INGENIOUS TOOLS OF THE NEW GENERATION

Mind Warehouse ► goo.gl/aeW8Sk
1) Kapro 257 Ad
• Kapro 257-10 Flex Sander
2) Eclipse Magnetics Switchable Quick Holding Clamp
• Switchable Quick Holdi...
• Magnetic Switchable We...
3) HiKOKI MULTI VOLT 36V
• MULTI VOLT 36V Cordles...
4) Matco LTRV44 - 2 JAW LAZY TONG HAND RIVETER
• Matco LTRV44 - 2 JAW L...
5) Castor AS M-30 (Preview)
• M-30. Magasinerbar kla...
• MTP-pistol. Magasinver...
• Letti enstift kabelkla...
6) Quadsaw
• Video
• Video
• Video
• Video
7) Rothenberger Soft Soldering Device
• MULTI MOBILE Set - Sof...
8) L'Outil Parfait ROLLCUT'®
• ROLLCUT'® - FORMATION ...
9) Romax Compact TT
• Romax Compact TT
• Romax Compact TT
10) Real Avid Carbon Boss AR15
• The Real Avid Carbon B...
11) Dixter 5012
• DIXTER Pulidora Orille...
• DIXTER Pulidora Orille...
12) REEKON M1 Caliber
www.kickstarter.com/projects/...
13) Woodpekers AUTOANGLE DRILL GUIDE
• AutoAngle Drill Guide ...
• Perfect Legs with Auto...
14) Wolfcraft Adapter Connector PRO/Easy
• wolfcraft Einhandzwing...
15) Billy Goat Landscape Auger
• Billy Goat Landscape A...
• Billy Goat AGR1300H Op...
00:00 - Kapro 257 Ad
00:53 - Eclipse Magnetics Switchable Quick Holding Clamp
01:29 - HiKOKI MULTI VOLT 36V
02:21 - Matco LTRV44 - 2 JAW LAZY TONG HAND RIVETER
03:05 - Castor AS M-30
03:56 - Quadsaw
04:44 - Rothenberger Soft Soldering Device
05:27 - L'Outil Parfait ROLLCUT'®
06:10 - Romax Compact TT
06:53 - Real Avid Carbon Boss AR15
07:40 - Dixter 5012
08:34 - REEKON M1 Caliber
09:24 - Woodpekers AUTOANGLE DRILL GUIDE
10:07 - Wolfcraft Adapter Connector PRO/Easy
10:54 - Billy Goat Landscape Auger
For copyright matters please contact us at: [e-mail] Dance of the Pixies by Machinimasound licensed under Creative Commons Attribution 4.0 int’l / @incredible-qq2zi

[@sticustom]

Long Tongs have been around for decades. I’m nearly 60 and my father had these when I was in my early teens. They are great tool for riveting.

[@techaniac]

Ohh maaan, I will need a handyman, hopefully with all the amazing tools you showed me here. Most of these saves a lot of time! 💪

[@andybilakshow260]

Hand sander with "egonomic handle" I'm sold🤒

[@Ratlins9]

Finally, a video highlighting new tools and tells you the price.

[@remplante]

@ 2:46 "5 thirty tooths" ! PMSL. It's called 5 thirty seconds.

[@adriandeward9976]

I think you made a mistake, the grinder attachment, "grinder and polishing tool", does not cost $55,000. That's a couple decimal points off, more like $550.00

[@bernardkavanagh3528]

More like $55 🤣

[@stephenharvey5932]

Have to be much more for $55,000

[@olivergengenbach7138]

or like fifty five hundred

[@Surivman]

Me encanta este canal, siempre se aprenden cosas novedosas

[@coreoncrack]

cable stabler is a very nice tool omg i have done this the old way so many times hate it ! sweet tool

[@cracknoir8397]

There are some clever tools out there i am not just talking about these tools

[@sergioramoneroles5807]

Gracias por la exposición

[@pariah_Ftw]

There's no way that floor sander costs $55k

[@mcorrade]

I thought I was hearing things. There is NOOOOO way that cost that much.

