Epic build where did you get water cooling kit from ?
@mannereyescruz-ke4ld Жыл бұрын
Nice job
@Typhon8882 жыл бұрын
How is that Byaski block? Think I’m going with that over the $150 EK one.
@hamzaEditing233 жыл бұрын
crazy dude
@ZeeForceGaming3 жыл бұрын
Thanks mate
@opurity13504 жыл бұрын
Super Talented MashAllah 😍😍🥰💫
@ZeeForceGaming4 жыл бұрын
Thank you so much 🥰
@deezreviews3 жыл бұрын
Dope vid love it
@ZeeForceGaming3 жыл бұрын
Thank you so much mate :)
@shahabalamawan71984 жыл бұрын
Amazing work boy🌚.... well done 👍👍..
@ZeeForceGaming4 жыл бұрын
Thanks
@reglegates85254 жыл бұрын
sweet gaming rig!
@InSaiyan-Shinobi2 жыл бұрын
Just a question for your flow meter does the water have to be flowing from right to left or left to right ?
@kageyoshi22454 жыл бұрын
helios water cooled omg!
@bennyblanco1173 жыл бұрын
my flow meter only said alarm and i did turn the rotor to intake still said alarm i connected to psu 4pin molex need help pls thnx
@ZeeForceGaming3 жыл бұрын
You might have connected it wrong. You have to open the nut on left side of the unit to make this side intake or exit… failing to do so will result in the error you’re seeing. It’s mentioned on user manual
@bennyblanco1173 жыл бұрын
@@ZeeForceGaming i did switch to intake do you think i have to connected to cpu fan on mobo or i got faulty flow meter?
@ZeeForceGaming3 жыл бұрын
I've connected my RGB CPU waterblock with CPU fan header. But it's not necessary. Alarm only means that either the flow is not proper or the sensor is not detecting correct liquid flow. If you're 100% sure it's neither the case, then you might have to change the flow meter
@bennyblanco1173 жыл бұрын
@@ZeeForceGaming yeah i see mine sometime read sometime dont i might just have to return it thank you tho
@mohammaddawoodamjadali7304 жыл бұрын
Surely your CPU got jacked Loved to see your dedication and Passion ❤️❤️❤️ May Allah Bless you with all success and blessing🤲🤲🤲
@ZeeForceGaming4 жыл бұрын
Thank you so much 💞
@bionicshah3 жыл бұрын
Hey, may I know where did you get these parts from, I have the same case and would like to get the same kit. Thanks in advance
@ZeeForceGaming3 жыл бұрын
Sure why not... I got almost all the stuff from Bykski, they sponsored it... A couple of things from Barrow Mod Store on AliExpress... Both brands have stores on AliExpress and are very cooperative. You can purchase from there...
@bionicshah3 жыл бұрын
@@ZeeForceGaming Thanks for replying bro. I'm afraid its gonna cost alot to get it delivered here from Aliexpress :( a friend bought a $30 monitor arm but ended up paying 24K rupees. im sure you know how custom charges too much for stuff like this
@ZeeForceGaming2 жыл бұрын
Ask the seller to declare low price and mention "lab equipment" on the package. I did not pay anything
@khmergodhobbies3 жыл бұрын
does the pump heatsink interfere with the radiator fans for front?
@danielsavini47383 жыл бұрын
How did you set up the biksky flowmeter? Mine is keep saying Alarm...:(
@ZeeForceGaming3 жыл бұрын
You might have installed it the wrong way. There's an input/output valve inside the flowmeter you need to take care of before installing. Otherwise it will say "Alarm"
@Ahmmunition4 жыл бұрын
MA looks neat
@ZeeForceGaming4 жыл бұрын
Thanks :)
@dronetheworld4k673 жыл бұрын
you have to remove all back mounted SSDs to get this res installed ?!? no way around that ???....
