Install Bluetooth Audio Module on Peugeot & Citroen Radio RD4, RD45, RD43

Peugeot Citroen install bluetooth module radio. Activate Audio Aux IN with Diagbox. Tested it on RD4, RD43, RD45 radio CD Peugeot Citroen.
Links:
- Plug and play Bluetooth module + microphone: s.click.aliexpress.com/e/_DCF...
- Bluetooth AUX Audio Adapter with Microphone Handsfree: s.click.aliexpress.com/e/_DFs...
- Bluetooth Module Stereo AUX-IN Audio Adapter: s.click.aliexpress.com/e/_DF2...
- Bluetooth Module RCA Stereo AUX-IN Audio Adapter: s.click.aliexpress.com/e/_DE3...
- Diagbox / Lexia 3 / PP2000 (choose the most expensive, it's the best): s.click.aliexpress.com/e/_DDo...
- Quick Splice Terminals Connectors: s.click.aliexpress.com/e/_APS3lF
- Radio removal keys: s.click.aliexpress.com/e/_DlT...
- Peugeot & Citroen Radio RD4, RD43, RD45 wiring diagram (pinout): diyrepairs4car.blogspot.com/2...
Original Radio RD45 bluetooth with screen type "C", cables and microphone, including VIN coding: s.click.aliexpress.com/e/_DEt...
Original Radio RD45 bluetooth (only radio unit): s.click.aliexpress.com/e/_Dly...
Red screen Type "C" : s.click.aliexpress.com/e/_DEE...
Buy Andoid Multimedia Player:
- Peugeot 407: s.click.aliexpress.com/e/_AZ23LP
- Peugeot 207 9 inch Android: s.click.aliexpress.com/e/_9wrqtb
- Peugeot 207 7 inch Android: s.click.aliexpress.com/e/_AU2wqd
- Peugeot 308 Android: s.click.aliexpress.com/e/_9i1FVj
- Peugeot 206 Android 7 inch display: s.click.aliexpress.com/e/_AgER8l
- Peugeot 206 Android 9 inch display: s.click.aliexpress.com/e/_AUV1dL
- Peugeot 3008 Android 7 inch: s.click.aliexpress.com/e/_9HPfCl
- Peugeot 3008 Android 9 inch (2009+): s.click.aliexpress.com/e/_AVWhhP
➢ If you like, you can BUY ME A COFFE: paypal.me/adioperator?locale....
➢ Facebook Page: / adrian-pgt-diy-repairs...
➢ TikTok: / adrianpgt
MY OTHER KZbin CHANNELS
➢ Skoda Volkswagen Audi Seat Tutorials: / justacar
➢ Dacia Renault Tutorials: / @adriandrnro
Music by LiQWYD
Free download: hypeddit.com/link/ghiu91
Comment avoir le Bluetooth sur la autoradio Peugeot /Citroën/DS

[@AdrianDragan]

Links: - Plug and play Bluetooth module + microphone: s.click.aliexpress.com/e/_DErPTy7 - Bluetooth AUX Audio Adapter with Microphone Handsfree: s.click.aliexpress.com/e/_DFsvCNv - Bluetooth Module Stereo AUX-IN Audio Adapter: s.click.aliexpress.com/e/_DF2f3lz - Bluetooth Module RCA Stereo AUX-IN Audio Adapter: s.click.aliexpress.com/e/_DE3GQex - Diagbox / Lexia 3 / PP2000 (choose the most expensive, it's the best): s.click.aliexpress.com/e/_DDoo8O5 - Quick Splice Terminals Connectors: s.click.aliexpress.com/e/_APS3lF - Radio removal keys: s.click.aliexpress.com/e/_DlT9q6F - Peugeot & Citroen Radio RD4, RD43, RD45 wiring diagram (pinout): diyrepairs4car.blogspot.com/2020/05/peugeot-citroen-rd4-rd43-rd45-wiring.html

[@tajsam9412]

Hi Adrian, i installed plug and play module and after i turn off car i still can connect to bluetooth. Is that ok, does it drain battery? Thanks.

[@AdrianDragan]

Hello. Don't worry, it won't drain your battery. If you want the bluetooth to stop being powered after you stop the engine, you will have to power it from the lamp bulb in the glove box.

[@leblackdogpubsaintaignan29]

Bloody brilliant mate. Took eight months to get around to it and literally three minutes to do and working without any further issues. Nice one. Thanks.

[@HenrikCarlJohanPeltonen]

Thanks Adrian, your videos are really helpful; I just installed my module yesterday following your guide.

