-based stain then it shouldn't even stick to an oiled surface, so clean-up should be easy if it does get on your neck.
@trance9158
@trance9158 6 ай бұрын
Excellent video... going to do rosewood fretboards on all 3 of my basses
@IPGuitars
@IPGuitars 6 ай бұрын
Sweet! Lemme know how it turns out
@Jimsclips34
@Jimsclips34 Жыл бұрын
do you have to remove the neck to do this?
@IPGuitars
@IPGuitars Жыл бұрын
No you don't :)
@paulcody8973
@paulcody8973 Ай бұрын
did you do the backside of the neck also?
@IPGuitars
@IPGuitars Ай бұрын
I did not. Doing the back of the neck would have required removing the old finish
@pablomartinvazquez
@pablomartinvazquez 2 жыл бұрын
Try Iron acetate instead. Wood must be sanded. Wont affect the dots but will penetrate on wood up to 2-3mm. 2 coats would do, in most types of wood. It allows you to see the wood grain, and if the guy plays a lot and wears the fretborard, the underlaying clear wood wont appear! In addition: It´s so cheap. . . . (Clear vinegar + iron wool + time) Greetings
@IPGuitars
@IPGuitars 2 жыл бұрын
Oh absolutely a great trick! One that I have done way back when still in school, but never on this channel. I'm reluctant of buying wire wool again, so why I haven't done it in a while. But very good shout this!
@MarkWright-206
@MarkWright-206 Ай бұрын
Looks great but did it ware off when you started to play??
@IPGuitars
@IPGuitars Ай бұрын
The stain stayed on well! Key here was the application method, and the fretboard oil also kinda "locks it in" even more.
@marcorinaldi7349
@marcorinaldi7349 2 жыл бұрын
Nice!! What do you think about using tinted tru oil instead of this product? Like tru oil + universal dye
@IPGuitars
@IPGuitars 2 жыл бұрын
I mean technically, you could just as easily use something like that, if you have a ready mix. While commonly you wouldn't use an oil that hardens on darker fretboards, there is no REAL reason as to why you can't do that :)
@marcorinaldi7349
@marcorinaldi7349 2 жыл бұрын
@@IPGuitars I'm thinking about tru oil because since it harden i think it will not dye my finger at all.. good idea?
@IPGuitars
@IPGuitars 2 жыл бұрын
I mean once again, yeah a good point. While the point of this process is to try and remove all the pigment that lifts off, there might be some residue left in the beginning. With truoil the same principle applies, it's just that the final finish is different :)
@EmmanuelVassilian
@EmmanuelVassilian 11 ай бұрын
Hello again bro, I did this ebonizing procedure on my Ibanez, but mine was done with Indian Ink. It turned out pretty well and looks great, one thing though, after playing and getting sweaty hands, I have some Ink/Stain coming off and marking on my fingers. Question is, is there any sort of coat that I can apply after the Ink to prevent this from happenning? Thank you in advance.
@IPGuitars
@IPGuitars 11 ай бұрын
Did you apply some oil for the fretboard? When you do remember to let it sit for a bit and then rub off the excess. This will also remove any loose pigment
@jesterraj
@jesterraj 3 ай бұрын
What about wood stain can that work?? Minwax
@nighthawk9532
@nighthawk9532 9 ай бұрын
Does this work on a maple fender neck? I have a black fender Stratocaster that has a maple neck and I just can’t stand the look because it’s a black guitar so I want to make the neck black
@IPGuitars
@IPGuitars 9 ай бұрын
Maple necks are usually lacquered (definitely so if it's a Fender), so your only option if you want to stain it is to strip it down to bare wood, which means sanding, scraping, and if you want it done right refretting (pulling off the frets, sanding down the entire neck to wood, staining, refretting, applying clear coat). So unfortunately, not as easy of a task. Or alternatively, scuff sanding the neck and then painting it black, before applying clear coats again.
@ccook31
@ccook31 3 жыл бұрын
While there are generational and subjective differences in what we think looks 'expensive' (black guitars are like white cars IMHO)... this was a great idea. Nice vid, thank you!. I also wonder what effect longer term wear is going to have.... an inverse result of those worn maple boards (think Buchanan Tele ...)? Speaking of maple ... if/when I try this... I may consider a clear thin lacquer coat to go for that ebony sheen. Thanks again.
@IPGuitars
@IPGuitars 3 жыл бұрын
Thanks for liking the video! :) When it comes to wear it won't quite be as like worn down maple. Lacquer wears down/chips off the top of the wood, meanwhile the stain -in this case- soaks into the wood a bit deeper. It'll wear, but the more open grain will remain darker. And sure, you can apply a clear coat if you want sure, but getting that sheen might be a good bit less work by sanding with higher grit sandpaper like from 800 upwards to even 2000. Trying out on scrap wood is always great if you can, or if you're up for it, experimenting with a guitar that you're cool with doing so to :)
@ccook31
@ccook31 3 жыл бұрын
@@IPGuitars thanks, the lacquer would be clear on top of the stain, not instead-of, but that's a good heads up... didn't know that. I'll research whatever they use on strats/teles.
