Install Audio AUX Cable and activate with Diagbox (PP2000 or Lexia) on Peugeot Citroen RD4 Radio CD

[@ionmalaescu5305]

Salut Adrian! Am schimbat radio cu un ecran de 9 inch cu tot cu mască cu android 12 două usb ! Merge bine ! 307 sw 2.0 hdi 136 cp cap serie cu toate imbunătătirile cumparat nou cu 22 mii€ pe cind lucram strungar la Bar celona ! In aprilie 2008 azi in iunie 2024 are 188 mii/km fără nici o reparație! O zi bună să ai!

[@AdrianDragan]

Salutare! Super masina, sa o folosesti in continoare cu placere!

[@MrDCoy2010]

Very good tutorial, I chose to get one of those USB to radio things took about 2 min to set up and I can take my calls easier, save myself half the day. and it has many other uses along with it.

[@lacry782]

What version of diagbox you used for activation source?

[@sidahmedalem2309]

Thank you, I 'm getting a 207 and I'll apply this.

[@AdrianDragan]

Hi. You can try the bluetooth module instead of the auxiliary cable, much more convenient kzbin.info/www/bejne/hJKlda2ZrLaXkMk

[@itsshalevfromtaxidashcamer9390]

Adrian, you doing a awesome job! 👍👍👍👍👍👍

[@fouzib7801]

Gracias por todos los temas que nos proporcionas, quiero que pongas un tema para nosotros en el 2015 Citroen . Tu amigo Mohamed Fawzi de Argelia 🇩🇿

[@AdrianDragan]

Thanks for your comment. I'm sorry but I don't have a Citroen, but Peugeot and Citroen are very similar. Anyway, I need a newer Peugeot too :))

[@vatomi81]

Many thx, it's works perfactly!

[@dimitrifoucault3465]

Elle est super ta vidéo

[@saulroan6709]

Thanks from México 🇲🇽👍

[@eminabrezac7031]

Thank you sooo much,I have same car and I never can do this on radio,now I know how to,and I can,THANKS!!!!😊😊😊

[@Wablo28]

thanks men 💕💕💕 greetings from chile 🤪👋

[@eberfernandooyanedeltapia3567]

Pablo tu lograste configurar el dispositivo??

[@mrjohndown4242]

Works! Thank you.

[@АшРаФБарик]

The best tutorial thank you

[@russellpressman1631]

I've just taking my radio out and the back of it already has a plug in the place you put yours there is a spare one next to it tho

[@AdrianDragan]

Remove the white plug that already exists and replace the plug from the auxiliary cable.

[@alaaalali2847]

Is it working?

[@MatthewGanley]

I brought a bluetooth thing u put in the car cigarette lighter socket much easier but the only thing u got to do is pair it with bluetooth with your mobile phone

[@dinmentor]

What do you mean car socket?

[@moniquebennett5248]

The lighter section, mostly on older models of cars .

[@NOLINPALACIOS]

It Would Be Interesting a video of how to install an interface to use the steering wheel controls and recover the computer on board in Peugeot 308. Thank You for your work

[@AdrianDragan]

Hi, Thanks for suggestion, I'm going to do a tutorial in the next few weeks. However, you do not need any hardware interface, just activate the Diagbox software option to adjust the clock and display settings with the steering wheel controls.

[@MonoChorMe]

Wow, really?... So you're saying that I don't need additional hardware? If that's the case, then that is awesome! Because, I read on forums that said that an aftermarket module/hardware, called "PC99-X44" (X44 being specifically for Peugeot) from brands such as «Connects2» or «Autoleads» should be bought, in order to do that very same feature... And that bloody module costs like nearly 100 Euros/90 Pounds!... My car is a 307 SW (2006)

[@AdrianDragan]

Hi, Just re-add the aux cable.

[@TeemuH1]

hello so i just did all this but when the diagbox is connected and i go to radio menu it works perfectly just like in the video but when i disconnect the diagbox it seems like the radio is deactivated i cant turn it on anyway and when i go to menu screen with the multifunction screen audio setting is like creyed out if that maxes sense. i have also tryed to disconect the aux and revert the change in ecu but the problem percists. any help would be apreciated.

[@WolfMagical]

great video! this might be a stupid question but i just bought a Peugeot 308 with AUX already installed, but when i plugged in my phone and used the Source button to select input AUX it said inptut AUX 2 instead of AUX 1 and no sound was coming out. i was just wondering if you may know if i need to reinstall the AUX cable or something?

[@AdrianDragan]

Hello. I think you should enable AUX 1 using Diagbox.

[@WolfMagical]

@@AdrianDragan ok, I'll try it! Thank you for answering 😊

[@lukeloop]

Mine is like that PLEASE let me know if and how it got fixed. I bout an RCA to lightning cable for my iphone hopng it would allow me to connect but I do not get any sound. It is AUX 2 only available. I own a 2011 Peugoet 308 cc. The display screen is orange LED. No usb slots or anything. Much appreciated.

[@AdrianDragan]

Yes, it's works.

[@mrgreenfull3897]

Hi, thanks for the nice video! Can I use Diagbox with bluetooth ODB adapter or it has to be with cable into the computer ?