[@mikebashford8198]

The price is in Argentinian pesos - 55k of them is about 450 USD

[@pariah_Ftw]

@@mikebashford8198 that definitely sounds better lol

[@eatledzeppelin1661]

Maybe that is trick? They actually sell new floors. "We can do new floor for 10000$, or would you prefer to buy this bs $55k floor sander instead..? "

[@mikeodwyer7514]

Was just thinking 🤔 that myself ! Who ever came up with that valuation is 🤪

[@brimstonefootsteps4332]

Sometimes the simple and inexpensive ideas are the most ingenious. I do like when you tell a products price during the review so we can decide if its worth the time to go explore.

[@SamieMac1]

Thar AR 15 cleaner is awesome!

[@larszchzsche9070]

The floor sander worked great! I retired and traded my used floor sander for a new Ford f-150 pick up with trailer and 14 foot boat,great huh?.

[@rodneybrand8521]

Good trade..lol..🤣🤣🤣🤣🇺🇸🇺🇸🇺🇸🇺🇸

[@diyfireking]

Perfect 👍

[@user-uj2qj3oc1o]

love new tech!

[@akbychoice]

The exchange rate for the floor sander must be crazy 😜

[@keltonfoster]

You've got to be kidding about a 55 thousand dollar angle grinder.

[@Fumingzeus]

It’s made of gold and the cutter is pure diamond it’d up for $55 K because it’s on sale🤣😂🥲😂🥲😂

[@keltonfoster]

@@Fumingzeus i mean i know that inflation is getting bad but come on

[@frankbiz]

@@keltonfoster It must come with all the floors in a 5,000 sq foot home.

[@gigatheprotogen]

You could but that grinder, or a brand new car @w@

[@redbeard6493]

They had the price In Pesos , just seen it in a different comment haha . Came out to around $500 usd still too expensive for what it is anyway.

[@shivsharma4897]

Very nice information

[@robertpyrosthenes1092]

Five Thirty Tooths? Come on, Man. You speak better English than I do.

[@lindathrall5133]

NEAT TOOLS

[@911kenh]

55, 000 dollars for what is an angle grinder with wheels thats attached to a hoover ? wow...

[@xgreasexmonkey5506]

55 grand for that floor grinder….. I. Don’t see how that is the right price?

[@craigvaccaro3572]

Probably Pesos.

[@skepticbb93]

For 55 grand it better come with the vacuum, the floor and a small crew to work it.

[@eastendyves]

that wouldn't cost more than a couple hundred dollars.. 55k was a mistake

[@mlf3707]

Isn't that what a shot of whiskey and a loaf of bread costs

[@bruce3634]

If it's pesos about 3,600, I looked it up and I found it for 72,000 but it wasn't in English so I converted that

[@ljprep6250]

Did he really just say 5/32 is Five ThirtyTooths? Cracked me up. I'll bet every concrete company owns one of those rebar bender cutters by now. What a time and labor saver. // The $55k sander and the autoangle drill guide are EXTREMELY overpriced. // The Wolfcraft adapter would be worth it if it came with the two clamps, but not by itself. If the connector is $42, the clamps are likely to be $100 a pop, giving you a $484 pair of long clamps. I can make two long 3/4" heavy duty pipe clamps for under $60. The Billy Goat auger is a great system, but given the lack of any pricing on their website, I'll bet they have one comma (if not 2) too many in their price, too.

[@saulogabrielmontanarorosa289]

Bem util

[@simondigiwiz4810]

$55,000 floor sander?!? WTF 😳

[@RupinChheda]

That gun cleaner has the parts labelled for "beginers".

[@voiceofraisin241]

at 9:20. How does that measuring device compensate for the distance between the measuring wheel and the saw blade?

[@Raeilgunne]

you have to zero it yourself. place the wood even with the right edge of the sawblade, and zero the display. then you can use the encoder to measure. you have to re-zero after each cut. I've seen several of these devices on the market, and they are a time saver, just not as integrated as they could be if the manufacturer built one into the saw.

[@MegaTapdog]

i bought one and it did all the work it advertised and when my wife asked me to take out the trash it made dinner dates with all her friends. WIN WIN.

[@bethoughtprovoking]

For $500, you could get a decent drill press; however, the great advantage of a portable precision-angle drill guide is that it can be taken to the workpiece or workplace.

[@Tensquaremetreworkshop]

Or you can buy it in the UK for ~$40.

[@bethoughtprovoking]

@@Tensquaremetreworkshop If you say so, I don’t doubt it. But I do seriously doubt that a $40 imitation can match the Woodpecker’s build quality and precision.