@IPGuitars
@IPGuitars 3 жыл бұрын
Fender -for example- use nitrocellulose lacquer on theirs :) if that helps
@ccook31
@ccook31 3 жыл бұрын
@@IPGuitars hmm... ok, that's what I meant. I need to find out if my definition of lacquer is the same as nitro.. lacquer. In any case... back to the point... a clear 'fender' coat on top of the black dyed fretboard. I'll be doing it on a cheap neck anyway... thanks for your clarifications
@abr00ky
@abr00ky 11 ай бұрын
Can I do this with amaranth on my Jackson?
@IPGuitars
@IPGuitars 11 ай бұрын
I don't see why not. It's usually a bit oily of a wood, so cleaning it up thoroughly beforehand is definitely a must.
@abr00ky
@abr00ky 11 ай бұрын
@@IPGuitars thank you!!!
@chrybrstLesPaul
@chrybrstLesPaul 3 жыл бұрын
Head's up, you're not getting rid of contrast by scraping the dots, you're INCREASING contrast because you're increasing the depth/difference between light and dark tones. For example, a black and white checkerboard has 100% contrast, where a black and grey checkerboard has we'll say 50% contrast; since the grey isn't as light as the white, you're reducing the difference between light and dark tones. So by scraping the stain off the dots and making them more light/white/vibrant/pop you're increasing the contrast between the dots and the board. Just wanted to let ya know!
@IPGuitars
@IPGuitars 3 жыл бұрын
Wow, did I really say I was getting rid of contrast?🤦🏼‍♂️ What a brainfart, because -as you also said here- that makes no sense. My bad, sometimes my brain thinks two different things at a time and it comes out as just a combination of nonsense. Probably in this case "Removing stain off the dots to create contrast" became "removing contrast by removing the stain" :D
@IPGuitars
@IPGuitars 3 жыл бұрын
Ah alright, thanks! Good to know :) honestly, knowing me, I wouldn't have been surprise had I messed that up
@dandicerbo8570
@dandicerbo8570 Ай бұрын
I believe when he said, "Using words like much needed contrast when I've basically made sure to get rid of contrast", he was referring to getting rid of contrast by getting rid of the contrast between the black guitar and the neck that was too light. He was getting rid of that contrast by staining the neck to make it darker and more the same color as the body. I think he was acknowledging the irony and then made the distinction between contrast and contrast that works. The bright white dots on the dark fretboard is a contrast that works while the contrast between the lighter shade of the neck and the darker shade of the black body is a contrast that doesn't work and therefore THAT contrast had to be gotten rid of by staining the neck.
@neko_n3k0
@neko_n3k0 Жыл бұрын
Recommend dye brands, types of dyes for new zealand treated pine and purple heart wood?
@IPGuitars
@IPGuitars Жыл бұрын
I have used Crimson Stunning Stains and TLC Guitar Goods suStains. Those are ones I have experience with. They all work pretty much the same and come as either water or spirit-based, and mix well together within the brands. And together as well oddly enough. The kind of final coat you are looking for really depends as well. Sprayed on clear coats, then you're pretty good with either. With Oil, CG stains go either way. Some of the stains lift the pigment off A LOT during oil application (blues and black spirit-based). But as a type of stain, I would definitely recommend water-based if you're doing stuff at home because a) it's easy and b) they don't stink😆 Water-based just dries slower, but are super easy. Purpleheart is a rather oily wood, so it might require spirit-based, which are also easy, however a) need ventilation due to fumes b) need to dispose of rags safely.
@neko_n3k0
@neko_n3k0 Жыл бұрын
@@IPGuitars thank you
@patriksvensson-z2i
@patriksvensson-z2i 4 ай бұрын
Were can i buy the black stain youre using to ebonize the fretboard? I live in sweden.
@IPGuitars
@IPGuitars 4 ай бұрын
The stain I used is Crimson Guitars Stunning Spirit Stain, so from crimsonguitars.com/shop However if you want to rather order within the EU (like myself from Finland), TLC Guitar Goods has their stains that are great as well
@Morgcha
@Morgcha 10 ай бұрын
Does this work for the back of the neck also? I have a Fender p-bass with maple neck and ebony fretboard and I would like to get a darker neck as the headstock and the body are black.
@IPGuitars
@IPGuitars 10 ай бұрын
For the neck itself you will need to strip it to the bare wood. After that you can stain it and apply a finish. You won't really be able to put stain on top of a lacquered neck. Other option is of course paint.
@Benny-br5xk
@Benny-br5xk 2 жыл бұрын
Slightly unrelated, but where did you get that yellow lotus shirt?
@IPGuitars
@IPGuitars 2 жыл бұрын
Bought the vinyl/t-shirt bundle when Empath was released :)
@quillaume2390
@quillaume2390 6 ай бұрын
Hi, nice info about staining. Looks very good. What is exactly the drying time before a second layer...?
@IPGuitars
@IPGuitars 6 ай бұрын
Thanks! And drying time really depends on what you use. Spirit-based or water-based and how much you put on. Water-based will dry slower, spirit-based will dry quicker. But the more you put on the longer it will take to dry. You can see or feel when it is dry. A good rule of thumb: rather have many light coats that one really heavy coat to build up the finish you want.
@quillaume2390
@quillaume2390 6 ай бұрын
@@IPGuitars Thanks. What drying time did you use on this guitar with this Crimson Stain....?