[@AdrianDragan]

Hello. Diagbox only works with the dedicated interface connected to a computer on which you installed Diagbox.

[@drPeidos]

Citroen C4 2004, same procedure. Thanks.

[@AdrianDragan]

Thanks for the feedback.

[@bungabongo]

Does diagbox allow you to select aux in as default on the radio? My radio comes with aux built in but have to change from fm radio to aux in every time I turn on ignition.

[@AdrianDragan]

Hello. I did not see the option to start multimedia directly on the Aux port.

[@CesGu]

Thanks man

[@zalmbow1011]

Merci 💯

[@bulmacomillas]

Muy bueno 👏👏👏👏

[@chsims1]

I already have an aux connection in the glove compartment, but want to add a BT to aux device close to the radio. If I add similar cable to the one you used in this video, would it still need activating, even though the current aux works fine? Cheers!

[@AdrianDragan]

Hello. Your car already has the AUX IN function activated, so you don't have to activate it anymore. Just plug in the Bluetooth module and it will work fine.

[@chsims1]

@@AdrianDragan Cheers for the reply.

[@joedied5674]

I plugged in my aux to Bluetooth in front of the shifter on my 207cc and it doesn't work

[@lukeloop]

I got an RCA to lightning cable for my iphone 13. I had the AUX 1 and 2 enabled but no audio works. I checked the cable on another stereo so the cable works but now I have no idea what to do next. I plugged into the RCA slots in the glove box and other end into my phone. I have checked volumes and bot AUX 1 and AUX 2. Any ideas please.

[@AdrianDragan]

Hello. Try with another phone.

[@lukeloop]

@@AdrianDragan I did, I think what has happened is the previous owner installed a PARROT hands free phone kit and it got connected to the radio so the RCA slots are not operatable now. I will need to unplug the parrot and see what is going on.

[@AfricaBullcalo]

muy bueno 😀😃

[@HaraldSeeger]

I have retrofitted my 207 with a RD45, new display, microphone installed in the roof. Everything works great except one thing: The audio settings in the menu are greyed out, cannot select them. Do you have an idea? Will I need a diagbox to activate it? Would not like that...

[@howlingbeats2544]

Yes, when upgrading to an RD45, you need to reprogram it. I assume you had an RD3 or an RD4 previously installed. Fortunately, doing such a thing at a qualified Peugeot mechanic doesn't cost much.

[@AdrianDragan]

Right.

[@achimPL]

Hey Adrian, your videos are great, they helped me a lot. Did you ever had an issue with activation of AUX2 in RD4 from 2012? With Lexia I can change input from mode missing to reserved to kml/nomad. My original handsfree radio works well, through aux1, but i also want to actvate AUX2 to use aux cable from headphone jack. Lexia works well because when I am changing aux1 from kml/nomad to conventional, I can choose aux input on my radio, but I i have still missing AUX2 when changing source of my radioreceiver.

[@AdrianDragan]

Hello. I don't really understand why it doesn't work. But don't you have RCA plugs for AUX in in the glove box?

[@hegi.]

What cable do you use for the car to laptop connection, can you please give a link for buying?

[@AdrianDragan]

Hi. You need this cable (Color: FULL LED): s.click.aliexpress.com/e/_DlYZGV7

[@Reichsprasident88]

Good Video!

[@dustraider2940]

I bought a 2009 Peugeot 308 with RD4 radio and the previous owner had already installed the AUX cable. I connected my phone with Spotify playing songs and it plays fine, however the controls behind the steering wheel don't work. I can raise the volume from the radio knob, but not from the controls behind the steering wheel, and next or previous song I have to do it on the phone. You're raising the volume from behind the wheel in the video. The car reads the AUX input so I guess it's already activated with Diagbox.

[@AdrianDragan]

I don't know why you can not adjust the volume from the controls behind the steering wheel, however when using the AUX IN function thet next or previous song can only be used on the phone.

[@dustraider2940]

@@AdrianDragan Do the next and previous song controls work on bluetooth? And can I install one of those boxes with bluetooth on them?

[@AdrianDragan]

@@dustraider2940 This is only has the Audio Line In function and you can not control next and previous song. Perhaps with the original Bluetooth Peugeot.

[@dustraider2940]

@@AdrianDragan Ok, thanks.

[@kacper8554]

THANK YOU!!

[@belgiancacher9727]

Does the car need to be on when connecting the lexia cable?

[@AdrianDragan]

Hi. The ignition switch must be switched on.

[@AndreiaCorreia-zx8vb]

Hello! I have a Peugeot 407 with the RT3 radio. In the glove box I already have the video rca, so I just purchase the audi rca cable with a 3.5 jack in the other end and I am able to use it only in the video mode, so it doesn't work when I'm driving. After this, it's only necessary to activate the aux through the Diagbox and that's it? Or is there anything else to do? Thanks a lot for the help!!

[@AdrianDragan]

Hello. I'm sorry, but I don't know what the steps would be to enable AUX on this RT3. However, try to activate AUX IN audio using Diagbox, you may also have to connect the cable to the radio jack in the dedicated audio aux in port.

