Install Android Multimedia Peugeot 207, Octa-Core, 7 inch Screen, 4 Gb RAM

[@AdrianDragan]

➢ Links: - Peugeot 207 Android, 7 inch, Octa Core, 4 Gb RAM (recomended): s.click.aliexpress.com/e/_Dmr9jtN - Peugeot 207 Android, 7 inch, Quad Core, 2 Gb RAM: s.click.aliexpress.com/e/_DdUp5jZ - Peugeot 207 Android, 9 inch, Quad Core, Octa Core, 1, 2, 4, 6, 8 Gb RAM (not tested): s.click.aliexpress.com/e/_DkCswcn - Frame for Multifunction Screen: s.click.aliexpress.com/e/_Dd9NzYb - canbus decoder Raise PSA-RZ-01: s.click.aliexpress.com/e/_DmM5VvH - Peugeot Rear View Camera FishEye HD 720p, 1080p, CVBS, AHD: s.click.aliexpress.com/e/_DesD9kL - Peugeot Rear View Camera: s.click.aliexpress.com/e/_DmiOdU3 - Car Trim Removal Tools: s.click.aliexpress.com/e/_DBuyF2X - Torx T20 Screwdriver: s.click.aliexpress.com/e/_DkW9B5V - Electric Screwdriver Rechargeable 4.2v: s.click.aliexpress.com/e/_DkWh3OX

[@kevinwaag9976]

I love this one!! it show everything i want including keep the original screen to keep the error codes but it even shows that we keep them with this android device! the other ones didn't! Too bad it's 430€ ....

[@AdrianDragan]

What android version is your unit (10, 11, 12, 13)?

[@unidentifieduser6251]

Неделю назад установил себе такую же магнитолу. Во внешнем микрофоне нет необходимости - достаточно и встроенного, собеседник слышит хорошо. В месте установки экрана есть ниши с обеих сторон, в которые идеально помещается GPS антенна и её не нужно выводить из-под обшивки наружу. На качество приёма сигнала спутников это не влияет. Из негатива: - магнитола работает только с включенным зажиганием (в отличии от оригинальной); - приём радио сильно хуже, т.к. магнитола не даёт питание на усилитель активной антенны (в отличии от оригинальной); - если не подключить экран ремней безопасности, будет светиться ошибка подушек безопасности. Я так же докупал крепление под старый экран, как и Вы, но использовал его иначе: сделал в нём отверстия под экран ремней безопасности, вместо экрана компьютера, и добавил разъём под USB и AUX (вот такой: aliexpress.ru/item/32800706097.html?spm=a2g39.orderlist.0.0.2e1d4aa64l673j&_ga=2.41456034.1895888028.1626901737-2036409899.1626781826&item_id=32800706097&sku_id=64212748419 ), лишнее пространство заполнил пластиком из 3D ручки. Затем выровнял поверхность шпатлёвкой, зашкурил и покрасил с баллончика.

[@gldxh4ck3r]

Great video Adrian, and thank you for the english instructions! 😉 For a few years i've been wanting to buy one of these for my 207, but all Peugeot/Citroen cars built in the last 20 years are equipped with that annoying Energy Economy Mode that enables after 30 minutes listening to the radio with the engine off, and then you have to start your engine and keep it running for several minutes just to give you another 30 minutes of electronics.😠 What's the point of having a juiced up Multimedia unit if you can't enjoy it for more than 30 minutes, especially when you have to wait for an hour or more in your car, which is quite common to happen. 😔 Anyway, my question is, for Adrian or anybody else who has this unit in their Peugeot/Citroen, does the Energy Economy Mode still cut your electronics after 30 minutes with this new Android Multimedia unit installed in the car?

[@AdrianDragan]

Hello. Android units are not affected by Economy Mode, it works until the battery is discharged 🙂

[@gldxh4ck3r]

@@AdrianDragan Thank you so much for your quick reply, that's exactly what I needed to know, and I'm so happy it will "kill" the Economy Mode! I will definitely buy this fully equipped unit. 😀 By the way, I just subscribed and still haven't seen your other videos, but judging from the red sowings on the inside of the steering wheel, this looks like a 207 GT, RC or even Rally. If it's your car, congratulations, it's a beauty! Also, you sound like you're from Romenia, because some of the words are familiar to me. Greetings from Portugal! 😉

[@AdrianDragan]

Thank you for the appreciations. This 207 is not mine, it's a friend's and it's ordinary equipment. You're right, I'm from Romania. I recently visited Lisbon, a great city with great food and an amazing history!

[@gldxh4ck3r]

@@AdrianDragan I was fooled by the red sowing on the steering wheel, usually comes standard in those versions (mine is the Sport version), so maybe it's a customized sowing. Never been to Romania, but I've already seen some photos an videos and it's on my bucketlist to visit in the future. 😉 I agree with you, Lisbon is awesome, I've been there a few times, but I live in the portuguese Madeira island, which is also worth to visit. 🙂 Thank you once again. 😊

[@WesleyBish]

Hi Adrian, Thanks for the clear video. I bought the decoder you mentioned, because the steering wheel control didn't work. So installed the new decoder and I wanted to change the settings in the factory settings like you did but I don't have this option in the menu. Do you have any advise how to move forward?

[@AdrianDragan]

Hello. Did you solve the problem? If not, send me a message with pictures from the Factory menu to the address: pgt.adrian @ gmail.com

[@sabrinagiulini5160]

thanks Adrian for your help...you are great!!!!!🔝🔝🔝

[@Hellofa6ird]

Thanks for this, only a couple of questions what did you do with the seatbelt screen? did you leave it disconnected? did you get errors or did you have to go and make changes in settings?

[@AdrianDragan]

Hi. Even if you do not see that screen leave it connected and put it in the dashboard, if you do not connect it you will have an airbag error because the car computer will not detect it.

[@Hellofa6ird]

@@AdrianDragan Many thanks 🙂

[@miosz2368]

Adrian could you send some new video of this radio? How it works after 9 months? Also I have question what have you done wirh seat belt indicator ? 🙂

[@AdrianDragan]

Hello. I can't make a new video about this unit because the car is not mine, but the owner says it works very well after 9 months. Leave the display with the belts attached to its socket in the dashboard, otherwise you may receive an airbag or belt error because it no longer sees that display. P.S. I will soon do an installation tutorial and review about a new navigation with 9 inch screen :)

[@JensHove]

Very well done video! Thanks.

[@AdrianDragan]

Thank you too!

[@Anekis_old]

Omg this tutorial is just what i needed tnx a lot!!! Just to be sure... if i want to have android auto i need to buy the carplay edition or the other one has it as well?

[@AdrianDragan]

Hi. You need to buy the carplay edition.

[@tatyro8005]

bv,Adrian ..esti super

[@AdrianDragan]

Multumesc!

[@minimagic75]

Great Video Adrian! Do you know is there any way to set the time and enter the vehicle settings menus using the steering stalk when this is all fitted?