[@ciapekgaming3463]

Thanks! Very helpful video, installed my bluetooth yesterday following your guide, took about 15-20min (my quick splice didn't worked at first time, i had to took isolation from wires and it worked)

[@herrkriegel]

Great video, really helped me a lot. Only difference was that on my Citroen C4 RD4 radio there was no cable on pin 11 so I used pin 15 instead and it worked. Hope it helps someone. Cheers

[@drkabajt]

Same thing on my P308 with RD4. I discovered that pin 15 is +12V switch so I used it

[@DavidxDuruelo]

It happens the same in my Peugeot 308SW. Yellow wire is in pin 15. Pin 11 is empty.

[@DionisisMaximum98]

In my Citroen c5 2010 is number 8. Also you need to keep it plugged in the radio to see which cable is the 12v

[@MagnusAndersen1996]

Trying this now, hope it works !

[@Geintje22]

@@DionisisMaximum98 this is why I couldn’t find my switched 12v thx!

[@eyeanim]

The Aux1 tip saved my day! Thank you.

[@IanOcampoPodRider2016]

Thank you! Very informative, I appreciate your work!

[@maryevans6923]

Great video and very instructional. I used your link to purchase and now have functioning bluetooth and can now hands free call using siri on my phone. Also the music playback from my phone through the radio is awesome. However I did have to enable Aux1 using Diagbox. Many thanks Adrian.

[@Michael-ks2yi]

Quick question, do you need the original citroen diagbox to use manual configs or can 3rd party like 50$ knockoffs work the same?

[@titoviera3011]

Great video, Just i was looking for

[@davidbolha]

Me too. 😇😆

[@RadiYahia]

Thank you for this!!

[@florinzembre1791]

Salut, stima pt tot ce faci chiar e foarte util

[@AdrianDragan]

Multumesc pentru aprecieri :)

[@bleaks3080]

hey great video i had a few questions so first of all does this change the quality of the original speakers? Do the steering wheel controls still work after installation? and the last one can it be done with all types of suitcase?? thank you very much great video :)

[@BenjaminGillesgillben]

Super Video, hatte mir auch solch ein BT Adapter geholt und mich gewundert dass es nicht funktioniert, wusste nicht dass man den Eingang freischalten muss. Funktioniert super. Danke

[@torque5070]

Wie genau haben sie es denn freigeschaltet? Sie haben aber nicht das Gerät dafür gekauft oder ?

[@BenjaminGillesgillben]

@@torque5070 Sie benötigen die Citroen Diagbox ( Software ) und ein Auslesegerät für den Laptop (Lexia 3), oder mal bei einer Citroen Werkstatt nachfragen, ob die das freischalten können :).

[@torque5070]

@@BenjaminGillesgillben ich habe schon einen aux Ausgang im Radio. Das müsste also bei mir ohne diese Software gehen nehme ich an

[@dinmentor]

Great video, thanks! :)

[@dimgan93]

Thank you for the video:-)

[@miquelgr6018]

Great tutorial, thanks. Is it mandatory to run the Diagbox configuration? I already see the "Input" option in the radio when clicking at "Source" button??

[@AdrianDragan]

Hi. If you already see "Input" when you press the Source button, the function is activated and you probably have the RCA plug in the glove box. Check it out :)

[@jeremywilliams3196]

Hi Adrian, I have "Aux input" as a source in my car and I have a RCA plug in my glove box but it doesn't seem to work. Is the RCA plug in the glove box the way to connect to the Aux input? Is there anything I need to do to make this work? Thanks.

[@takoulas1978]

i just installed mine and everything works fine without using diagbox. Thank you

[@AdrianDragan]

Hello. That's great! Your radio already has the Aux IN function activated.

[@TamasKoos199753]

Hello Adrian! Great video. I have only one question. Can you use the radio's buttons to skip between songs using this module?

[@AdrianDragan]

Hello! For this bluetooth module the radio buttons cannot be used to change the track. But with this usb music player you can do whatever you want, see also my video from the link below: www.aliexpress.com/item/4000259485934.html?aff_platform=shareComponent-detail&sk=_dZb5IAb&aff_trace_key=0a20b206f9554695a0fc66cdf0ebd312-1595739885153-02248-_dZb5IAb&terminal_id=364d159dab6d4da48c68657f8054a5c8&tmLog=new_Detail&aff_request_id=0a20b206f9554695a0fc66cdf0ebd312-1595739885153-02248-_dZb5IAb Tutorial: kzbin.info/www/bejne/a2PLpnuPlLZgqMk

Excelente video!