[@mrcschmd]

How do I know if AUX is activated? Just bought the car and when I select source I can choose from radio and aux. That means it must be activated right?

[@AdrianDragan]

If you already have AUX in the menu, you don't need to activate it with Diagbox.

[@rokasskirmantas6829]

Will i be able to access the software thru Carly code reader? That would be interesting

[@AdrianDragan]

Hello. I haven't tried but I don't think it's compatible to access the software.

[@jeyfh876]

Hey Adrian, I recently bought a 207 Sport. I tried to connect with the aux port but it didnt work. Then I bought a 12-pin aux cable and installed it like you in this video. The aux 1 input was already activated when I bought the car but it still doesnt work. Tried with two different phones (iOS and android) but there was no sound coming out of the speakers. Could it be that the radio is faulty? Also, the seller I bought the cable from said it works for 207 RD4 from Bosch, but my RD4 is from Continental. Could that also be an issue?

[@AdrianDragan]

Hello. There are two AUX IN. I think your cable is configured for AUX 2, I don't think the radio can be faulty. One more thing: did you say that you already have AUX IN activated, you don't have two RCA plugs in the glove box?

[@jeyfh876]

@@AdrianDragan Thanks for the reply Adrian. Yes, AUX IN was already activated (I bought the car used) but I dont have two RCA plugs in the glove box. Only one AUX IN in the middle console at the bottom, next to a USB port. (just behind the gearshifting stick). But that AUX port didnt work, so I bought the cable. When I press the 'source' button on the radio it changes between radio and AUX IN 1. So I did the same like you in the video. (same spot for the 12 pin connector) I am really clueless atm.

[@marcusf7249]

hello i took the radio out and there was already a socket in the place. It is all wrapped in tape so couldnt find where it went do you know what its for? no aux anywhere else in the car btw

[@AdrianDragan]

Hello. Remove that socket from the large socket. That socket is for AUX IN equipment but was not installed at the factory, so it is unusable. You can plug the plug into your cable instead of that white socket.

[@marcusf7249]

@@AdrianDragan still promptly replying 2 years after uploading?!! what a good sir thank you

[@AdrianDragan]

@@marcusf7249 Why not? I like what I do and if I can be helpful

[@miloszivic7117]

Adrian, do you remember if your volume with aux was lower?

[@AdrianDragan]

Yes, the volume on Aux IN was a little bit lower than on Radio or CD. But for me it was enough.

[@tinovalentic1979]

Does this works on citroen c2 2007?

[@AdrianDragan]

Yes.

[@kierantaylor8588]

When I hook up the digabox and get to the repair section it comes up with "communication error" on pretty much everything any idea why this is??

[@AdrianDragan]

Hello! I'm sorry but I did not encounter this error. Is the car recognized by Diagbox?

[@spikegaliza]

my citroen c4 have bluetooth serial only for calls. this bluetooth don’t work as Audio. how can activate the bluetooth as audio mode?

[@AdrianDragan]

Hello. As far as I know these bluetooth radios are only for calls and cannot be used for streaming music, most likely you should replace the original radio with an RD45 that has a built-in bluetooth module compatible with streaming music, see in my video: kzbin.info/www/bejne/sGanZZ-pgayqjM0

[@osama.h991]

Hola que tal ? Le quería preguntar , que color es el cable del mando del volante que sale hacia la radio , a mi c4 le he puesto una radio y solo me falta saber el cable (kay) para empalmar lo un saludo

[@AdrianDragan]

Hola. Si tiene cables de alimentación dedicados para su automóvil, también debe tener un decodificador canbus detrás de la unidad Android, luego realice la configuración correcta en el menú canbus y los controles en el volante deberían funcionar. Mira aquí: kzbin.info/www/bejne/l6GtpaZvfdt8nMksi=MKO5m3LqfodvD33r

[@r3dwood87]

where tf do i get that soft diagnostics cable to usb from?

[@AdrianDragan]

Hello. Aliexpress: www.aliexpress.com/item/32960539733.html?pvid=e7b32e30-55b4-4e3e-8aef-52ffdc9186ee&aff_platform=link-c-tool&sk=2f6UGta&aff_trace_key=e6febbb3c8df4bce9bf153ccd587f51f-1606161086650-03899-2f6UGta&rmsg=do_not_replacement&scm=1007.23534.124000.0&terminal_id=364d159dab6d4da48c68657f8054a5c8

[@gst_6377]

Mines comes up programing failed how would i fix this?

[@bakautikas93]

i've activated the aux-in in a citroen c5 but i don't get any sound. any idea why?

[@victor-sc2ed]

i hace same problem

[@bakautikas93]

@@victor-sc2ed find the pin diagram of the connector and change the pins to match with aux in 2

[@victor-sc2ed]

@@bakautikas93 ohhh in aux 2 works? Is same than aux 1?? Thanks a lot. I was thinking that is necesary yes or yes aux1 pins

[@victor-sc2ed]

@@bakautikas93 you was ritgh. A lot of thankss..i chabge position of pinss💖💖💖

[@bakautikas93]

@@victor-sc2ed glad to help

[@roperhl]

Whats the diagbox version?

