Making bedside tables // Nightstand // Woodworking // In feel // Furniture making

[@xdacunha]

Man's out here making poetry with woodworking videos

[@infeelfurniture]

Thanks 😊

[@dryerthackston7088]

I am impressed by how easy you make it look to make these amazing tables. I know it is not as easy as you make it look.

[@nothereatall7544]

One, these look AMAZING Two, GOD I F***ING LOVE ASH

[@infeelfurniture]

Thanks;)

[@Andy-xs3ld]

Inspiring, if only I could find wood of this quality without spending more than the price of buying something ready made..... 🤔

[@aiva8001]

Very nice design and neat work, thanks for sharing

[@infeelfurniture]

Thanks for watching!

[@mobareini4572]

A wonderful Video, nice Work. Greetings from Vienna, Reini.

[@Brownshirt]

Using the jointer to blunt the corners for the lathe tool is so clever !

[@RuyiChang]

Nice tools nice work

[@benjaminjacob6716]

great work! I'd definitely avoid long sleeves around a lathe though.

[@mohitBK11]

Very beautiful

[@orangeduc3129]

Good job everything is on point

[@alessandrosuppini943]

I like the modern look simple and elegant. Also great to watch a build video with nice background music 😉

[@funkypunkypine]

Seriously! I'm so sick of woodworking videos with obnoxious rock music playing.

[@JeanetteHegmann]

This is sensational!

[@L77yma]

I want to do this! It won’t be craftsmanship level but it will be close with a few changes. Might film it. Thank you

[@АлексейВерещак-ъ2э]

гарна робота, дарма нею незадоволений)

[@RomanceInFlowers]

Good Design

[@raymondcape]

Prestisyuso ang iyong pag kabuo at pag lagay ng stain .Mahusay na desensyo at ideya .Sana marami pa ganito klase ng turo galing sa iyo.Nanuod ako dito sa Philippines

[@valmir144]

so young and so talented!

[@infeelfurniture]

Thanks for kind words 🙏

[@constructionplans4272]

Great

[@tepuntopunto]

A joy to watch.

[@matematica1.061]

Congratulations on your excellent work. It was really incredible! God bless your life.

[@kubilayylmaz1716]

Well done mate!🙏🙏🙏🙏

[@infeelfurniture]

Thanks!

[@wolfwood1669]

Verry nice, perfekt work!

[@stephan1906]

Beautiful!

[@longlehoang]

Beautiful ❤

[@ТоляСеменов-м7и]

Супер, молодець.

[@MattBodman]

Really nice!

[@有趣的灵魂-s7n]

非常好的视频，感谢分享！👍👍👍

[@jeromestsauver]

Inspired!

[@metronyc2855]

Beutiful tables! Excellent video!

[@สวัสดีพวกโง่-ฃ4อ]

amazing

[@jengineer9405]

Very nice and clean pieces.

[@infeelfurniture]

Thank you 😊

[@pierro2406]

Great work very nice but what about deformation of wood over time. ?

[@jasonhayes2606]

Absolutely beautiful work 👍

[@igornarodny.furniture1665]

Просто и изящно! Ручки топ🔥

[@alexanderknyschstudio]

Beautiful work...like always!

[@gr_woodworking]

Glad you're back! great work as always :)

[@infeelfurniture]

Thank you 😊

[@klm31-z9v]

Отличная работа!!

[@СергейКиселёв-э5б]

Ты молодец

[@mauriciojerez2459]

ELEGANTE, GENIAL

[@ДенисБалахничев]

Классная работа.

[@Rtlechinedelarbre]

Bonjour J’ai adoré cette vidéo et le résultat obtenu est magnifique bravo, c’est la première que je commente mais je te regarde depuis un petit moment maintenant! Félicitations

[@MrGriffiny]

До речі, саме твої відео були, так би мовити, останнім поштовхом до того, що я почав організувати свою майстерню, трохи більше року тому.))) Найбільша проблема, яка мене стримувала, це приміщення. З початком війни було вкрай ризикованим винаймати окреме приміщення, тому міг розраховувати лише на власний гараж і прилеглу кімнату. Але потім побачив, на якому клаптику ти чудово справляєшся і робиш чудові речі!!! Тож всі сумніви тоді відпали, про що ні разу не шкодую. Тому моя повага за твої відео!!!! Так тримати!!!

