This New 184016 RC Buggy is INSANE! especially on 3S. In this video i installed my own 45A brushless ESC to replace the faulty 35A one and sent it full throttle down the road on two different 2s lipos and then a 3S, Enjoy! 👍 WLtoys 184016 👉bit.ly/3EabED7 Using Code DAVID for a further $15 discount on RRP
@seanjis0072 жыл бұрын
Well done... Part 2 👍 🔥🔥🔥 Fastest production XKS/WLTOYS to date!!! Backpack speed runner or a backpack basher
@PERTHWESTOZRC2 жыл бұрын
Cheers for watching mate 👍 and have a good weekend
@ElDiabl01872 жыл бұрын
Fast little car
@PERTHWESTOZRC2 жыл бұрын
Sure is hey David. Cheers for watching bro 👍
@RDsRCReviews2 жыл бұрын
Good grief is this car fast! 95kph is insane on 3s! I'm so glad you were able to swap in a new ESC and test this one again. If this car was just a bit cheaper it would be perfect. Awesome job Dave!
@PERTHWESTOZRC2 жыл бұрын
Thanks Ryan it sure is quick, just under 60mph out the box, and yep hopefully the price drops a bit during the Black Friday sales
@chadcooper63642 жыл бұрын
That was quick man well done
@PERTHWESTOZRC2 жыл бұрын
Cheers brother 💯🍻👍
@gdhall53112 жыл бұрын
This time it ran a lot better, very nice job Dave. Have a great weekend.
@stigonutube2 жыл бұрын
yes bit much for what it is 1/18 scale..would be interesting to know what you think of 144010 vs this one? did you say coolrc esc 45amps? any benefits of going surpass hobby esc? hope your doing aok over in W.A, raining like crazy over here east coast nsw.
@kode44202 жыл бұрын
Seems to be running better. I might go with one of the 45amp esc because mine has almost no brakes. :) I sent mine full speed into a curb on accident last night. Only a turnbuckle popped apart. I expected a lot more damage.
@ThompsonRc2 жыл бұрын
Great runs have they started putting more grease in the diffs I like the surpass hobby motors but I have had bad luck with there esc's
@PERTHWESTOZRC2 жыл бұрын
Cheers bro, i haven't opened up the diffs yet but i think there wouldn't be much grease 😄
@ThompsonRc2 жыл бұрын
@@PERTHWESTOZRC 😄
@Van_City2 жыл бұрын
That’s some great speed on 3s 😮👍💯
@PERTHWESTOZRC2 жыл бұрын
Sure is, she was flying alone, just about hit the 60mph 🍻
@azcheron Жыл бұрын
How do I keep this car on the ground?! My 184016 with 3S is a wheelie MONSTER
@matred35382 жыл бұрын
That thing is definitely a "little ripper"! Always enjoy your videos. Nice one mate. Take care. ☺
@PERTHWESTOZRC2 жыл бұрын
Thanks Mat, have a good weekend bro👍
@RCOverKill2 жыл бұрын
Nice runs brother!! That's crazy, it's really stable for a 1/18th scale. Since everyone uses the WLtoys cars for speed runs they should start including contact foams, or offer a roller with foams included, that would be cool They could beef up the suspension, and drive train on rollers, and the cost of electronics QC issues issues could be put towards making it a better speedrunner. WLtoys clone an Arrma limitless with all the aerodynamics so we can use the new Delta plastics body, and all the upgraded parts made for the limitless. If you could sell it for @300.00 there would be no reason to buy the limitless.
@PERTHWESTOZRC2 жыл бұрын
Thanks James, she's a little rocket 🚀 have a good weekend brother
2 жыл бұрын
Thanks video
@PERTHWESTOZRC2 жыл бұрын
thanks for watching and have a good weekend
@bradsrcsmore38482 жыл бұрын
Nice run! Pretty sweet speed pretty much stock Bro!!
@PERTHWESTOZRC2 жыл бұрын
Yeah, i only had to change the esc because the original was faulty but all stock otherwise. Cheers Brad🍻
@j.c.proctor2 жыл бұрын
Nice 🔥 👍🏽 💯 💪🏾
@philiprccars43402 жыл бұрын
Hi Dave, if you do a side by side comparison of the A959 and the 184016, what would you say are the most obvious upgrades they did except the metal chassis, wheels and the brushless setup?
@PERTHWESTOZRC2 жыл бұрын
Besides that they are both the same scale, and the body style is similar as the a959, they are totally different cars all together, this 184016 is basically a mini 144010 brushless
@philiprccars43402 жыл бұрын
@@PERTHWESTOZRC Hi Dave, thank you for the reply, what I am trying to determine is what is different suspension and chassis-wise to make this little beast so much more controllable in a straight line compared to the A-959, and if it is at all possible to rebuild an A-959 to be like the 184016? Oh well, perhaps one must just appreciate each car in its own right and not try to change it into something that it is not ...
