2.4 GDI HYUNDAI KIA engine assembly. Engine rebuild. Ремонт G4KJ Київська область. Продаж двигунів.

[@hardlymovingpro]

Excellent rebuild. Doing the lower bearings on the same engine.

[@krzysztofniedzwiedzki8061]

Just found today same thing on my copart purchase... 🤦‍♂️Next weekend will be busy...

[@hardlymovingpro]

@@krzysztofniedzwiedzki8061 I partially rebuilt a Theta II GDI engine with a spun / worn out connecting rod bearing for the # 4 cylinder. The crankshaft connecting rod journal was also damaged / marred with metal from the worn bearing. Also found the oil pump was no turning easily by hand. The oil pan had a layer of metallic sludge both silver and copper colored. Its my belief that the insufficient oil pressure from a failing oil pump was the cause of the problem. So I got a used crankshaft and oil pump from a donor engine that had a blow head gasket. We installed new crank and rod bearings for the crankshaft and hope to have the engine running tomorrow.

[@krzysztofniedzwiedzki8061]

@@hardlymovingpro Will try to remember to post what I will find in mine...

[@hardlymovingpro]

@@krzysztofniedzwiedzki8061 Follow up result: Installed the engine with the donor crankshaft and oil pump with new crankshaft engine and connecting rod bearings. Took a few attempts before the engine fired up (believe the GDI injector pump had to build up sufficient pressure). A lot of black soot spit out of the exhaust pipe before things began clearing up. What I did before installing the engine was to clean up all the carbon residue accumulated on the the intake valves use both a thin tip screw driver and pic tool. Using both a vacuum cleaner and compressed air, a lot of carbon was removed. I then coated / soaked the intake ports and valves with CRC GDI intake valve cleaner. I read that the PEA chemical in the solvent soaks into carbon residue that flakes off during engine operation. That, I believe, is what cause all the black soot to blow out during initial engine start up. To date, the engine has been running great! No ticking or knocking sound, the idle is very smooth and the engine is peppy. By the way, you used a oil pump from another Hyundai that doesn't use a balance shaft? To make it work, you also had to use the chain and sprocket to make it work? I'm going to link your video of this rebuild to my video to show my subscribers what's involved to rebuild this engine.

[@josmeralvarez]

What is the torque for those bolts ?

[@MrOsfaso]

Thanks! This will help in my next rebuild.

[@blackenigma1054]

Heyyyy! That was pretty neat!👍🏿😂

[@myshawnsmith5596]

Where did you get all the torque specs for the rebuild

[@old-red]

Nice video but you skipped the ladder frame and oil pump assembly

[@gabrielpastor9044]

Did you balance pistons and rods in all this process? Right now I’m doing exactly the same job I just read pistons and rods needs to be balanced for optimal engine performance. Is that correct? Thanks

[@MCGAletsgo]

good job sir

[@cesaraugustonichoalsamora4579]

Lo malo de estos motores con block de aluminio es que se dañan las roscas del block a la hora de torquear los pernos de la culata

[@familiadinizemwashingtondc3072]

Thanks for the video, is that red regular grease?

[@InjectorMaster]

@@familiadinizemwashingtondc3072 red line assembly lube

[@edgardobautista650]

Exelente curso gracias

[@jesus.oscarvigas2026]

Hola, ustedes en que ciudad estan ubicados?

[@my2centsrc202]

Do you have a list or schematics of the bolts of the torque pounds? Do you have a list of the torque pounds of each bolt series?

[@jonasmaita4072]

Чи можете ви отримати доступ до мене з крутним моментом кожної головки двигуна? куди йдуть розподільні вали

[@enriquechaconpinzon8709]

Hola, qué bomba de aceite le colocaste,no tiene ejes balanceadoras.???

[@hardlymovingpro]

¡Me lo imaginé! Obtuvo eso de un motor Kia Forte 10-11 o Hyundai Tucson 2.0 11-13. También necesita obtener la cadena de distribución, el engranaje y las guías. El tensor es el mismo que el 2.4. Los motores de 2.0L o menos no tienen ejes de equilibrio. I figured it out! He got that off of a 10-11 Kia Forte or 11-13 Hyundai Tucson 2.0 engine. You also need to get the timing chain, gear and guides. The tensioner is the same as the 2.4. Engines of 2.0L or less don't have balance shafts.

[@SSss-us6gp]

Братан, что за смазка красного цвета?

[@JayRossTVision]

I am in Louisiana and I have a blown engine like this; I have all of the OEM parts for the rebuild and my mechanic took half of the money up front and didn’t even start the job. Still have all brand new parts in box. Need help please, can anyone send me in right direction?

[@tjayrichards4175]

How much did this cost if you don’t mind me asking

[@aldojosehernandezsalmeron9478]

Hola mándeme el torque bancada y biela

[@coburnsun]

Could someone please give me torque specs on the main bearings & rod bearings & oil pump & thanks in advance

[@dylannewton2550]

Did you ever get those specs

[@teddowglasarguetaespinoza6746]

No das el torque de bancada y viela

[@towi9518]

What type of lube is he using on the bearing anyone know??

[@ramonpaz8566]

Engine assembly lubricant

[@ЖекаПлясун]

Масло насос помоему не такой стоит на этом двигателе

[@InjectorMaster]

Звичайно не такий. Це насос без балансирів. Набагато надійніше.

[@ЖекаПлясун]

@@InjectorMaster це із двух літрового двигуна?

[@InjectorMaster]

@@ЖекаПлясун так

[@ЖекаПлясун]

@@InjectorMaster скільки коштує така переборка двигуна

[@InjectorMaster]

@@ЖекаПлясун 800$

[@АлексейЯковлев-т5у]

Это не G4KJ

[@ОлегВасягин]

Ненавижу этот двигатель

[@HowlingWo1f]

Definitely don’t want to be rebuilding this crap engine.

[@G59Ghost]

this engine is garbage i hate it 😂

[@okeithwhite]

So true