Ingenious Woodworking Workers At Another Level // Amazing Woodworking Skills Of Young Carpenters

[@ricaroles]

Mantap bang monggo di lanjud

[@zakframpton]

This is a valuable addition to my woodwork collection kzbin.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.

[@treyconey8258]

The knowledge of that table saw's existence in a shop anywhere, third world country or not, will haunt my dreams for the rest of my life.

[@thatf_inguy8220]

Looks worse than it is. Not saying its ideal but most people run table saws with no guard. This just has more of the blade exposed. Also, fully exposed blades are that uncommon. lots of people run angle grinders with no guard, big saw mills run giant exposed blades, chainsaws, etc.

[@jamesjohnson2006]

As a carpenter of some 50 years I loved watching the craftsman form this amazing piece . Then my son ( who is training as a safety officer ) came in and said "flip flops arn't safe" we love him😃

[@dbcooper4142]

Give this guys a fully equipped workshop with all the latest tools available, and they will conquer the world of woodwork 💪💪

[@ratnoratno7073]

Istimewa.. Inpiratif end kreatif.. Top for indonesia..

[@budwoodman1716]

Love that OSHA approved safety footwear. Unique design,......they actually do look like bare feet. Amazing!!

[@vanschaaykb]

Don't you have a pair of safety sandals?

[@ninoboss8299]

West coast g'z woodworking !!! Very nice job !!!😉

[@thebeautyoflife327]

Beautiful work. Please keep yourselves safe, it would be a shame if one of these talented craftsman could no longer do this due to injury.

[@frankstephens8439]

You have had the right

[@11cor71ll]

We should send some carpenters over there and really show them how to make furniture. Particle board, veneer and staples.

[@kevinotoole885]

Ok, so you’re all commenting on health and safety.........you looking and the wrong thing here! Look at the beautiful wood and what they turned it into. Yeah, they might have machines to do certain things but you got to know how to use them properly. Also, regardless of what they get paid they are doing a job and earning a living for their families. My response was just based on a few comments I read. Anyway, I enjoyed the vid, very satisfying 👍🏻

[@kevinotoole885]

Conal you are right I know it is an economic repercussion of a poorer country.......but there is always somebody at the top coining it in. I suppose I was trying to see a positive. They may earn little and life would be tough but without the skills they possess they may earn less or nothing, and life would be a whole lot tougher.

[@Iankmuin]

rapih juga pemotonganya pas ya

[@imsgoalie1]

These guys are something else! All of their ten-fingered hands are proof positive that the most effective piece of safety equipment might just be your brain/attention. Still, you would love to see them have a little more PPE, guards etc.

[@webbcrafts5736]

very true, always stay focused, but ppe will never hurt!

[@oldtrio1]

ingenious workers art

[@jthomas1878]

next in this series... ingenious ER nurses on another level // amazing life saving operations

[@BestReviewMaster]

I liked their abilities. They should have a website and sell their furniture. When people see how it is made, they will like the quality and buy

[@MrTech800]

wow health & safety would have a field day in the UK.

[@savoldicom]

Wonderful! I build furniture in Italy and I love this your furniture!

[@qaaidmesias3342]

Truly a beautiful masterpiece. God-given talent. May you all grow in success with this and in handing down this skill through generations to come.

[@kathleenmckenna8578]

Absolutely gorgeous! Oh my gosh, I am blown away how amazing this piece is.

[@InformationIsTheEdge]

Take THAT safety Sally's!

[@MrRich-tr5br]

see them then.....kzbin.info/www/bejne/n5CVXoWsosZ-d5Y what really happens here

[@isakeles588]

Congratulations, spectacular.

[@nelsonpaolini6800]

I was mesmerized watching this beautiful table being built by two young craftsman, who despite violating the USA OSHA standards, created this absolutely beautiful table/work of art. I would love to know what their company charged for that masterpiece and what the builders got paid. I suspect the pay was not union standard. Thank you for a super enjoyable video.

[@sheslop888]

I've employed many trades people over many years, and found, with few exceptions, that the more money a person was paid, or the easier their conditions became, the less productive they became, the less reliable they became, the quality of their work deteriorated, and they were less happy.

[@troo_story]

@@sheslop888 so this is the secret of commercial success and personal happiness. On that sliding scale, when you pay them nothing, they will be in a permanent state of sublime happiness. Tell the world.