[@Tensquaremetreworkshop]

@@bethoughtprovoking A quality product from Rutlands- how precise do you think a drill guide can be?

[@bethoughtprovoking]

@@Tensquaremetreworkshop You obviously are not familiar with Woodpecker tools and their renowned quality. Rutland sells tools that, for the most part, are imitations of original brands. I know; I’ve bought some myself and have regretted every single buy I ever made. As to how and why one drill guide might outperform another is all about precision, durability, and repeatability. A professional, for example, will pay the extra dollar if it guarantees him a precise and consistent result. But if his use is occasional, or if precision is not an issue, then the $40 alternative is a reasonable option.

[@Tensquaremetreworkshop]

@@bethoughtprovoking I am very familiar with Woodpecker tools. They aim for the 'jewellery' market- pretty tools to impress the impressionable. $500 is, of course, a silly price for a drill guide. Yes, they are very well made, but not value for money.

[@uniqko]

Amazing

[@Fumingzeus]

I used the riveter in the early 80s, definitely not a new idea

[@SiamWoodShop]

I can go back to the '60s when I was in the motor trade using the same riveter

[@whatsit2ya247]

When I started working in the automotive trade in the early 80's we had a compact hydraulic riveter that could install 1\8 - 1\4" rivets in a split second with a pull of a trigger 🤓

[@jameswagner2634]

It sounded kind of pricey for a piece of plastic

[@jordanalexander615]

Don't magnets interfere when welding. They definitely have when I was arc welding.

[@lianefehrle9921]

I like the drill

[@jscherer1976]

5/32 he calls this 5 thirty-twoths at 2:46...lol

[@boss2923]

$55,000 for a grinder? Fock that sheet!

[@dennyjohnson8563]

$55,000 for that cheap floor sander. If that is accurate, I must be missing something.

[@ljprep6250]

And it's a standard rotary (leaving cross-angle sanding marks) which uses YOUR angle grinder! Ridiculous. Fab one up for under $100. And after all that, it doesn't do corners.

[@woody5109]

What’s old is new again…most of these tools have been around for 30 years

[@sanstime]

so cool so cool so cool so cool so cool so cool so cool so cool so cool

[@R.MaxumOff]

😰😱↖️What A creepy exploring I got my friends.... Take a look 😱😱😱😱😱...

[@andrewcliffe4753]

First saw tong riveter 70 years ago

[@jimbob33ism]

55k your avin a laugh 😃 !!!!

[@voiceofraisin241]

At 5:25 why wouldn’t you just use a propane torch? With mapp gas if necessary.

[@sferg9582]

What diameter is five-thirty-tooths?

[@andybilakshow260]

$2,391 a pound plus shipping of 23# The only people who can afford that surely ain't going to get their hands dirty let alone get on their hands & knees on the floor and mess up that $2,000 suit.

[@pracso1535]

Rivets up to 5/30 tooth’s 🤣🤣🤣

[@davekramer4266]

Unfortunately, NO USA suppliers, Castor m-30 cable Stapler..

[@brianconner664]

Porche or polishing/sander? Hmmmmm.

[@dharminder8002]

Where will get clip staper

[@job607]

It is not in the hands of the common man we're good the old fashioned way

[@dragon411320]

that floor sander price threw me through a loop, until I realized they were talking argentinian money, it's like $550ish in USD though. still a LOT for a sheet metal dolly with some handles welded on, can probably do some basic math, come up with your own designs, send them to a local prototyping metalshop and have them cut and weld it for you just to spraypaint and buy some generic casters and still be cheaper with shipping it both to and from shop.

[@rasputinsorphan1260]

2:47 he says "five thirty toots"

[@Freakopac]

55k for a grinder....oh boy!!

[@More-Space-In-Ear]

Wolfcraft adapter isn’t new either and Irwin have been doing them for years, much smaller and way cheaper..

[@ultimatehomestead1466]

$55K for a Grinder ? Really ? $89 at Harbor Freight Bro~~~ ... I got a feeling that Grinder Company's gonna file for Bankruptcy soon .... $55K ....Umph.... Heck with the vacuum attachment , I got a wet vac. Same thing goes for the angling drill guide for $500~~ ... Drill presses already do that ... Harbor Freight , here I go ! Thinking of how I can wipe out 4 aisles of stuff at Harbour Freight with $55,500...

