Industrial PLC Panel Wiring, PLC in Hindi | Control Panel Working with Basic, Step By step explain

#IndustrialPLC #Panel #Wiring #PLC
Join this channel to get access to perks:
/ @electricalandautomati...
How to do Digital Output wiring in PLC/DCS
• Part - 2 | potential f...
-----------------------------.-.-.-.-.-.-.-.-.-.-.------------------------------------
how to do Digital input (DI) the wiring video in plc /dcs
• Part -1 | How to do Di...
.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.--.-.-.-.--.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.
Part - 3 | Wet Contact | How to do Digital Output wiring in PLC/DCS | wiring oF DCS/PLC
Join this channel to get access to perks: / @electricalandautomati...
Join this channel to get access to perks: / @electricalandautomati...
Calibration Procedure of Level Transmitter by using HART 475 field communicator in Hindi | URV | LRV
• Calibration Procedure ...
How Flield devices communicate with the controller, server , engineering station & Remote I/O panel
• How Flield devices com...
How to read Wiring from field to DCS/PLC | Marshaling Cabinet | Field Junction Box| Flow of signal
• How to read Wiring fro...
ON/ OFF Temperature Controller Masibus LC5296-H Configuration | controller programming | LC5296AT
• ON/ OFF Temperature Co...
How did the Control valve nameplate read? | Leakage Class, Cv, Rating ASME rating in Hindi
• How did the Control va...
Wiring of 2 Wire & 4 Wire transmitters of DCS\PLC in Analog Input! Electrical & Automation
• Wiring of 2 Wire & 4 W...
Everything discussed here, Controller (PLC), AI, AO, DI, DO cards, TB, Isolators etc
Industrial PLC Panel Wiring, PLC in Hindi | Control Panel Working with Basic, Step By step explain

[@muhammadsaeed1636]

I saw many plc video but your video is in details thank you for video

[@ElectricalAndautomation_guru]

Most welcome 😊

[@nikunjdholakiya4578]

Sir, You explain it very clearly. Thank you so much.

[@ElectricalAndautomation_guru]

You are most welcome

[@AI.AUTOMATION.7143]

sir aap ne bahut badiya samjhaya 🥰🥰🥰🥰🥰

[@modassirafzal3045]

Bahut hi achi trah aap ne bat ko samjaya hai sukriya aap ka

[@ElectricalAndautomation_guru]

Thank

[@ludo4you578]

Mai esi video ka bhot dino se wait kr rhi thi aj mila h mujhe thank you 😊

[@ElectricalAndautomation_guru]

Thanks for the appreciation!/

[@sajid_official8810]

Sir Aap Bahut Ache se Samjhaye Thanks

[@ElectricalAndautomation_guru]

Thanks, plate share with others.

[@nomanbaig100]

aap ka channel bahut zabardast hai bhai keep it up

[@ElectricalAndautomation_guru]

Thanks, please help us to grow again, share with others.

[@sharjeelnadeem4855]

Sir, Thankyou so muchh 🙌 You have really good knowledge of Instrumentation 🙌 Sir again thanks and waiting for more videos 🙌

[@ElectricalAndautomation_guru]

Welcome, there are so many videos in the playlist and videos sectuon please see and share

[@techstudy8722]

So underrated channel you deserve millions.

[@ElectricalAndautomation_guru]

Thanks

[@issamkarim7554]

Clear crystal concept ❤️

[@ElectricalAndautomation_guru]

Thanks

[@SR.traveling]

Bahut acche se samjhaya bhai ne aise hi clearly samjhaya karo aur har ek equipment ka full work and full form bhi bataya karo. Thank you😊

[@ElectricalAndautomation_guru]

sure and thanks

[@anjanagupta3854]

Thanks a lot it's really very good video.. appreciating ur way teaching..pl keep putting the videos like this ...so that we could learn

[@ElectricalAndautomation_guru]

Thanks

[@alwaysmotivation3532]

Thank you so much sir this video very helpful for improvement in PLC knowledge and keep bringing more videos like this 👍

[@ElectricalAndautomation_guru]

Sure, Nd thanks

[@amitabhakdh]

Thank you Bohot acha video 👍 ek baat analog input and output card voltage sence bhi hoti hai hum ne Siemens ki +/- 10 volt use kiye hai bohut sare project me.