[@Jesus-ug1jr]

​@@sheslop888wow

[@homedecaration8384]

Good work

[@cnote9958]

Just gorgeous!

[@abo-asem]

It is very nice .

[@allenjenkins7947]

The bloke that impressed me most was the first one, ripping the legs from a slab twice the depth of cut on his handheld saw. I'd be lucky to get them that straight on a saw table. Also impressive, no boots, no gloves, no missing toes or fingers! Imagine the reaction from WorkSafe (or whatever the safety inspectorate is called in your neck of the woods).

[@andrewbobucky4612]

It's actually not that hard. A useful trick is actually to saw on an end first, then you can use that as your guide to start cutting on each side of the faces of the slab.

[@moatazelmasry7040]

Ehm. You are not supposed to wear gloves when woodworking...

[@velianlodestone1249]

@@moatazelmasry7040 Depends on what you are doing, but yeah would recommend against it when using a circular. glove gets stuck in the circular and it takes off a hell of a lot more than just a finger.

[@vc2616]

Good job 👌

[@spaceexposed]

Another level indeed... I love how they are barefooted, that say's it all. Mad Skillz!

[@papak67]

Two men are admiring each other's handmade furniture. The first man says, "My piece was built by a master carpenter with 30 years experience." The other man says, "That's nice, but mine was made by someone who doesn't wear shoes."

[@asadmarji4287]

Two men are admiring each other's handmade furniture. The first man says, "My piece was built by a master carpenter with 30 years experience." The other man says, "That's nice, but mine was made by someone who doesn't wear shoes."

[@wazzap500]

@@asadmarji4287 fk off

[@thedeathcake]

@@asadmarji4287 some excellent copying there

[@erayyerli4107]

@@asadmarji4287 Take a look, I say it's gorgeous amzn.to/3624TSa

[@ninabenson2827]

Wow!!! That's beautiful!!!👍💞

[@user-hd8ej8yx9p]

I don’t even sleep barefoot and these guys are tempting destiny like toes regrow or something

[@BlandongJowo-c4r]

I Love woodworking my friends

[@davidcarpenter9232]

It was amazing watching those Craftsman bring the spirit of that piece to life ... D

[@davidcarpenter9232]

The big beefy joinery ,,, is what I love the most ... D

[@gmtonsingm4722]

How many inches cutting

[@bmankelly872]

That is one of the most gorgeous pieces of furniture I believe l've seen in a very long time you guy's get 5 stars and a A+ from me and I've been building houses and cabinetry for 40 years. Great job guy's!!!

[@wileycoyotesr8623]

It's lovely. The Emperor will be proud of your craftsmanship.

[@WoodworkingCraftsman]

thank you my friend

[@albertosouzapintoarteemmad5328]

No Brasil a muitos anos é proibido móveis de madeira BRUTA e de lei,, oque vocês ouvem por aí é fofoca,, acordem pra realidade, só querem desestabilizar do mundo.

[@mitbgessaelfigueroa9937]

Sg

[@gavirialive]

This was amazing to watch, thank you!

[@Bienen-Welten]

Schickes Teil 👍👍👍

[@jackwagon4313]

Gooood moooorning Vietnam!!!! I'm going to move there... Can I come hang out in your shop? 😁 Festool domino ... Eat your heart out... I just learned a new joint and saved $2000

[@2007bowman]

Festool domino are overrated. Simple, but reliable, tried and true joinery - done with traditional hand tools. Furthermore, they true up the piece - eliminating most of the Squaring, Aligning, and tweaking while racing against your glue setting.

[@scottclark798]

Imagine how much those huge slabs of hardwood would set you back in the States !

[@hawkins1985]

And then double it again if you're in the UK!

[@jackwagon4313]

Has anyone else been able to figure what kind of wood they use?

[@yankee2yankee216]

@@hawkins1985 taxes?

[@myarchus1]

@@jackwagon4313 the wood looked rather fibrous to me, so i'd guess mahogany

[@hawkins1985]

@@yankee2yankee216 not really taxes, hardwood is just generally expensive. I guess its less abundant over here and is largely imported. Probably why timber framed houses are rare, brick and block construction is much more common and cost effective in construction here

[@michaelchasse2645]

These guys clearly know their craft, but that table saw is terrifying, and overall safety is nuts. Wiping off the lead edge of that shaper is crazy. However you can't argue with the final product.

