If you guys have the same ebay special as i got: connecting white to red and black to black gets rid of the flashing. It will only light up with the headlights on, and will no longer work as a brake light. Seems better than flashing while braking though.
@hawaiiancitizen2876 Жыл бұрын
I got the eBay one as well. But it’s not working
@damianr0123 жыл бұрын
Thanks it works. Only difference is I did black with black. Red with green and I had white so I did that with red. And it worked. When I had red with red and my white to green. It kept blinking.
@TIRADORACING3 жыл бұрын
Nice!
@iiampj8762 жыл бұрын
Wasn’t sure what was wrong with mine but this comment helped me so thank you!
@RawQfiddy2 жыл бұрын
So after you applied heat to the solder and heat shrink you wrapped each wire in electrical tape?
@TIRADORACING2 жыл бұрын
I used dealership “Flocking tape”, wrapped them all together. Electrical tape will work.
@chrisvelasquez42034 жыл бұрын
GOOD SETUP! Can't wait until my CF rear diffuser gets here.
@TIRADORACING4 жыл бұрын
Awesome! It does look clean I am very happy with the outcome!
@streetterrorperformance62274 жыл бұрын
Clean bro
@TIRADORACING4 жыл бұрын
Thanks brotha! We have a long way to go with the Q50 but this has been a nice start!
@dbsimms632 жыл бұрын
Where did you get that cobra lamp??? I need that!! I have an 04 SVT TERMINATOR COBRA
@TIRADORACING2 жыл бұрын
Hobby Lobby! They always have them too. I got that one in like 2012. But their usually always in stock.
@dbsimms632 жыл бұрын
@@TIRADORACING really? It's not the Shelby licensed one?? I looked at Hobby lobby on line I didn't see any. Do you remember how they refer to them?? I'd really love to find one for my room with all my cobra things
@dbsimms632 жыл бұрын
@@TIRADORACING if you see one I'll gladly pay you for it and to ship it to me in Texas. I'd love to have one for my cobra room
@TIRADORACING2 жыл бұрын
Lemme see what I can find
@geraldomi4 жыл бұрын
Great video!
@TIRADORACING4 жыл бұрын
Thank you Joan! Hope it was helpful!
@bryanportillo47406 ай бұрын
Black and black white and red and red and green is the best set up
@Drenoxian2 жыл бұрын
Nice video! What did you do with the wire from the diffuser going into the grommet? Do you suggest to tape it down so it doesn’t flop around or does it not matter?
@TazZ243 Жыл бұрын
The extended wire, is that from the harness? The wiring that came with my diffuser is super short.
@imzabans11313 жыл бұрын
I have 2018 q50 luxe .. my wires are white , red and black .. would it be the same setup for the wires ?
@damianr0123 жыл бұрын
Had the same wiring. Ended up doing white to red and red to green and black to black. It’s worked perfect.
@HunchoMarc1 Жыл бұрын
@@damianr012 I did that and it works but when the brake is applied it flashes until I let off the brake nonstop
@Kai-gotglow11 ай бұрын
@@HunchoMarc1that’s how it was made to work unfortunately. The flashing feature is cool but it’s annoying
@lechonkadventures66163 жыл бұрын
when i press the brakes it doesn't stop blinking any tips??
@TIRADORACING3 жыл бұрын
No clue. Some others have had similar problems but I really have no idea. If you did what I did in this video then I really have no tips other than double check your work.
@lechonkadventures66163 жыл бұрын
@@TIRADORACING Thanks for replying and i ll double check it
@Vqmo4133 жыл бұрын
@@lechonkadventures6616 were you able to figure this out?
@dontbackdown69383 жыл бұрын
Only install the red and black, it’ll only work when your lights are on but it won’t blink
@fredycastro88043 жыл бұрын
My light blinks all the time the lights are on. Or when i unlock or lock the car it only stays solid when I press the breaks without the lights being on. How can I fix it?
@TIRADORACING3 жыл бұрын
Double check your wiring. looks like something is grounding out or something keeping constant power.
@fredycastro88043 жыл бұрын
@@TIRADORACING I wired everything again and it still flashes. I connected the same way you connected yours.
@TIRADORACING3 жыл бұрын
Well....that’s all I’ve got. I really don’t know what else you could do. Might be a fault with the led and not the wiring.
@lechonkadventures66163 жыл бұрын
@@fredycastro8804 did you fix it?