[@AdrianDragan]

Hello. This function must be configured using Diagbox Peugeot diagnosis.

[@valerchik1984]

Чи коректно працює штатний монітор той що під магнітолою , і чи можна його взагалі викінути

[@richardnelson3096]

Hi what’s the cover called for the computer you fitted below the unit as am having a nightmare i fitted mine but I never plugged the computer back in and now the boot won’t open and my deadlock and alarm keep flashing

[@AdrianDragan]

Hi. This is Frame for Multifunction Screen: s.click.aliexpress.com/e/_9uu6bK

[@Anekis_old]

What was the problem here? Your shouldnt really need the old screen. I suppose it was a blown fuse?

[@nicoleklassen4888]

Hi, will the screen still show the functions like tire pressure or information about the oil?

[@SpareCake]

What about the seatbelt indicator screen? Or does the Android unit show if a seatbelt is not being worn?

[@AdrianDragan]

Hi. The seat belt indicator screen remains behind the Android screen, you must leave it connected. The Android screen doesn't show warnings that you don't have your seat belt on.

[@ichbinnichtdu8614]

Great Video, Adrian! But how about DAB+ support by this unit? DAB+ is not supported in my country after 2024 therefor I'm looking for a new board computer. Does this unit support DAB+ without additional devices needed (e.g. smart phone, DAB+ Adapters, ...)? thank you

[@AdrianDragan]

Hello. DAB / DAB+ adapter required for Android unit, like this: s.click.aliexpress.com/e/_DdqlhID By default Android units do not know DAB Radio.

[@heddahemmingsen5836]

Hi Andrian. I finally got this system installed on my daughters 2008 - 207cc (but the unit is android 11) and got some questions. Took me some time to get the Raiser canbus to work correctly, only thing not working is when I press the tip button on the wiper only the org screen shows consumption - it does not show on the android screen (then I need to click on the app). But I have 2 other problems, 1) when powering down - the android unit shuts of ofcourse - but it also forgets the time and reverts to china time... why is this? seems the unit dont get power to keep the time correct? 2) do you know of a better camera fit? I bought the linked camera and problem is that 50% is blocked by the booth lip.. the camera is partly behind the metall. this camera replaces the licenseplate light, but the camera should have been a little bit lower.. anyway - biggest issue is 1)... having to set the time every time you enter the car.

[@AdrianDragan]

Hello. 1. I think that the power wires are not connected correctly in the plug that connects to the power cable, probably the + ACC wire is inverted with the + 12v wire. 2. The camera ... Maybe you need have a narrower camera as a field of view. I don't know how it looks on the screen. Can you attach a picture somewhere and leave me a link here? What version of Raise canbus do you use?

[@christianmarthinsson7906]

raise is the same version as in your links. but I just ordered the ..65 version to test it but takes many weeks befare i get it. Also the backup sensors seem to be offline, only got camera. I will check the connector and move the pin. Guess I need a new tool for that..

[@AdrianDragan]

@@christianmarthinsson7906 To display the original parking sensors you need a canbus from SimpleSoft, see next link and choose the color version "For PEUGEOT 408" www.aliexpress.com/item/1005001797868789.html?aff_fcid=5731ba82250e456baab1c8ad77813822-1621863229023-05637-_AbS079&aff_fsk=_AbS079&aff_platform=shareComponent-detail&sk=_AbS079&aff_trace_key=5731ba82250e456baab1c8ad77813822-1621863229023-05637-_AbS079&terminal_id=a4886d1a72584241b5df38394da27292&tmLog=new_Detail

[@christianmarthinsson7906]

checked the pins in the car. 1 give 12v when ignition is off - its blue. on the android connector side it is green and goes the canbus (raiser 01) connector. ie the raiser gets continues 12v when ignition is off

[@heddahemmingsen5836]

@@AdrianDragan so then org parking sensors will work simultaneous with the camera? and all the other functions? excellent. - bytheway I think I might have figured out the clock issue. Might been only my settings.

[@patrickspitse1080]

adrian wich type of cd player are you installing in this video? brand? type? with the navi button and usb? thx!

[@AdrianDragan]

Hi. This type: - Peugeot 207 Android, 7 inch, Octa Core, 4 Gb RAM (recomended): s.click.aliexpress.com/e/_9gETmM It has USB, GPS Navigation, bluetooth handsfree, KZbin, etc.

[@xxflippistarxx]

Hi Adrian, I bought the 9 inch and it was more or less easy to setup, but I am facing some difficulties you might be able to answer. 1. The decoder I got was the P/N:G-RZ-PSA65 (RAISE) and I have a peugeot 208. When I try to add the canbus/decoder under the settings no matter what I choose it says I have to update the MCU upgrade package? What does that mean? Would of course love to have the steering wheel functions for music and such. 2. I should be able to attach my android auto via bluetooth cable, but it doesn't immediately recognise it and I don't know how to set this up? 3. for the original orange screen with motor information and such, after I removed the old radio (we do not want a CD/radio, but a compartment) it is just blinking waiting for us to set date, time and such which I don't know how to?

[@AdrianDragan]

Hello. 1. Some Android units need to download their settings online for each type of Canbus, this means that your Android tablet must be connected to the Internet. So make sure you have an Internet connection (WiFi via Hotspot or Internet SIM card) when you make the settings. 2. You probably need to open an application. I don't know which application it is, but you could ask the seller you bought it from how Android Auto works. 3. But do you have a Peugeot 207 or 208?

[@xxflippistarxx]

@@AdrianDragan Hi again and thank you for answering. 1. Sorry I miswrote, I have a peugeot 207 from 2008. I will try and do the setup again while being online. 2. I have written to them for a guidance with the Android Auto, but still waiting for answer which might take a while as it is golden week atm. 3. I have a 207, but if we need to keep a radio in with the buttons (just saw another video) then so be it :) 4. a new question, you say in your video that there is an easy hole in the glove compartment to draw the USB wires, but I can't seem to find any? Can you elaborate or link to a picture/video? Thanks again

[@AdrianDragan]

@@xxflippistarxx 3. If you use or if you already have canbus box PSA-RZ-01 then you will definitely be able to control the original screen. 4. Check next to the lamp in the glove box if there is a hole, if there is not, you can make one.

[@redhabenzeghiba4260]

does the car computer keep working and give the data of the car ? i have the new generation of 207 oem screen it gives the information about the car if theres and issue and can activate the automatique lights and wipers

[@AdrianDragan]

Hello. With this Android unit you have access to all the functions of the car: kzbin.info/www/bejne/ionbn4Sop9V_irc

[@scottheathcote2961]

Hi , I've clicked on the link that is recommended and there seems to be four types to choose from.. two versions of mxk8227 and a px6 without carplay and px6 with carplay...which one of these is the one recommended ? .. thanks

[@AdrianDragan]

Hello. PX6 with Carplay it is the best.