[@ElectricalAndautomation_guru]

Thank you, please subscribe to our channel and do not forget to share with others. If you already subscribe to our channel then thank you for doing so.

[@amitpagare5946]

🙏🙏🙏 naman hai aapko aapke karya ko 🙏🙏🙏

[@ElectricalAndautomation_guru]

Thank you for the so much appreciation and love if you really like this video but do not forget to share with others social media groups and your friends with technical group so that we can expect our ideas to reach more people so that they can also take the benefit of videos like this

[@jitendrakurle3379]

सर आपने बहुत अच्छी तरह से एक्सप्लेन की या है

[@ElectricalAndautomation_guru]

Thanks, please share with others!

[@radheradhe11193]

Nice.... Bauth achhi bat btae

[@ElectricalAndautomation_guru]

Thanks, if you like the video the video , do not forget to like the video and subcribe channel. if you ahave alredy done, please ignore this!

[@pankajsharma-du2dl]

Very good example Diya hai aapane

[@user-bn3oy1jy6g]

Sir ap bohat acha samjhaty ho Sir one video hvac pacu unit k ddc panel py complet video bana do

[@ishtiaqalishah9544]

Shukar Hai k ka ap dobara s agye hain umeed hain phly s zyada achi video honge ap ki Well come back sir

[@ElectricalAndautomation_guru]

Thank you bro

[@ajabgajab4445]

Very helpful video sir

[@ElectricalAndautomation_guru]

Welcome, please share with others, and do not forget to subscribe to the channel

[@arunkumarswain7162]

Very nice explain sir

[@ElectricalAndautomation_guru]

ok, thanks, please don not forget to subscribe our channel and don to forget to share with your friends in social media platforms.

[@abhaygm]

Super se bhi upar

[@ElectricalAndautomation_guru]

Ok

[@sajid_official8810]

SIR AAPKA BAHUT BAHUT SUKRIYA...

[@ElectricalAndautomation_guru]

Thanks , please share with others.

[@sajid_official8810]

@@ElectricalAndautomation_guru Okay Sir...

[@just_travelling]

Sir phone ko km hilao chakkar aare but video achi hai

[@signatureyt]

😂😂😂

[@gairolakamal]

That's really amazing Amar..!! I really appreciate your hard work to get the real industrial technical stuffs for the aspiring people.. Keep up the good work and All the best.

[@ElectricalAndautomation_guru]

Thanks brother!

[@PancaSintesa]

Ro plant...nice sharing...

[@ElectricalAndautomation_guru]

Thanks for visiting

[@mixedfeelings9782]

Nice video sir

[@ElectricalAndautomation_guru]

Thanks

[@gajendrachauhan7579]

I like your video. and I really missed you Sir.

[@ElectricalAndautomation_guru]

Thank you brother, for your kind words, no worries, I am back strongly, you will get regular video. Please help us, I request you, please share our all video share with your social-technical groups like Watsup, Facebook etc.pplease helps us to grow again.

[@gajendrachauhan7579]

@@ElectricalAndautomation_guruThank you sir

[@Gaurav-121]

thank you sir you are doing great job .

[@ElectricalAndautomation_guru]

Thanks and welcome

[@shravanyadav395]

Thanks so much sir very helpful video sir 🙏

[@ElectricalAndautomation_guru]

Welcome brother

[@7845802307]

You are doing great work sir

[@ElectricalAndautomation_guru]

Thanks, please share with others.