[@Fly_Straight]

Even with a set square I strugging cutting slices of bread straight. Well done boys.

[@dozer1642]

Just really pretty. Nice work.

[@WoodworkingCraftsman]

thank you

[@wyndiefeatherstone948]

WOW!!! The work these men do is totally amazing! It makes me wonder what are they paid for making something so fabulous! I doubt it is much!

[@MKahn84]

That are not paid nearly enough!

[@chandrasgekaras1322]

äip

[@joycethiery2488]

No American would do that kind of work for the pay they get. Not in a factory anyway

[@joandow5627]

not nearly enough!

[@stukkak1976]

Seems they can't afford even shoes.

[@salemstvmixedvlogs]

Very skillful WOODWORKER

[@joenavanodo3780]

I don’t often go barefoot, but wen I do I make sure it’s when I’m working in my wood shop with my chipmunks as my little helpers

[@webbcrafts5736]

haha you gotta protect the toes!

[@glennfreeman1860]

I have let some of my woodwork colleagues know about this site [Link Here== *TopFineWoodworking. Com* ]. I was especially awed in the wake of experiencing the outlines and plans that were incorporated into the bundle. This is the best item for any woodwork devotee and shed manufacturer out there.?

[@uncleBE3F]

ALVIIIIIIIIINNNNNN

[@woodworkingbn8528]

Cool project

[@pericodelospalotes3990]

@@webbcrafts5736 n, y r4 ve D DROGAS R ET CU8 6

[@marcleysonrodrigues2119]

Excellent work. The most instructive thing I’ve ever seen on Benny Hill.

[@LovemeAquarius]

The best Makita circular saw commercial ever made ))

[@catchphillies]

Was expecting all hand tools. These guys have a cnc, plus all the power tools a carpenter in the states has. Nice work but nothing a professional carpenter can’t do. What I am amazed at is this was all done barefoot.

[@frankstover3444]

Beautiful job brother 🇺🇸

[@RDAUGIRD]

I don't know if "Ingenious" is the word I'd use, but definitely skilled. What's more amazing, they have all their fingers and toes...

[@firstbuck4089]

OH great! Let's hear it from all the western quasi- semi- non skilled word workers who have to let everyone know how much they know about safety. Well give yourselves a big pat on the back, and then fall on your knees and be grateful, that you didn't have to grow up in such an environment.

[@benniehines2322]

Just build a woodshop. After watching this I may have to shut it down. It is no longer true to call what I do art.

[@encantadorambrosio4888]

Cómo se llama ese mueble?.

[@kathdiyetoirinakshaghor]

Welcome to our KZbin channel, dedicated to woodworking and woodcraft techniques. In this channel, we will share with you in-depth knowledge and skills about woodworking in an easy-to-understand way. From basic techniques such as a step-by-step guide to cutting, sanding and fixing wood, to advanced techniques for finishing and staining wood. Whether you're a wood artist, looking for a new hobby, or just curious about woodworking, subscribe to our channel to stay updated on the latest videos and learn the best skills. We aim to become a source of inspiration and valuable resources for all those who love the art of woodworking. Join us on our journey to the world of wood and woodcraft...

[@Thorinox]

I always love watching the craftsmanship in these videos but it never ceases to amaze me on how much these people put themselves in danger, you wouldn't see a business like that EVER in America, its illegal to not wear shoes in the work place with this kind of machinery and no gaurds on some of them machines, like at the 4:07 part of the video, wtf, they are asking to lose a few fingers there, and I've seen it happen, even WITH a guard on it.

[@daveat191]

"You wouldn't see a business like that EVER in America" YES and thank God for OSHA

[@newhampshirenate]

It's communist Viet Nam. They're also not getting paid, all goes to the government. As does video revenue.

[@nissimhadar]

@@newhampshirenate Are you serious?? Vietnam has 35 Covid deaths, the U.S. has 500,000. Remind me - what is so good about "capitalism" and "democracy"?? Where did you get the idea that they are not getting paid?

[@richardnapper2074]

BEAUTIFUL!!! Great job.

[@evir02w]

Health & safety at its finest!