[@scottheathcote2961]

Thank u 👍

[@danielcorredor2574]

Hi Adrian, great video, i bougth the radio form the link on the description (recommended), but it don´t have the "control settings" app, so I can´t control the car´s computer, do you have any idea can I do?

[@AdrianDragan]

Hi. It depends on the canbus decoder you have now connected to the Android unit, not all decoders are compatible with the car screen. I tested and it works PSA-RZ-01, see in my video: kzbin.info/www/bejne/ionbn4Sop9V_irc Canbus decoder PSA-RZ-01: www.aliexpress.com/item/1005003021372267.html?aff_fcid=51639f6d512e4151b6a847aa7c5c79c7-1641560343782-03587-_9gOmyi&tt=CPS_NORMAL&aff_fsk=_9gOmyi&aff_platform=shareComponent-detail&sk=_9gOmyi&aff_trace_key=51639f6d512e4151b6a847aa7c5c79c7-1641560343782-03587-_9gOmyi&terminal_id=a4886d1a72584241b5df38394da27292

[@JoaoPedroSobral]

I have installed their new unit with android 12 (octa core 4gb ram 64ssd). It only has the head unit and does not have the radio part. Works very good. Only problem I notice is the airbag signal that pops when I connect the car. The workaround was to keep the small airbag/seatbelt display connected (hiden behind the dashboard. Did you encounter the same problem?

[@AdrianDragan]

Hi. I had the same problem, the solution was to leave connected that small display with the lights for the airbag and seat belts behind the Android screen.

[@JoaoPedroSobral]

@@AdrianDragan exactly what I did. The simplesoft canbus box works ok but has you mentioned (and I bought it) the raise psa-rz-01 does everything. However I have a problem which is that the canbus settings (when using the Raise) disappeared/are removed when I stop the car. Meaning everytime I start the car I need to go to factory settings - canbus settings and choose the options super annoying!! The pin for this unit is 3368

[@nunoferraz]

I also bought a Android 12 PX5 octacore 4+64GB for a Peugeot 207 CC. I had to change the Canbus protocol and after several attempts I found one that made the steering wheel buttons work, the board computer screen works and the open door alert works (but only for about 1 second, even if the door stays open and I can't find any option to keep the alert image while the door is open... I only get the image again when the door is closed). I am getting no warning when the boot is open or when the hood is opening/closing. Does the Raise PSA-RZ01 solve these problems?

[@AdrianDragan]

@@nunoferraz Hello. in my car PSA-RZ-01 works well with the alerts.

[@nunoferraz]

@@AdrianDragan all alerts? Keeps open door alert until you close the door? Th PSA-RZ-01 is pluged in the same same as the Simple soft that came with the radio? Or do I need to buy a new wire loom? What about reverse camera? I am getting black screen when reverse is engaged...

[@JoaoPedroSobral]

Do you have by default parking sensor? Will it work once this unit is installed?

[@AdrianDragan]

Hello. The model tested in this video is compatible with the car's original parking sensors.

[@JoaoPedroSobral]

Thank you Andrian. Last question I am assuming their late units (equal but with android 12) will work the same. Do they support wireless carplay? Thanks

[@cookbookforcannibals]

do the controls for enabling or disabling parking sensors still work with this in place?

[@AdrianDragan]

Hello. I don't know how to answer your question because the car on which I installed the Android unit does not have parking sensors from the factory.

[@JPauloRouxinol]

Hello. I need your help to Config a similar radio in a Peugeot 307cc with NavTeq. Just CarSettings are not good.

[@AdrianDragan]

Hello. Try in Canbus Settings with other Peugeot models: 307, 308/408, 207...

[@JPauloRouxinol]

@@AdrianDragan What CanBus you are using? I don't see that option!!!

[@AdrianDragan]

I use Raise PSA-RZ-01.

[@pingu6618]

hey, great video! i’m looking at getting one of these myself, however i have a few questions. 1. how is car play? is it smooth and responsive? 2. is it possible to get a control panel in the centre console to control the screen? it seems like quite a reach to click the screen from the driving seat! great video once again:)

[@AdrianDragan]

Hello. I haven't tried Carplay on this unit, but it should work like clockwork on Octa Core processor units. The panel for controlling the original screen of the car will only work with canbus PSA-RZ-01: s.click.aliexpress.com/e/_DF4mKbt

[@pauldeitch5821]

Is the new screen closer to the driver? I find the existing display too far away to reach and touch.

[@AdrianDragan]

Hello. It's not too far but it's not the most convenient to use either. The versions with a 9 inch screen brings the diaply closer and is more accessible, soon I will make a tutorial about it: s.click.aliexpress.com/e/_DdUZp8h

[@pauldeitch5821]

@@AdrianDragan Cool. I'm interested. :)

[@guardioorlando7863]

Hi Adrian, your suggestion for canbus is working well on my Peugeot 207 new headunit. But it didn't connect to the c-monitor. Do you face the same thing? Please reply thanks!

[@AdrianDragan]

Hello. Are you using Canbus decoder PSA-RZ-01? What settings do you have in the canbus menu (car, model)?

[@AdrianDragan]

Hello. Are you using Canbus decoder PSA-RZ-01? What settings do you have in the canbus menu (car, model)?

[@AdrianDragan]

Hello. Are you using Canbus decoder PSA-RZ-01? What settings do you have in the canbus menu (car, model)?

[@guardioorlando7863]

Hi yes, I'm using canbus PSA-RZ-01. The menu is car, model, year and type. I selecting Peugeot, 207, 2009-2014, All

[@AdrianDragan]

Try by selecting Peugeot 307 or Old 308.

[@miosz2368]

Hi Adrian, I have changed my old canbus decoder to new one as you said PSA-RZ-01 and I have lost my Bluetooth option in head unit. Any ideas how to fix this????

[@AdrianDragan]

Hello. I have not encountered this problem so far that the Bluetooth application disappears when you connect another Canbus module. I think a general reset of the Android drive could bring the Bluetooth application back.

[@miosz2368]

@@AdrianDragan thanks for help, after few reset and reboots it works 👍😁😎

[@rodrigopisciolari8046]

Would you mind extracting/sharing the MCU file you currently have? My head unit is just like yours (same hardware) but can´t find the right MCU file and it´s almost bricked now.

[@AdrianDragan]

Hello. This car is not mine and I no longer have access to it. Unfortunately, I have nowhere to give you the MCU file. Try to find help on the XDA forum: xdaforums.com/c/head-units.3833/

[@ericdecolsales3066]

Hey man, excelent video, exactly what i was needing. I have one curiosity, what language are you speaking? I tought it was russian, but i was understanding a lot of entire phrases, then i tought it was italian because i was understanding too much, is this Romanian?

[@AdrianDragan]

Hi. It is this Romanian :)

[@stefanconka6784]

Hi Adrian, I have noticed you have outside temperature displayed on your android screen. Mine doesn't show the temperature. How did you manage to show it on the screen? Thank you.

