Injora frame with prefixal gear box build with everest 10 links and ZXYRC Portals

[@RC-ll1rt]

That is a Great looking Chassis , The Feetech 35kg is Strong , Especially if you run it 7.4 volt , Awesome Build !

[@redneckrccrawlers9825]

Thanks I really like the build and can't wait to get it out on the scale park the body I think looks really good on it I will update in a few days on what the noise was in the gear box at full throttle

[@bobbyspenser7304]

Another great video I am really going to have to do some building I like that Everest 10 chassis you made I am thinking about styrene I can build about anything with it so keep the great videos coming an I like your videos because you don't have the music I love hearing the rig so thanks again

[@DirtDobberRC]

If I turn the center gearbox around will that make my rig drive backwards? I have to drill new holes for the front gearbox so I can mount all 4 screws in my front bumper that way the back of the motor doesn’t hit the back of the servo.

[@redneckrccrawlers9825]

No bud you can't flip the gearbox around and the servo hitting the back of the motor will not hurt anything mine has been like that with no issues I wouldn't go drilling into it no need to

[@DirtDobberRC]

@@redneckrccrawlers9825 ok. Thing is I can run it as is but I can only get 1 screw on each side of the bumper. With that being said the bumper moves up and down so that’s clearly not gonna work. I have got to make it where the can isn’t hitting the back of my servo. I just flipped my center transmission lol I guess I’ll have to flip it back round.

[@redneckrccrawlers9825]

@@DirtDobberRC I only have one screw one each side as well but with those tight my bumper don't move like I said I've been running mine for a long while like that with winches hooked up an all with no problems

[@DirtDobberRC]

@@redneckrccrawlers9825 hmmm mine is tight also but i can grab the front and move it up and down. Hell I’ll probably just run the bumper backwards. I’ll most likely drill s few holes and move the tranny forward about 5mm.

[@DirtDobberRC]

I got my axles. I took apart the axles and greased them but I ran into an issue. My tires are rotating towards each other front and back 😊

[@redneckrccrawlers9825]

Your drive shafts are hooked up wrong give me a few and I will take a pic of mine and show you how they go

[@redneckrccrawlers9825]

The gearbox drive shaft and the front drive shaft sounds like it needs flipped around to me

[@DirtDobberRC]

@@redneckrccrawlers9825 the number of shafts you have on your gearbox in the center of you crawler is different than mine looks like you have more. On mine I have 2 shafts side my side and on the other side I have 2 shafts one on one side on one on the end there isn’t one in the middle except for the two that’s next to each other.

[@DirtDobberRC]

@@redneckrccrawlers9825 bro this thing is so quiet I can barley hear it running. I don’t like the bumper mounted servo thing though. When I run over a rock the front tires turn without me turning them it’s very sloopy.

[@redneckrccrawlers9825]

@Webb4RC you need a pan hard link it keeps the chassis from moving when trying to turn

[@DirtDobberRC]

Great video, I’m waiting on mine to be delivered it’s been 10 days 😡. Any way those rear shock towers doesn’t have any body post holes. How do I mount the body on the rear do I gotta buy a new set of shock towers for the rear?

[@redneckrccrawlers9825]

Yes you will need a set of body mounts or make your own that's what I did with the old side posts from an Everest 10

[@DirtDobberRC]

Do you use magnets? To hold the body on? I have the jeep wrangler tube body by Injora and I’m gonna use magnets. I just hope I can get the bumper of the jeep to set on the chassis and have no gaps.

[@redneckrccrawlers9825]

@@DirtDobberRC no I have body posts that stick up thru my body I am running a Chevy square body on mine

[@DirtDobberRC]

Cool beans. I can’t wait to get mine finished. To be honest I spent enough money on mine to have bought a very very nice one.

[@redneckrccrawlers9825]

@@DirtDobberRC I love the Injora chassis with prefixal gearbox I did have to shave the end of my motor shaft it was a hair to long on both axial 27t motor and my 2n1 hobbywing fusion se

[@bobbyspenser7304]

Need you a new pickup truck body an just cut out for the shock mounts to go thu that would look good to my friend but great Job

[@DirtDobberRC]

I have a hobbywing fusion se and I can’t get my servo to fit On the bumper the motor has the esc on the can. How can I fix that so you know?