[@AdrianDragan]

Hello. Here was an old Diagbox version, probably 6...

[@santacruz7935]

Tie pe Aux nu ai volum+bass+inalte mai mici fata de radio?

[@AdrianDragan]

Salut. Am raspuns in comentariul precedent :)

[@santacruz7935]

@@AdrianDragan Mersi.Dar unde ca eu nu il gasesc.Ma refer la co ectarea aux originala a masinii prin cablu.

[@eberfernandooyanedeltapia3567]

Es sencilla la instalacion del dispositivo, yo le instale uno bloetooth la pregunta es de donde sacar el cable y el driver para entrar a la computadora del auto???? Necesito orientacion gracias.

[@AdrianDragan]

Hi. Look here: www.aliexpress.com/item/32960539733.html?pvid=e7b32e30-55b4-4e3e-8aef-52ffdc9186ee&aff_platform=link-c-tool&sk=2f6UGta&aff_trace_key=e6febbb3c8df4bce9bf153ccd587f51f-1606161086650-03899-2f6UGta&rmsg=do_not_replacement&scm=1007.23534.124000.0&terminal_id=364d159dab6d4da48c68657f8054a5c8

[@robkon8859]

is there any other way to connect the AUX without losing CD functionality?

[@AdrianDragan]

Hello. Is the Aux socket the same as the cd charger?

[@robkon8859]

@@AdrianDragan For factory settings, pressing "source" you can switch from the radio to the CD player

[@mitsospatras]

Hi. Any cheap diagnostic tool to do this job ??? Βecause the dealer will ask 50 - 100 euro to plug it. Thanks

[@AdrianDragan]

Hi. The only way is to buy a diagnostic tool and use it whenever you need: s.click.aliexpress.com/e/_DndhTRj You can use the Bluetooth mode instead of the cable: s.click.aliexpress.com/e/_DekrsQz

[@facundoyarade7731]

En vez de agujerear el portaobjetos inferior, hubieras sacado el cable auxiliar por el orificio que esta detras de la luz de guantera y queda mas disimulado

[@AdrianDragan]

Everyone is free to put the cable anyway, I chose to put it there because it's more handy.

[@anfahrt]

Thank you for this video. Can you tell me where you can get the PSA Diagbox software?

[@AdrianDragan]

I bought Diagbox software and hardware from Aliexpress, come together.

[@anfahrt]

@@AdrianDragan Can you give me a link?

[@Jocheque]

Hi, I'm just as interested as you and I think this is, I'm saying it because it has the same number as the device that shows 9780.Z5. es.aliexpress.com/store/product/Lexia3-PP2000-with-Diagbox-V7-82-Software-Scanner-for-Citroen-for-Peugeot-OBDII-Code-Reader-Auto/2924002_32956873787.html?spm=a219c.search0104.3.1.4ced47fa72eWjK&ws_ab_test=searchweb0_0,searchweb201602_3_10065_10068_10547_319_10059_10884_317_10548_10887_10696_321_322_10084_453_454_10083_10103_10618_10307_10712_537_536_10713,searchweb201603_6,ppcSwitch_0&algo_expid=ebeccff7-e33e-4c9a-8f6b-3eeae5363304-0&algo_pvid=ebeccff7-e33e-4c9a-8f6b-3eeae5363304

[@AdrianDragan]

@@Jocheque Hi, seems to be the same as what I have.

[@alan36753]

Link died! Will this work with fiat Scudo as radio looks identical

[@aureliantrifa463]

Salut, Foarte sugestiv tutorialul. Intrebare: din comenzile de la volan, se poate trece la melodia urmatoare sau doar se actioneaza doar pe volum?

[@AdrianDragan]

Salutare! Se poate actiona doar pentru volum. Multumesc pentru aprecieri :)

[@haris9494]

@@AdrianDragan please help.. After set convectional and apply get this : programing failed

[@AdrianDragan]

@@haris9494 I've heard of this problem before and I don't know what would be the cause or its solution ...

[@Pinapiupoh]

Would this work for a 207 Peugeot?

[@AdrianDragan]

Hi. Yes, it works on the Peugeot 207.

[@Niko18500]

Hi. Thanks for the tutorial but I have a question. If the aux input is already activated (when I press the “input” button on the radio I have the aux 2 option), do I still have to do the second step (connecting to the computer and all that), or is buying and fitting the cable enough?

[@A.andelo]

Buying the cable is enough. You must insert the PIN in AUX2.

[@Niko18500]

@@A.andelo I see. Thanks for the reply 👍

[@Szalloony]

Can you tell us another diaboxes like one whit app ?

[@AdrianDragan]

Hi. There is also an unofficial software + OBD device called PSA-COM, I haven't tested it: s.click.aliexpress.com/e/_Ded1Fih

[@chrisfragkou]

I have a question, if anyone could answer it would be helpful. I have a Peugeot 207 and I want to do the set up for the aux cable. Is it necessary to do the part with the diagnosis? I mean will the aux input not work if I don't change it using that software in the video?

