Injora Crawl Master! A new Favorite? KLRs for the 1/24s

[@wingnutbert9685]

You've got me gawking at every building site I drive by now, looking for busted concrete! Thanks alot! LOL! Saw a big pile of perfect sized pieces like yours today, but they were behind a locked municipal yard fence :(

[@fredrieger5226]

What an amazing build, that performance is fantastic! I've been buying Injora products for both my 1/24th and 1/10th scale crawlers for quite a while, impressive products!

[@cradventures5890]

Man I love the look of that build, I might have to get those tires to!

[@xXDaReasonXx]

that truck is an absolute weapon too.

[@WickedRC]

Just ordered a pair, hope they’re worth the hype! I had the Injora 56 rock terrain tires and wasn’t all impressed with them, they lost all grip when they got dirty. So far nothing can beat my hyrax. Can’t wait to put these to the test.

[@2fmrc]

Yeah the hyrax do really well. These are a little bigger and so far have as good of grip as the hyrax so I prefer these honestly. I haven’t ran them on a lot of different surfaces yet to know if they are as versatile as the hyrax but if they are I’ll be replacing all of mine with these.

[@Gibsonlife573]

I hope your would anybody said dude is a beast at driving man and just what he does in general

[@brandonabbott1772]

That body looks good. I just got the new injora 62mm crawler tires but now I'm going to need those

[@TheCandyman024]

Absolutely love this build can you do a video of what you all got done to it and on it

[@2fmrc]

Got ya covered lol kzbin.info/www/bejne/oWjTpZqCnLuggsU

[@andrewrichey7374]

Nice driving, I stand behind the KLR’s Yeah that thing is awesome dude love the rig, they look great with these tires

[@bouncenerd]

Those tire preform like a beast, injora has really stepped up in scx24 upgrades. I mean I have enjoy stuff you know but it’s more of like cost effective stuff you know. With this new stuff it’s game changer quality.

[@2fmrc]

Yeah I’ve been running a lot of their stuff like the brass bits and stuff just to save a little money but these tires are a game changer like you said!

[@andrewrichey7374]

Awesome dude, just placed my order yeah they look just like the KLR’s my go to tire on all of my 1/10 scale‘s, just got The mud terrain from there three sets total got one now waiting on the other two appreciate the info and your videos as always still watching now Just wanted to say

[@2fmrc]

Awesome! Hope you like them as much as I do!

[@lthutchins9473]

"Oooo! I don't know what that was..." Lol! Sounds like my piece of doodoo Atlas almost EVERY TIME I TRY TO RUN IT. I'm either stripping ring/pinion or transmission gears. Sounded like transmission gears to me.

[@Shane_S.]

I wish Injora labeled their tires better, I have a set of Scramblers in front of me that I thought were Crawl Masters because they say Crawl Master on the side wall but realized they are Scramblers when you were comparing them to the actual Crawl Masters!! They're both good tires though!!👍👍

[@2fmrc]

Yeah it’s pretty annoying lol. When these came out there were the 1st crawl masters I believe. Now they have like 5 different tires they call crawl master 🤦🏻‍♂️

[@andrewrichey7374]

Just got mine today, yeah I love them I will order another set they feel really good

[@2fmrc]

Glad you like them!

[@hellofromsoutheastalaskarc7517]

Hello from southeast alaska. Love the truck bro

[@jeffmackovitch9987]

Wowza! Nice looking tires that perform is always good but Damn! you chopped that injora body a lot!

[@2fmrc]

Need that clearance 😆

[@CrawlDaddyRc]

Waiting to test my set out! Great info as usual!

[@jdsrcs8061]

Man Injora is cranking out some killer stuff. Time to order a couple of sets!!!🤘🤘🤘

[@2fmrc]

Yes they are!