[@AdrianDragan]

Hello. The display of the outside temperature depends on the type of Android unit and the canbus decoder model. You may have to activate this option, I think it would be through the Factory Settings menu.

[@stefanconka6784]

@@AdrianDragan I got PX6 unit you recomended and raizen canbus,but temperature doesn't show up

[@subbashop6233]

Hey Adrian. Can i see the parc Distanz Control Visual if i buy the can Discripter? And can i see the convirtible top if open or close visuell in Theorie Screen? Peugeot 207 CC

[@AdrianDragan]

Hello. The model in the link is compatible and will display the parking sensors. I don't know if it will show the convirtible top if open or close. What type of original screen does your car have? Large color navigation or regular monochrome screen?

[@rualcard]

Hi Adrian , does this have the Apple CarPlay functionality? What happens if I Connect my iphone vía USB to the car?

[@AdrianDragan]

Hi. You can use CarPlay through an adapter connected to USB: s.click.aliexpress.com/e/_Ddyidjp

[@rosuaq]

Hello, I just bought the 207 model but in the cc version (cabrio). Will messages regarding the roof be displayed when switching to Android? For example, that the roof closing was completed correctly. The original radio showed messages about the roof, but I want to change it to a touch screen radio because I wanted to install a reversing camera.

[@rosuaq]

I hope you can understand what I mean 😂

[@AdrianDragan]

Hello. I don't know if it will show these messages about closing the roof, but you can easily keep the original screen, then you will definitely see those messages on the original screen. See in my video: kzbin.info/www/bejne/ionbn4Sop9V_ircsi=Joynci8xmOf-meRL&t=841

[@mikkelgundersen7015]

Hi, mine just says 0 in all of the consumption. Any fix to that? Also nothing displays when I press the end of the wiper, I have to go in manually

[@AdrianDragan]

Hello. Do the controls on the steering wheel work?

[@mikkelgundersen7015]

@@AdrianDragan my model is without Sterling Wheel controls. But it Can see when i put the car in reverse, and the radio buttons lights up when I turn on the lights

[@guardioorlando7863]

Hi Adrian, I see that the canbus decoder link that you share only mention for 307. Is it also working with the 207 or you share the wrong link? Same thing with the rear camera. Please reply 🙏🏻

[@AdrianDragan]

Hello. Canbus Raise PSA-RZ-01 also works on Peugeot 207: s.click.aliexpress.com/e/_DdKjasN

[@guardioorlando7863]

Thanks already order it, I'll update you soon 👍🏻

[@drf16788]

great video, seems very straight forward,do you connectanythingto the fuse box in car and how much all in will it cost?

[@AdrianDragan]

Hello. The radio is plug and play. I bought it here, you can also see the price: s.click.aliexpress.com/e/_DmYwe8n

[@franciscobarroso9076]

Hi Adrian, Great video. I whant to buy one of these for my Peugeot 207, year 2007, my question is, the Android recomended, come with all cables and adapters or do I have to purchase the part. Thank you for your help.

[@AdrianDragan]

Hello. Yes, in the package you get everything you need for the Android unit to work well on your car. If you want to keep the original on-board computer screen, you have to buy adapter frames and possibly a new canbus adapter. See the links in the clip description.

[@franciscobarroso9076]

@@AdrianDragan Hi Adrian, thanks for the quick response. I already ordered. I wait impatiently for delivery.

[@robertmazetti8629]

Hi Adrian, Will seat belt indicator work with this radio? /Robert

[@AdrianDragan]

Hello. I installed this Android navigation on a friend's car, but I don't know if it shows the message for the seat belt or not.

[@aykuttaskin78]

I will ask you about in delivery, are there 1 pice androit and 1 piece like radio?because i dont have the original radio?im really waiting for your response. Thanks for super video?

[@AdrianDragan]

For this model you receive in the box the screen, the radio unit + all the necessary cables and the canbus decoder, see at the beginning of my video kzbin.info/www/bejne/ionbn4Sop9V_irc

[@robertmazetti8629]

Hi Adrian, Do you know if there are any sleep time settings i can change for a faster boot-up? /Robert

[@AdrianDragan]

Hi. It should be these conditions in Factory Settings, if I'm not mistaken.

[@Gergo1321]

Thank you for this installation. I have a 207 SW Peugeout and I am planning to buy this multimedia android system. Does the part assist work for you? Because I changed the original radio and the part assist doesn't work. I am interested to know, is it still working in your car with this android system? Thanks.

[@AdrianDragan]

Hello. This model is compatible with factory parking sensors.

[@fd.c2309]

Great video ! Can you give me the link for this product please ? 👌🏾

[@AdrianDragan]

Hi, - Peugeot 207 Android, 7 inch, Octa Core, 4 Gb RAM (recomended): s.click.aliexpress.com/e/_9gETmM - Peugeot 207 Android, 7 inch, Quad Core, 2 Gb RAM: s.click.aliexpress.com/e/_AmeXqy

[@Subliminal3117]

Hi. Would this fit a 206+? Not the 206, but 206+.

[@AdrianDragan]

Hello. I don't know if it works on 206+. Probably only if it has the same dashboard.

[@Subliminal3117]

@@AdrianDragan it does, Im more concerned about the connectors etc.

[@PakoSt]

That's a great video! Thanks for making such comprehensive guide and integrating the english subs! When it comes down to the reverse camera links, would it possible to mention their model name? The links in the description will eventually become outdated for one reason or another.

[@AdrianDragan]

Hello. I will try to update the links periodically. Thanks!

[@PakoSt]

Thank you, @@AdrianDragan . Having the item name would be enough. Updating the links constantly isn't really needed nor expected imo

[@jacqueslescallier]

hi, nice video. Can you explain to me how to make the streering wheel command work? in mine, impossible of program each button thanks

[@AdrianDragan]

You don't need to program each button, you need to choose the right canbus protocol. See in my video at 23:16

[@wayneman6199]

Hi! I add myself to the congratulations for such an excellent video guide. I would like to know if this item is compatible with carplay for IOS or just for android. Thanks a lot in advance.

[@AdrianDragan]

Hello. You can have Android Auto also wireless CarPlay using a module connected to the Android car multimedia device: s.click.aliexpress.com/e/_DkcPFBd

[@wayneman6199]

@@AdrianDragan thank you so much for the quick response! I am in love with this multimedia system idea, but I am a little worried about its endurance over time. My 207 has 11 years already and not a single issue with audio system... How it is working nowadays your friends system? It just has few more time than a year (based on the upload date of the tutorial), not much time in order to determine endurance over time (ie. from 5 to 10 years) but... You know, this is what worries me the most as the invest for every functionality I intend to install goes to ~600€, not a joke. Please take your time to share your thoughts. Thanks a lot in advance!

[@godfreygiliana9899]

Where did yu put the screen that shows the safety belts?or it shows on the radio?

[@AdrianDragan]

Hello. That screen remained connected inside the dashboard. The Android screen does not show data about connecting the seat belts.