@sTuPiDiScOoL_2 жыл бұрын
Very impressive for wltoys man think it might be worth grabbing one and upgrading ESC and correct foams these will fly! Quick one Dave what size connectors on these stock motors bro? Is it 3.5 or 4mm mate going upgrade ESC and grab a decent fan for the motor keep it cool on speed passes 🙏💚👊
@PERTHWESTOZRC2 жыл бұрын
Sorry for late reply Jordan, yeah the bullet connectors on the 2845 are the typical size to the esc which is like 3.5mm like you said pretty sure mate 👍
@sTuPiDiScOoL_2 жыл бұрын
@@PERTHWESTOZRC cheers bro and no problem mate fully apreciaite your busy mate thankyou man look forward to next one mate 🙏💚👊
@Van_City2 жыл бұрын
🤯 💥
@natalotto20062 жыл бұрын
Mine had absolutely zero oil in the shocks as in bone dry not even residue, easy fix. Probably one of my favourites now 🙂
@PERTHWESTOZRC2 жыл бұрын
Yeah there wasn't much oil in the rears on my one at all, thanks for watching Daniel👍
@AdmrbleCrichts9 ай бұрын
Hi mate nice review. I just bought this car and noticed an issue with the ESC. I think it's 'cogging' at takeoff with low throttle input and doesn't reverse on first press of the trigger (takes a couple of times). And thottle response is generally poor. Are these the same issues you faced with the 35A ESC? Brakes on mine work fine though.
@PERTHWESTOZRC9 ай бұрын
Mine had an issue of going at full throttle at first then just slowing right down to basically nothing in a limp mode, it was obviously a faulty esc so i swapped it out for another one i had. Just buy a new 45A or 60A ESC and you should have no more issues.
@AdmrbleCrichts9 ай бұрын
Thanks mate just saw the first video actually where you had the ESC problem. Thanks for the reply! @@PERTHWESTOZRC
@camrowdrone64972 жыл бұрын
😀Nice speed
@PERTHWESTOZRC2 жыл бұрын
Yep Cam its very quick for such a little car
@robertredzich72922 жыл бұрын
Zoooooom
@noneyobuisness8789 Жыл бұрын
Wow
@BangForYourBuckRc2 жыл бұрын
I agree on the price aspect of this car Dave, it’s a bit high! Aside from that though, 95km/h! Wow! That’s freakin amazing! I know, with 3s but Wow! Wonder if the stock esc would of done that? I’m betting not, as WLtoys usually run hot! I’m curious though. Awesome re-test bud! How many amps is that esc you were using?
@PERTHWESTOZRC2 жыл бұрын
Hey Robby, it’s just a 45A esc, it’s the actual one I took out of the 16889 during our challenge we had a couple months back
@orbitaljellyfish808 Жыл бұрын
Oil thickness doesn’t seem to matter with these shocks; still quite bouncy
@draganblastovicz74872 жыл бұрын
Why are these tests always speed runs? Seems to me that the way a car handles corners and goes around a track is more relevant than top speed.. or am I missing something?
@PERTHWESTOZRC2 жыл бұрын
I will be testing it off road soon like I mentioned in this video, I just wanted to see how fast it is first since I had to replace the standard yet faulty esc. I guess most KZbin channels are doing speed runs also because that’s what a lot of people want to see?
@VictorianAerialVision2 жыл бұрын
Holy hell, that's bloody fast for such a little car. Do you think the standard 35A ESC would handle 3S? Thanks for sharing mate, awesome job. 🦘😎👍
@PERTHWESTOZRC2 жыл бұрын
Hey mate thanks for watching, yep it’s very quick for such a small 1/18 scale buggy, as far as the 35A esc I think some others had a bit of luck with it and others had issues so I wouldn’t recommend it really. Seemed like they made this car just to use the standard 1500mah 2S lipo as there is hardly any room there for larger lipos anyways.
@doubledome20762 жыл бұрын
Thank you for this video!! I saw this car advertised on someone else's channel, & it was the best- no problems, blah blah- if I would've gotten one, I would've had the same problem you did ( just my luck ) and would be very mad right about now. Appreciate the honest review!! 👍👍🦾🦾
@PERTHWESTOZRC2 жыл бұрын
Thanks for watching mate, and yep there are some channels out there that will rave on how a product is so good in every video just to make sales off their viewers, that's why its impotant to watch a few reviews first before making a decision to purchase or not 👍