[@lgrc6120]

Awesome climbs great shots I'm tyre poor🤣 my 3rd set from little guy arrived today

[@rcpatienceraw9751]

Holy 🚹 haha. Those Tires are rubbing on the body and that rig still climbs like a ninja Warrior 🎎 sweet setup 👊

[@polarbearjf]

Hey Matt! Just wondering if you needed any kjnda special servo mount for that servo. I'm running an enjors mount that fits the emax servo. Will it work with this servo? Cheers and keep up the great work!

[@2fmrc]

It may work. This servo is a little deeper than the Emax. I just cut the back out of a stock mount on mine. Works just fine. The MofoRC best servo mount is the best mount for it though!

[@polarbearjf]

@@2fmrc yep saw the mofo one and was going to chuck it in the cart with an ugly AF chassis. I'm in Australia so was waiting to put an order in to get everything I want!

[@billrichmond918]

I've been looking at that body. I really like the way you cut it.

[@2fmrc]

Thanks! I like it much more than I originally thought I would! I’ve had it since Feb and just now got the chance to paint and mount it up lol

[@rekik66]

Going to pick up a set!

[@shockman8014]

Late but I got a chance to see this video. I have had a set of these day one (ordered with the S10). I ended up preferring the Patagonia on that. I went with the Crawl Master Mud Terrain M/T on the Gladiator. That left these unused until tonight. I put Scramblers on 1" wheels on the fcx24 Power Wagon. That left among stock and dupes these tires and the Fcx24 wheels. I put these on the fcx24 1.3? wheels and put them on the HBX Devastator. They are good tires.

[@rockwolfdesigns6384]

I've got some on the way. Servo wasn't linked

[@2fmrc]

Sorry! Should be now. I’ll double check

[@animalpix13]

What wheel weights are you running? Great vid got them tires commin!

[@2fmrc]

I’ve got some full send weights for the Treal wheels in there. Same ones that fit the stamped steel wheels I think.

[@butterknife_mtb_rc]

That looks like an amazing rig

[@kodyzabelle1030]

gosh u build some bad a$$ riggs i love everything about this one from the wheels tires and the body to what s under the body. keep up the great videos and builds

[@2fmrc]

Really appreciate that! I’m loving this one. It may have just took over the favorite spot lol

[@mattmclaughlin4085]

Ok no more tire video's, as it is now one more package shows up,,,,I got to buy the wife a dinner room table (you know how hard it will be to find one with a pedestal i can craw over)thanks for sharing

[@2fmrc]

😆

[@fcukeround]

I could open up a full service tire shop. I feel your pain lol

[@2fmrc]

@@fcukeround yeah it’s sad how many extra tires I have and I’ve sold and sold tires. One of these days I’m gonna get them all together and spread them out for a pic lol. I probably have 10-12 sets of various tires still in the pack!

[@fcukeround]

I went in my rc room sideways lookin for something and tipped over my 24th tire box. 50 little tires went everywhere! I couldn't deal. So the next day I was finally calmed down enough to pick them all up lmao!

[@mattmclaughlin4085]

@@fcukeround yeah I probably have more rubber in boxes then I got on my DODGE RAM (got 3 new sets on the way)

[@rcplaytime]

they look great 👍 need to get them for mine😀😀👍👍

[@GazooRC]

That rig is awesome! Love it and those tires did great. May have to try them out. 💪🏼

[@acrocurious8023]

I just ordered them. I'm going to try those injora chrome rims they kinda look like rip offs of the rc4wd ones though. What other rims out there are reversible? That free width I just like the option.

[@2fmrc]

Nice! I know there are a few others on amazon that can be flipped. Just gotta look for that bolt on hex!

[@Tacticalmayhem1]

Those tires look sick. Ima get some of those

[@2fmrc]

That’s why I ordered 4 more sets. They gonna be sold out quick lol

[@Tacticalmayhem1]

@@2fmrc Ya lol, have to pick them up quick

[@SINNER_01]

Dude... that little rig is awesome!!! I gotta ask, if you don't mind, what Furitek do you have and how much was the whole set up?