@IPGuitars
@IPGuitars 6 ай бұрын
Hard to recall, but if memory serves this was the spirit-based so I wanna say anywhere between 5-20min between layers. I think I put the oil on like atleast 8h later.
@quillaume2390
@quillaume2390 6 ай бұрын
@@IPGuitars Thanks again. I am still thinking about which stain could be the best. Spirit based or water based stain (for the the Fretboard). I want to use the stain for an old classical guitar which i have sanded to bear wood ( Fretboard).
@IPGuitars
@IPGuitars 6 ай бұрын
Up to preference really. Most of the time I like to use water-based because they don't smell, so easy to work with even in an apartment building
@Visionism
@Visionism Жыл бұрын
If you left the stain on the inlays longer would it dye them eventually or would it just end up being scratched off by the strings?
@IPGuitars
@IPGuitars Жыл бұрын
Great question! The stain would not actually properly "stick" onto the inlay material and would eventually rub off from string friction.
@MrNameless0shelter
@MrNameless0shelter 2 жыл бұрын
hi dude, would colour fade over these years? Or would it get a bit colour on your fingers? I would like to do the same thing with my guitar..thanks
@IPGuitars
@IPGuitars 2 жыл бұрын
Great questions :) 1) it really depends on the stain and how it was applied. Many woods also darken with age, so age might actually be beneficial to how dark the board will be. 2) as long as you apply the stain on a clean and dry fretboard and let the stain seep into the grain a good bit, you should be fine. Also with the application of the fretboard oil and buffing all the excess off you will also lift off all the pigment that was just left on the surface. Once again, might depend on what stain you use :)
@ejmusicofficial
@ejmusicofficial 3 жыл бұрын
Does the stain rub off on fingers when playing?
@IPGuitars
@IPGuitars 3 жыл бұрын
If you've cleaned and dried the fretboard properly then no :) at first with oil added, some pigment will lift off, but if you just rub out all the excess oil and buff it up, it will be just fine.
@RadGuitars
@RadGuitars 4 жыл бұрын
Hi, Why didn't you sand the fretboard before staining?
@IPGuitars
@IPGuitars 4 жыл бұрын
Heya, to sand the fretboard properly I would've needed to pull the frets and refret it. Also, I didn't need to :) cleaning it up and removing the excess oils on it are more than enough to get the stain to stick.
@muizzsaleemawan
@muizzsaleemawan 3 жыл бұрын
That is beautiful, gonna do sth like this once I get my electric guitar. Probably not ebony cuz the fretboard is maple
@IPGuitars
@IPGuitars 3 жыл бұрын
Thank you :) and awesome! Atleast maple opens up a whole variety of color options for you. Just make sure that the maple fretboard isn't lacquered, as that would require a bit more work than described in the video.
@preston_4824
@preston_4824 3 жыл бұрын
will this have the same effect on pau ferro?
@IPGuitars
@IPGuitars 3 жыл бұрын
Should do, once again, just need to be sure to remove any excess of oils before you stain. Of course results always vary, due to grain patterns, but you can always add a few layers. Pau Ferro is pretty dark to begin with, so you should be just fine.
@IPGuitars
@IPGuitars 3 жыл бұрын
Should do, once again, just need to be sure to remove any excess of oils before you stain. Of course results always vary, due to grain patterns, but you can always add a few layers. Pau Ferro is pretty dark to begin with, so you should be just fine.
@GianlucaImprotaPT
@GianlucaImprotaPT 8 ай бұрын
So wait, you don't have to sand the fretboard down before staining it? I watched many tutorials saying that if you don't sand it, the wood won't take the stain. Honestly I would like to avoid sanding
@IPGuitars
@IPGuitars 8 ай бұрын
No sanding required. Rosewood fretboards (and the like) are usually only treated with a fretboard oil. This can be removed with alcohol. For a maple board however, those are usually lacquered and will require sanding.
@mboyer68
@mboyer68 Жыл бұрын
Totally agree with the ebony. How did the stain last? When you showed it at the end, it looked as if a bunch came off during oiling / conditioning. If you can take figure out how to stain fretboards you could make a business out of it because most of the legal ebony left is very low quality. Even on brand new Taylors. Thank you for making the video:)
@IPGuitars
@IPGuitars Жыл бұрын
The fretboard is still looking as good as it did at the end of this :) all the pigment that came off toward the end was the surface pigment that hadn't seeped into the wood at all.
@mboyer68
@mboyer68 Жыл бұрын
Cool! Thank you for the reply. Do you know if any reasons why you wouldn't want to stain a fretboard? Like is someone gigs it outside, down south in the heat? Do you think sweat would make it run even months later? Thank you:)
@IPGuitars
@IPGuitars Жыл бұрын
Well, the goal is to use the stain so that you get it to seep into the wood and remove any of the excess pigment that doesn't do so. So that once you oil the fretboard pigment won't lift off anymore. Even in the scenarios you mentioned.