@rinaldomacnamara42744 жыл бұрын
wish I had a Rig like that
@khmergodhobbies3 жыл бұрын
hey zeeforce, is the pump blocking space for additional fans for front?
@ZeeForceGaming3 жыл бұрын
Yes, The pump blocks lower 2 fans on the inside. Push pull config isn't possible with that pump unfortunately, but the three fans on the front of my case are ideal for good airflow.
@khmergodhobbies3 жыл бұрын
@@ZeeForceGaming thanks for reply
@khmergodhobbies3 жыл бұрын
@@ZeeForceGaming last question. you have to remove the cable cover to install the distroplate, correct?
@ZeeForceGaming3 жыл бұрын
Yupp! Cable cover was removed, and you'll have to hide cables on the back of the case!
@asimcent4 жыл бұрын
where did you get water cooling kit frome?
@ZeeForceGaming4 жыл бұрын
I actually imported it, because these are not commercially available in Pakistan
@tonydixon93104 жыл бұрын
wow that water cooled heat haha
@heidimuster2954 жыл бұрын
3 grand machine wow!
@zacharyfregoe11344 жыл бұрын
this PC is just too sweet to watch!
@locork123 жыл бұрын
How much liquid are you using to fill up the system ?
@ZeeForceGaming3 жыл бұрын
It's about a 450 ml in the whole loop. Used half bottle of EK Cryofuel
@locork123 жыл бұрын
@@ZeeForceGaming nice 👍🏼 thanks I have another question Which brand you recommend ?
@ZeeForceGaming3 жыл бұрын
Brand? For coolant? If you're asking about coolant then I would only recommend the following three. EK Cryofuel Mayhems Pastel Primochill Vue If you have cooling components made of copper and aluminum in the same loop then only use Cryofuel by EK. None else
@locork123 жыл бұрын
@@ZeeForceGaming yes coolant Thank you 🙏🏼
@ZeeForceGaming3 жыл бұрын
Pleasure I could help. 😊
@sayredemaio59474 жыл бұрын
you did a great job assembling that!
@loiseantoine35764 жыл бұрын
insane strix awesomeness!
@saif-ullahnazir75424 жыл бұрын
BHAI AP MEDICAL KI FIELD MEIN KARNY KIA AYE THY 😳
@ZeeForceGaming4 жыл бұрын
😂😂Galti se aa gya
@michaelasoto47904 жыл бұрын
you are fast! hahaha
@tonykachoka21943 жыл бұрын
Wow
@ZeeForceGaming3 жыл бұрын
Thanks 👍
@bodysoul72254 жыл бұрын
it almost assembles itself lol
@asjadnaeem30982 жыл бұрын
Hhhh aa tiger wtf farik air flower hy bhai
@saadkhalid82664 жыл бұрын
👌👌👍
@kappaboi44833 жыл бұрын
I came here to look at the case and now I want to point out that this looks pretty bad not gonna lie, its really average at best. Almost none of the tubing is straight. The bends itself are horrendous, theyre almost folding in its barely cylindrical anymore. The pen markings on the tubes. And did you mount a 360 rad on top of 420 fans at the front? Also just one random fan to pull? There just doesnt seem to be any sort of planning, like you had 3000$, bought a bunch of stuff and was like alright im gonna work around everything. Like a 1300w PSU to run a 9600k and a rx580? This probably only pulls like 300watts from the wall. Theres honestly nothing insane about this build, the only thing insane about this build is the money, if anything you completely wasted your money. Should've started smaller and learn from that then continue to upgrade your watercooling. This is also way too much just for a 9600K, not even the GPU. Overall, very poorly and unrefined built PC. I give this a 2 out of 10.
@ZeeForceGaming3 жыл бұрын
Not looking for approval dear random guy from internet.
@zainulabdin72254 жыл бұрын
Ara bahi urdu ma video dala karo
@ZeeForceGaming4 жыл бұрын
Urdu me dekhta nai hy koi Pakistan se... Views he nahi aty 😔