@fredycastro88043 жыл бұрын
@@lechonkadventures6616 no, not yet I haven’t figured it out yet, it’s still blinking
@dbsimms632 жыл бұрын
Why didn't you use T-taps? Easier and less chance of cutting through the wires. Also, why not use your heat gun for the shrink wrap instead of an open flame? You could have done all three at once. Last pick. Why not use black hardware for the install since it's visible or black screw cap covers? I guess I'm just picky 😂
@TIRADORACING2 жыл бұрын
Yea bro it ain’t even that deep 😂. Why didn’t I just twist the wires together and use electrical tape? I could have used butt connectors too. The auto scene is full of a million preferred ways to do things and everything gets clouded with “the right way to do it is X”. Appreciate the feedback tho
@KeithJay707 Жыл бұрын
@@TIRADORACING there’s always that “guy” who knows everything these the type of people who I would never listen to.
@frantzyfelix5073 жыл бұрын
Hello how are you bro I may need your help here red diffuser with the light same as what you are installing this video but the thing is I don't know if there's any difference because he installed the wiring in the driver side and when I turn all my lights in the car seems like I'm losing power also the diffuser light is still continuous blinking do you know what may cause that problem or how can I solve that problem do I need some type of baluster or something stop it from blinking
@TIRADORACING3 жыл бұрын
Like I told the last guy, i only know what I did in this video with this car. If you didn’t do exactly what I did in my video with a 2018 q50 I really can’t trouble shoot for you.
@frantzyfelix5073 жыл бұрын
@@TIRADORACING okay thank you hopefully that would help me out I will show my mechanic your video and that way hopefully that will solve the issue
@nickskolsky25604 жыл бұрын
Might I suggest washers on the bolts and paint the bolts black 🤙🏼
@TIRADORACING4 жыл бұрын
That or you can use black hardware. Either way you really can’t see it lol
@aidenhayes16842 жыл бұрын
U don’t need a washer with lock tight
@nickskolsky25602 жыл бұрын
@@aidenhayes1684 What ? The washers are there so the material doesn’t rip out around the bolt
@kawasick25722 жыл бұрын
Did the product come with a sticker? Lol just curious
@TIRADORACING2 жыл бұрын
Lol it actually came with a sticker, a lanyard and a bottle opener 😅
@Sliipsy2 жыл бұрын
How’s the 3M holding up? I just installed mine
@TIRADORACING2 жыл бұрын
It held on for like 2 years lol I just traded the car in last Friday. Never had a problem!
@Sliipsy2 жыл бұрын
@@TIRADORACING traded ??!??😭
@Sliipsy2 жыл бұрын
@@TIRADORACING i had a Q in 2017 and got a scat pack after, and i just sold mine after using it for 2 years for the same amount i got it for and got another Q, i didn’t like the scat /: it was a beautiful car but ehhh kinda a let down
@TIRADORACING2 жыл бұрын
Yea man it was a hard decision but we needed an suv. We got a qx50 luxe and we got the same for the Q that we paid 😂. So same boat. I wanted a charger but I had a srt8 charger now the challenger and after looking at them closer I just wasn’t too impressed. The Red Sports are more my style.
@Sliipsy2 жыл бұрын
@@TIRADORACING that’s awesome man, i seen some QX , I’d probably in the future do the same and stay in the Infiniti family, i enjoy it a lot, but no kids yet so I’ll cross that later I’m sure 😩
@yktfv6783 жыл бұрын
I only have red black and white wire on the diff Still connect the white to the green ?
@TIRADORACING3 жыл бұрын
Ooof I’m sorry bro I really am not sure. I don’t want to tell you the wrong thing 😣
@yktfv6783 жыл бұрын
I wired them up it works is just when I hot the brakes it only flashes it don’t stay steady
@Uknkown3.0t3 жыл бұрын
My right part of my tail light went out but everything working fine can anyone help plz
@saintlaurent3672 жыл бұрын
Me too buddy. Me tooo. 😭
@MannyQ502 жыл бұрын
any fix this happened right now…
@OblivvOfficial8 ай бұрын
@@MannyQ50What did yall do to fix it 😭😭
@MannyQ508 ай бұрын
@@OblivvOfficial ended up being a fuse in the fuse box
@tro5k3 жыл бұрын
Looks dope! I'm trying to find one Without the brake light for 2018+ q50, but I can't seem to find anywhere! Anyone knows where to buy one?
@TIRADORACING3 жыл бұрын
Thanks and I do not know bro sorry.
@emilaga013 жыл бұрын
You can find in ebay or amazon
@johnnydavis17723 жыл бұрын
Ebay
@VarozPk2 жыл бұрын
What happens if lEDs go out on diffuser light. Are they easily replaceable
@hblethan53662 жыл бұрын
Ya the lights itself are only 20$ on eBay
@VarozPk2 жыл бұрын
@@hblethan5366 ty bro 😎
@adamscarupa1240 Жыл бұрын
@@hblethan5366 do you have to take the diffuser off to replace the lights tho?