[@trevorpaulson4205]

It was fine up until the table saw with the retrofit 14" blade and literally no guards or insert. My butthole is still clenching

[@fuzmaginty5822]

health and safety has gone mad 👍

[@franciscovalles8905]

Beautiful job. Thanks

[@artcher5291]

That poor kid spraying with just a gaiter mask. His lungs will be solid before he's 25.

[@leonelo3624]

This is one thing I notice no proper mask for the fumes of the spray of varnish to sad for the kid

[@dongpelsscorpiousmusique]

the business owner should watch the welfare of this amazing woodworking people 🤣✌️👍

[@ztej]

Beautifully done

[@lorimangold2890]

This has a lot of empty cavity, there should be a secret panel in the bottom, underneath the desk/ table to store something important, it is beautiful

[@jefffung8679]

The bloke that impressed me most was the first one, ripping the legs from a slab twice the depth of cut on his handheld saw. I'd be lucky to get them that straight on a saw table. Also impressive, no boots, no gloves, no missing toes or fingers! Imagine the reaction from WorkSafe (or whatever the safety inspectorate is called in your neck of the woods).

[@micheallowery886]

@@jefffung8679 g f"

[@micheallowery886]

@@jefffung8679 eter'

[@micheallowery886]

88888888o.o 68888

[@FranciscoGarcia-xb4il]

Á. c

[@fredjohnson4]

While living in Indonesia I watched craftsmen do similar, but with no power tools. they used to use broken coke bottles to scrape spirals into 4 posted bed frames. They also allowed me to help them which was totally awesome. Anyway I really appreciate the old world craftsmanship that we lost over here in the states. I also appreciate the respect of working with safety guards. We do way to much protecting the gene pool...

[@thebigquestion]

I've watched a few of their videos and despite safety, they're at one with their environment. Also, love the dust drawing waterfall! Only I wish sometimes... always... that maybe they should let the wood speak and oil it rather than covering it with colour. Just personal preference. Cool pieces.

[@pawirochannel8654]

good looking

[@makkfitty1627]

The secret in any trade TO START YOUNG

[@webbcrafts5736]

SO true

[@spacewalla3574]

And hope you grow old

[@shawnmay8073]

15 amish taught 49 now I remember saying I'll never get to be like that. 5th generation craftsman. My grandpa would sit and stare at all his boards before he started. He would wave his hand across the boards along the grain. Never being able to ask him he passed soon after I started but at 29 I watched my exwife grandpa that was a true master craftsman that specialized in period furniture repair, he would stare at his work for hours looking at the grain, he said to repair period furniture you must use period lumber . I'd ask where he got all his of every variety quarter shawn, tiger , etc he said for 40 years him and his wife would travel from auction to auction up and down the east coast and buy the contents of their lumber packed seating barns everywhere. He would show me the grain difference in virgin timber to today's turn around lumber. He showed me how to follow the grain and it had to almost match perfectly. I would ask why he didnt use the top of the line expensive tools ? That's the day I began to understand a master craftman compared to a wannabe craftsman. He had 3 girls no boys so I guess I was the only one that was totally excited about learning from a true master. He sent me home with a box , same box he was sent home with. He told me to take it home learn to use the same tools that craftmen for 200 plus years used to make the very furniture in museums and mansions the world over. He got very sick the next few months but we still would explain to me how to set cutters or the angle each piece needed sharpened at. He showed me how to sharpen crosscut saws ripping saws, etc. He would tell me to look at all his furniture in his house, he was always open 24hrs a day for antique dealers that used US. 40 National road, He was bed ridden now and told me dont listen to the blow hard wannabes but never just go off half cocked chopping and cutting before you ask both pieces if they work well together! Now some will laugh but others know woo is alive till you burn it to dust. He died right after that and my in laws didnt care that he left alot of his hand tools and sold his entire wood stock of period virgin timber to a guy from west virginia for 1200 dollars. 40 years of collecting every variety of wood he could buy only for this guy to use it to build a shed. They sold his entire antique collection even his entire hand made Windsor chair collection, in 5 rings at once. I even had to buy his carpenter box he gave me and the old worn out carry around Carpenter boxthat is rotted at the bottom it hangs over my bed to remember theres two types of craftsmen there are master craftsmen that feels his craft and wannabe new age slapstickers that make fun of the craftsmen with worn out tools no shoes but they have sawdust that runs through their veins. So before you poke fun at these craftsmen, remember those saws and tools without guards that man started with give them your fancy tools and they would probably get hurt faster. I have yet to see a video of your one hand or missing finger craftsman but I can call 5 guys that have OSHA APPROVED TOOLS WITH 3 AND 4 FINGERS. So god bless dont for get talk to your piece before you start only true master craftsmen understand GOD BLESS

[@jagdishprasadkhaitan4815]

Fantastic masterpiece woodcraft skills.