[@AdrianDragan]

Hi! Yes, it is necessary to activate the function with the diagnosis, otherwise it will not work.

[@bombrc]

did you figure it out, please?

[@marchiegalorio5751]

Is is required to use diagbox?

[@AdrianDragan]

Yes. For activate the AUX IN Option.

[@marchiegalorio5751]

@@AdrianDragan thank you Adrian ☺️ xx

[@AmerAmer-ti7bp]

Can i use another car-boot ? I have a "DELPHI ". Thanks

[@kierantaylor8588]

Question if I buy a pp2000 can I do all of this myself or do I HAVE to take it to a dealer??

[@AdrianDragan]

Hi! By using PP2000 or Diagbox you can activate this option (and many more), there is no need to go to a dealer.

[@kierantaylor8588]

@@AdrianDragan thank you was hoping that was the case I have one ordered thank you

[@exegersha7270]

Hey! Does the PP2000 software run on a Mac? Is there a link to download and try it out? Thank you!

[@AdrianDragan]

Hello. I don't know if there is a Mac version. You will receive the software for Windows on CD when you buy the Diagbox interface.

[@exegersha7270]

@@AdrianDragan Alright, thanks for the quick reply. Great video, well done!

[@KOMA-GAME5]

Where can one buy such a cable?

[@AdrianDragan]

Can buy from here: s.click.aliexpress.com/e/_DE2xd0T

[@brandoncamela2145]

sorry :( I don´t have a Profesional Scanner, Could I do this with a OBD2 common scanner??

[@AdrianDragan]

Hello. Unfortunately, it only works with a dedicated Peugeot & Citroen scanner.

[@M-POWER777]

Where can I order this?, to ship to Europe?

[@AdrianDragan]

Hi. You can buy from next link: s.click.aliexpress.com/e/_DEStb9H I don't know if they deliver to your country.

[@lacry782]

Anybody can help me with this problem: When i try to Save the setting ''Conventional'' the program said: Programming Failed. I use Win7 32bit before that i used WinXP buy same error on both systems. Using Version 7.02

[@Josephch11]

Stephan S I’ve got the same issue but it works fine under any other component in the car

[@davidbolha]

Hi, What about a BlueTooth Module ? Do you have a video for that too ? 🤔 Thanks ! Best Regards,

[@AdrianDragan]

I do not have bluetooth module for now, but I will order and review it. Thanks!

[@marinosn.1642]

I just received the Bluetooth module from AliExpress for the rd4 in a c2 and I'm going to test it today... From a first look the only difference I can see is that the Bluetooth module also needs 12v from the battery or a 12v rail nearby the radio. I haven't removed my radio to see if it's easy enough but I guess it'll be, even if you don't use a soldering tool to make it look like an OEM's job. It cost me 6.73€ shipping included and I live in South Europe. Took 23 days to be delivered. I'll let you know the results soon.

[@amirbazzi1718]

@@marinosn.1642 hi can i know any info of what happened with the bluetooth thing

[@marinosn.1642]

@@amirbazzi1718 Yes of course. I've installed it and it works fine. I used two Scotch locks for the two power wires of the Bluetooth module. I Scotch locked the red wire with the +12v wire of the radio and the black wire with the radio's gnd wire so as the module gets power same time as the radio. Really easy and took me less than 20 minutes including the aux source activation. The adapter I've installed a.aliexpress.com/_d6GGhHa The locks I've used a.aliexpress.com/_dT5xx9a

[@amirbazzi1718]

@@marinosn.1642 thank you !

[@viktorshmits7368]

Может кто подскажет,как подсоеденить магнитолу другую эту оставить??? в роли(бортовова компьютера и разных показаний а другую использувать как музыку хорошую с усилком

[@oleksiiileksus9218]

Можна замінити на нову без старої, але треба перехідник, є моделі дорожчих перехідніків, які будуть працювати з мульти рулем В гривнях це більше 2000

[@ciprianfrancu5985]

Hello Adrian, exista o alterare a sunetului folosind aceasta metoda de input ? Eu am preinstalat pe C4 Picasso audio in, se regaseste in compartimentul storage al pasagerului . Se pare ca sunetul nu este la calitatea dvd-ului/radioul-ui. Multumesc.

[@AdrianDragan]

Salutare. In testele mele am observat doar un volum mai mic nu si o pierdere de calitate.

[@ciprianfrancu5985]

@@AdrianDragan am verificat si eu ..ai dreptate volumul e mai mic, si da impresia de calitate mai slaba. Ajustat volumul ,folosit alt telefon. Pare ok acum. Multumesc.

[@twisted_sista_bmccleanmiss6048]

Hi there Just got a 307cc and have the cable on order, my question is how much is a garage gonna charge me to do the computer side of things?

[@AdrianDragan]

Probably 10-20 Euro.

[@lucasstipe]

Hi. Does it go where the cd charger from the trunk is connected? I mean, if I connect this, I will loose the 5 CD charger from the trunk of the vehicle? Thanks

[@AdrianDragan]

Hello. As far as I know they are on separate jacks, so it doesn't affect CD charger.

