iniBuilds A300-600R(F) ON THE LINE - The Training | Episode 1 - Part 1

Hello everyone,
We are introducing a new ground school type of videos for the upcoming iniBuilds A300-600R(F). In Episode 1 and 2 of this series we will be going the through the systems, SOP and a walk-through of the Airbus A300-600R(F). We are hoping to make these videos as in-depth as possible for you guys, so you can learn more about this amazing aircraft.
Welcome to the best experience in X-Plane 11: The iniBuilds A300-600(R)F ON THE LINE - The Training
Find more information here: inib.uk/a300
The Training Series Playlist: inib.uk/A300TheTraining
Join our Discord: inib.uk/discord
Check out our forum: forum.inibuilds.com
Facebook: / inibuilds
Twitter: / inibuilds
Instagram: / inibuildsofficial

[@gillesroulin2375]

Have 1 word to say, AMAZING. These is for me the best Plane for X plane 11. And most nice part is that it brings me close to my Dad that passed away but used to work on the A300 on Maintenance

[@CaptBmckay]

May he continue to rest in peace my brother.

[@gillesroulin2375]

@@CaptBmckay thanks brother, big hug

[@albomaa]

I really like the fact that you made these videos, they are a lot of help to people like me who knows a little or no things about older planes (in terms of how to fly them)

[@jbu4956]

Everything about inibuilds is just extremely impressive... thank you!

[@facethefaceandmore44]

I like this guy, and can't get enough of these videos. The balance between practical tutorial and historical systems philosophy is spot on. I bought the a310 after quite literally 10 minutes of the a310 introduction video he made. Each additional video like this will equate to a hundred more sales for iniBuilds (and keep your existing customers happy). Make as many as possible and give him a pay rise.

[@MaxRank]

This quite literally just set a whole new bar. The other devs better pay attention

[@anijeetkanjilal4183]

*cough cough* flight factor *cough cough*

[@n1msu]

I'd like a more realistic eng trim mode too as an option please. Things like this help me to learnm systems better, for example when I got the hotstart TBM I couldn't start the engine for ages without setting the engine on fire constantly. You'll find that someone paying 85 pounds or whatever currency will want this to be realistic. Not a carenado copout. Awesome video too by the way, very easy to follow. One of the few YT training videos that's kept me engaged through to the end!

[@rianrj]

Incredible! I bought the A300ST and looked for this tutorial... Just amazing. Not only explains about the operation of the airplane, but also its systems!

[@champathogme8109]

Chapeau! This accurate and unparalleled introduction is already worth the price of the product!

[@lenkradfreek9295]

The fact that the IRS aligning time is actually modelled accurate to real life really blew me away.

[@signmanbob3834]

Wonderful video! I haven't even installed my A300 yet until I watch these videos and become a little more familiar. These videos are a great asset to the simulation. Thank you.

[@aradoc3951]

33:50 so basically a self destruct button. Would be fun if there would be a option in tablet to turn it so the engines really get ripped.

[@smokey4049]

Watching these so that I am prepared when the a310 comes to msfs

[@yosri2005]

Thank you for providing these tutorials. I think this should be the new standard!

[@federicodamesagne]

Outstanding...really useful. Thanks a lot for all this stuff

[@Sgoburgos]

Great job! I'm enjoying a lot with this plane. I hope you continue developing planes like this one! Waiting for A310 & A380. Thanks and congrats!

[@kjhnor]

Just fantastic.

[@tomb8430]

Just bought this today.... lovely aircraft. Some learning to do.

[@rogermoore52]

What a magnificent tutorial on what appears to be an excellent aircraft. Great explanations and Airbus theory. Congratulations on your new aircraft being so well received by content creators. Well deserved. Looking forward to more Airbus, hopefully on MS as well?

[@vicrobinson1366]

Excellent well spoken informative video

[@Spacewind66]

Verry interesting Video

[@ItsJustMeMusic]

add a mode for the engine trim, so that in the “realistic” mode it will actually explode.

[@talonkellen3043]

pro trick: you can watch series on flixzone. Been using them for watching loads of movies recently.

[@edwardluca6713]

@Talon Kellen Yup, have been using Flixzone} for since december myself =)

[@samsonandre1486]

@Talon Kellen yea, I've been using flixzone} for years myself :D

[@giovanniprspotter]

Amazing video! I wish we could get an Ini a330 lol, we gotta get a good a330!

[@marshall1864]

On MD-80s, putting the retractables to off+down added a bit of descent rate, per a captain on type. Perhaps the thought is the same for this.

[@facethefaceandmore44]

Came here to say this too.

[@MahlonBouldin]

Loving the A300. I know is this a long time after the fact, but did you ever point to the "other content creator" you mentioned for standard operating procedure tutorials? Thanks!

[@jeanluc_dus4179]

You sound like Wheatley from Portal 2. Cool voice!

