Infiniti JX35 QX60 - Change Front Turn Signals

This video will cover changing your Front Turn Signal Bulb for your Infiniti JX35 and QX60, should it blow. It may seem tricky at first, but you will see it is actually very easy to do. Additionally, if you want to upgrade your front bulbs to LEDs, here is another video that will show you how. • Infiniti JX35 QX60 - ...
Looking for some bulbs? Get them here
PY21W standard bulb - amzn.to/2Fn4fEJ
Trim Tool Kit - amzn.to/2Qg868c
For LED upgrades
LED resistors - amzn.to/2Yk2xKo
PY21W LED - amzn.to/3c1mUlp
Disclaimer
I assume no liability for property or vehicular damage or injury incurred as a result of any of the information contained in this video. I recommend safe practices when working with any and all tools, including but not limited to electrical tools, power tools, pneumatic tools, any lifting apparatus, including jacks, jack stands, and automotive lifts, manual tools, chemicals, lubricants, and any other instruments used within the video. Due to factors beyond my control, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of all above mentioned tools or equipment, or any other items mentioned above, and all information contained in this video is the sole responsibility of the user and not myself or Nexus Auto. Caution is advised and any practices by the viewer is at user discretion. Any tool or part recommendations or links are given for informational purposes only and it should be assumed to be bought at your own risk. I or Nexus Auto assumes no liability for any damages, premature part failures, or incorrect parts made from purchases made online, including but not limited to tools, parts, instruments, jacks, chemicals, lubricants, etc.

[@CineG]

Thank you. We have a QX60 with the right signal bulb that went out today. I can do this myself. Even used your Amzn link for the replacement.

[@NexusAuto]

Awesome! I appreciate that. Happy to hear the video is helpful!

[@carrrieUT]

I had to change the drivers side blinker light and it was even easier… thanks for the video!

[@NexusAuto]

No problem at all. Happy to hear the video helped out

[@cleonhardy8847]

Thanks helped much and I followed the instructions to a tee.

[@NexusAuto]

Awesome. Glad to hear the video helped out.

[@rosesharon5511]

Hi, I like your content on your channel. I was wondering do you have a video on changing the high mount brake light. If not, have you ever changed one, because I have no idea on how to do it. On my vehicle the high mount light went out and I can not find any information on it. Thank you for your time.

[@NexusAuto]

Thanks, I appreciate that! Unfortunately, I don't have a video on how to change the high mounted brake light, and I haven't done it myself. I can tell you that you do need to take off all the upper interior trim on the inside of the trunk lid, as you have to get to the nuts that hold the spoiler on and take those off. You would then have to disconnect any wiring and the washer fluid hose, and gently pry the spoiler off the back of the car, from the top. You'll then get access to the HMBL nuts, so you can take those off and take the Brake Light out. I wish I had a video to show you, but that's the process in a nutshell.

[@weontopdough1008]

Thanks brother..This help me Alot!

[@HWJenkins]

I need to know how to change the left side turn light bulb, around the battery. Thank you.

[@NexusAuto]

It should be the same procedure. It is a little tighter, but the same.

[@bradr8129]

Is this approach accurate for a model year 2015 QX60?? Repair was saying they might need to take the bumper off......$350 repair to replace the bulb??

[@NexusAuto]

Yep, this should be accurate for a 2015 MY. You shouldn't need to take off the front bumper to change that bulb!

[@johnhickel6596]

Thanks, this helped tremendously.

[@NexusAuto]

No problem. Glad it helped out.

[@abbakone9754]

I liked this Video ... Thanks a lot 🙏🏽

[@NexusAuto]

You're welcome. Happy to hear the video helped out

[@xuefenghou6526]

hi ! Mine is 2018 QX 60 !a little different I can’t take the ball out ! How can I do ! Thank you v

[@NexusAuto]

Hi. Sorry, I don't think I can help here. I double checked the service info, in case there was any changes, and for 2018, it should be very similar, just twist and remove. I am not sure why it is stuck, and since I am not there to observe it directly, I could not give confident advice. Sometimes, these bulbs get stuck. It happened on quite a few vehicles. I had to use a pliers to help twist the housing. You can try that, but be careful not to damage the bulb plug or wiring. Other than, I could not help further. Sorry I could not

[@josecalel309]

Thanks man very good

[@NexusAuto]

No problem at all. Thanks for watching!

[@mateopen8597]

hi good videos and I have a question do you know how to change the A/C pipeline service thanks . I need help

[@NexusAuto]

Thanks, appreciate it. For the A/C pipeline service, I apologize, I am not directly understanding the question. What part of the A/C needs servicing?

[@mateopen8597]

@@NexusAuto pipeline assembly is the longest one

[@mateopen8597]

@@NexusAuto is the tube assembly for the AC rear line is very long part one part is complete broke I want install the new one thanks

[@mateopen8597]

@@NexusAuto Pipe assembly -infinti 2013 jx35 (92460-3jA0C) that's the part number I want to change thanks alot

[@NexusAuto]

@@mateopen8597 I will look into it and see if I can put together a video for you. I will let you know shortly.

[@nicksmeltzer2964]

What led did you use? Do you know what ones are compatible?

[@NexusAuto]

It uses a PY21W LED bulb. I think most PY21W led bulbs should be compatible. You will also need LED load resistors as well...50w 6ohm resistors, to prevent a fast flash.

[@flashfotografas3541]

Endeavor to show the headlamps or blinkers before and after the bulbs are replaced

[@NexusAuto]

Unless it is an LED upgrade, not sure why you would need to see the before and after. In any case, I did not actually need to change my bulb, as it was working. So the bulb would look the same. I made the video to show people how to do it.

[@britwhit27]

Thank you! I just called the dealer for kicks and they charge $200-something!

[@NexusAuto]

Damn! But awesome news...some money saved for sure. Glad the video helped out!

[@rosarioladuca8453]

You were prying the clip out with the screw driver against the painted finish of the fender. Yeah you're not working on my car

[@NexusAuto]

Well, good thing I'm making videos helping literally thousands of people and not working on your car. Whatever will I do by not being able to work on your car? I have to sit and think about this a while 🤣