[@shailendrachauhan6171]

Good knowledge and helping video sir

[@ElectricalAndautomation_guru]

Thank you

[@premoli8953]

bahut achha se bata aapne Sir mijhe yek chij ka confrom karna tha(Ai) or AO ka wairing or funtion 2 wire ka thermocouple ka or TT ka vi achha se cliar nahi hai plz thoda bata dijiye na sir❤️🙏❤️❤️❤️

[@ElectricalAndautomation_guru]

Already made a video on that please see. Thank you, please subscribe to our channel and do not forget to share with others. If you already subscribe to our channel then thank you for doing so.

[@mohammedmoinuddin4247]

Thank you sir Very informative vedio

[@ElectricalAndautomation_guru]

ok, thanks, please don not forget to subscribe our channel and don to forget to share with your friends in social media platforms.

[@sargam8853]

Super understanding video sir I like it

[@ElectricalAndautomation_guru]

Thanks, please share with others.

[@nileshdabhi409]

Wonderful video Please sir Make video on Yokogawa DCS system videos

[@ElectricalAndautomation_guru]

Sure, brother, very soon, I will provide video on Yokogawa centum vp and cs 3000. Just stay with us. Help us to grow. And share our video to your Facebook and Watsup technical group please.

[@md.arifuzzaman648]

this is the video i have been searching for last 7 days. thank you so much ❤️

[@ElectricalAndautomation_guru]

Glad I could help!

[@masibhai339]

supperb bro nice explaination waiting for other videos thanks

[@ElectricalAndautomation_guru]

Thanks and sure. Please share with others.

[@syedhassanali9330]

Sir, absolutely I am waiting your informative videos

[@ElectricalAndautomation_guru]

I have already uploaded so many videos in my channel video live please go to our channel video list or you can also go to our playlist also you can find the so many videos bat they can help you I hope

[@sibinmarsal6027]

Great explanation

[@ElectricalAndautomation_guru]

Thanks, please share with others.

[@crazysquad3809]

Very nice video much much appreciated ❤❤

[@ElectricalAndautomation_guru]

You are very welcome

[@AyanVadodariya-qi5sm]

just amazing... man...

[@ramanisudhakar3660]

Thank for video

[@ElectricalAndautomation_guru]

Thanks for the appreciation and do not forget to check out the more videos are present in the video list and if you like this video that do not forget to share every video which you like it thank you for your appreciation and kind Association with us

[@Invisible_Tri]

Super explanation sir...keep going

[@ElectricalAndautomation_guru]

Thanks and welcome

[@jyotimore4745]

@@ElectricalAndautomation_guru of DX s. Soham the the er

[@technicianks1932]

Very useful video sir please make instrument technician more videos

[@ElectricalAndautomation_guru]

Ok sure

[@VijayKumar-ej6of]

Very very clear

[@ElectricalAndautomation_guru]

Thanks, please share with others.

[@azmuddinsheikh1462]

You're genius sir, ❤🤝✌

[@ElectricalAndautomation_guru]

No, but thanks for the appreciation, do not forget to share with others

[@umargul5644]

Well done sir thanks

[@ElectricalAndautomation_guru]

Thanks

[@gangadhardas3318]

Super separate one video Banao sir 💥💜💕♨️👍

[@ElectricalAndautomation_guru]

Ok sure.

[@smitpatel1851]

Very nice informative video sir...

[@ElectricalAndautomation_guru]

Thank you, please share with others.

[@hvac877]

Very good explanation

[@ElectricalAndautomation_guru]

Thanks, please share with others

[@d.anandkumar4856]

Thank you sir..I learnt a lot.. please upload a video regarding relay connection

[@ElectricalAndautomation_guru]

Ok.sure

[@durgeshgaur9366]

Really u r great teacher sir

[@durgeshgaur9366]

Sir i also request you please make a video on Relay Connection.

[@patelrushikesh5698]

we are with you sir please upload more videos on PLC and DCS

[@ElectricalAndautomation_guru]

Thanks and sure. Please share with others.

[@mohammdmubbasir2021]

Very easily explained

[@ElectricalAndautomation_guru]

Thanks, please share with others.