[@raimundoferreira7626]

On another level , have you ever worked on something that require to cut wood in your life ? Don’t have wait for your answer , no you didn’t !

[@russellblake1136]

Beautiful Just beautiful

[@gmann1233]

Next up: Amazing one handed woodworkers!

[@ronwilliams329]

Love that "old school" dust collection system you boys got over there ---- over here we call it a "broom". Don't come any cheaper and simpler than that. Can't bless off on the company operations as a whole due to the lack of safety and other PPE considerations but the outcome of that table was outstanding! That piece would catch a pretty good price over here in the states!

[@abdullahelmuhammed7989]

👍

[@lf3566]

Beautiful!

[@Kirkland-rv5jf]

I bet that table saw has claimed a few fingers over the years. Kick back anyone?

[@2007bowman]

Look closely, The blade is going backward. Think it's been modified - so maby no kickback, but ! ! !

[@judgedeath2709]

That table saw terrified me.

[@adapalasreeramulureddy772]

Super

[@spaight711]

I too like to use a circular saw instead of a bandsaw to lop off large chunks from a raw slab and am sure to grip it by the blade guard, that way I can get my fingers as close to the sharp parts as possible...

[@juanmanuellecompteruiz6419]

Beau travail. BRAVO !

[@protork9785]

Very best Crafted table.

[@johnmoore6410]

Remember the no safety days, didnt need a harness or safety line, Dont fall off, now takes 4 hrs to get through the permit system. Still get piper alpha mistakes,

[@58jennypenny]

gorgeous piece of furniture

[@EvoS76]

I’m not going to lie, that is an amazing work of art, however, I have kids so it would probably be used as a changing table and be covered in permanent marker in no time.

[@MKahn84]

Just ask them to put an extra two coats of good, clear gloss polyurethane varnish on it. It would make a good changing table, and every year or so you can clean off the marker with very fine steel wool then, add another coat or two of gloss polyurethane, and polish it. Then, if you prefer a satin finish, just rub it down with #0000 steel wool. I always use gloss polyurethane and use the #0000 steel wool trick if I want a satin finish because satin polyurethane has additives to dull the look, so when you start applying more coats, it starts looking muddy.

[@LedzeppelinDogsGuns]

yep. cant have nice stuff with kids

[@magalimagalivanheukelemvan4189]

군복어디서구했냐 ㅋㅋㅋ

[@rachmatt6340]

Lucu banget@@magalimagalivanheukelemvan4189cramah. Ustat. Udin

[@stukaman1162]

What amazes me about these craftsmen is their ability to cut dead-straight lines without a guide rail. Amazing.

[@salarjaff9689]

Thanks dear for your beautiful job 🙏❤️

[@seantyree8443]

osha would have a field day at that shop lol

[@outboardfixer]

Yes a bunch of people that never done manual labor in their lives making up anything they can think of to justify their jobs and make it IMPOSSIBLE to do ours.

[@alanberry1318]

I have enjoyed every one of these videos. To anyone who loves working with wood they are both inspiring and challenging. Really pleased to see that the wood real wood and not veneered MDF. Thanks for the upload.

[@adrienlanglois4963]

bravo, cà c'est du travail d'artiste..

[@funnyanimalworld2051]

rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575609089&toolid=10001&campid=5338719083&customid=2402969&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FMilwaukee-M18-Li-Ion-6-1-2-in-Circular-Saw-Tool-Only-2630-80-Recon%2F282555647491%3Fepid%3D2255983937%26hash%3Ditem41c9a10603%253Ag%253AM0EAAOSwnfFdMac6%26_trkparms%3D%252526rpp_cid%25253D5d4455ab5aab8057c9df9f21

[@funnyanimalworld2051]

discount on woodworking products

[@THEDUDE0410]

Magandang umaga good job

[@michaelpieterse2537]

Love the safety gear , no boots , no goggles , no earmuffs, no push sticks on planers . I wonder many get injured

[@guachingman]

a steady supply, but there is always more to replace them, life and labor is cheap over there

[@eduardosantos7777]

9993orqi

[@ivanharris9986]

@@guachingman )

[@Kg98914]

Fantastic table ! May be the scariest table saw I have ever seen : )

[@Spencer4686]

My Health and safety alarm is going off on a whole new level watching this.