[@lucasstipe]

@@AdrianDragan oh thanks. I thought the plug you disconnected was the cd charger from the trunk

[@pablocastellanos956]

Well, but where I buy the usb cable, please tell me, and where do I get the program to program the radio

[@AdrianDragan]

Hello. But here I don't show you how to mount a USB cable, I show you how to mount and activate the Aux IN cable. Links: - Aux IN Cable: www.aliexpress.com/item/32870731809.html?aff_platform=shareComponent-detail&sk=_AfcZaT&aff_trace_key=580f19ec45554c948558c7851afcaef2-1608644564837-08634-_AfcZaT&terminal_id=364d159dab6d4da48c68657f8054a5c8&tmLog=new_Detail - Bluetooth module for AUX IN Audio Peugeot / Citroen: www.aliexpress.com/item/32826594463.html?aff_platform=shareComponent-detail&sk=_Af387Z&aff_trace_key=1e9de9f9912a4083aab181d24053d488-1608644645392-05181-_Af387Z&terminal_id=364d159dab6d4da48c68657f8054a5c8&tmLog=new_Detail - Diagbox hardware / software interface: www.aliexpress.com/item/32960539733.html?pvid=e7b32e30-55b4-4e3e-8aef-52ffdc9186ee&aff_platform=link-c-tool&sk=2f6UGta&aff_trace_key=e6febbb3c8df4bce9bf153ccd587f51f-1606161086650-03899-2f6UGta&rmsg=do_not_replacement&scm=1007.23534.124000.0&terminal_id=364d159dab6d4da48c68657f8054a5c8

[@pablocastellanos956]

Sorry sorry for my mistake, i mean the aux cable

[@adurrans]

I've gone to do this yet there's already a cable in the space you mentioned 😬 and the plug doesn't fit the other side. What's that cable there for? Any workaround?

[@AdrianDragan]

Simple: remove the plug that is stuck there and put the plug from your cable ;)

[@attaradio2724]

Andy Durrans did it work for you, i have the same problem. But i did not have the balls to take out the other pin 😂

[@adurrans]

@@attaradio2724 yup worked absolutely fine, haven't noticed any effects from the old cable not being there either, everything still works (steering wheel controls etc).

[@attaradio2724]

@@adurrans Thanks for responding, took the old plug out and put the new one in. Works just fine!

[@IanOcampoPodRider2016]

can you do this but use a bluetooth 12pin adapter for a 2007 Peugeot 207 with an RD4 or can it only be aux?

[@AdrianDragan]

Hello. All you need to do is replace your auxiliary cable with the bluetooth module kzbin.info/www/bejne/hJKlda2ZrLaXkMk Or you can buy a bluetooth module that connects to the RCA Aux IN jack: www.aliexpress.com/item/32821770160.html?aff_platform=shareComponent-detail&sk=_AN7CU1&aff_trace_key=c6317c96f7ae48bf8b205390025c93e8-1609275238071-02903-_AN7CU1&terminal_id=d92441f0a7b94ef29dcdfc816a4dd068&tmLog=new_Detail

[@stefannikolic4771]

Can you intall diagbox on windows 11?

[@AdrianDragan]

Welcome. You can install Diagbox on Windows 11 using a Virtual Machine (eg VMWare). Usually when you buy a Diagbox interface (hardware + software) on Aliexpress you will get the option to install the software in the Virtual Machine. My recommendation is to ask the seller if it is compatible with Windows 11 s.click.aliexpress.com/e/_DEZw97b

[@n.grncharov]

Hello, thanks to your video, i managed to instal the cable. I went to official peugeot service and they activated the aux input. But the problem is that the audio that I'm getting from aix input is too low compared with fm sound. Any suggestions how to fix this?

[@n.grncharov]

Is there a a option to adjust volume from pp2000? Or the problem is in something else?

[@AdrianDragan]

@@n.grncharov Usually the aux input sound is not too loud.

[@iker634]

Where can i get thé cable to connect thé computer to my car ?

[@AdrianDragan]

Hi. Here: s.click.aliexpress.com/e/_DncBegx

[@dipre1990]

is there a possibility to connect usb with music to this aux cable? and can the player play?

[@AdrianDragan]

No. You need something like this: kzbin.info/www/bejne/a2PLpnuPlLZgqMk

[@joseluisconde2432]

Doesn't it ask for a radio PIN when reconnecting it? Does anyone know?

[@AdrianDragan]

Hello! If you disconnect the radio from the power supply you do not need any PIN code, the radio security is based on VIN (vehicle identification number).

[@kimmy607]

Help I don't have aux option on my source button... wire is plugged in fine citroen c2 car... am I suppose to download anything as this is an 08 car no option for bluetooth ether

[@AdrianDragan]

You also did the software activation as you see from the minute 3:09 in my video?

[@kimmy607]

@@AdrianDragan no I've not got that wire... will I have to take it to a specialist to install software?

[@AdrianDragan]

@@kimmy607 Yes, you must go to someone who has Diagbox software / hardware diagnostics for Peugeot Citroen.

[@65ciaky]

Bună ziua . Cum putem comunica pentru o astfel de instalare , pe un C4 . Mulțumesc anticipat...