[@7085Chris]

Many thanks Just installed the module and it works great. The only issue I'm having is that Pin 11 was not switched live so currently connected to pin 12 battery which is not ideal. I had a good probe across the entire switch couldnt find a switched live which seems abit odd. Peugeut 407 SE

[@AdrianDragan]

Hello. Try to power from the positive wire of the lamp in the glove box.

[@soroushfisherman167]

Thanks Adrian, worked perfectly 👌👌

[@mikeburnett3988]

Hi Adrian. Just to ask, I have a 2010 Citroen C3 Picasso and the stereo does not have Bluetooth. The tutorial is great but do I need to configure the stereo if I fit this. It is a Bosch stereo that comes as standard. Many thanks.

[@AdrianDragan]

Hi! Yes, you need to configure the radio to activate the Aux IN function as you see in my clip.

[@fchichois2250]

Thanks very much, extremely useful and interesting. 2 questions 1/ is it compatible with a Peugeot Partner tepee > 2005? 2/ can I use my phone, make and receive calls through the loudspeakers?

[@AdrianDragan]

Hello. 1. If you have RD4 type radio, you can use bluetooth module. 2. You need this set to use your car speakers to hear phone calls: www.aliexpress.com/item/32826594463.html?aff_platform=shareComponent-detail&sk=_dUYqCGe&aff_trace_key=db34bffd454f43fdb5fa402529657ea7-1601095775499-07313-_dUYqCGe&terminal_id=3a8f5add39814c9a9eb3200bc67debac&tmLog=new_Detail

[@christophe8292]

Hello Adrian, thanks for the video which gives ample time to follow each step. What module should I get for a Peugeot 807, year 2008? thanks a lot!

[@AdrianDragan]

Hello. This would be the easiest module to install. But make sure it is compatible with the radio jacks on your car. www.aliexpress.com/item/32826594463.html?aff_fcid=8dd412c5ed964f848eb1ce1226169bf6-1622123674255-09622-_AlNrnv&aff_fsk=_AlNrnv&aff_platform=shareComponent-detail&sk=_AlNrnv&aff_trace_key=8dd412c5ed964f848eb1ce1226169bf6-1622123674255-09622-_AlNrnv&terminal_id=a4886d1a72584241b5df38394da27292&tmLog=new_Detail

[@GregDravenActor]

I have the exact same car. Which module did you get? Do your parking sensor beeps still work?

[@nash1338]

Hi Adrian, great video! How good is the quality over Bluetooth ya? I'm audiophile nitpicking here but is it noticeable vs aux cable only connection? Can we have aux 2(3.5mm only) and aux 1 for Bluetooth? I also saw some online with a microphone to be put into the 3.5mm port connected to Bluetooth. Can we still play music on that?

[@AdrianDragan]

Hello. The audio quality is good but the volume level is lower.

[@nash1338]

@@AdrianDragan wow thanks for the super quick reply! Is it lower with cable or Bluetooth?

[@SheepWrestlers]

Great video, how do you skip tracks, play and pause etc? Do the buttons on the radio unit work for that?

[@AdrianDragan]

Hi. With this simple Bluetooth mode you can not take a skip or break using the radio buttons, only from the phone you can do this.

[@ernestgrigoryan]

Hola Adrian, con esta instalacion se pueden seguir utilizando los controladores (subir bajar volumen, cruise control,etc) detras del volante?

[@AdrianDragan]

Hola. Todavía puede usar los controles del volante y cruise control.

[@arm2644]

Do you have a video of the unboxing, installation and use of the Diagbox interface/tool you bought in aliexpress to see if it is worth buying?

[@AdrianDragan]

I don't have unboxing or review video because my interface is very old (about 10 years). I'm thinking of buying a new one and making a video about it and how to use it.

[@Takko09]

Great video my friend!👍🏻 I think I did every step as you showed(did it twice) and connected my phone but I still have a problem in my car where i can not hear anything from the speakers when switching to Aux 2 source. The only step I didn't do was the activatin step with the Diagbox because I already had an aux-adapter in place which worked perfectly before I changed it to this bluetooh receiver. When I switch to the radio channels, all the speakers work. Is it right that in my case it should work from the get go or do I still have to connect a Diagbox and go to the car config to activate something to work? Sorry if this was already asked but i couldn't find it.