[@redneckrccrawlers9825]

I took my bumper an servo mount if you look there is two screws on each side move it up and only use the front screw hole it allows just enough room to get it in there that's how I did mine I'm at work but will do a quick video to show you when I get home if you need to see exactly what I am talking about

[@redneckrccrawlers9825]

Also you will love the hobbywing fusion it's very smooth and has nice control

[@DirtDobberRC]

That’s exactly what I done. I am running into another issue. My prefixal drive shaft is hard to turn when I loosen the screws on top and bottom that hold the motor on it turns easy only when they are tight is when the shaft is very hard to turn I have to use pliers. I didn’t turn it but about half mm just to see. My motor shaft isn’t bent. Did you have that issue?

[@DirtDobberRC]

I don’t wanna send this kit back but I paid $100 bucks for this damn thing. To be honest this kit is worth about 30 bucks! I might send it back anyway and just go with a LCG transmission. But I’m curious if you ran into that problem. If I can fix it I’ll keep it. Also there should be 4 screw holes instead of one on top and one on the bottom.

[@redneckrccrawlers9825]

@@DirtDobberRC yes the hobbywing fusion will work like I said you need to move your front bumper mount up and I forgot to mention you have to shave down the motor shaft just a hair to get the motor to go all the way in to where you can get the top and bottom screws in and I love this setup other than those two issues I have had no other problems and I am still running it today as my class one truck and it works very well

[@DirtDobberRC]

Ok I got it. Screws that holds on the motor are thread locked! Now I hope I got the gears in the right direction and no backwards shit.

[@redneckrccrawlers9825]

Your good you can't put the motor planetary gears in backwards your going to love the crawl ability of the motor and with the front mounting gearbox it opens up a lot more possibilities for scale body's with interior I'm glad I could help you out I know my build videos suck I'm not good at explaining stuff but I do what I can lol

[@DirtDobberRC]

@@redneckrccrawlers9825 I just noticed something that might be an issue. I can twist the bumper with the servo on it. There is only one screw on each side but I can still move the bumper up and down.

[@DirtDobberRC]

@@redneckrccrawlers9825 dude you do a great job making videos! You can’t read people’s minds bub. You’re very good at explaining things and answering people’s questions quickly even on an old video!

[@redneckrccrawlers9825]

@@DirtDobberRC thanks that means a lot

[@DirtDobberRC]

@@redneckrccrawlers9825 yes sir! Keep doing what your doing you help a lot of people and also give people ideas 👍🏻

[@DirtDobberRC]

The rear tires are turning forward in forward motion the front tires are turning in reverse

[@redneckrccrawlers9825]

It won't let me post a pic but both my front and rear driveshafts are hooked straight across from one another and the driveshaft coming from the gearbox should be on one with nothing across from it

[@DirtDobberRC]

@@redneckrccrawlers9825 do you have instagram

[@DirtDobberRC]

@@redneckrccrawlers9825 I even looked at the pictures of the chassis planetary gearbox kit and I have it hooked up the same way as the picture shows.

[@DirtDobberRC]

@@redneckrccrawlers9825 I fixed it. I had to turn my gearbox around. Kinda makes me feel a bit stupid lol.

[@redneckrccrawlers9825]

@@DirtDobberRC oh ok ur talking about the transfer case the gearbox is what the motor is attached to

[@Djkommode]

Interesting

[@redneckrccrawlers9825]

Lol yes it is

[@donaldhenke2750]

what axles?

[@redneckrccrawlers9825]

These are zxyrc aluminum portal axles from Amazon

[@keldonator]

​@@redneckrccrawlers9825Would you buy them again? This chassis too for that matter, buy again?

[@dans_rodsnkustoms]

Noise is the planetary gears with no grease

[@redneckrccrawlers9825]

Nope it was the motor shaft was just a hair to long and put the motor on a bind when I put the two screws in made it hard to turn to

[@redneckrccrawlers9825]

If u go thru my vids I mentioned it after I did a test run

[@almondroadfunnys8982]

I like let me tell you what