[@straightsvge0076]

Hey i havent really watched de video in detail but what about iOS compatability?

[@AdrianDragan]

Hello. I have not tested the compatibility with Iphone phones, but I suspect that it should work without problems with the bluetooth function.

[@Joseph-nc7gw]

Thanks for the video, I have a question, what about the seat belt display? Airbag error? Does it also work with 2 Din radio, over the climate control?

[@AdrianDragan]

Hello. Leave the airbag display connected even if it remains in the dashboard, otherwise you will receive an airbag error. Yes, you can install a 2 DIN Android unit instead of the old radio.

[@Joseph-nc7gw]

Can you recommend 1 Din Radio 7"? Do you have a link for me?

[@AdrianDragan]

@@Joseph-nc7gw Maybe something like this: s.click.aliexpress.com/e/_EwG5cNt

[@AdrianDragan]

@@Joseph-nc7gw And cable + canbus decoder: s.click.aliexpress.com/e/_EuFJMNv

[@AdrianDragan]

@@Joseph-nc7gw Another great option is a dedicated Peugeot 2din navigation, but this is expensive: Just found this amazing item on AliExpress: a.aliexpress.com/_EIK13c7

[@josueborges556]

Top man

[@carlocolli9046]

Ciao Adrian come faccio ad entrare nel menu del vecchio computer di bordo e modificare i parametri della macchina?

[@AdrianDragan]

Hello. See in my video: kzbin.info/www/bejne/ionbn4Sop9V_irc

[@bahasamman]

Hello Adrian is there screen like this for our 308 in same place like this

[@AdrianDragan]

Hello. For this car model I did not find an Android radio that could be installed on the dashboard instead of the multifunctional screen.

[@franciscobarroso9076]

Hi Adrian, the android, 7 inch, octa core, you recomended also comes with the DVD? 😀or do I have to buy it separately? Thanks for your help.

[@AdrianDragan]

Hello. That drive helps you control with less effort

[@k-lose4105]

Hello Adrian , I plan to install it in my Peugeot 207 but I have my doubts since, I am in the country of Mexico, do you think that is a problem?

[@AdrianDragan]

Hello. I don't know what problems you might have, don't work to the car's safety systems.

[@ugurhoruz6708]

Where did you install the buzzer?

[@AdrianDragan]

Hello. Behind the Android unit.

[@GiuseppeDelVescovo]

I would like to buy also parking sensor (rear and front) for my peugeot 207 who work with this radio. Can u send me pls a lik where to buy it?

[@AdrianDragan]

I've seen some parking sensors that I think would work with the Androis unit when the reversing camera is displayed, but I haven't tested: s.click.aliexpress.com/e/_AYhHiN

[@GiuseppeDelVescovo]

Thank you very much!!!

[@GiuseppeDelVescovo]

@@AdrianDragan did u test?

[@gitezmayonez]

Great video. What about seat belts informations? Is it possible to see them on Android Screen?

[@AdrianDragan]

Hello. A warning message is displayed on the Android screen when you are driving and you do not have a seat belt connected. This is available for this Octa Core tested version.

[@GiuseppeDelVescovo]

@@AdrianDragan i can not see it in my radio. It depends also from the type of Canbus?

[@MohamedAbbou-kf9xw]

Très belle vidéo bien expliqué de plus c est la première fois que je vois qu on peut récupérer l ancien afficheur top👍. Ou peut on commander le kit complet ?

[@MohamedAbbou-kf9xw]

Hez Ali express il le propose a 6€ par contre le réglage de l ancien afficheur j ai pas compris comment il le règle ?

[@AdrianDragan]

Hello. L'unité multimédia Android est livrée avec un décodeur canbus pour les commandes au volant, mais ce décodeur canbus ne sait pas comment créer les boutons virtuels pour l'écran d'origine. Vous avez donc besoin d'un autre décodeur Canbus capable de créer ces boutons virtuels afin que vous puissiez ajuster l'écran d'origine. Voir les liens ci-dessous : ➢ Liens des unités Android : - Peugeot 207 Android, 7 inch, Octa Core, 4 Gb RAM (recomended): s.click.aliexpress.com/e/_9gETmM - Peugeot 207 Android, 7 inch, Quad Core, 2 Gb RAM: s.click.aliexpress.com/e/_AmeXqy - Peugeot 207 Android, 9 inch, Quad Core, Octa Core, 1, 2, 4 Gb RAM (not tested): s.click.aliexpress.com/e/_Dl7PIln ➢ Lien décodeur Canbus compatible avec l'écran d'origine : - canbus decoder Raise PSA-RZ-01: s.click.aliexpress.com/e/_DDVfziD

[@MohamedAbbou-kf9xw]

Merci et le bloc pour intégrer l afficheur d origine je peux avoir le lien merci.

[@MohamedAbbou-kf9xw]

Peut être juste en le branchant ?

[@sabrinagiulini5160]

Ciao, ho montato la radio, funziona tutto ma rimane accesa, la luce nel cruscotto dell'airbag e nn ho più le informazioni del computer di bordo, mi sapresti dire perchè per favore??? Non ho collegato però il vecchio frontalino come hai fatto tu sotto la radio...potrebbe essere per questo? Grazie per la risposta...

[@AdrianDragan]

Ciao. Collega il vecchio pannello che ha le lampadine dell'airbag e della cintura di sicurezza, l'errore dell'airbag scomparirà. Per poter controllare lo schermo, è necessario disporre di un decoder canbus PSA-RZ-01 e deve essere impostato correttamente nel menu Canbus. Vedi nel mio video al minuto 15:00

[@sabrinagiulini5160]

@@AdrianDragan ti ringrazio, se avrò qualche problema potrò ricontattarti per favore?

[@sabrinagiulini5160]

Cambusa comprato, speriamo di riuscire a fare tutto bene, adesso il prima possibile monto monitorino originale con frame, come consigliato da te!!!😁

[@ukenduuk]

Hi! So, the Allure version has the factory installed navigation without the system matrix screen. I guess I need to buy that matrix screen also? And is this the only extra unit I need to buy? Or is it at all possible to do this with the built-in navigation screen which also functions the same like the matrix screen in other versions. Or maybe there is another Android system which handles this all in one (without extra matrix screen needed) maybe? Thanks for answering. :)

[@AdrianDragan]

Hi. You can also install this Android navigation without putting that matrix screen that was on the dashboard.

[@GiuseppeDelVescovo]

Guys, is a couple of month that my screen after few kilometers i drive the car ( and the engine is heat) start to flickering and I can not see anyhing anymore. I need to way the day after(once the engine is cold) to see again the screen. Does someone has the same problem? What can it ne pls?

[@mehdux]

reduce the screen brightness if this do nothing check your battery maybe this old and can produce enough power for the system

[@mehdux]

or maybe your particle filter is too dirty so when u drive the car has not enough power for ur autoradio thats why ur engine heat and ur screen blackout

[@apmount]

Hello, is this compatible with peugeot 207 hatchback that is from 2006? Because I find many android screens that are for year 2007 models and above.