@travelingman9763
@travelingman9763 2 жыл бұрын
After removing frets and filling in a few chips on an ebony board..should I use a Ebony stain to hide scratches..discolorations? Subscribed
@IPGuitars
@IPGuitars 2 жыл бұрын
That actually is not a bad idea! Go for it, atleast it'll give it a little more uniform look
@travelingman9763
@travelingman9763 2 жыл бұрын
@@IPGuitars I ended up sandpapering
@uria702
@uria702 2 жыл бұрын
That’s a really really good job
@IPGuitars
@IPGuitars 2 жыл бұрын
Thank you :)
@dasbo1fan
@dasbo1fan 2 жыл бұрын
Also I'm doing it on a bright Maple Fretboard. U can see my stroke pattern and it looks bad. Will this fad or is there a proper stroke pattern to do? I did the little circles like u did in the video
@IPGuitars
@IPGuitars 2 жыл бұрын
Seeing stroke marks is normal, especially if you've applied only one or two layers on a light colored wood. Just means that you need to blend the stain in a little more. I did little circles, but unfortunately didn't explain that quite well enough, so: During application of the stain, what you want is a uniform finish. Depending on the brand of stain, your results may vary, so a test piece is always a good idea if you have access to one. Essentially in the video I do little circles to wipe on the stain as a way to rub in the stain into the grain. During repeated action I gauge how the stain blends into itself and aim to get rid of any stroke patterns. Wiping off excess stain is really important, so you can do the final wipes with the grain to try to even everything out. You may need to do several layers, so with each consequent layer, you can see that the stain starts to get to a more uniform finish. Keep up this process until you have your desired color. If the stroke patterns are too prominent even after a new application, you might need to lightly sand between layers (400-800 grit, REALLY lightly). If the stain seems to just move on the surface of the fretboard and not seep into the grain, you might need to make sure that you have prepared the surface properly. Especially with maple boards that could have a clear coat on them as stain will not penetrate that.
@promessemasvosve8893
@promessemasvosve8893 11 ай бұрын
Hey man thanks for the video. Do you recommend a water-based stain or an oil-based one
@IPGuitars
@IPGuitars 11 ай бұрын
Thanks for checking it out! And honestly, it is up to preference of working. As I work out of the spare bedroom of our apartment, water based stain is my go to because there are no fumes to worry about, oil based and spirit based are great if you have great ventilation and you like the workflow.
@promessemasvosve8893
@promessemasvosve8893 11 ай бұрын
@@IPGuitars Thanks very much man
@BagusWibisono
@BagusWibisono 2 жыл бұрын
Hi, are this still black till now? Is it permanent?
@IPGuitars
@IPGuitars 2 жыл бұрын
Stil black, but it isn't permanent as it will wear with play eventually.
@daobinchen4018
@daobinchen4018 7 ай бұрын
How do you do this without staining the inlays?
@IPGuitars
@IPGuitars 7 ай бұрын
Carefully. You could apply the stain with a brush. Or clean the inlays with isopropyl alcohol and cotton swab
@MarkShian
@MarkShian 2 жыл бұрын
When you sand it if leveling the fretboard will it go back to original? Also will the stain come out on your fingers as you're playing the guitar?
@IPGuitars
@IPGuitars 2 жыл бұрын
If you need to sand the fretboard after staining, it will of course sand some of the stain as well and you will need to reapply. So if it's a process that needs doing, do it before staining :) The stain won't come off on your fingers while playing if done correctly. So make sure to wipe off any excess pigment on the surface and when your oil the fretboard, removing the excess oil should remove the loose pigment too and will protect both the wood and the stain better from sweat.
@collisw8302
@collisw8302 Жыл бұрын
Great video! I’m planning on staining my SGs neck but I’m worried about damaging the paint on the back of the neck - is there a risk of that?
@IPGuitars
@IPGuitars Жыл бұрын
Great question. You should be just fine, stains usually won't stick to clear coat/paint. But you can always just use masking tape to mask off along the side of the fretboard if you just want to make it cleaner for yourself :) The key is not to use too much stain at once. The more stain you have, the more mess you're going to make if it runs all over the place.
@lehrgangswerk
@lehrgangswerk 3 жыл бұрын
My rosewood fretboard was finished with true oil. Can I use the stain directly or do I have to sand it down before? Does the stain gets in the skin of the fingertips when playing?
@IPGuitars
@IPGuitars 3 жыл бұрын
You'll need to get rid of the oil first, so that the stain will stick. Denatured alcohol, lighter fluid, or fretboard cleaner of sorts should be enough to remove it. Once you've applied the stain, be sure to apply some fretboard conditioner (oil, e.g. lemon oil). Apply the oil and buff out the excess. This should create a protective layer on the stain and at the same time it will remove the pigment that was lightly stuck on the surface that would've otherwise ended up on your hands :)
@lehrgangswerk
@lehrgangswerk 3 жыл бұрын
@@IPGuitars Thank you for your advice. I will try it.
@saakers
@saakers 2 жыл бұрын
Well, I know what I'M doing this week! The ESP LTD I just bought is about to look SO much better
@IPGuitars
@IPGuitars 2 жыл бұрын
Awesome! Let me know how it turns out!
@ikigai47
@ikigai47 6 ай бұрын
Thanks for this! I don't know why but light colored fretboards (that aren't maple) annoy me. Like Indian Laurel. When you played the guitar later, did it stain your fingers at all?
@IPGuitars
@IPGuitars 6 ай бұрын
I do get that yeah. And no, no pigment lifted off onto my fingers. This is why the prepwork and oiling is important. It will reduce any of the loose pigment on the surface.