[@AdrianDragan]

Hello. From what I remember you have to enable Aux 1 with Diagbox. Or change the pins on the bluetooth jack as the wires on the original aux jack are placed. Take a look at the pinout in the picture, it may help: diyrepairs4car.blogspot.com/2020/05/peugeot-citroen-rd4-rd43-rd45-wiring.html

[@potatoman9116]

@@AdrianDragan is the quality of the sound good or i should just use my mp3 modilator

[@nikolazi99]

Hello, were you able to solve this problem? My bluetooth module still hasn't arrived, but I only have Aux 2 source

[@temnur]

Same question for me

[@qvoffka]

Nice video. +12 with key is not pin 11 but the on close to constant +12V (pin 12). Check with voltmeter and radio attached (otherwise there will be different voltage).

[@SamiKankaristo]

Exactly. The wire colors were different for me, but the ones you listed are correct (pin 12 for +12, and pin 16 for GND).

[@Plutus1976]

Nice video, this aux in bluetooth audio won't cancel the hands free bluetooth from origin?

[@AdrianDragan]

Hello. I think it won't cancel the original bluetooth.

[@nicodeamous111]

Great video - well done. Very detailed and easy to follow! I have a Peugeot Partner with the RD4N head unit so all should work. Currently I can play music from my phone via the Input option and by plugging in a 3.5mm jack into my android device. By installing the Bluetooth module, I assume this will no longer work (fine) but will the menu option (input) relate to the new Bluetooth module or do I still have to change the canbus settings to include aux (I would get the local dealer to do this rather than buy the software and associated hardware)? Thank you in anticipation

[@nicodeamous111]

I note that someone else asked the same question and that your response was that everything should work without a visit to the dealer. Fantastic.

[@AdrianDragan]

Hello. If I understand correctly, you already have an active AUX IN port, so you can connect the bluetooth module instead of the white plug that is for the AUX cable behind the Radio unit. So, theoretically, you no longer need to activate the AUX port with diagnosis because it already works for you.

[@nicodeamous111]

@@AdrianDragan all connected and working well. Thank you again.

[@russellrrenshaw1730]

Merci bien ! ;-)

[@chema8169]

Thank you!! One of the screws fell through the obd hole, do you think it could be dangerous? :s

[@AdrianDragan]

Hello. There is no danger. I also dropped the screw there, I even dropped an OBD bluetooth adapter :))

[@Baplah]

Thanks for this video. Do you have any other recommendation to buy a Diagbox as your previous link is not working anymore ?

[@AdrianDragan]

Hello. I solved the problem with the link, here it is: www.aliexpress.com/item/4000077945226.html?aff_fcid=23d2e9b7a05d4732b5c1cd1e1fefb060-1619608332636-02375-_AfokTF&aff_fsk=_AfokTF&aff_platform=shareComponent-detail&sk=_AfokTF&aff_trace_key=23d2e9b7a05d4732b5c1cd1e1fefb060-1619608332636-02375-_AfokTF&terminal_id=364d159dab6d4da48c68657f8054a5c8&tmLog=new_Detail

[@enzi7717]

Hello Adrian, thanks for you video tutorial. I have a question for you about the settings, after I installed a bluetooth module and it works, I don't have the sound. I need to setting my car stereo as you made in tutorial, but I don't know how do that. I did go to meccatronic shop but they say: only citroen affiliates car workshop have the software that can do it. I see you in tutorial did it, can you help me, please?

[@AdrianDragan]

Hello. Yes, you must activate the AUX IN Function using that Diagbox interface cable. You can do this too if you buy an interface and install the software on your laptop, you can find a link in the description of my video.

[@st.giorgos]

Hi Adrian. Nice videos. I have a DS3 with the type A screen (simple type) and no bluetooth. What is the easiest and cheapest way to connect a mobile to the car stereo with microphone? Is there a dongle/adaptor or do I have to change the screen and radio together?

[@AdrianDragan]

Hi. This is the easiest module to connect, but for him you have to activate AUX IN usibg Diagbox if it is not already activated: www.aliexpress.com/item/32826594463.html?aff_fcid=8dd412c5ed964f848eb1ce1226169bf6-1622123674255-09622-_AlNrnv&aff_fsk=_AlNrnv&aff_platform=shareComponent-detail&sk=_AlNrnv&aff_trace_key=8dd412c5ed964f848eb1ce1226169bf6-1622123674255-09622-_AlNrnv&terminal_id=a4886d1a72584241b5df38394da27292&tmLog=new_Detail

[@st.giorgos]

@@AdrianDragan thanks for the reply. Some reviews say that this product uses the battery even after the car is turned off.

[@AdrianDragan]

@@st.giorgos If the power cord connections are made on the positive wire controlled by the ignition switch you will have no problem discharging the battery. To be sure you have to check the positive wire if it still has current after you stop the engine, use a multimeter. In fact, if the bluetooth module is still available after you have stopped the engine, it means that it is continuously powered.