[@edwardlove4300]

I really like the new tires but I have a question for you about how you mounted your servo. It looks like it's just sitting on the plate??? The new truck and tires are amazing.

[@2fmrc]

I just cut a stock mount on this one. It sits a little up off of the mount (basically because of the link mount) but works fine.

[@rcxventures]

Bro that looks clean 🧼 love it

[@adamsherlin7084]

What is the motor and esc setup on that?? Dope build.

[@2fmrc]

Furitek lizard pro and micro Komodo. The perfect combo imo

[@paulus842000]

I'm going to get some of these baby's for my hbx devastator.

[@rab..]

Dang Matt , I wasn't expecting much from the injora tyres but hey , I was wrong ! Wasn't sure about the stripe you painted on the side of the body either but I've gotta say , it's definitely grown on me 👌😀👍

[@2fmrc]

I wish it would grow on me 😆 I’m still just ok with it. Wish I had either did the bottom section with it or just none at all on the sides.

[@wingnutbert9685]

Great ! The tires aren't on the wrong way around when they work better that way! :D

[@CANAMROCKS1]

How’s the compound on the newer injora tires some of the ones I have tried in the past feel like fishing lures lol!! Have you tried the new I rocs that came out close to same time as the Baja pros, looks like they’d be close to same size as these! Love my voodoo’s on my 10th scale, so I know that’s a proven tread pattern on these new injoras!

[@2fmrc]

These have an awesome compound to them. The mud terrains still kinda have that cheap feel to them imo

[@wirelessgnat4208]

How are these compared to the hyrax tires? And my treal beadlocks keep slipping bead any tips to get a tighter bite or prevent this?

[@2fmrc]

I prefer the size of these over the hyrax honestly. Haven’t ran them on as many different surfaces to know if they are as versatile as the hyrax but so far I would take these over my hyrax which I love. As far as the Treal wheels go….. mine slip sometimes on the scramblers especially. Take them apart and wash the bead area of the tire really well. Sometimes that helps. That’s about the only truck I know for them.

[@Gibsonlife573]

I agree with what you said brushless is a guaranteed bust if you're going for the full to me Precision Crawlers

[@kevinklein1806]

when you do the tire test please do an incline test under power as well as static

[@2fmrc]

Yeah I’ll definitely do that. Thinking I may make a concrete incline ramp so it’s not grip tape on a board. I hate using that honestly

[@pgammans89]

Thank you for this review! I was looking for something close to the baja pros to test out. Buying some. Are the amazon links affiliate links? I'd like to support somehow.

[@2fmrc]

Awesome! Glad it maybe helped out a bit. Yes the amazon links are also affiliate links. I really appreciate that!

[@Hoosierdaddyjones812]

I love my furitek micro komodo and lizard

[@scott6074]

Hello, are you running foam in these tires? If you said it in the video I missed it. I just ordered them. Thanks

[@2fmrc]

I always run a foam or Flubberstufferz in them with the tires vented.

[@scott6074]

@@2fmrc thank you I appreciate it

[@grandehombre09]

Nice video! Which mount are you using for the motor? And did you have to flip the transmission tray to allow you to run the motor rearward?

[@2fmrc]

I’m running the Furitek mount and I always mount these little outrunners to the rear so I can mount the battery up front and not worry about hitting the motor lol

[@dirtrider88]

man i really wish that was a 2 inch tire. my 2 inch tires already rub at full flex, luckily not enough to be a problem.

[@andrewrichey7374]

Yeah I saw that, I probably should’ve ordered two sets

[@rockwolfdesigns6384]

That truck is so stinking sweet

[@stanr114]

Wow, what a build! What kind of weight ratio are you running it on?

[@2fmrc]

I’m gonna weigh it now cause to be honest I haven’t even put it on the scales to see if it’s balanced or not lol. I usually have a decent idea what to put on them now to get 60-40 but I’ll check and let ya know.