@ikigai47
@ikigai47 6 ай бұрын
@@IPGuitars Thanks
@rons-topic1067
@rons-topic1067 3 жыл бұрын
Can you please tell me what type of colour to make it black.? Can I get it from guitar store or I can use any colour that is used in wood
@IPGuitars
@IPGuitars 3 жыл бұрын
I would recommend using either a spirit-based or water-based stain to get the desired results. Stains used for leather also work well.
@derickprawira9951
@derickprawira9951 3 жыл бұрын
hi, cool video, what kind of stain liquid are you using it to ebonize the guitar?
@IPGuitars
@IPGuitars 3 жыл бұрын
I'm Crimson Guitars Stunning Spirit Stains in the video. So a spirit-based stain.
@derickprawira9951
@derickprawira9951 3 жыл бұрын
@@IPGuitars thanks man!
@longneck4717
@longneck4717 11 ай бұрын
Looking to do this but shipping from Crimson Guitars is super pricey. Are there any alternatives on Amazon you’d recommend?
@IPGuitars
@IPGuitars 11 ай бұрын
Great question! One quick follow-up: are located around where in the world? (Depends on what I'll recommend)
@longneck4717
@longneck4717 11 ай бұрын
@@IPGuitars I’m located in the US! Ended up ordering a water based black stain from Saman. We’ll see how it turns out
@IPGuitars
@IPGuitars 11 ай бұрын
Ah cool, lemme know how it turns out :) for other luthiery supply stuff in the US, check out StewMac. They've got pretty much everything. Had a quick look, they even specifically have a "Black fretboard stain"
@emompong05
@emompong05 Жыл бұрын
Hey man! Great Vid! I came across in my search to staining my Pau Ferro Fretboard. Have you had personal experience on that wood? Thanks!
@IPGuitars
@IPGuitars Жыл бұрын
Thanks, glad you liked the video! I actually am just about to work on my first Pau Ferro fretboard, but it shares a lot of qualities with rosewood. It's also a fairly oily wood, so isopropyl alcohol would come in handy for cleaning it before any stain would be added.
@emompong05
@emompong05 Жыл бұрын
@@IPGuitars that's exciting! When do you plan to do it? PF appears to be more denser than RW tho, I hope it absorbs the stain with minimal residue on fingers when playing.
@ejmusicofficial
@ejmusicofficial 3 жыл бұрын
What if i have clay dot inlays?would scraping it off be needed?
@IPGuitars
@IPGuitars 3 жыл бұрын
Scraping things clean is a matter of whether the stain sticks to the material and whether you want the dots cleaned up or not :) in the end it becomes a matter of personal taste
@far0n
@far0n 2 жыл бұрын
Can anyone tell me if either acetone or methanol are suitable? Could you have done a 3rd coat for an almost black look?
@IPGuitars
@IPGuitars 2 жыл бұрын
Acetone will work just fine. Yes, definitely, you can add as many coats as you want until you get the effect you're looking for :)
@Budwhy
@Budwhy Жыл бұрын
Could you please tell me the time gap between the layers.
@IPGuitars
@IPGuitars Жыл бұрын
20 minutes between coats, 3 coats per session, 24 hours between sessions
@Budwhy
@Budwhy Жыл бұрын
And how many sessions ?
@Budwhy
@Budwhy Жыл бұрын
Could you please tell me which cloth you are using
@IPGuitars
@IPGuitars Жыл бұрын
I'm so sorry, I COMPLETELY mistook which video you were commenting on🤦🏼‍♂️🤦🏼‍♂️ Stain-wise, it depends on if you're using water or spirit based, because you need to let them fully dry. This will read on the label for the stain you've chosen. Layerwise, I usually might do two for this sort of thing, but honestly it depends on how dark you want and how long until it is that level of black. As for oiling afterwards, one layer on the board, then wipe off the excess. The cloth is just paper towel here.
@IPGuitars
@IPGuitars Жыл бұрын
Sorry again for the confusion there.
@Cougar139tweak
@Cougar139tweak 2 жыл бұрын
very cool but use a burnisher for the dot inlays or 1000 grit sandpaper
@IPGuitars
@IPGuitars 2 жыл бұрын
Also a very good method for sure
@Dudfoot67
@Dudfoot67 3 жыл бұрын
Hi, would isopropyl alcohol be ok for cleaning and preparing the fretboard ? Thanks
@IPGuitars
@IPGuitars 3 жыл бұрын
Oh most definitely. I just didn't have any at hand when filming :) of course, everything in moderation
@CattleRustlerOCN
@CattleRustlerOCN 4 жыл бұрын
Great video. Im blacking out my Ibanez bass tomr
@IPGuitars
@IPGuitars 4 жыл бұрын
Awesome! Lemme know how it goes :)
@אריק-צ5ר
@אריק-צ5ר 3 жыл бұрын
Ibanez was mistaken with Jatoba. I bet enonizing fretboard get real popular.
@IPGuitars
@IPGuitars 3 жыл бұрын
Ebonizing fretboards is making a larger comeback for sure as there are easier ways of achieving such nowadays by any diy player/hobbyist out there. I had an experience with an old Yamaha neck from the 90s that was marketed as an ebony fretboard, but it was painted rosewood.