[@AdrianDragan]

Buna ziua. Dati-mi un mesaj pe aceasta pagina: facebook.com/psadiyrepairs

[@65ciaky]

@@AdrianDragan Bună ziua . Încerc și m-aș bucura să reușesc ... E-mailul meu . [e-mail]

[@raykaligis808]

Is it works for peugeot 307 sw? Thank

[@AdrianDragan]

Hello. What year is the car from?

[@raykaligis808]

@@AdrianDragan 2003

[@AdrianDragan]

@@raykaligis808 If you don't have the same type of radio as in my video, it won't work. This type of radio you see in my video was installed on the Peugeot 307 starting in 2004.

[@raykaligis808]

@@AdrianDragan its same with yours

[@AdrianDragan]

@@raykaligis808 if it is the same as my radio it should work.

[@Cicada-df5lq]

Works on peugeot 207 2010?? Thanks.

[@AdrianDragan]

Hello. Yes, it works on the Peugeot 207 as well.

[@benny_bonomolo]

hi, I have a 2009 Citroen C3 HDi, I bought your same aux cable. if I press the SOURCE button it says INPUT AUX 1 but if I try to connect the phone and play the music I don't hear anything. What can I do?

[@AdrianDragan]

Hello. It probably sounds crazy, but check if you have the maximum volume on the phone and radio on the car. If it does not work, the cable may not be good.

[@benny_bonomolo]

@@AdrianDragan hi, when I try to turn up the volume nothing appears in the display, it will probably be the cable .. I don't know

[@jor4274]

Hi, I've got a 207 with a Rd4N1M-03 radio(that's what's written in the side label). I just want to connect a usb without losing wheel controls etc. What do you think is the best and easiest option?(I've never done anything like this in a car). Would this work for my car? Thanks for your channel! I've got also a 308Sw and I'm also thinking in changing the radio to an android 2din as per another video you've shown

[@AdrianDragan]

Hi! What you want in your 207 you need this: www.aliexpress.com/item/32794355804.html?aff_platform=link-c-tool&sk=_sda5Op&aff_trace_key=e038ed7c59634d69aa48a461d3576116-1593370100994-06691-_sda5Op&terminal_id=3a8f5add39814c9a9eb3200bc67debac&tmLog=new_Detail&aff_request_id=e038ed7c59634d69aa48a461d3576116-1593370100994-06691-_sda5Op The best option is an RD43 or RD45 radio: www.aliexpress.com/item/32855227266.html?aff_platform=link-c-tool&sk=yIfUADK&aff_trace_key=34e357f4ea9043b99525d3af0695ae0d-1593370288494-05871-yIfUADK&terminal_id=3a8f5add39814c9a9eb3200bc67debac&tmLog=new_Detail&aff_request_id=34e357f4ea9043b99525d3af0695ae0d-1593370288494-05871-yIfUADK Tutorial for upgrade radio: kzbin.info/www/bejne/sGanZZ-pgayqjM0

[@jor4274]

@@AdrianDragan thanks! And i have to activate the auxiliary, right? (I mean, it is not plug and play)

[@AdrianDragan]

@@jor4274 Hi. Yes, you need to enable AUX IN for your radio.

[@jor4274]

@@AdrianDragan thanks!!!!

[@anllq]

I have problem with sound quality , i have factory aux port in my peugeot 207 gti , and radio have better sound then aux , if you can help , thanks !

[@AdrianDragan]

Auxiliary audio input needs a stronger signal, I can't tell you another solution.

[@dotnetdevni]

Does it allow audio thru that or just charging

[@AdrianDragan]

Allows audio only.

[@potatoman9116]

@@AdrianDragan please can you do video for bluetooth qnd how to activate i really hope you do that

[@potatoman9116]

@@AdrianDragan i have 2012 308 and i need bluetooth for it

[@AdrianDragan]

In a month I will also make a clip on how to install a bluetooth aftermarket unit.

[@davidbolha]

@@AdrianDragan Can you have both installed ? So the Aux Cable + BlueTooth module. 🤔

[@juanignaferch]

Hi! Could you do this in a Peugeot 206? Thanks

[@AdrianDragan]

It may be compatible, but it depends on what radio model you have.

[@juanignaferch]

@@AdrianDragan I have the RD3 model. Your channel is great. Juan from Argentina

[@AdrianDragan]

This is for the RD3: www.instructables.com/id/Aux-in-jack-for-VDO-RD3-00-car-radio-Peugeot-Cit/

[@juanfranciscograziadio466]

@@juanignaferch hola Juan ! Tengo un 307 2007 lo probé y me funcionó perfectamente !!!

[@mohamedms2472]

There is also a solution to solder directly the Jack wires on the chip inside the radio for rd3 on 206

[@blablabla4606]

Hi Adrian work aux cable on Peugeot 308 radio rd4 ?

[@AdrianDragan]

Yes, it works. This radio I installed the aux cable is RD4.

[@eliedrone]

Thanks a lot for you video. I have the original display screen and a new autoradio. Is it possible to configure display screen with pp2000? Or I need to change it? Thanx

[@AdrianDragan]

Hi. What type of car radio do you have now?