[@AdrianDragan]

Hello. If it is Peugeot 207 even since 2006 it is compatible. Not all sellers know that the Peugeot 207 has been manufactured since 2006.

[@aminvettel5]

Hi adrian Tell me what setting should i do on the canbus raise PSA-RZ-01 to have all the functions on the original multifonction screen. I already have the canbus raise psa rz 01 i also have peugeot 207 as on the video Tanks.

[@AdrianDragan]

Hi. See in my video at minutes 24:14

[@aminvettel5]

@@AdrianDragan ok i saw but what type of vehicle shoult you choose ? Select car type

[@aminvettel5]

@@AdrianDragan you must select the type of vehicle (50petgeot&3008&301&2008&308 (raise) ?

[@AdrianDragan]

You can try every Peugeot model available for Raise. Theoretically it should work 307 or 308.

[@aminvettel5]

@@AdrianDragan ok I´ll try I would aslo like to know if with this settings on the android screen there is the display of open door messages , risk of ice , low fuel level , automatic door lock active etc.

[@clod262]

is this autoradio compatible with a peugeot 207 - 2006?

[@AdrianDragan]

Hi. Yes, it is compatible with your car.

[@Ayresy_83]

Great video, can u tell me if it’s ok to fit if the car hasn’t got a camera? Also is there an option to fit a camera for it ? Cheers 👍🏻

[@AdrianDragan]

Hello. You can install the Android unit even if you do not have a rear view camera. You can also install the rear view camera, you can be guided by my tutorial for Peugeot 308: kzbin.info/www/bejne/raLFeWupaph7Y9U

[@Ayresy_83]

@@AdrianDragan so the 308 camera install is also the same for the 207 ? Do u have a link to buy the camera pls cheers 👍🏻

[@AdrianDragan]

It is the same way on 207. Check the links in my clip with camera install tutorial.

[@Ayresy_83]

@@AdrianDragan sorry just watching it now and got the link for it, I have a 207cc so I take it, it’s the same, I have a right hand drive as I’m in the uk so I obviously reverse the process and remove the left hand back light unit. Sorry for all the questions and thanks a lot 👌🏻

[@adisorucu]

@@Ayresy_83 hi. did you try this screen for the 207cc version? I would like to know how it performs when the sun shines directly on it. I am also thinking of buying it for my 207. thanks for you reply

[@garikaicndidzano3648]

Could you please send the link where l can get the set

[@AdrianDragan]

Hi. Look here: - 7 inch screen: s.click.aliexpress.com/e/_DDtr8aV - 9 inch screen: s.click.aliexpress.com/e/_DFxxBsd

[@ldetonimacedo]

Nice job!! I have a question, does it work with 207cc? 😬 It's look like a little bit different

[@AdrianDragan]

Hello. I think it works. What seems to be different?

[@adisorucu]

did you try it on the 207cc? I am curious how it performs with the sun shining on it. thanks for the reply!

[@cookbookforcannibals]

@@adisorucu I've just installed the px6 (android 11) version on my 207cc. Same process but i'm trying to find somewhere to feed through the usb and gps wires. If you can't see the canbus selection menu, go into 'car' settings then 'factory settings' it will ask for a password, this will be 126 and you'll then be able to change canbus and logo settings etc

[@nunoferraz]

@@cookbookforcannibals Which canbus protocol did you choose for your 207cc? I have tried many until I found one that had the trip computer working and also the steering wheel buttons working. But he open door sign only shows for a second and then disappers, even if the door keeps open. It only show again when closing the door. No boot open warning and no roof opening/closing warning. I got the android 12 which didn't have the boot logo and had the RDS disabled in the factory settings. The problem is that there are lots of things in factory settings that I dont know what they do in fact...

[@GiuseppeDelVescovo]

Hi! it's possible to connect TPMS tire sensor?

[@AdrianDragan]

Hello. You can install tire pressure sensors (TPMS) and work with this Android unit, you can see my tutorial here: kzbin.info/www/bejne/gaTPaqmQrZ6kaZY I bought from here: s.click.aliexpress.com/e/_AdFDBJ

[@williamguild8567]

Where did you get the frame for the multifunctional display?

[@AdrianDragan]

Hi. I forgot to put a link in the description of the clip, I modified it now and you can find a link in the description of the clip.

[@patrik_k04]

I just installed a newer version of this model and it works great, other than the stalk behind the steering wheel doesn't work. Anyone have any ideas why?

[@AdrianDragan]

Hi. You have not set the car model in the CanBus menu. you can try with Peugeot 207, 307 or 308 (408).

[@patrik_k04]

@@AdrianDragan where do you make this setting? I can't seem to find it

[@WesleyBish]

@@patrik_k04 did you solve the problem? Because I've the same issue.

[@patrik_k04]

@@WesleyBish No didn't find a solution, it seems that I can't change the CanBus settings on my version of radio, I thought of maybe trying the CanBus decoder that came in the box with the radio, instead of the one that works with the multifunctional display, but I haven't tried it yet.

[@WesleyBish]

@@patrik_k04 thanks for you quick answer and it didn't work for me (the orginal one), but you never know. Maybe I did something wrong.

[@blingking501]

It's a shame you can't buy just the stereo trim and not the stereo included.

[@AdrianDragan]

Hello. What trim are you talking about? From the screen, radio, or?

[@blingking501]

Like the trim what is holding the android headunit in. I've seen fascias online but they are for 10" Chinese stereos not your double din 7"

[@AdrianDragan]

There are special 2-din Android units for Peugeot that also fit the 207. They are made for the old Peugeot 3008/5008 but have the same double-din as in the 207, 307, etc: s.click.aliexpress.com/e/_EJCZ6j3

[@KikeAlducin]

Does it have Android Auto / Apple CarPlay?

[@AdrianDragan]

Salutare. Pentru a functiona Apple Carplay si Android Auto ai nevoie de acest adaptor: www.aliexpress.com/item/1005001338419952.html?aff_fcid=e26e5380c73640ef9788061a0dc2b4b6-1643281329964-00697-_AVlBGn&tt=CPS_NORMAL&aff_fsk=_AVlBGn&aff_platform=shareComponent-detail&sk=_AVlBGn&aff_trace_key=e26e5380c73640ef9788061a0dc2b4b6-1643281329964-00697-_AVlBGn&terminal_id=a4886d1a72584241b5df38394da27292

[@AdrianPGT]

Salut! Cum functioneaza dupa un an de folosire?

[@AdrianDragan]

Salut! Functioneaza foarte bine!

[@AdrianDragan]

Salut. Functioneaza perfect!