[@L--inhNguyenBaoTran]

YY

[@JorgePetraglia2009]

Amazing workmanship. These guys are true artists. They are very good, as well, making safety boots, mine came from those countries.

[@GC-rf2st]

That’s what i like to see Safety Sandals in the workshop, now that’s real PPE, non of this softy steel toe cap rubbish

[@Busted.Knuckles.Garage]

Bare feet, toughens a boy into a Man, of Today's World, lol to hell with a Bar mitzvah (Nothing against the Jewish peeps, just used it as a metaphor, being like a man and all) Safety is for New Fish. Fellow Craftsmen Andrew

[@2007bowman]

I get it - I do. I began working in a cabinet shop at 14yrs old. Been at it long these fifty years. However, this old carpenter must credit his Kevlar Toe boots for multiple instances of toe retention. These poor bastards are virtually disposable to management. Liken them to the lifespan of mid-evil workers, 30-40 years. The spray kid with bandana over his face will surely die very young. Even in Modern American shops I witnessed two guys lose 4 fingers within one year. I watched our Finisher, (spray kid) in a proper spray booth, wearing respirator, got cancer - transferred to the office, but died a few months later. To my horror, 5 years later - his replacement suffered the same fate. Once heavy machinery fell on a guy - broke his leg, pieces of bone sticking out. never saw him again. This stuff is no joke. Never let anyone shame you into forgoing Personal Protection Equipment. Blessings All

[@GH-71]

What a amazing work! Congratulations!!

[@ericwilliams7374]

No toes were lost during the filming of this video.

[@larrymansfield9393]

I’m betting safety is covered. Beautiful piece of work.

[@abdullahelmuhammed7989]

kzbin.info/www/bejne/mYDEk2B9ebKrjNU

[@michaelwarwick9930]

You obviously know nothing about safety in the workplace. :-D

[@justwoodwork4337]

Ingenious ? This is pure art !

[@maverick5059]

Maybe he is ingenious but he's lucky he's got all his arms, legs, fingers and toes. Some serious safety issues here.

[@ИгорьБалхудер]

Молодцы, ребята !!!! Очень красиво 👍👍👍👍, мне понравилось.

[@sarsbrooks4813]

MAN - THAT PIECE OF WOOD - COULD'VE MADE A GREAT COUNTERTOP - AND - CUTTING BOARD - ALL IN ONE (1) - GREAT JOB THOUGH

[@wyndiefeatherstone948]

I thought it might be an alter at the end. In the beginning I was thinking table.

[@Rocketrich88]

I can’t even cut a straight line with a table saw and a fence... WTF...

[@kelvinlious2491]

Oh that's great. I like the video. It's really interesting. I have been in a program for a while and had access to 16000 woodwork plans with lot of videos. I also get live calls and videos too . I have done a lot of projects with this. If you want to get it let me know

[@SW-fk6jk]

WOW! What does a piece like this set me back. I'll pay just about any price!! Very nice craftsmanship.

[@badvock1]

He's got chipmunks helping him! .... I can hear them in the background!

[@RichardGirou]

Really great workmanship.

[@paulkelly1702]

I don't know about you guys but I lost track of how many times I said to myself - Holy SHIT!

[@jimtownsend7899]

I'm thinking Vietnam or Thailand. Can't quite make out the lettering on his shirt, but it isn't Tagalog (Philippines) or Chinese. Yeah, cringeworthy from a safety standpoint. Aside from the obvious ones (bare feet, hands around the exposed table saw, hands on the circ saw blade guard, etc.) are the guy lacquering his eyeballs, the guy rounding over the base frame with his "I won't get wood chips in my eyes if I squint", and leaning on the board going over the jointer. Yeah, buddy, that's a recipe for body modification!

[@nguyengiang__1102]

Việt Nam it is