[@MattOGormanSmith]

$89? Just buy 3 of the $29.99 ones.

[@ultimatehomestead1466]

@@MattOGormanSmith lol.... Absolutely !

[@redstoner2006]

3:56 their patented technology is a square oscillating cutter for a drill...

[@Tensquaremetreworkshop]

And they already come for multi-cutters. A lot cheaper.

[@hugh065]

I don't think they did their homework on the floor sander. Definitely in pesos.

[@villyou4809]

I believe it is 55k pesos (Argentine) which is still about $420.00 USD. $420 bucks is still WAY WAY WAY too much. It should be about $150 USD (just the yellow carrier) no tool. IMHO.

[@O.i5]

Surely he mean $500😂

[@arash8664]

plz for the love of god get a de esser filter.

[@mrfu7998]

55000 dollars for a buffering tool? 😅

[@Scott-mq6yj]

I looked up the sander... it's $130 US

[@Lazarus-aap]

7:44 I'm sorry, What!? Are you sure about that??

[@user-jt6tg7vj5v]

Строительство

[@axelwulf6220]

$55,000 for something that is essentially an angle grinder attachment? Get out of here

[@lovelyjubbly1010]

$55,000 for a motorised sander does not sound right, the angle grinder motor at worst is around $1500 the frame it lays in is definately NOT worth $33,500 a mans yearly wage in some places.

[@kipwtaylor1]

Dixter 5012 the price is in pesos...

[@johnlratcliffe]

You just can't decide whether to go metric or imperial can you.

[@javlonbek4121]

👍👍👍👍👍👍👍👍👍👍👍👏

[@saulogabrielmontanarorosa289]

🌻 🌹

[@StephenLobato]

five thirty tooths ?

[@RD9_Designs]

5/32th's? Thirty two-ths?

[@StealyourfaceDead]

Floor sander is not 55,000 usd lmao😂

[@hootiemike3091]

55,000 dollars for that floor sander?!?!? bruh ya fucking right on that lol

[@More-Space-In-Ear]

Those lazy tongs are not new, I worked with them over 40 years ago

[@maxtipex]

New ?

[@sethc6663]

7:42 IF I had a spare $55,000.00 there is no way I'd spend it on an angle grinder and a mocked up holder on castors, that you still have crawl around on your knee's to use. When he said the price my first thought was wow a Tesla lol

[@haraldpettersen3649]

Seth C - It is not USD it is Argentin Pesos 😂

[@sethc6663]

@@haraldpettersen3649 Thank you, I just checked as well, although the OP say's dollars 🤦‍♂️ so the actual price is around $500, makes sense 👍

[@haraldpettersen3649]

@@sethc6663 - I was shocked when I heard the price, I also thought it was US dollars 😆

[@popparock6506]

@@sethc6663 $500 still WAYY over priced!

[@theDeeJayCee]

$500 is still too much, you can easily build that yourself for about $40

[@thunderthegamer4143]

How come everyday new tech is released. Pls tell me this is not recent. If it is recent you must be researching so much. Thanks for your efforts. To upload almost everyday is not easy. Thanks bro

[@themousebouse]

There's 365 days a year, iunno bro but it doesn't seem like a stretch for 10 new products to come out everyday.. probly thousands bruv

[@1Saltyone]

lazy tongs been around years, welding angles to, staplers are easier normal arrow make, crimp tool has been round years,used one 12 years ago,modern?

[@HandsomeBob1000]

I believe that there is a translation problem with the price of the DIXTER Pulidora Orillera 5012. I see the price at maybe $500.00 not $100,000.00. Someone needs to fact check this.

[@otuoxc]

