Insta360 ONE RS 1-Inch 360: Best Low Light Settings (Tests and Tips)

Рет қаралды 4,404

Constantine S Photography

Күн бұрын

Пікірлер

@DFD1 10 ай бұрын

Thanks for checking all these low light scenarios. Manual mode and higher shutter speeds really do a decent job 👌

@ConstantineSPhotography 10 ай бұрын

I'm glad you find it helpful. I learned from a terrible experience😅😅

@matthewsachaullymce279 9 ай бұрын

thanks for the tips, those are very useful .. 🙏🏻😃

@ConstantineSPhotography 9 ай бұрын

Thanks for supporting 😊

@matthewsachaullymce279 9 ай бұрын

@@ConstantineSPhotography your welcome… greet from Indonesia 🙏🏻😃, this is while using X3, now upgraded to One Inch 360: kzbin.info/www/bejne/jaqol4OgaMeaeKMfeature=shared

@michelepallaver 10 ай бұрын

Thanks, it's very useful

@ConstantineSPhotography 10 ай бұрын

You are welcome, I'm very glad to hear that!

@lifeflytours3604 Жыл бұрын

Muchas gracias por tu video voy a ponerlo a prueba

@ConstantineSPhotography Жыл бұрын

Thanks for supporting!

@alexgoriatchenkov 2 жыл бұрын

Hello and thank you for Great low light results you achieve. I have same cam and doing some manual settings when have a chance. You can tryout even 24 fps to reduce ISO. Thank you for uploading. Waiting for more.

@ConstantineSPhotography 2 жыл бұрын

Thank you for sharing! Will upload more!

@TheHawaiianc Жыл бұрын

The shutter is digital so the issue is the stabilization digital also I’m thinking there fighting each other and causing the jitter soo because the shutter digital light doesn’t really change because there not really blocking the light mechanical shutters do this because the delay of light entering the camera to the sensor.. basically you want shutter over fps or it will have that rolling shutter like 6k30fp you kinda want over 1/60 professionally they say double like 1/120 but thats design for mechanical shutter knowing how it works.

@walkingaroundshanghai 2 жыл бұрын

There's no focusing problem, that jitter causes the motion blur, the lens on this camera is hyperfocal hence it has everything in focus starting from some certain distance. I've been using this camera a lot recently and in my opinion the best results you can get with ISO up to 800 and shutter speed 1/100(which is still barely enough and jitter still appears from time to time, so need to walk quite slow ). You can check my latest video on the channels, first and last parts of it was shot with those settings. Also I use Topaz Video Enhance AI for denoising and upscaling the footage to 8k. P.S. 6k 30p has less resolution than 6k 24/25 are the best options to get the maximum quality possible from this camera.

@ConstantineSPhotography Жыл бұрын

Thanks for sharing! I agree that iso 800 and 1/100 looks great, will try your tip about frame rate!

@makeev888 Жыл бұрын

Hello, it's better to shoot 24/25 frames per second, did I understand correctly? Please tell me, did you have a memory card error on this camera if it was removed incorrectly, maybe from a computer or connected to a poppy through an adapter? I've already had this 3 or 4 times, it's very annoying ... although the memory cards are of good speed and the volume is 128 GB, extreme

@walkingaroundshanghai Жыл бұрын

@@makeev888 so basically with 30p you get a smoother overall look, which I believe preferable for this kins of videos, but for the most resolution you'd need to stick to less smooth 24/25p depends in which region you're located. I'm currently in China - which is PAL, which is 25/50/100p etc. And I choose quality over smoothness. Speaking of SD card error - I had it once to, when I disconnected camera without safely ejecting the card first, so yeah, better to do that. I never actually bother to pull out the SD card from a camera - just plug a USB C cable straight to it and copy the footages.