Innova & Imperia RTA wicking tips & tricks (VWM Innova & Imperia)

[@JartoKuhira]

For anyone getting leaks even after following Ryan’s instructions: I’d just like to point out that what he mentions at 9:07 and 10:20, “bring this side down against the wall”, is a crucial step. I realized that I was spreading my cotton out too much, to the point that some of it stuck outside the edges of the walls. That made it too fluffed out so it wasn’t able to absorb all of the liquid, which ended up flooding the deck. It is really important to bunch the cotton up nicely within the insides of the walls so that it can soak up all of the juice. I should’ve paid more attention! Also, I use just a little more cotton than Ryan does by not cutting the wicks quite as flush against the exterior of the walls as he does - that works well for me in RDL even when I chain vape. Thanks a lot for your help Ryan!

[@RebuildableRyan]

Yes you have to make sure there is no gaps in the wall in front of the juice port. Any gaps at the bottom, top, or sides will allow juice to freely flow into the deck. Thanks for watching!

[@JartoKuhira]

@@RebuildableRyanAbsolutely

[@kouvelassotiriros]

Thank you for your presentation about wicking. What is the wicking difference for innova MTL vape ?

[@ΓιώργοςΓκουντής-λ3ζ]

It depends what do you mean mtl...for tight mtl 1.0mm hole you must put your cotton inside the U channel

[@RebuildableRyan]

Under 1.5 you need to use more cotton

[@kouvelassotiriros]

@@RebuildableRyan thanks

[@ΓιώργοςΓκουντής-λ3ζ]

@@kouvelassotiriros αν παίζεις στο 1.5 μπορείς να βάλεις ελάχιστα το βαμβάκι στο αυλάκι...για πιο σφικτά βάζεις περισσότερο βαμβάκι μέσα στο λούκι

[@kouvelassotiriros]

@@ΓιώργοςΓκουντής-λ3ζ ευχαριστώ πολύ!

[@BultrasPlovdiv]

Is it honestly that much better than Enigma? I love the draw of my Enigma and the flavour is bomb

[@jamesm217]

The coil definitely matters but by far the wicking is the most important part to get optimal flavor.

[@6eck]

May I have the size of the O-ring of the Imperia Air Disk? The juice keeps leaking underneath and it's whistling

[@marsh5185]

Thank you for helping

[@ΓιώργοςΓκουντής-λ3ζ]

Which model is your fiskars? thanks

[@RebuildableRyan]

Unfortunately the model I currently have I don’t recommend.. the old ones I used to use I couldn’t find at my local store anymore. The only way to figure out the model I do recommend would be by finding a video or stream I showed them in. I’m sorry

[@geralddorrian100]

Appreciate it

[@QuinnEtherington-y9m]

Do the enigma to.

[@jerry4ims]

If you’re doing the video anyway, you could’ve at least placed the coils on the deck, instead of explaining the coils in the deck

[@RebuildableRyan]

maybe you can make a video doing it that way

[@jerry4ims]

No thanks I’m a kayfun man

[@BassCommunion]

You don't have to bitch about it, even beginners in rtas can drop a simple coil, also kayfuns are dead for many years now, zero flavor, bad deck, etc they're left in 2015