[@sudhakaryadav4395]

It's really amazing video sir Thank you very much 👏

[@ElectricalAndautomation_guru]

Please do share with others

[@vishalmundye8787]

👌👌nice information in instrumentation

[@ElectricalAndautomation_guru]

Thanks, please share with others

[@sabahathussain1320]

Very good explain sir Also explain with plc diagram Sir

[@ElectricalAndautomation_guru]

Ok, sure.

[@ImranShaikh-qh2rv]

Nice video good explan👍

[@ElectricalAndautomation_guru]

Thanks for the appreciation, please share with others so, that others can take benefit of it.

[@raebareliliveamardigitaltv5312]

Nice channel sir

[@ElectricalAndautomation_guru]

Thanks

[@subhamsardei9500]

Superb information sir jii I want a new video like dilated videos Please sir

[@ElectricalAndautomation_guru]

Ok. Thanks

[@ayushtripathi266]

Have a great journey ahead.✌️

[@ElectricalAndautomation_guru]

sure brother, thanks for support!

[@gautamcreations235]

Very useful and compact information

[@ElectricalAndautomation_guru]

Thanks, please share with others.

[@riz9825]

Its great basic information i m confused about analog inputs ll be given to plc through isolators where as digital outputs ll be given to field devices through relays and contactors,how we connect digital out put devices to plc ,is it like through relays and then to out card of plc,similarly analog out of plc through analog card and then isolator and then to the field device,plz correct me if i am wrong.

[@ElectricalAndautomation_guru]

The 4 - 20 mA is coming from the field is taken into the isolator to take two outputs, one for plc and one for displaying the local display. DO are given through relays, the card given do as 24V and it is going to relay to energize it then that relay will give output in the form of NC and NO. I hope it will clear if any doubt. Please, welcome your questions!

[@abhaygm]

Sir programming ke sath bhi video bana dijiye ,kaunse rungs pe,kaunse module ka ,kaun TB pe kaun load laga hai. Kyu ki isme bahut di dikkat hoti hai pata lagana

[@ElectricalAndautomation_guru]

Ok, sure

[@sabahathussain1320]

Good explain

[@ElectricalAndautomation_guru]

Thanks,

[@Mithilesh658]

Very nice video sir👌👌 Sir 12V & 24V DC current ka jhatka lg skta h ? Sir please bataye 🙏🙏

[@ElectricalAndautomation_guru]

Thankyou. Yes definitely. But value of current is high then, it will effect.

[@darogaji3454]

Very good

[@ElectricalAndautomation_guru]

Thanks, please share with others, and see others video please

[@vinodbankar8942]

Control wire pr ferrule rahta hai use kaise read kre...?? Woh wala wire kaha se aaya hai aur kaha jara?? Is pr video banao sir

[@ElectricalAndautomation_guru]

Ok.

[@gangadhardas5622]

Super fainstatic Sir👍👍👍👍👍

[@ElectricalAndautomation_guru]

Many many thanks

[@adnanfaisal85]

Excellent work, thanks

[@ElectricalAndautomation_guru]

Welcome please see our others video please and share your feedback

[@koshalsambalpurikabita7350]

Thanks sir good information

[@ElectricalAndautomation_guru]

So nice of you

[@avinashlokanathnaiknaik7242]

Sir u r vedios awesome, please do vedios about ABB drives programming and pareter setting .

[@ElectricalAndautomation_guru]

Ok, I will try.

[@singhrohit6228]

Thank you sir

[@ElectricalAndautomation_guru]

yeah, sure. do not forget to subscribe our channel for upcoming videos.

[@shailendrajadon3599]

Nice information sir.....

[@ElectricalAndautomation_guru]

Thanks, please share with your technical social media groups.

[@shailendrajadon3599]

Sure sir.....

[@ajaybagul]

Excellent sir..

[@ElectricalAndautomation_guru]

Thanks.