[@infeelfurniture]

Дуже приємно це читати!!! Дякую 🤗

[@UraKrugliu]

Гарно!...Стильно...

[@infeelfurniture]

А головне кругло! Дякую 🤗

[@marwo28]

I'm new to woodworking. What kind of wood did you use? Thank you for sharing such great contents!

[@kevinb6102]

Wow

[@colinyaum]

I subscribe because of video graphics and background music

[@harveytherobot]

These are just beautiful! I'm also intrigued by your homemade router table. Any chance you'll post a video on how you made it or sell plans?

[@infeelfurniture]

kzbin.info/www/bejne/qoTCmK2EeLSNqck this video is on my channel, but unfortunately there is no detailed plan:)

[@AJonahU]

What drawer pull handle bit do you use? Beautiful!

[@pgtips4240]

Great video. I had to watch it on silent cos the music was spoiling it for me.

[@topcheese2889]

Did you have a growth spurt after making your workbench and router table?

[@joseesteban75]

👌👌

[@olegromanyk2315]

What kind of finish did you use, BTW looks incredible P.S. jig for the legs something what I never seen before, genies work

[@infeelfurniture]

I use American wood oil, sorry for late reply 😅

[@jumbojaz]

Love the work! so quick question, do you design the whole thing and make a blueprint?

[@infeelfurniture]

Sometimes by myself, sometimes duplicate, most is my own design, but this nightstand - duplicate:)

[@bigsityforever5264]

Какое масло для покрытия ты используешь?

[@captainwoodworking1273]

I love your side tables. May I ask you what kind of finishing you use? By the way your router table fence micro adjustment is amazing.

[@infeelfurniture]

Hi, in this case i used a product from American wood oil stain and Clear seal finish Thanks for watching!

[@MrSnailwood]

I'm just starting to get into the hobby, but one of the first things I learned was never to wear long sleeves by the lathe--are those concerns overblown?

[@tommiekebab1929]

Nice job, you do this out of your head or do you have plans for the night stands? I would like to make them myself.

[@infeelfurniture]

Thanks 😊 but unfortunately, I have no plans for this bedside😕

[@Stripemedia]

Great work! What was the glue you used to fix the front of the drawers with? I didnt see clamping - just a quick squeeze of the hand and they were set in place. Did you add superglue?

[@sandro6306]

Que le pusiste como protector ala madera?

[@СергейКарчин-я1г]

👌

[@TheRickymak]

where did you get the ideas for this nightstand? What's the best way for me to get the dimensions/plans to build it? Thanks

[@zpalladino]

How much does a biscuit maker tool run ya and how often would you say you use it? It seems to pop up in every woodworking video I watch and it’s time to invest in one

[@infeelfurniture]

this is a very useful tool, when I have it, I can find a use for it in almost every project! So yes, I recommend it!

[@zpalladino]

@@infeelfurniture cost?

[@infeelfurniture]

@@zpalladino I have a used one from Lamelo, from the 80s, it costs about $200-250

[@zpalladino]

@@infeelfurniture thanks!

[@bumpnuglies]

What size router bit for the drawer pulls is this??

[@nytroxyco]

What product to apply at the end for the finish??

[@ХамзатМагомадов-э3с]

В конце с креплениями ножек к ящику-НАКОЛХОЗИИИЛ!! ВСЁ ИСПОРТИЛ С ЭТИМИ ВИНТАМИ.

[@cosmodelia]

❤

[@AlvaroVeraT]

Beautiful, What kind of varnish do you use?

[@infeelfurniture]

American wood oil, sorry for late reply 😅

[@AlvaroVeraT]

thanks!@@infeelfurniture

[@кинстинтин75]

Пожалуйста подскажи какую фрезу использовал для закругления наружных углов самого корпуса. Спасибо!

[@raymondcape]

Ito po ay ang Router table bits

[@кинстинтин75]

@@raymondcape размеры фрезы,радиус и так далее

[@infeelfurniture]

Dimar r=16mm made in Israel

[@кинстинтин75]

@@infeelfurniture благодарю от души! Желаю успехов в любимом деле!

[@УралАхмадыкин]

Ширина ламели не должна быть больше ее высоты более чем в 3 раза. В остальном респект!