[@JoseVargas-dx7wz]

Adrian, do you know of somethign we can do with the above screen on a 408? putting an andorid system may work for replacing the audio system, but that still have to llok down and out of the road to follow instructions. Is there something to replace the little screen above the torpedo with an android device?

[@AdrianDragan]

Hi. I'm sorry but I haven't seen dedicated 308/408 units to be mounted instead of the screen on the dashboard.

[@28102650]

I haven't started doing anything yet. I haven't even ordered anything as I'm still at the research stage. My first question is what year model Peugeot 3008 are you demonstrating this on, please? Then you showed having the Bluetooth module permanently powered. What would be the benefit of doing that? And finally, the display screen on my 3008 seems to have only 3 columns for displaying information. If I'm going to add Bluetooth, wouldn't I need an extra column (or something else) in order to configure the Bluetooth connection? If not, why not? Thanks for any help you can provide.

[@AdrianDragan]

Hello. 1. The car I made the video on is a 2008 Peugeot 308. 2. There is no advantage. You can power the bluetooth module from the wire of the radio unit that has + ACC (conditional on turning on the ignition) or you can power it from the + of the illuminated glove box lamp. 3. You just have to configure the radio (using Diagbox Peugeot diagnosis) to accept Aux IN audio.

[@blablabla4606]

Thank you Adrian very good video I installed Bluetooth

[@danielhalachev4714]

Cool. Does this module support next/previous song and play/pause from the radio or steering wheel buttons?

[@AdrianDragan]

Hello. You can only change the song from your phone.

[@andresurena-es]

Hi there! Thanks for your generosity, what is the software and cable your using?

[@AdrianDragan]

Hello. The software is called Diagbox and it only works together with the dedicated OBD module. You can buy the set here, it contains software and the OBD module: s.click.aliexpress.com/e/_DDoo8O5

[@gogokitanovski9679]

Hi Adrian, great video. Is there any way to activate the aux channel without the diagbox? I connected it but it doesnt show up on the radio as an option. Cheers

[@AdrianDragan]

Hello. So far I have only activated using the original Diagbox diagnosis. So I can't confirm that it works with other diagnoses.

[@lucasesteban23]

hello!! good video, I wanted to know if that module has a microphone for when you answer calls?

[@AdrianDragan]

Hi. This is module with microphone for calls : s.click.aliexpress.com/e/_dUYqCGe

[@YS_Production]

Hi. Couldn't you leave the original AUX cable connected and set this bluetooth device as AUX 2 in the diag box? Or is it not possible to have 2 AUX ins with RD4? Thanks!

[@AdrianDragan]

Hello. You can enable both Aux ports, but the bluetooth module pins are set to Aux 1 only.

[@rooli3]

Great video, Question i have a citroen c6 from 2007. is it possible to install this on my radio? and which parts do i have order? thx

[@AdrianDragan]

Hello. Do you have the same type of radio? If you have the same kind of radio, you can install and I recommend this bluetooth module: s.click.aliexpress.com/e/_DFOLxuR

[@RawbLV]

If the radio unit is disconnected, won't it ask for code upon starting? Cause I don't have the code.

[@AdrianDragan]

Hello. If you disconnect the radio, you will not need the code when reconnecting.

[@salvofollas3868]

Hello, thank you for the great video! You think that diagbox software works with the new OBD2 BT diagnostic tool? These costs half than lexia tool. Thank you in Advance

[@AdrianDragan]

Hello. I haven't tried but I don't think it works.

[@mynorprods5719]

@@AdrianDragan Hi man, good video. Just a question, you connect the laptop to the car with the cable of the lik of aliexpress? with usb or how? Thanks and continue like that !

[@AdrianDragan]

@@mynorprods5719 Hello. You need the Hardware / Software interface like the one in the link below + a laptop with the Diagbox software installed. From this link I recommend "Full Chip no clip" version. www.aliexpress.com/item/4000077945226.html?aff_platform=shareComponent-detail&sk=_AKl6lb&aff_trace_key=6237b4f47f354636a3dd3dbef761ffd2-1607978748639-00237-_AKl6lb&terminal_id=d92441f0a7b94ef29dcdfc816a4dd068&tmLog=new_Detail

[@luisr9532]

Hola Adrián muy buen video una consulta ése módulo bluetooth sera compatible con radio Siemens vdo rcd4 12-30 que viene en mi citroen c4 sedan diésel saludos desde Chile

[@AdrianDragan]

Hola. Sí, es compatible con su radio. Saludos desde Rumania :)

[@Omega900]

I know this is an old video now, but in my case there is only one out of the 4 speakers that is working with this.. otherwise on radio/cd everything is fine .. any clues, tips or ideas ?