[@andregeerts1023]

how is the radio receiving of this product I had one before and it was bad

[@AdrianDragan]

Hello. The reception on the FM Radio application seems to be weaker than on the original radio. Anyway, I only listen to online radio. Some FM radio signal amplifiers can be found that are installed instead of the antenna adapter and would solve the problem of FM radio reception. www.aliexpress.com/item/4000041977291.html?aff_fcid=aeb95613a4f644158fc872fe1435d274-1629618290921-01861-_97OE1g&tt=CPS_NORMAL&aff_fsk=_97OE1g&aff_platform=shareComponent-detail&sk=_97OE1g&aff_trace_key=aeb95613a4f644158fc872fe1435d274-1629618290921-01861-_97OE1g&terminal_id=a4886d1a72584241b5df38394da27292

[@miosz2368]

Adrian how to set up a multifuction screen??? I dont have any app in my android, is that related to canbus decoder? My is Model: PA-SS-05/RP5-PA-001For: 2013-up Peugeot & Citroen Vehicles

[@AdrianDragan]

I think your canbus decoder is not compatible with the multifunction screen. You should try PSA-RZ-01: s.click.aliexpress.com/e/_AVUhCZ

[@GiuseppeDelVescovo]

@@AdrianDragan should i buy also the line or the original line works as well?

[@AdrianDragan]

@@GiuseppeDelVescovo Hello. It is preferable to buy with the cable in case it does not match the cable you have now.

[@aalanosman1188]

Can this system also support apple carplay?

[@AdrianDragan]

Hello. You need a CarPlay adapter: www.aliexpress.com/item/1005001338419952.html?businessType=ProductDetail&srcSns=sns_Copy&spreadType=socialShare&bizType=ProductDetail&social_params=20333160686&aff_fcid=783e943c9acb4c2fbfb55b0184dddafe-1632399719145-09376-_AtAYh8&tt=CPS_NORMAL&aff_fsk=_AtAYh8&aff_platform=portals-tool&sk=_AtAYh8&aff_trace_key=783e943c9acb4c2fbfb55b0184dddafe-1632399719145-09376-_AtAYh8&terminal_id=1caff12f1f9d493691c33a5a59bc05ab

[@stari6840]

Hi can you also put here Link for the decoder?

[@AdrianDragan]

Hi. Look here : www.aliexpress.com/item/4000907835515.html?aff_fcid=b7fee578be364b6cb99a82650c9922e1-1645336776815-09157-_ADKLxQ&tt=CPS_NORMAL&aff_fsk=_ADKLxQ&aff_platform=shareComponent-detail&sk=_ADKLxQ&aff_trace_key=b7fee578be364b6cb99a82650c9922e1-1645336776815-09157-_ADKLxQ&terminal_id=f0e1596b0e3c47dda0c4f0b5c347452c&afSmartRedirect=y

[@sabrinagiulini5160]

Ciao Adrian ho provato a montare il computerino di bordo, ma nn si può neanche regolare l'orologio se nn metti la radio vecchia😥 X quanto riguarda il cambus, ho chiesto anche ad Aliexpress, ma nn mi sanno dire se va bene x la mia Peugeot 207 cc del 2008!!! Tu mi puoi dare un consiglio, se conviene metterlo o lasciare il portaoggetti? Nella radio c'è un cambus può servire a qualcosa? Geazie per la risposta.

[@AdrianDragan]

Ciao. Che tipo di Canbus hai ora con il tuo tablet Android? Per azionare i comandi al volante e i comandi per lo schermo del computer di bordo originale, è necessario il decoder canbus PSA-RZ-01: s.click.aliexpress.com/e/_ATl7Iw

[@sabrinagiulini5160]

@@AdrianDragan qui ho chiesto ma nn mi assicurano che vada bene x la mia macchina. Vorrei mandarti una foto del cambus che ho ora, ma nn riesco! Cmq sì con quello riesco a far funzionare i comandi al volante...

[@AdrianDragan]

@@sabrinagiulini5160 Invia foto nel messaggio sulla mia pagina facebook: facebook.com/people/Adrian-PGT-DIY-Repairs/100082513732015/

[@adisorucu]

daca instalez acest ecran+radio, erorile care până acum sunt redate pe ecran și prin semnal audio vor apărea pe noul sistem?

[@AdrianDragan]

Salut. Erorile pot fi afisate numai pe modelele de navigatii Android ce vin cu procesoare Octa-core și decodor canbus Simple Soft XP, din pacate niciodată vânzătorii nu precizează ce decodor canbus este în pachet și pe piața exista vreo 5 modele diferite. Pentru acele mesaje de informare eu recomand sa păstrezi și ecranul original instalandu-l cu ajutorul ramei despre care vorbesc în clip.

[@adisorucu]

@@AdrianDragan mulțumesc pentru reply. deci cel mai probabil trebuie sa reinstalez ecranul original pentru a vedea erorile. dar mă interesează și semnalul audio care îl face mașina când este vreo eroare. acel semnal audio va fi redat după instalarea noului sistem?

[@adisorucu]

iar pe linkul ce l-ați postat exista acum și varianta cu android 11 pe hexa core ( spre deosebire de android 10 pe octa core) puteți recomanda și varianta hexa?

[@AdrianDragan]

Salutare. Da, eu recomand sa instalezi ecranu asa cum spuneai folosind acea rama. Semnalul audio se va auzi chiar dacă nu instalezi ecranul deoarece este emis de un difuzor ce se găsește sub volan.

[@AdrianDragan]

Procesorul hexa este de generație mai noua cu performante ușor peste cele ale procesorului Octa, deci îl recomand. Dar și octacore-ul se descurca foarte bine.

[@hasmaben2233]

Bonsoir sur une 206 plus de 2010 je peut mettre

[@AdrianDragan]

Salut. S'il a le même cadre d'écran, vous pouvez probablement le mettre sur votre voiture 206.

[@massimoandreotti1315]

Ciao vorrei sapere il prezzo...senza telecamera posteriore...ho già sensori

[@AdrianDragan]

Ciao. Ho acquistato da qui, potete trovare anche i prezzi nel link: - Peugeot 207 Android, 7 inch, Octa Core, 4 Gb RAM (tested, recomended): s.click.aliexpress.com/e/_9gETmM - Peugeot 207 Android, 7 inch, Quad Core, 2 Gb RAM: s.click.aliexpress.com/e/_AmeXqy

[@toncho1986]

Hey pal, nice video. Is it possible to install this screen in the 206 Peugeot?

[@AdrianDragan]

Hi. This is for Peugeot 206: www.aliexpress.com/item/1005003131950329.html?aff_fcid=0bd48d9b6a904e328515f5736c8450ad-1640078639404-02955-_A52xr4&tt=CPS_NORMAL&aff_fsk=_A52xr4&aff_platform=shareComponent-detail&sk=_A52xr4&aff_trace_key=0bd48d9b6a904e328515f5736c8450ad-1640078639404-02955-_A52xr4&terminal_id=a4886d1a72584241b5df38394da27292

[@rashad24playa]

Hey Adrian, great video. I don't only understand, why original screen seems to making a failure? And how could we deal with it...