@javiermeliendres2688
@javiermeliendres2688 3 жыл бұрын
The ebonize chance the sound or it s a only a cuestión of look?
@IPGuitars
@IPGuitars 3 жыл бұрын
It is only an aesthetic change, for those who just want a little darker of a fretboard color :)
@frankmadorefm
@frankmadorefm 4 жыл бұрын
Don't any stain stains your fingers when you play?
@IPGuitars
@IPGuitars 4 жыл бұрын
It shouldn't that much. Once you oil the fretboard after the stain has cured, it sort of "protects" it. When you rub off the excess oil, you're also removing all the loose pigment on the surface, which would have come off otherwise. Other than that it should be pretty fine. I have an acoustic I did this with last year and I'm yet to get any pigment on my hands :) But just like with any oil+stain finish, over the years you will see wear as you play, but it shouldn't really come off onto your hands as such.
@darkflash32
@darkflash32 2 жыл бұрын
would these stains fade as you play the guitar? or no?
@IPGuitars
@IPGuitars 2 жыл бұрын
If done properly it won't. Of course over age it will wear, just the same as any finish really, but with proper prep to get the stain to penetrate a little, and oil on top, it'll be good for a while. Wearing also will depend on the stain that was used as well.
@nyungsepart1215
@nyungsepart1215 3 жыл бұрын
What do you think about using teak oil on a rosewood fretboard?
@IPGuitars
@IPGuitars 3 жыл бұрын
It works and there's no real reason you couldn't use it :)
@oliviamarie1548
@oliviamarie1548 3 жыл бұрын
Hi, Did you sand the fretboard beforehand? In the beginning it looks like it had been sanded a little but I just want to make sure before I do this on mine.
@IPGuitars
@IPGuitars 3 жыл бұрын
I only cleaned it. To sand the fretboard properly, you'd have to remove the frets. You could potentially scrape it clean as well, but honestly, just using something like isopropyl alcohol to clean the fretboard is far easier :)
@Nate-gh1hy
@Nate-gh1hy 2 жыл бұрын
Where do you buy that black stain?
@IPGuitars
@IPGuitars 2 жыл бұрын
This was the Crimson Guitars stain, so it is available through their store and you can get either the spirit-based or the water-based version.
@AdamCantalupo
@AdamCantalupo 3 жыл бұрын
Been looking online for a while now for the best/practical method for doing this on my jackson king v. I really dig how this doesn’t require sanding! But I do want my board pretty much as black as I can get it. Would using this stain get it really dark with multiple coats? Or would you recommend a different product or method?
@IPGuitars
@IPGuitars 3 жыл бұрын
Oh you definitely don't need sanding for this to be convincing enough :) and yes, essentially as long as you have done your prepwork well enough (fretboard is clean and dry), the more layers you add the darker you can get it. Just let layers cure in between new layers and you should be just fine👌
@AdamCantalupo
@AdamCantalupo 3 жыл бұрын
@@IPGuitars sweet! Thank you for the reply
@jmCodinach
@jmCodinach 3 жыл бұрын
@@IPGuitars thanks for the vídeo. How long It takes to cure between layers?
@IPGuitars
@IPGuitars 3 жыл бұрын
It depends on what kind of stain you use. Always good to check the instructions on the label :) but for example spirit based stain will off-gas fairly quickly, so adding layers doesn't take long, so I'd usually give it a fair 20 minutes to be on the safer side. Water based will take a little longer, as you wait for the water to dry, depending on how much stain you use (how wet you use it) this can be from an hour to several.
@jmCodinach
@jmCodinach 3 жыл бұрын
@@IPGuitars i just bougth the Crimson's stain like the one you use. I hope to receice it soon.
@Cestariarts
@Cestariarts 3 жыл бұрын
Hey mate, I've done the process on my guitar but even using lemon oil after the staining process I get my fingertips dyed black after playing for awhile :( any recommendations?
@IPGuitars
@IPGuitars 3 жыл бұрын
Make sure that when you apply the lemon oil, you rub off all of the excess oil. You can really buff up the fretboard to make sure that any excess oil (or pigment) won't continue to lift off. Now with some oil on already, you've kind of helped seal in the pigment a little more, so best thing to do is apply a very thin coat of oil again and make sure to buff up and remove all of the excess. If your pigment (stain) is clearly lifting off, then there might be an issue where the fretboard wasn't clean and dry enough before staining and some oil residue (for example) isn't allowing the stain to fully sink in.
@sayyidinaazzahra5603
@sayyidinaazzahra5603 3 жыл бұрын
can u use acetone to clean it?
@IPGuitars
@IPGuitars 3 жыл бұрын
Oh definitely, cleans up the residue/oil and doesn't damage the wood as it evaporates quick.
@sayyidinaazzahra5603
@sayyidinaazzahra5603 3 жыл бұрын
@@IPGuitars and can i use lemon oil for the last step?
@IPGuitars
@IPGuitars 3 жыл бұрын
Yes, it's meant for fretboard conditioning the same way as the oil I used :)
@harshitpawar7617
@harshitpawar7617 2 жыл бұрын
What kinda wood stains can i use when i dont have a specific Guitar stain ? l
@IPGuitars
@IPGuitars 2 жыл бұрын
You can use any kind of water or solvent based stain for this. Another very good product is leather stain. I strongly recommend also testing the stain before application to your actual work :)
@MATCHLESS789
@MATCHLESS789 3 жыл бұрын
Informative video! What would you do differently if you wanted to hide the inlays? Take them out, fill in the blanks, then stain?
