INSANE 5" FPV Drone Racing Build

[@LehtusBphree2flyFPV]

House music will never judge you and neither will I!!!! 💯💯🎈❤️❤️❤️

[@JonE5FPV]

damn, that taping the elrx rx to the back of the 90 nano cam is such a nice tip. Cant believe i never thought of it. Nice one!

[@jboxfpv3303]

Glad I could help!

[@dinosabic5383]

Love that you put your RX on the back of the camera. I'm going to start doing the same thing I thing. Super clean and saves space!

[@CustomFPV]

super clean. wish i could build my quads in 5 minutes and 53 seconds like you. king 👑 !!

[@_taunic]

Fantastic flying, cool drone setup

[@wrekdco]

What a great build!

[@jboxfpv3303]

Thanks!

[@beckobeck123]

woah mounting the receiver behind the camera is so smart. great video!

[@adrianarobles5916]

Wow how cool !

[@paulmillard1130]

I do like this video there no cruising for time it just gets on with it well done.

[@bretonwoodford8294]

Great video, Clean build, Smooth flying!! 👏💪🔥🔥

[@jboxfpv3303]

Thanks brother!!

[@n3n3_FPV]

Nice and clean build! Can you share me the stl files por de nano 90 camera? Thank you!!

[@jboxfpv3303]

If you go to FPVSupply, and locate the camera mount, it’ll be on that page and it’ll bring you to printables.com

[@theicecheetah2401]

Nice build video man! I'll have to give some of these tips a try on my builds.

[@nzmfpv]

Clean quad clean dvr 🔥

[@waterclockerfpv]

Very nice! My builds are very similar. I have not needed to ground to the frame if I leave tape off the power section of the VTX.

[@AbdullahAlbuti-z2r]

very good

[@fpv-geek]

Very nice and clean build 👌🏻

[@flyawayfpv]

Master of clean!! Nice video man

[@NeonFPV]

Nice vid, build, and flying!! 🥳

[@nappyfpv]

Nice clean build man ❤

[@MacksDad]

Clean build homie Need to come fly with us in OK soon

[@jboxfpv3303]

I’ll try to make it out, just super busy with school rn

[@winder6]

Sick thanks for sharing

[@lixxfpv]

Clean one👀

[@nine5sixrc119]

Yo this is 🔥🔥 man!!

[@jboxfpv3303]

Thanks dad!! The video looks waaaay nicer but it hasn’t processed the 4K yet😂

[@homerogonzalez2909]

grounding the video transmitter huh thats interesting! could we get more info on that please

[@jboxfpv3303]

Basically with the Whoop Lite from HDzero you’ll get noise. Not typical break up but whenever you arm your quad you’ll notice an excess amount of noise. People way before I switched to HDZero figured out if you ground the vtx to the frame it all goes away. So now when I use my whoop lite I always ground the vtx to the frame on top of the fc ground wire (still have a ground wire to the fc)

[@mety_twister431]

Heyy, also build with the switchback and supernova 1980kv motors, a few seconds into the flight and my esc failed. Is it because the karate tune? Can you reccomend some PID values or something? I didnt find any useful guide exactly for racing builds, Thanks🔥

[@jboxfpv3303]

I would honestly think it could have been a bad esc, but what are your esc settings? That would affect the esc’s performance as well. Can’t do that exact build because I don’t have those parts haha

[@mety_twister431]

Esc settings same as in the video, pwm 48, demag off, timing 27, i honestly think itwas a bad esc, but some guys told me its because karate is aggresive tune amd the motors are “too powerul”.

[@mety_twister431]

Also i was using foxeer predator 45a, i heard its enough if your not pushing it, which i am not, anyways it failed on a calm flight, while doing a slow roll. Ordered the 60a so ill try to lower the PIDs and hope it doesnt blow up😅

[@nitro-rc6241]

@@mety_twister431any updates?

[@bluecrx90]

Perfect 👍 how much weight?

[@jboxfpv3303]

254.3 Grams with props!

[@MrCrowleyandhisdrone]

Nice build🙂

[@JedaNgajar1455]

Good konten

[@hapsti]

wasnt expecting rally phonk on an fpv video lol

[@geordil]

i gotta try demag off. You ever get any desyncs running open class like that?

[@jboxfpv3303]

Depends, sometimes yes but if you ever do try to run Demag on Low or try to lower your ramp up

[@geordil]

@@jboxfpv3303 for sure. I usually run the default demag low and decrease ramp up to 25%

[@jboxfpv3303]

@@geordil that’s interesting I normally only ever run dmag off, if it desynces then I lower ramp up to around 25-30%

[@geordil]

@@jboxfpv3303 makes sense! I'll definitely try with demag off and see if I can notice the difference you're talking about.

[@irom77]

what battery would you recommend ?

[@jboxfpv3303]

@@irom77 Tattu RLine or Quad gas! If you use my link or code on wrekd you’ll save 10% on both over there! Hope it helps!

[@irom77]

But it’s 6S right ?

[@jboxfpv3303]

@@irom77 yes 6s I run 1400mah batterys so on wrekd either 1380 or 1400mah works

[@geordil]

nice video!

[@GalileoUAS]

Sic!

[@irom77]

which UART is VTX on this FC ?

[@jboxfpv3303]

Which ever the Fc plug is, not 100% sure

[@tomatefpv6886]

Nice

[@DanZfpv]

Nice and toight.

[@irom77]

And what props ?

[@jboxfpv3303]

Gemfan MCK V3’s!

[@hi_desert_rat]

..as a whistle.

[@screecherfpv9913]

First