Queridas amizades, sim, Paulo de Tarso diz em seu Livro aos Gálatas 6.14-16: "Longe esteja de mim, gloriar-me a não ser na Cruz de nosso Senhor Jesus Cristo, pela qual o mundo está crucificado para mim, e eu para o mundo..." A cruz de nosso Senhor Jesus Cristo, é o único instrumento, dado por Deus, pelo qual podemos manter o mundo longe de nossos corações, isto é, no chão muito abaixo de nossos pés, e aqui ainda fica mais interessante - nos coloca desprendido, a meio caminho do reino-paraíso-céu, como o criminoso crucificado, que tendo a vitima inocente ao seu lado direito, descobriu a lonjura tanto do céu quanto da terra, mas bendito seja Deus, o humanoDeusJesusCristo estava bem ali, ao alcance de sua voz-suplica: "Senhor, lembra-te de mim, quando entrares no teu Reino." E, ainda repetimos; estando com os pés pendurados, cravado no madeiro, impossibilitando-o de caminhar neste mundo, e os braços pregados também em cruz, não lhe permitindo 'tocar' os céus, pode dirigir com sua arrependida vós; resoluta, intrépida, podendo ouvir da boca do crucificado do meio, relatado no Livro de Lucas 23.42,43: "Ainda hoje estarás comigo no Paraíso...", só por grande exercício empático, é que podemos entender superficialmente, quão inimaginavelmente foram os sofrimentos de Cristo ali por nós... Vejam como é lindo e consolador, quando percebemos que Ele está, como crucificado, junto a nós quando ocupamos em glória a mesma Cruz que Ele um dia ocupou, e sobre a horrível cruz venceu o mundo e aquele que detinha até então o poder da morte e do inferno como relatado está no Livro aos Hebreus 2.14,15 e, no livro do Apocalipse 1.18: "E, visto como os filhos participam da carne e do sangue, também ele-Cristo, participou das mesmas coisas, para que, pela morte, aniquilasse o que tinha o império da morte, isto é, o Diabo, e livrasse todos os que, com medo da morte, estavam por toda a vida sujeitos à servidão. / Eu-Jesus fui morto, mas eis aqui estou vivo para todo o sempre. Amém! E tenho as chaves da morte e do inferno." Entendamos que não é a nossa Cruz, como diz Paulo, é a Cruz de Cristo, a Cruz da VITÓRIA... Se nosso Senhor ali triunfou, nós também em tudo triunfaremos, lembremo-nos que Ele-Cristo é o humanoDeusJesusoEmmanuelDeusconosco‼ Bom tudo a todos, sempre na doce companhias d'aquEle que vive para interceder por nós‼🌹😷

[@justincarter7687]

Yeah that sander I's maybe a 500 dollar tool .

[@darrenc3439]

You need to do more homework, we all know Matco doesnt produce any tools, they merely rebrand and sale other manufactures products.

[@R.MaxumOff]

😰😱↖️What A creepy exploring I got my friends.... Take a look 😱😱😱😱😱...

[@uniformguy751151]

I have never heard 5/32 called "five thirty-tooths" before..."five thirty-seconds" is how I've always heard it called. Someone tell me I'm wrong.

[@brianargo4595]

Nobody is calling out five thirty tooths?

[@connieludtke5699]

I don't understand your measurements?

[@clinteastwood5718]

You got a lot of those prices wrong

[@notacreativehandle]

Dude literally said “five- thirty- tooths”….

[@Arukan]

That 55,000 device is a hand-sander attached to one of those scooting boards they handed out in gym class. Are you kidding me? Anyone could buy a professional 3D printer, schematics, ANd materials and make it themselves for easily 1/4th of that price. smh

[@TheNoparking]

That thing is 55000$ hell no.

[@Splits-man]

$55,000 I don’t think so!

[@metern]

About the Dixter 5012 at 7:40 WTF! 55000$ for a angel grinder on weels. 🤯 They probably dont sell many of them. And thos buying it are stupid.

[@silvk1000]

more like they doesn't even notice what they are talking about in these videos. Like the others in comments said "The price is in Argentinian pesos - 55k of them is about 450 USD"

[@metern]

@@silvk1000 ahh Thats make more sense 😊

[@philosoraptor777]

7:57 Those are ARGENTINE PESOS, not dollars. That's about $500, not $59,600.

[@paralellosll3849]

11: 🤡 $55K!!!! You could no joke make that for sub $100.

[@derickbrown8471]

Do you mean fifty five hundred?

[@MasterBlaster3545]

55k for what amounts to an angle grinder on wheels? 🤣 you could get a mate who works as a metal fabricator to knock up the metal trolley and change some bits on the angle grinder for less than £1k and it would do the same job. What a con job.

[@gigatheprotogen]

I'm sorry? $55,000??? You could have a car, or this "Dixter 5012" tool @w@

[@hardyanpajero69]

👍😎🍺🍩🛠️...

[@badwolfsat5]

Thirty tooth's...lol. It's pronounced thirty second.