@IPGuitars
@IPGuitars 3 жыл бұрын
Thank you :) And pretty much yeah. If at all possible, I would try to match the color of the original fretboard before stain to make the look more uniform after staining. But only if using wood as the filler. If you're filling the removed inlays with something else, best to try and match the look you'll get after stain, as some materials will not take to the stain as the wood does.
@Sharpened_Spoon
@Sharpened_Spoon 3 жыл бұрын
Nice video, Straight into it, no fluff. One suggestion, if you want to round the edge after staining I'm sure you can roll/compress it with something like the shaft of a large screwdriver, while not affecting the stain.
@IPGuitars
@IPGuitars 3 жыл бұрын
Thank you for digging the video. And that is a great shout! Totally slipped my mind, but an extremely nifty trick to use. Next time then ;)
@jetteastwood2714
@jetteastwood2714 3 жыл бұрын
Does the stain wear as you play the guitar?
@IPGuitars
@IPGuitars 3 жыл бұрын
Over the years, yes. But it won't be as obvious as paint wearing off as the stain penetrates the wood more. If you're staining a darker wood already, the wearing will show even less :)
@GRUNGELEOPARD
@GRUNGELEOPARD Жыл бұрын
What was the stain called please..?
@IPGuitars
@IPGuitars Жыл бұрын
In the video I used Crimson Guitars Stunning Stains
@bagenklopedia9156
@bagenklopedia9156 3 жыл бұрын
What fluids do you use..sorry i m from indonesia
@IPGuitars
@IPGuitars 3 жыл бұрын
No problem :) I used D'Addario Deep Cleaner to clean the fretboard Crimson Guitars Stunning Stains to stain it And Crimson Guitars Fretboard Restorative to oil it
@Johnmannish
@Johnmannish 3 жыл бұрын
Great! can i use leather paint?
@IPGuitars
@IPGuitars 3 жыл бұрын
Technically yes. But any sort of paint will wear down faster and look more obvious. A stain or even leather dye will seep into the grain of the wood and will therefore wear down at a much slower and less obvious way :)
@Bullet44
@Bullet44 3 жыл бұрын
Do you think 4 coats would be too much?
@IPGuitars
@IPGuitars 3 жыл бұрын
If it feels like you'll need it sure. But usually you should see a good result in just two. BUT very much depends on the stain you use, some take more to the surface than others
@toneseeker4968
@toneseeker4968 4 жыл бұрын
Great job...excellent video!
@IPGuitars
@IPGuitars 4 жыл бұрын
Thank you! :) I'm glad you liked it.
@ramadanzain2041
@ramadanzain2041 3 жыл бұрын
Sir, I want to try this on my classic Yamaha guitar, but I'm worried that the stain I use will wear off. can i use water based stain?
@IPGuitars
@IPGuitars 3 жыл бұрын
You can definitely use water-based stain for this. Just make sure to thoroughly clean the fretboard beforehand and add a few layers. Let it cure and dry off properly before adding any oil on the board :)
@Cestariarts
@Cestariarts 3 жыл бұрын
Did you mod this body as well? Looks matte and super cool
@IPGuitars
@IPGuitars 3 жыл бұрын
Actually yes I did :) full refinish to matte black
@sarcasmsociety9517
@sarcasmsociety9517 3 жыл бұрын
Can I use tongue oil to finish it ?
@IPGuitars
@IPGuitars 3 жыл бұрын
Actually yes you can :)
@sonysoni5079
@sonysoni5079 3 жыл бұрын
That guitar now looks phenomenal. What do you think, will this method work on jatoba freatboards? Sory on my bad English.
@IPGuitars
@IPGuitars 3 жыл бұрын
Thank you :) and as someone mentioned in the comments: the fretboard in the video is a Jatoba fretboard and not rosewood. So, yes it will work :D
@HectorBadillaOfficial
@HectorBadillaOfficial 2 жыл бұрын
How is the guitar looking today?
@IPGuitars
@IPGuitars 2 жыл бұрын
Still looking great👌🏻
@HectorBadillaOfficial
@HectorBadillaOfficial 2 жыл бұрын
@@IPGuitars cool!!! Thanks man! I’m gonna do this 🔥
@gavinrussell2755
@gavinrussell2755 3 жыл бұрын
How long did it take for the fretboard to dry after the stain?
@IPGuitars
@IPGuitars 3 жыл бұрын
I used the spirit stains, which dried up pretty quick. I'd say that give it a good 10-15 minutes at the very least for best results before oil :) with water-based I would rather go hours. You can tell when the stain has dried by how it looks. Any splotching and wait a little longer :)
@gavinrussell2755
@gavinrussell2755 3 жыл бұрын
@@IPGuitars Thanks. I tried to darken the fretboard on my LP to make it look more vintage accurate. I think where I messed up was not cleaning and drying out the fretboard well enough for the stain to absorb properly. The stain has rubbed off from playing. So I am going to make another attempt to darken it.