@aaronpunko7778 Жыл бұрын
Where did u buy your diffuser from???
@TIRADORACING Жыл бұрын
Mfr engineering - chassis mounted rear diffuser, you have to call and ask for “Tirado racing spec”
@nikobeatspro38463 жыл бұрын
Do you think I’ll be able to wire the light so it doesn’t flash? I want it to be a clean solid light
@TIRADORACING3 жыл бұрын
I am not sure.
@dontbackdown69383 жыл бұрын
Only install the red and black, it’ll only work when your lights are on but it won’t blink
@louiearceo89543 жыл бұрын
@@dontbackdown6938 didn’t work
@10rackss7 ай бұрын
Red to red black to black yellow to red if you want constant
@adrianboomin3 жыл бұрын
Yooo what up bro !! Which Grit for the sanding did you Use ???
@TIRADORACING3 жыл бұрын
0 grit bro! I’m kidding. Honestly you don’t need to. Just clean it and use the promotor.
@dbsimms632 жыл бұрын
You can also just use a Scotch Brite pad
@TbrG37 Жыл бұрын
Does this fit the g37 ?
@ItsR1C33 жыл бұрын
My brake light blinks non stop when I press on the brakes…
@TIRADORACING3 жыл бұрын
Like I told another guy on here. My model is a 2018 q50 luxe. If you followed the steps I did verbatim there should not be a problem. Idk if Infiniti’s wiring changes between models and years. So if you have anything other than 2018 luxe and you soldered the wires exactly how I did I really don’t know how to fix or change it. 😣.
@ItsR1C33 жыл бұрын
@@TIRADORACING I have a 2018 sport, its the same, lime green, purple, black, red. Its probably not infiniti, but the product itself because I didn’t get mine from vicrez, I just decided to disconnect the flashing and keep it lit lol.
@ItsR1C33 жыл бұрын
Everything works fine, it’s just the flashing is continuous when I press on the brakes.
@TIRADORACING3 жыл бұрын
Hmmm I wonder what the difference is in the led light that makes some not blink or continuously blink. It might be a difference in the manufacturer of the rear diffusers…
@hennyhardawaymt14463 жыл бұрын
@@ItsR1C3 how did you disconnect the flashing? Did you disconnect one wire?
@guillenchris17193 жыл бұрын
You think this would fit on a 2014 Q50
@TIRADORACING3 жыл бұрын
It will not fit a 2014. Rear bumpers are different.
@errol69724 жыл бұрын
Is this a 2018 Q50 Sport?
@TIRADORACING4 жыл бұрын
No it’s a 2018 Q50 Luxe with the 3.0T
@errol69724 жыл бұрын
Oh wow, I have the exact car but without the sensors. I don’t know what the difference is but two reputable shops told me the diffuser is incompatible with my 2018 luxe bumper. I’m having a hard time returning the product to vicrez now, though I love the product and wish it would fit.
@TIRADORACING4 жыл бұрын
That’s really weird I just installed it on a 2018 luxe lol the bumper is different on 2017 and below tho.
@errol69724 жыл бұрын
Yeah, it really is weird. The entire reason I ordered it from vicrez is because I wanted the quality/fitment to be perfect. There is absolutely nothing wrong with the product, it’s jus not fitting properly according to two shops! After the first said it can’t work, I decided to go to another popular shop that installed quite a few of these diffusers. He never installed one from vicrez but it essentially looks the same other than the quality of the carbon fiber. Both times, with me willing to pay $$$, told me it’s not compatible. I’m just shocked that vicrez is giving me such a hard time with this return.
@TIRADORACING4 жыл бұрын
Man send me pics of your rear bumper on Instagram @tiradoracing. I don’t see how it doesn’t fit lol. Have you tried installing it?? Or at least holding it up to the rear bumper to see if it fits?
@cristianmercado36374 жыл бұрын
Bro I’m an electrician and ur terminology for the wires that ur using is triggering me 😅, really good tutorial tho.
@TIRADORACING4 жыл бұрын
Cristian, I am an english tutor for veterans at Texas State University and your grammar is killing me 😅. Thanks for watching though.
@Awsometiger10114 жыл бұрын
Can i put this on my 2014?
@TIRADORACING4 жыл бұрын
I don’t think so, I think your bumper is different.