[@AdrianDragan]

Hello. The Bluetooth module transmits on left / right stereo channels, so not independently on each channel. It is possible that the bluetooth audio signal send to you radio only one channel (left or right) and that your car has a defective speaker on a certain part. Check from the radio menu, fade and balance each individual speaker.

[@debras.2211]

Hi,Adrian. Can i install bluetooth and aux and include both in the diagnostics. Because it seems to me that they have two connectors

[@AdrianDragan]

Hello. I haven't tried to install both at the same time, but I think this can be done.

[@debras.2211]

@@AdrianDragan Thanks for answer.

[@cedriccaro5214]

Hi, thx a lot for this tutorial. Just a question, the module turn off when you turn off the car ? Because when I turn off the car, my smartphone still connected to the bluetooth module and I don't want any problem with my car battery.

[@cedriccaro5214]

Ok, I fix it. On my Citroën C4 2007rd4 .. pin 11 and not pin 12 for the red wire (+) , because bt module is directly connected on the car battery , pin 11 is 12v too but working only when rd4 turn on.

[@AdrianDragan]

Hello. Yes, one of the two wires can be controlled by ignition.

[@DannyK.-yy5oq]

I did it as in your vid in my 207cc. Unfortunately the tacholights are off now. Has that something to do with the auxconnector?

[@schanet1232]

Oui, vérifier les fusibles

[@AdrianDragan]

Hello. I don't know if it has anything to do with it, but it would be good to check the fuses.

[@nikitaradionov6644]

Thanks Adrian for the video. It motivates for installing such module. I have bluetooth in Citroen C4 Picasso 2011 but it is only for calls. If I am not mistaken, the radio is RT6. But I could not find Biurlink Bluetooth module at AliExpress.Do you know if it is possible to install such module in C4 Picasso with RT6?

[@AdrianDragan]

I'm sorry but the plug doesn't fit. At RT6 there is another type of socket and I can't find such a thing on Aliexpress.

[@AdrianDragan]

UPDATE! I researched and the plug fits, you still have to activate with Diagbox the Aux audio input function and it has to work.

[@nikitaradionov6644]

@@AdrianDragan Thanks for the quick reply. I also checked, it seems like the plug is the same (if interested, you may see the image of the plug here - avto-plus.com.ua/ru/car-item/9507309196/). I will try to install the bluetooth. Thank again.

[@homer8ball]

Hello, thanks for your vid!! Now i have mine installed, just to confirm, with this module, when i play music from the music app in my phone, there is no way to skip tracks with the car radio or steering wheel buttons right? Thanks again!

[@AdrianDragan]

Hello. With this bluetooth module you can only change the music from the phone.

[@homer8ball]

@@AdrianDragan thanks for answer, i got a solution for this, u can buy multimedia bluetooth controller for phone that u can attach to the steering wheels so u can change tracks without touching the phone 😉

[@Drake-sl8jd]

Hello, I have a peugot 207 with aux audio source (you can connect trought a RCA wire in glove box) would I still need diagbox to enable it? Thanks

[@AdrianDragan]

Hello. You no longer need AUX activation if you already see AUX when you press the SOURCE button. You can buy a module that connects directly to your RCA jacks: s.click.aliexpress.com/e/_DmJoJlf

[@RenanSCstratocaster]

Question: I'm sad to find out that when using Bluetooth this way to play music, I can't control the phone through the steering wheel controls, the same thing with the radio unit controls. I can only skip /pause etcc, directly on my phone. It's annoying for me because I am frequently changing songs... can I enable the steering wheel to control the Bluetooth device? Context: Due to this video I confirmed that t the previous owner of my Citröen C3 1.1 2011 had already installed this Bluetooth module 😊. I have the stock radio and I want to upgrade it with an aftermarket screentouch unit (single din carplay type screen/radio) so I was messing around and found that module connected. I haven't figured out yet how to install the new touchscreen radio I bought I'll keep using the stock radio for now especially since I found out it has Bluetooth on it.

[@AdrianDragan]

Hello. It is true that using that bluetooth module you cannot skip the songs or adjust the volume on the phone. Have you bought a dedicated Android unit for your car?

[@DJ-np5vp]

Can't thank you enough as I have many tips and info for my car from you. How could connect a computer/laptop to the car? Where I could buy a cable?