[@AdrianDragan]

Hello. The problem is with the Simple Soft canbus decoder. You can change it with a Raise PSA-RZ-01 decoder and it will be fully compatible with the multifunctional screen www.aliexpress.com/item/4000907835515.html?aff_fcid=716924948d7e4764a12fcfdd99e5f212-1627218083488-04799-_9G9xAk&tt=CPS_NORMAL&aff_fsk=_9G9xAk&aff_platform=shareComponent-detail&sk=_9G9xAk&aff_trace_key=716924948d7e4764a12fcfdd99e5f212-1627218083488-04799-_9G9xAk&terminal_id=a4886d1a72584241b5df38394da27292&tmLog=new_Detail

[@rashad24playa]

@@AdrianDragan Ok it means, I will not get errors such as in yours video? I mean this skipping menu with ambience etc.

[@AdrianDragan]

Yes, if you use that Raise PSA-RZ-01 canbus decoder you will no longer have that error on the screen.

[@twinracers]

@@AdrianDragan okay, but how do you control the multifunction screen? I'd like to get the mileage (km/L) permanently on that screen and use the head unit for navigation

[@AdrianDragan]

See in my video at minutes 15:00

[@GiuseppeDelVescovo]

Hi. Is it possible to upgrade itto Android 11?

[@AdrianDragan]

The update to Android 11 can only be provided by the seller, however I never needed to update any Android media unit.

[@Subliminal3117]

Also is it possible to install android auto on this model?

[@AdrianDragan]

Hello. You can install a module like this one from the video and you will have Android Auto or Carplay: - video Tutorial: kzbin.info/www/bejne/fKbXgmaBir2JjsUsi=kgeOPOQXVKYvc1cY - module link: s.click.aliexpress.com/e/_DDCdUBd

[@GiuseppeDelVescovo]

Where are USB output friendly user sockets pls?

[@AdrianDragan]

You can see in my video at 9:45

[@jeremydierickx4571]

this usable with iphones?

[@AdrianDragan]

Hi. From this link versions S4 are compatible with iPhone for CapPlay: s.click.aliexpress.com/e/_mNpo1OQ

[@faisalahmed239]

How to install rear camera ?

[@AdrianDragan]

Hello. I still don't have a tutorial on how to install the Peugeot 207 reversing camera.

[@Teelsambal]

It's nice but expensive for a chinese brand, don't know about he audio quality and how long it will last.

[@AdrianDragan]

These types of units are expensive because they come in two separate modules: the central unit (radio) and the screen. But there are 9-inch Android units that are a single module with the screen and their price is lower but the performance is just as good. As for the experience of using it over time, I have been using Android navigation on my 308 for two years and it works without problems. The best are the versions with Octa core processors and at least 4Gb ram memory, usually these include DSP (Digital Signal Processor) for audio and the sound experience is better than the original radio unit in Peugeot / Citroen cars, this also includes Apple Carplay modules / Android Auto Wireless which is a great addition. I recommend Android units with Octa Core processors and at least 4 Gb of ram memory for the best experience: s.click.aliexpress.com/e/_Dl7PIln

[@danielduijvestein8791]

Does this system give the error’s in the car?

[@AdrianDragan]

Hello. On this car the system did not give any error, it works very well. However, if you make an original Peugeot diagnosis (Diagbox) you will find an error on the radio because the car's computer sees that the original radio is no longer connected, otherwise it works very well.

[@danielduijvestein8791]

Thank you! But I actually ment, will it give you an error if for example the oil level is too low?

[@AdrianDragan]

@@danielduijvestein8791 The Octa Core processor version (tested) also displays error info messages.

[@PEKOSLECRACK]

Salut est ce que il y a carplay svp ? tres bonne video merci

[@AdrianDragan]

Bonjour. Le modèle dans le lien suivant comprend Carplay : s.click.aliexpress.com/e/_DCqfg4r

[@marioade1]

Adrian cand faci un video te rog pt a conecta Dashcam la Sigurante Te Rog Zi Faina

[@AdrianDragan]

Salutare. Este urmatorul video pe lista, sper la sfarsitul saptamanii viitoare sa fie gata.

[@marioade1]

@@AdrianDragan Multumesc Frumos

[@zozo761]

Adrian 2 din radio Citroën Berlingo Peugeot Partner???

[@AdrianDragan]

Hi. This: www.aliexpress.com/item/32954243555.html?tt=CPS_NORMAL&bizType=ProductDetail&social_params=20260594059&aff_platform=portals-tool&srcSns=sns_Copy&aff_fcid=713a4e13a98649ac80a6fe2a758a9a8d-1626942552743-01923-_AkqtJa&spreadType=socialShare&aff_fsk=_AkqtJa&sk=_AkqtJa&aff_trace_key=713a4e13a98649ac80a6fe2a758a9a8d-1626942552743-01923-_AkqtJa&businessType=ProductDetail&terminal_id=1caff12f1f9d493691c33a5a59bc05ab&tmLog=new_Detail

[@zozo761]

@@AdrianDragan Berlingo 2009?

[@AdrianDragan]

If you have 2DIN radio space, then it fits.

[@SuperSayian86]

Hello friend, nice work! Why did you put the original screen back to the console? Is there a specific reason? I mean it's pretty useless with the android screen also you lose space where you can store your mobile phone, keys etc etc

[@AdrianDragan]

Hi. I put the original screen just to have the information on it. It is true that the Android screen can display the same information.

[@nematkarimi1054]

Does it Work for peugeot 207 1,6 5d size are not ? 🤔

[@AdrianDragan]

Hello. It can be installed in your car without any problem.

[@nematkarimi1054]

@@AdrianDragan thanks 💫

[@nematkarimi1054]

@@AdrianDragan do you think Junsun 9inch also can be inestalled with peugeote 207? kzbin.info/www/bejne/d5CanKFnrrChqrc

[@AdrianDragan]

Can be installed. I'm planning to buy and test version octa-core with 4Gb ram and 64Gb for apps from here: www.aliexpress.com/item/1005003698885304.html?businessType=ProductDetail&srcSns=sns_Copy&spreadType=socialShare&bizType=ProductDetail&social_params=20441556466&aff_fcid=22d4bc62be0b4009b6ee56518193821d-1641588310064-03998-_AqBenY&tt=CPS_NORMAL&aff_fsk=_AqBenY&aff_platform=portals-tool&sk=_AqBenY&aff_trace_key=22d4bc62be0b4009b6ee56518193821d-1641588310064-03998-_AqBenY&terminal_id=f0e1596b0e3c47dda0c4f0b5c347452c

[@tonycerrone2263]

I have put on the a screen lock with code, how can i remove it? I have tried it al. Perfect device that makes my car perfekt

[@AdrianDragan]

Hello. Ask the seller how to do a Hard Reset, that should solve your problem. But you don't know the code anymore and you can't unlock it or what's the problem?