[@filippoma2097]

13:48 , not strobe, but storm (light) :)

[@AdelHaiba78]

Thank you very much, one question sir, videos 8, 9, 10 are marked as private videos, is it normal or there is a copy right issue, please check. Regards

[@Thoar003]

Can these tutorials apply for the A310 as well? I want to watch these tutorials to get acquainted before I buy. Thanks

[@Aleksandar6ix]

All the detail... And you forgot something! Orange and white balls on the center window pillar should be in 3d to allow us to set a realistic pilot eyepoint view. Even in sims, I try to use those like real pilots to set my view up, then adjust as required for hardware. The seating position in your plane seems low, but I can't tell for sure without those alignment balls. Seriously considering purchase!

[@cromwellthesynth]

Once you get the hang of it how quickly can you get this thing rolling realistically? Cuz 40 minutes sat on the tarmac is quite the while, frankly XD

[@basslinern7523]

Hello ! Thank you for this serie. I have trouble with my A300-600: when I switch one or both trim pitch switches on, it (they) turn to off after a few seconds. Though I am carefully following this video... I found nothing about this issue via google; have you any idea to help ? Thank you :)

[@rafapiloto195]

please do a DC-10

[@didierdebaere7193]

When will INI make it available to us P3D V4-5+ users? For democratic reasons it would be nice to have this available to us as well.

[@pa4tim]

I think the meter readings while charging the batteries is not correct. If you look at the voltage meter, you see it drops if the green battery light goes on. To charge a battery you need to apply a voltage higher as the battery voltage.

[@Aeroflot1990]

HELP!!! I don't connect external power. Parking brake is On, Chock is Set. A300 v2.01

[@faridhemdaoui1901]

Hello Ini builds, A release date for this beautiful aircraft ? Regards

[@schillischote]

No, not yet. Sometime this month, no further details

[@schweinekillerlp2245]

This month.

[@infof2519]

Today

[@GhostSheep96]

Unfortunatly I cant find any information about how to load a Company Route.

[@GhostSheep96]

Its a real beauty, but wth, 91€ including taxes o.o

[@lucafiorini3210]

I need help with the pitch trim, it just won't stay on. I watched many tutorials on YT but I still have the same problem. Can someone help me?

[@Sh4d0s]

Did you find a solution i`ve the same problem ?

[@lucafiorini3210]

@@Sh4d0s Hi, yes I've found the solution. To activate that switch you have to align the IRS first. To do that you have to move the IRS switched on the top of the overhead like he does in the video. But you also have to insert the departure and the arrival airport in the FMS, after that you will see the "ALIGN IRS" button on the same page. If push it the IRS will start the alignment, it should take about 10 mins in real life, in game you can make it align in 5 minutes or less by going on "settings" on the tablet on your side. I hope I was clear. If I was not just text me again, I'll try to explain it in a better way! 👍

[@Sh4d0s]

@@lucafiorini3210 yeah i figured it out thank you . Its a bit confusing because it is different to the video. I think it changed with recent updated. Happy landings

[@lucafiorini3210]

@@Sh4d0s Yeah I think too, glad I was helpful! Cheers!

[@mattwalker5289]

I’m with the crowd that wants the option to blow up the engines due to engine trim mismanagement 😄

[@aviatorboss9978]

my a300 doesnt work anymore,when i hit switches they activate but dont flick,also when trying to select ground ops they dont activate

[@Aeroflot1990]

I have this problem too. Do you solved this problem?

[@aviatorboss9978]

@@Aeroflot1990 reinstall

[@Aeroflot1990]

@@aviatorboss9978 I found the reason. Conflict with SAM plagin

[@aviatorboss9978]

@@Aeroflot1990 i havnt had any issues with sam

[@CptLee33]

If I win the giveaway, I will do a review myself. :)

[@herrboeing]

release for FS20 pleaaase

[@79-airtime54]

Yup I need exploding engines here. Do it.

[@ByT1mothy]

Please also develop for mfs2020

[@evidenceplz]

yep. no flight sim developer will get my money from now on any longer unless it's natively developed for MSFS. I've uninstalled p3d and xp11 already.

[@blumac9801]

EvidencePlz already? Wow

[@evidenceplz]

@Lachlan Bray I never said XP is dead. I wasn't even talking about that. All I did was letting the dev know that if he wants my money, he ain't getting it unless and until he makes it for MSFS. He can make it for XP, p3d, infiniteFlight or whatever but I'll buy it only when he makes it for MSFS. This way I'm giving him feedback about his work and possible revenue estimation, which will only help him. I don't care if he sticks with developing for XP only. He's selling a product and I am helping him by telling him the reason as to why I won't be buying it.

[@chahal_s]

@@evidenceplz oh no whatever will they do without you pumpkin

[@Modswanted]

@@evidenceplz FS2020 is nice, but just a game. XP is a SIM... no more words needed.

[@didierdebaere7193]

I use P3DV5 and want this aircraft. I have no intention having to spend thousands of euros to change all scenery and addons to MSFS all over again. Why not make P3D users have this and the A310 Available too.

[@Michael-ui4ui]

this guy sounds very suspect :)

[@herrboeing]

I already bought my FS20 and uninstalled the XP11 and P3D, please release this perfection for the FS20 too