[@2fmrc]

I just uploaded a short showing the weight distribution on it 🤘

[@mylifted4x4]

Any word on what status of Kinetic is from eBay? He was always a good due to work with so hope all is well.

[@2fmrc]

No I haven’t heard anything. Last time I looked he still had a few items up for sale. Lots of people stole his design so may have ran him off idk

[@mentula3784]

Great vid thanks 👍 reckon I could buy a few pairs if I sell my current stock of 1.0 tires 😂

[@petechipps9770]

Just put a set in my Amazon cart. 👍🏼

[@trentcarter616]

Do you run foam in the tires? If so, what foam and do you modify the foam at all?

[@2fmrc]

Yes I always run a foam of some sort. It varies by tire really. Usually Flubberstufferz in the front and stock foam trimmed a bit (if soft) in the rear. If the stock foams are pretty firm I’ll switch to some crawler innovations in the rear.

[@supergoose5864]

Just ordered a set for my comp build. Did you run any foams inside of these? Doesn't look like they come with foams.

[@2fmrc]

Mine came with foams. Running them just how they came.

[@supergoose5864]

@@2fmrc awesome thank you

[@matthewcason5962]

Honestly though I have the furitek system and it makes the rc crawling a lot more enjoyable cause the brushed always stop go stop go their just not fun to crawl with and the furitek actually crawls and just makes it fun

[@demomicrocrawlerclub]

Thank you so much for the detailed video. Lov this build. May i ask what portal set you use at the rear?

[@2fmrc]

Anytime! Glad it was detailed enough. The rear portal is off a panda 1/24. Needed to have the reverse threaded worm gear. If not the rear axles would turn one direction and the front would turn the other since I’m running straight axle in the front.

[@demomicrocrawlerclub]

@@2fmrc i see thanks. Where did you get the reverse worm gears from?

[@2fmrc]

@@demomicrocrawlerclub they are the standard gears in the panda portals. They output shaft on them is too large to fit the scx24 driveshafts so you have to do some modding to make it all work but once it’s lined out it’s fun lol. I’m loving this rig so I guess it works! 😆

[@GAMMA_AF]

Great video man, I'm excited to try these out. How big are they in comparison to a tire like the lgrp tk's or the scramblers?

[@RandyJ]

The tk are 63, scramblers are 62, and the crawler masters are 58. Those are the sizes from big to small

[@baggettfamily8743]

Are you still running the stock foams in them?

[@2fmrc]

Yep! These and the powerhobby trail warriors are my favorite atm. Both just running the foams they come with.

[@sammyboswelldirtybrc7580]

Man that is beast🔥🔥🔥👍

[@el_guerro4085]

how do they compare to the little guy racing ? size wise ?

[@2fmrc]

Close to the same size. Basically the same size as scramblers. I show them side by side with the LGRP toward the end of the vid somewhere.

[@brandonabbott1772]

So do you prefer these over the hyrax

[@2fmrc]

So far yes. Mostly because they are a bit bigger and I like that. Haven’t ran them on much loose stuff yet but on the rocks I prefer them over everything so far. Scramblers are probably next in line on this big broken concrete.

[@PSYCHO13GARAGE]

Dang man! You made me go and order yet another set of tires. LOL. I would have ordered them anyway. You can never have enough tires.

[@2fmrc]

I’ll have 10 sets of these when they all show up 😆 I’m not getting caught with a new build and these out of stock lol. Probably giving a set or 2 away also.

[@nickshakhnazaryan2925]

How they stack against scramblers

[@2fmrc]

They ran my little test course as good or better than the scramblers I’ve been running. I like the look of them better and the sidewall isn’t jelly either so pretty impressive. I’ve been running basically nothing but scramblers on that course and now I’m probably switching to these honestly

[@trevorthomas6043]

If you hadn’t mention that the tires are directional,I wouldn’t be able to tell

[@kclauser]

I love this build. Just ordered the steering servo from your link, any special considerations to know about ahead of time for getting it mounted? I have the HR emax and moforc servo mounts as well as a 3d printer

[@2fmrc]

I honestly cut a stock mount and it fits. It’s a little raised but it works. I’m pretty sure it’ll work just fine on the MofoRC mount. I have one I’ve been meaning to put on there but no issues so far so I just left it lol

[@dadsrcworkbench1322]

@@2fmrc I have the same servo and the did the same thing with my stock mount. Love AGFRC servos on my scx24 and 1/10 scale rigs.