[@AdrianDragan]

Hello. You can buy the cable adapter and software from Aliexpress (choose the most expensive, it's the best): www.aliexpress.com/item/4000077945226.html?aff_fcid=3f393039cd76437ca5be168bf88085cb-1621346233730-00705-_AfwDRP&aff_fsk=_AfwDRP&aff_platform=shareComponent-detail&sk=_AfwDRP&aff_trace_key=3f393039cd76437ca5be168bf88085cb-1621346233730-00705-_AfwDRP&terminal_id=364d159dab6d4da48c68657f8054a5c8&tmLog=new_Detail Thanks!

[@dzoni97a]

This mod with mic + Bluetooth sounds amazing, but where will I answer the calls? Only via phone or there is possibility to insert buttons somewhere in the car, like on the steering wheel, or even better somewhere on the radio?

[@AdrianDragan]

Hello. With this bluetooth module you can only answer calls from your phone.

[@dzoni97a]

@@AdrianDragan thanks for the answer! Still way better than talking via phone 😄

[@isaacm1289]

Hey Adrian, good videos. Im currently seeking some answers, maybe you know about this....my bluetooth does not work nor, the multi function display... The display started having the problem where if the cars interior was hot, the letters on the display could not be read... At that point the bluetooth worked... Now, the display is completly black and bluetooth is no longer working.... I guess the screen and bluetooth module depend on each other correct? I ask you this to determine if only replacing the screen would restore also the bluetooth functionality... Im also tempted in buying an aftermarket stereo , dont know what to do! Thanks

[@AdrianDragan]

The first time I think you should replace the screen, obviously it must be programmed for the bluetooth function.

[@isaacm1289]

@@AdrianDragan yes thank you

[@gm5240]

Hello Adrian, great video. However, I'm facing the same issue as others have mentionned. Pin 16 is OK. But I have no pin 11, nor 15. I have a pin 12 but it goes directly to the battery (no ignition). Is there another particular pin to check? C5 X7 2008 RD4 N1 MP3 02 Thanks in advance!

[@AdrianDragan]

Hello. That pin for ACC power is missing on some cars because the radio is turned on via the Can system. You can power the Bluetooth module from the + wire of the lamp in the glove box, extend the cable until there. Usually the lamp in the glove box works together with the ignition on.

[@gm5240]

@@AdrianDragan OK, will check that out. Thanks!

[@ranger7650]

Great video. My 207 has original aux rca cable in glovebox. Can i just unplug that from radio and plug in bluetooth module without diagbox?

[@AdrianDragan]

Hello. 1. You can install a Bluetooth adapter with RCA plugs directly in the RCA plug in the glove box and power it from the lighting lamp in the glove box: s.click.aliexpress.com/e/_DFIZnVP 2. You can install a Bluetooth module with an adapter in the Radio power socket and you will also have a microphone for bluetooth handsfree calls: s.click.aliexpress.com/e/_DFDFV7j If you have already activated the Aux IN function when you press the Source button on your radio, it is no longer necessary to activate it with Diagbox.

[@ranger7650]

@@AdrianDragan thanks, i tried using rca cable to phone but the audio quality was awful. I'll try bluetooth adapter from radio socket

[@Bombka007]

Will bluetooth module will be powered only when ingnition is ON, or also when ignition is OFF but radio is turned ON manually?

[@AdrianDragan]

As I made the connection here, the bluetooth module only works with the ignition ON.

[@felixbott939]

Hello is the step with the Diagbox necessary or will it work with the AUX setting I already got on my 308

[@AdrianDragan]

Hello. If you already have AUX active in the menu when you press the SOURCE button, the Diagbox step is no longer necessary.

[@felixbott939]

@@AdrianDragan thanks for your answer, I only have aux 2 in my menu, would this work too ? And where’s the difference between aux 1 and aux 2

[@rosi57575]

When spliced this way will it work when the ignition is off but the radio is switched on from its power button?

[@AdrianDragan]

Hello. I don't think it will work.

[@rosi57575]

@@AdrianDragan I searched for a wire that gets 12V when only the radio is on but couldn't find one so I did it using the one you showed. Thank you for the great video!

[@adrian4jc]

Hi Adrian, Thank you so much for this video. I can now install Bluetooth in my GC4 Picasso. I would like to ask about Lexia 3, is there an alternative one Incan buy from Amazon. The delivery from Alliexpress is 1 month.

[@AdrianDragan]

Hi. If the seller has good reviews you can also buy from Amazon.

[@adrian4jc]

@@AdrianDragan thanks Adrian. What is the difference on the first 2 links on the descriptions. Plug and your play and the other one is hands free.