@IPGuitars
@IPGuitars 3 жыл бұрын
Ah yeah, good to make sure you get the wood as close to "untreated" as possible with cleaning it. Essentially giving the best odds for the stain to absorb into the wood grain and stick. Any residue, oils, or build-up will inhibit the results. Hopefully your next try will go off without a hitch though! :)
@hate8224
@hate8224 3 жыл бұрын
Would it dye plastic inlays?
@IPGuitars
@IPGuitars 3 жыл бұрын
Not really. I mean, yes it will stick to it, but it will not look clean by any means. And it will come off if you scratch it with even a fingernail.
@dougheperi5801
@dougheperi5801 2 жыл бұрын
After a cup of coffee, I just want people to talk faster, apart from that, a good video, cheers mate, hi fom Doug the Kiwi.
@IPGuitars
@IPGuitars 2 жыл бұрын
Cheers Doug! If I tend to meander through my words, there's always the option (after a cup of coffee) of 1.5x video speed in the settings haha
@dougheperi5801
@dougheperi5801 2 жыл бұрын
@@IPGuitars Funny you should say that, I actually was going to do that, then it made me feel like I should learn to be more patient.
@jameshalbert181
@jameshalbert181 2 жыл бұрын
I've noticed everyone sounds stoned when I slow down to .75 no matter how smart and articulate they are. It's good for a laugh .
@IPGuitars
@IPGuitars 2 жыл бұрын
Haha, I can imagine
@truffeltroll6668
@truffeltroll6668 3 жыл бұрын
Can you use any color ? Like red or white?
@IPGuitars
@IPGuitars 3 жыл бұрын
Yes you can :) But if you have a dark wood, then the color won't really show too well. I remember using some cherry red on a rosewood fretboard and that looked pretty sweet. But if you have a maple fretboard, the sky is the limit!
@truffeltroll6668
@truffeltroll6668 3 жыл бұрын
@@IPGuitars thanks, i just want a dark red touch, that souts the guitar
@blacksaona
@blacksaona Жыл бұрын
Dude the final product ended up so beautiful! Is the guitar finish matte or satin?
@IPGuitars
@IPGuitars Жыл бұрын
Thanks so much! The guitar was finished matte.
@conversemusic4387
@conversemusic4387 3 жыл бұрын
How is it holding up 5 months later?
@IPGuitars
@IPGuitars 3 жыл бұрын
Still holding up :)
@johnnydswing
@johnnydswing 8 ай бұрын
Big difference 👏👏👏👏
@richardreinle7322
@richardreinle7322 4 жыл бұрын
Would this stain work on a Pau Fretboard? I tried to get my fret board darker with a stain marker , after 3 days it darkened a bit but it just seems that Pau Ferro doesn't suck in stain. Great Video Thanks for Posting
@IPGuitars
@IPGuitars 4 жыл бұрын
Some exotic woods are fairly oily and take stain a little harder, however if you clean the fretboard properly and get it dry enough, spirit stain or leather stain should work pretty well to darken it.
@richardreinle7322
@richardreinle7322 4 жыл бұрын
@@IPGuitars Thank you That helps a lot. Appreciate it
@IPGuitars
@IPGuitars 4 жыл бұрын
No problem :) hopefully it works out for ya!
@andy_182
@andy_182 3 жыл бұрын
Now how does on remove these stains
@IPGuitars
@IPGuitars 3 жыл бұрын
Either by sanding, acetone/alcohol of some sort. Really depends on the type of stain and how good a job you did when you applied it. It might come off easy or it might be a pain.
@plexibreath
@plexibreath 2 жыл бұрын
Crimson's Fretboard Restorative is Nectar Of the Gods.
How To Darken Your Fretboard | Mythos Mods
14:40
Mythos Pedals
Рет қаралды 28 М.
darkening a laurel guitar fretboard on an Epiphone Les Paul
27:14
Mom Hack for Cooking Solo with a Little One! 🍳👶
00:15
5-Minute Crafts HOUSE
Рет қаралды 23 МЛН
Try this prank with your friends 😂 @karina-kola
00:18
Andrey Grechka
Рет қаралды 9 МЛН
How to stain a Fender maple fretboard
4:37
StewMac
Рет қаралды 412 М.
Don't Fret, You Can Replace Your Fretboard Dots!
16:39
Nathan Sink
Рет қаралды 10 М.
Can this Wax Darken Your Fretboard?
12:35
TheGuitarGeek
Рет қаралды 30 М.
How to make rosewood fretboard DARK [Like Brazilian]
8:20
8Bomb Custom Workshop
Рет қаралды 63 М.
ENHANCE your WOOD GRAIN! (new EASY technique!!!)
9:25
Guns and Guitars
Рет қаралды 423 М.
"Ebonize" your fretboard with black stain
19:34
Mike From Blood of the Wolf
Рет қаралды 26 М.
How to Color A Fretboard
11:54
Brad Angove
Рет қаралды 14 М.
Making It POP!!!!  Ebonizing Rosewood Fretboard Part 1
13:00
Kevin Frasard
Рет қаралды 75 М.
"Ebonize" Laurel fretboard: stain, dye or ink?
22:39
Mike From Blood of the Wolf
Рет қаралды 6 М.
My Favorite Finish For A Guitar's Fretboard
15:17
Highline Guitars
Рет қаралды 69 М.