[@2fmrc]

@@dadsrcworkbench1322 yep! I run these micros as my dig servos in all my 1/10s that have dig.

[@wingnutbert9685]

Would very much appreciate if you could reply back on here, when you get it, as to whether it fit in one or both of your servo mounts and if any cutting was needed. Be very good to know if it does. Thanks very much!

[@2fmrc]

@@wingnutbert9685 yeah I just cut the back out of the stock mount and it mounts up. It’ll be a little raised but works fine.

[@rgjr.6055]

These tires better than Proline Hyrax?

[@2fmrc]

I prefer the size of these over the hyrax honestly. Haven’t ran them on as many different surfaces to know if they are as versatile as the hyrax but so far I would take these over my hyrax which I love.

[@xXDaReasonXx]

its funny how everyone is ending up at double barrels in the rear and more stock length front like i suggested 2 years ago lol

[@cesarerides]

what body mounts do you use, and where do i get one

[@YOOPDLRC]

Perfect 👍😎👍 ~~~!!!!!!!

[@giannetto1000]

Really, better than scramblers?

[@2fmrc]

Man they ran my little test course better. They don’t have that super soft sidewall but gripped really well. Time will tell. But they are really good imo

[@giannetto1000]

@@2fmrc thanks for you review mate, I dig your channel! Cheers from Italy, ciao

[@2fmrc]

@@giannetto1000 Italy? That’s cool! Never been but hope to make it someday. Gotta bring a 1/24 if I do lol

[@290DIRT]

Are those better than the KLR/M 62mm ones?

[@2fmrc]

For me…. 100% yes. Now maybe on loose stuff they wouldn’t be I’m not sure. On my test course with the rock they definitely do better.

[@dacerkeeley9436]

Gotta get you to 10k subscribers hoss. Hang on, I’m gonna hijack my families’ phones. 😂

[@2fmrc]

Love it!!! 😆

[@allisuebaheza2838]

Are the flubbers better than the foams

[@2fmrc]

Usually much better than foams

[@julianhills2000]

how would this body look on a c10 chassis?

[@2fmrc]

Not sure. It’s basically the same exact size as the c10 body so I assume it would fit well.

[@julianhills2000]

@@2fmrclong shot but could you mabye put these tires on a truck with a c10 body? if not completely understand

[@quintonritter9539]

Any build info on this truck? Wondering about the chassis mainly.

[@2fmrc]

It’s shown in my hard park crawlers goblin vid. That’s the chassis it’s running. Not sure if it’ll let me link it here but this is it. Hard Park Crawlers Goblin Xl Chassis for the SCX24! Portal or no portal? Why not both?! kzbin.info/www/bejne/oWjTpZqCnLuggsU

[@fcukeround]

Matt you're costing me more money lol

[@coreymcnally60]

Killer build! Still hoping to see a video detailing those internal shocks with the spring reversed. I'm having a hell of a time dialing in my front suspension and that looked like a solid solution. Thanks for the videos, reviews and updates.

[@2fmrc]

I’m putting it together now so probably tomorrow 🤘

[@coreymcnally60]

@@2fmrc awesome! Looking forward to it.

[@loctuantran]

I find that foam is too firm

[@rcxventures]

I subd as well

[@2fmrc]

Thank you so much!

[@jimbo4203]

Grippy !

[@Gibsonlife573]

Bum lol

[@travistaylor5279]

Hey brother, I'm not sure how often you check but I sent you an email.

[@2fmrc]

I’ll go check!