[@aashifsiddiqui6716]

Sir app ek baar control wiring ko detail me bata dijiye and troubleshoot kese kre

[@mohdfaiyaz1730]

Aur f&g system ka bhi gas detection and alarm detection dono explain kariye pls

[@mohdfaiyaz1730]

Waiting for ur feedback sir

[@ElectricalAndautomation_guru]

Ok sure

[@himanshupatel8434]

Amazing information...great work

[@ElectricalAndautomation_guru]

Glad you liked it

[@airtel1730]

Mechanical engineer bhi seekh skhe esse videos banao sir ji

[@SandeepYadav-ly7rj]

Good video

[@ElectricalAndautomation_guru]

Thanks, please share with others.

[@techsolver9347]

Very nice video 👍🏻

[@ElectricalAndautomation_guru]

Thanks, please share with others.

[@ravidwivedi2169]

Good explain 👍

[@ElectricalAndautomation_guru]

Thanks, please share with others.

[@bhagwansinghlodha939]

Good sir Sir close loop k baare m video banaiye.

[@ElectricalAndautomation_guru]

Ok sure

[@kumarsp8109]

Vvv nice super

[@ElectricalAndautomation_guru]

Thanks, please share with others.

[@AbhishekKumar-ud4wt]

भाई जी आपने इस वीडियो में जो nc और no बताया उसके बारे में विस्तृत से बताए

[@sanjayverma5215]

Sir ji ek video d. C motor name plate and check kaise karte h us par banaye please🙏

[@ElectricalAndautomation_guru]

Ok sure.

[@abdulwajid3584]

Sir.... very good info.... but in plc panels if we give the output command to relay as latching then how it will switch off the relay after 5 sec and motor keeps running ? And if we possibly switch off after 5 sec and motor latch through contractor then how it's possible to switch off the motor if the output command in controller is already off.... I got confusion in this logic...

[@yogeshwaran9765]

Sir please added English subtitle because usefull for all

[@ElectricalAndautomation_guru]

ok.

[@ishtiaqalishah9544]

Hello bhai ap ka bhot intezar Karty rahy afsos howa k kisi n ap ka Channel hack Mery pas ap ki kafi video offline save the wo b chali geye the

[@ElectricalAndautomation_guru]

Yes, I know.

[@ElectricalAndautomation_guru]

Please share with others so that we can grow much faster again.

[@srpbjnr]

I want to upgrade my industry and switch to automation. This video helps to understand how automation help full. But I want automation expert to install this type of panel and control over Computer. Please help to find out expert I from Ajmer Rajasthan

[@ElectricalAndautomation_guru]

You can search on the internet

[@sarvarhusainhusain4156]

Sir packing machine ki plc wiring kaise hoti h ek vidio banaiye n

[@ElectricalAndautomation_guru]

Ok

[@hitechjcbexperiment3548]

Si ji hmi me pressure seting and auto off and auto start and dis High medium bank setting karke explain karne ki video banaye

[@ElectricalAndautomation_guru]

ok

[@simongumes1896]

Super

[@ElectricalAndautomation_guru]

Thanks, please share with others!

[@thorfin487]

Amazing 👍

[@ElectricalAndautomation_guru]

Thanks, please share with others.

[@thorfin487]

@@ElectricalAndautomation_guru yes

[@ElectricalAndautomation_guru]

Ok

[@sagarghadge3765]

Sir job ke liye bhi video banao na vacancy rahegi to sub students Ko help milegi...

[@ElectricalAndautomation_guru]

Ok, will try.

[@jaswinderkumar1533]

Good

[@ElectricalAndautomation_guru]

Thanks

[@AvikaBhajan]

Digital input ke wet contect wairing daigram video banaiye

[@ElectricalAndautomation_guru]

Ok

[@ravindaranu]

Good information sir

[@ElectricalAndautomation_guru]

Thank you for the appreciation do not forget to share with others with the other technical groups of Facebook LinkedIn WhatsApp at 17 please help us to grow

[@amitvasani1635]

Nice

[@ElectricalAndautomation_guru]

Very nice