@Awsometiger10114 жыл бұрын
@@TIRADORACING Do you know how it’s different? Because I saw this guys instagram page and he has a 2017 and has that diffuser
@TIRADORACING4 жыл бұрын
Right.... a 2017. 14-17 are the same 2018 it changes. This rear diffuser is for a 18-19. So it looks like you need to find out where he got his diffuser seeing your model years are compatible. The vicrez website CLEARLY has the diffuser I used listed for 18-19 so do not buy it thinking it will fit lol.
@djml7ml7974 жыл бұрын
Will this diffuser fit on a 2017 Nissan Altima?
@TIRADORACING4 жыл бұрын
No
@chonte36623 жыл бұрын
My diffuser comes with a red, black and white wire. The wiring harness has red, green,white,blue and pink/purple wires. Any suggestions on wiring this? Your help would be greatly appreciated, thanks
@imzabans11313 жыл бұрын
Did you find a way to do it ? I have the same one
@Uknkown3.0t3 жыл бұрын
?
@chonte36623 жыл бұрын
A reply to Zabans, no, red light blinking continuously. I messed up and bought an Ebay special that was not carbon fiber as described & returned it. Buyer beware
@pblomoney4 жыл бұрын
Do these diffusers fit 2017 q50s?
@TIRADORACING4 жыл бұрын
No sir, the 17 bumper is different.
@pblomoney4 жыл бұрын
@@TIRADORACING oh, ok thanks
@briangasataya29403 жыл бұрын
how did you take the two wirings from the black piece clip thats connected to the car
@TIRADORACING3 жыл бұрын
It’s a clip that releases. Your talking about the Eli tricks connectors? Their behind the trunk liner. Remove trunk liner, unclip the harness. That’s it
@Guason402tv4 жыл бұрын
Wish they made this for the Q60 Coupe
@TIRADORACING4 жыл бұрын
I think there are other companies that make one for the q60’s
@southbayautoworkz91174 жыл бұрын
We have them in stock! Check us out on ig @southbay_autoworkz
@dirtykazzy13343 жыл бұрын
@@southbayautoworkz9117 email sent!
@angelt56492 жыл бұрын
Ese difusor se le puede poner al Nissan maxima 2014
@NayrMcDubs4 жыл бұрын
tutorial man
@TIRADORACING4 жыл бұрын
Yes sir! I like to mix it up !
@ijj617 Жыл бұрын
ong i’m not doin that yk how much i should expect to pay for someone else to do all that😅
@TIRADORACING Жыл бұрын
Honestly like 200 bucks lol it’s not that hard
@leninftp91324 жыл бұрын
Will this fit on a 2017
@TIRADORACING4 жыл бұрын
No the bumpers are different.
@themilkman____4 жыл бұрын
Aftermarket part will right ?? check out SouthBay_Autoworkz
@leninftp91324 жыл бұрын
Juan Inzunza already do but wussup w jaliscos carbon fibor
@themilkman____4 жыл бұрын
@leninftp yeah theyre good too, i bought a new steering wheel from jaliscos 😎
@loorahthelegend80523 жыл бұрын
you got ripped off my guy
@TIRADORACING3 жыл бұрын
I mean I don’t pay for these parts at all… my guy.
@TIRADORACING3 жыл бұрын
But if you believe it’s a rip off explain why so others may read and make a decision based off the information your providing.
@loorahthelegend80523 жыл бұрын
@@TIRADORACING Yes sir, I understand the quality of the product is very good but there are competitors that provide this exact diffuser for the Q50 for under $250
@TIRADORACING3 жыл бұрын
That is a very valid point. It’s also the beauty of the market. I would never push someone to pay more if they can get the same product at a better price, at the end of the day we all work hard for our money. My only question would is what is the trade off (if any) for buying at a cheaper price… customer service? I’m not sure, just thinking outside the box. But to be clear you have a valid point.
@loorahthelegend80523 жыл бұрын
@@TIRADORACING You’re a King. Just purchased a diffuser for my sexy Q50 and your vid helped me understand the wiring 😇🙏🏻
@thomasv2207 Жыл бұрын
$654 for a part everyone else sells for $100? You should be ashamed.
@TIRADORACING Жыл бұрын
Whoah buddy I don’t sell it lol 😂 idk what the price was 3 years ago when I did this either. But yea if you can find it at a more affordable price go for it!
@Spokes3282 жыл бұрын
Will this work the same for a 2023 q50 RS ??
@adrians5061 Жыл бұрын
My diffuser light constantly flashes, any idea why
@jhunnin65003 жыл бұрын
Will this fit on a 2018 pure?
@TIRADORACING3 жыл бұрын
Not sure, check out vicrez website or send them an email.