[@eliedrone]

@@AdrianDragan hi Adrian. Thanks ! A low cost autoradio

[@AdrianDragan]

@@eliedrone Reconnect the original radio, set the clock and then replace the new radio.

[@eliedrone]

@@AdrianDragan don’ t have anymore the original car radio..

[@wojtek9151]

Hi all, any idea if it would work if I connected a USB port to the aux cable adapter through the jack. I'd like to listen to my music from my USB stick this way.

[@AdrianDragan]

Hello. You cannot put USB on the auxiliary input. To listen to music on USB you need something like this: www.aliexpress.com/item/32794355804.html?aff_platform=link-c-tool&sk=Ti3KDXE&aff_trace_key=26a0c2efe81f4fdbbf58f03234be324b-1598984892774-03893-Ti3KDXE&terminal_id=364d159dab6d4da48c68657f8054a5c8&aff_request_id=26a0c2efe81f4fdbbf58f03234be324b-1598984892774-03893-Ti3KDXE kzbin.info/www/bejne/a2PLpnuPlLZgqMk

[@josemontoyamotos290]

Es necesario conectarlo al ordenador para poner el cable auxiliar??? 😱😱😱

[@AdrianDragan]

Yes, it is necessary to activate this function.

[@josemontoyamotos290]

@@AdrianDragan but it will be necessary to control it from the wheel

[@AdrianDragan]

@@josemontoyamotos290 From the wheel you can only control the volume.

[@Wednesdaaayyy]

I was going through these stages when I realised the previous owner had already done this yet removed the chord. Will I still need to set it up with the computer or just re-add an aux chord?

[@henriquecontreira1692]

Just need to re-add

[@fernandorodriguez451]

a question. Where do I get the car connector to the PC, to perform the scanner?

[@AdrianDragan]

You can find links in clip description.

[@czrbeats]

Hi does this method work on a Peugeot 207 2007 plate?

[@AdrianDragan]

Yes.

[@alaabu.kajeel3219]

I have Renault fluence 2015 i need pro for pc and connect by obd2 to change language and clock can help me thanks allot 🤠

[@AdrianDragan]

Hello. I'm sorry but I don't know anything about Renault.

[@AdrianDragan]

Links: - Aux in cable: www.aliexpress.com/item/33059799461.html?aff_fcid=871478a04f6d40de9e06ee4e2073b83f-1636372806882-09339-_ADL6kh&tt=CPS_NORMAL&aff_fsk=_ADL6kh&aff_platform=shareComponent-detail&sk=_ADL6kh&aff_trace_key=871478a04f6d40de9e06ee4e2073b83f-1636372806882-09339-_ADL6kh&terminal_id=a4886d1a72584241b5df38394da27292 - Bluetooth Audio AUX IN Module: www.aliexpress.com/item/32826594463.html?aff_fcid=e430fe7fac5a411580a111f952015343-1636372834727-04209-_AD0ynP&tt=CPS_NORMAL&aff_fsk=_AD0ynP&aff_platform=shareComponent-detail&sk=_AD0ynP&aff_trace_key=e430fe7fac5a411580a111f952015343-1636372834727-04209-_AD0ynP&terminal_id=a4886d1a72584241b5df38394da27292 - Diagbox interface, Diagnostic functions activator Tool for Peugeot & Citroen: www.aliexpress.com/item/32922533559.html?aff_fcid=65d77aee4fce48bba633215c4edce2a4-1636372853115-05532-_ApCya5&tt=CPS_NORMAL&aff_fsk=_ApCya5&aff_platform=shareComponent-detail&sk=_ApCya5&aff_trace_key=65d77aee4fce48bba633215c4edce2a4-1636372853115-05532-_ApCya5&terminal_id=a4886d1a72584241b5df38394da27292

[@linus.]

Which "color" to choose on the AliExpress product page of the Diagbox? Don't know which version I need and what the differences mean.

[@AdrianDragan]

@@linus. Hi. Choose "Color: 9.68 Lexia Full Chip" It is the newest software and the best hardware.

[@marianbabanescu6016]

Salutare unde pot activa și eu auxiliarul la un Peugeot 307 ? Ma poți ajuta ?

[@AdrianDragan]

Salut. Te pot ajuta dar eu sunt din Tulcea. Din ce localitate esti?

[@TheStanic89]

Can i activate AUX trough the Delphi diagnostic software?

[@AdrianDragan]

Hello, Can only be activated with Diagbox (PP2000 or Lexia).

[@Fredoespressosketos]

Hi i need your help i follow your way bust stil not working when i pug my aux it doesnt play and aux n1 its open.. any suggetion?

[@AdrianDragan]

So you activated the function with Diagbox? Did you press the "Source" button on the unit to select Aux IN?

[@Fredoespressosketos]

@@AdrianDragan ofc I do.. it takes me to aux 1 and nothing.. I hear something like no signal like 'snow' on tv..

[@AdrianDragan]

@@Fredoespressosketos I'm sorry, unfortunately I do not know what the problem is...

[@Fredoespressosketos]

@@AdrianDragan ty for your time