[@infeelfurniture]

😁😁😁😃

[@МаксимС-т7д]

То же попадалось такое правило, но это если ты работаешь с дровами вроде соосны и ели, если с плотными породами то как бы ты в домике. Я разделочную доску сделал из куска дубовой доски, размер примерно 25х18, в дело не пошла из-за трещины, я думал она в трубочку свернется, а она как после фуганка, несмотря на трещину с треть доски и то что иногда по несколько дней в раковине лежит в воде

[@УралАхмадыкин]

Вот и ответ вам, и к тому кто смеется надо мной. У дерева есть внутренние напряжения, и они никуда не денутся (неважно аакой породы, метода сушки), если ты их не разрежишь на ламели, отфугуешь и склеишь. А ответ прост. Доска то твоя не в деле, а с трещиной)), может и не выгнуло , но треснула. Также смотри на сечение годовалых колец в дереве. Но если ты мне не веришь, возьми литературу, посмотри действительно знающих людей.

[@УралАхмадыкин]

@@МаксимС-т7д этот ответ для тебя. Надеюсь и остальные задумаются и найдут себе правильную информацию.

[@УралАхмадыкин]

Также добавлю большинство тут из посетителей, действительно не знают о тонкостей столярного производства, поведения дерева.Да можно мебель делать и так. Можно и футбол играть плохой командой. Вот вам и сравнение. Смотрите профессионалов и сами растите до них.

[@reaper060670]

Hey man.. I hope ur not still using that Radiator that's behind ur wood lathe.. hahaha!! Sorry but that would be funny as heck man with all that dust. I cleaned out my dust extractor/hoover this morning. Oh my lord the dust is so fine it's dangerous man.. How do u cope with that? I ended up with Conjunctivitis and it's horrific. I developed it and my thoughts are the dust caused it? I don't know if this is a thing in small dusty workshops but my nose has developed major issues too and it's not from snorting cocaine either.. heehee! I'm only joking pal. Watching u in this video I've noticed u have a good dust collection system? That's great man. Mine is pretty much a large hoover and I attempt to use it on everything. How often would u suggest a filter change on these Wet/Dry VAC hoovers. Mine is huge. hOW TO CONTROL THE FINER DUST IS A BIG ISSUE FOR ME. i DON'T KNOW WHAT TO DOC ABOUT IT.. Anyways keep up this great work. I really like these bedside tables.. What wood is this? Red Oak or something like that? I love the colou of the wood u used..

[@MrGriffiny]

Тумбочки гарнюні!!! Ясен топ, обожнюю з ним працювати. Але дивлюсь як без навушників працюєш, аж плакати хочеться.((( Я б мабуть вже оглух.

[@infeelfurniture]

Та я ж у вакуумних, вони достатньо глушать шум, короче як бірюші працюють) Дякую!

[@MrGriffiny]

@@infeelfurniture Оу. Я їх не помітив на відео)))). Я в навушниках Дніпро-М звик працювати. А їх дууууже важко не помітити.)))

[@hugogamerro2061]

Where are you from?

[@bohdanstoian8260]

매우 아름다운, 나는 당신의 일을 사랑

[@infeelfurniture]

정말 고마워 내 친구

[@eidahmed5430]

What type of wood?

[@IsaacC20]

@8:11 Holy sh*t. Plz rethink this cut or some jig to clamp the piece from the top. We want you to keep your fingers for a long time my friend.

[@patrickcottrelle7708]

Same feelong 😮

[@shiawase-man]

😲👍🏿

[@edcarden6086]

Take up a collection and get this cat another light fixture

[@kachunlau9323]

WHERE CAN BY THIS TABLE? Also， transfer to hongkong

[@infeelfurniture]

Thank you for your inquiry, but I may not be able to ship to Hong Kong

[@raymondcape]

Para saan ang iyong ginamit na spray can?

[@infeelfurniture]

This is an activator for cyanoacrylate glue

[@ElCidPhysics90]

Jesse Pinkman woodworking

[@ЮрийВайсбурд]

[@artwellmdineka3424]

less intimidating Brotherhood.

[@Zamboni-0805]

I hate videos where ppl dont talk, but what I hate even more is terrible music for the video. Don't get me wrong, the music was good if I was out with my wife at a club.

[@Woodworking17]

Sorry man... The music killed me... Couldn't watch your video

[@cilofono]

Do you know where I can find jazz music without copyright?

[@infeelfurniture]

In the description there is the name of the song, it is from the phonetics of KZbin

[@домашняямедиатека]

Скол на корпусе чем шпатлевал?