[@Fido_Dido1]

I have bought the package @ Ali. Unfortunately my P308 2007 has only a wire at pin12 in the connector. Pin 11 is empty. This means the module will always have power, even when the ignition is turned off. This will drain the battery if you do not use the care for a longer period of tim. ADVICE: If you consider purchasing the device, check if you car audio system used the right connectors first.

[@AdrianDragan]

Hi. You can power the bluetooth module from the positive wire of the lighter.

[@DywanTv]

Hello, I have a question. If my Peugeot 308 has two RCA inputs (left and right side) in glove box and I can see "AUX" option in my source menu is it necessary to use Diagbox after installing bluetooth module just like you did in the video?

[@AdrianDragan]

Hello. Because you already have the AUX IN port active, you no longer need to do the activation with Diagbox.

[@DywanTv]

@@AdrianDragan Thankl you for the fast answer

[@cjatkinson6213]

Hi, if I remove multi changer cd , do I need to activate the aux using diagbox

[@nicolasmacchiavello8201]

Hi Adrián, i installed it following the steps of your video and it works great, only problems with pairing but i downloaded an app and it worked. The only problem is that i connected it to pin 12, because i haven't got a pin 11, and it is always on, taking a lot of battery even though the car enters in eco mode. There is another cable that only allows it when the ignition is on or i have to install a switch or something?

[@AdrianDragan]

Hello. Use a multimeter to find a wire that is powered on the ignition. You can also find a + wire in the light from the glove box that is powered when the ignition is turned on.

[@nicolasmacchiavello8201]

@@AdrianDragan thank you very much i found a cable that works with the ignition on, is from the esp button that my car hasn't got it. I connected it and it shuts off when i turn off the car but it pairs with the phone and then gets disconnected, and then connects and disconnects. Could it be that this cable of the esp button hasn't enough power to keep it working properly or something?

[@AdrianDragan]

I think that cable from ESP has low voltage, I think it is more suitable to supply from a wire of the lamp from the glove box.

[@nicolasmacchiavello8201]

@@AdrianDragan i'm gonna change it! Thank you very much!

[@nicolasmacchiavello8201]

I connected it to the positive glove box light wire and i think it's working fine!, thank you very much for your help and congratulations for your videos, they help a lot!. Regards from Uruguay

[@carcopo]

Hola buenas qué cable has usado y qué programa. Un saludo y gracias por tu vídeo

[@AdrianDragan]

Look here: www.aliexpress.com/item/32815977509.html?pvid=0d5e756a-b7a6-4a3f-9831-64295117c470&aff_platform=shareComponent-detail&sk=_A8pQG1&aff_trace_key=4d1b5bbdd9934dd1a5598745bf9a3b5b-1609965045346-03938-_A8pQG1&rmsg=do_not_replacement&scm=1007.23534.124000.0&terminal_id=d92441f0a7b94ef29dcdfc816a4dd068

[@christophermorris663]

Ive just had one of these bluetooth adapters from ebay, do you have to program the AUX IN for the adapter to work or does it work once its wired in ?? I dont really want to mess or tamper with the diagnostics of my car...

[@AdrianDragan]

Hi. You have to program the Aux IN function with Diagbox, otherwise it will not work.

[@christophermorris663]

@@AdrianDragan But if the AUX IN was already active when I had the car, why do you have to activate it again? I risk doing something to my car if I mess with these kind of settings etc...

[@AdrianDragan]

@@christophermorris663 I probably didn't get it right. If you have already activated the Aux IN function, it is not necessary to activate it again.

[@rredipss]

Hello. Do you have a film about replacing nomade module? Or maybe how to remove center tunnel?

[@AdrianDragan]

Hello. I'm sorry but I don't have a film about replacing nomade bluetooth module. I don't even have a film about how to center tunnel, but I want to do it in the coming weeks. Thanks!

[@rredipss]

@@AdrianDragan I found your film about replacing a bulb in lighter. Some say that i can remove nomade thru this hole :-) i'll check it tommorow :-) thanks for reply

[@AdrianDragan]

@@rredipss That hole is small, I don't think you can get out there but you can try.

[@pan_prezydent]

Hi! let me know that using the Lexia to programming this bluetooth module to correct using with phone is required or not? how to use this one module without Lexia? Should I just switch my radio to AUX and try to use? (Citroen C5 2005)

[@AdrianDragan]

Hello. If you already have the AUX function active in your radio, you no longer have to configure with Lexia / Diagbox.

[@pan_prezydent]

​@@AdrianDragan ok, I just connected BT module and will try to find someone who have Lexia. Thank you!

[@uygar84]

I see in the software there is Auxillary input 1 and Auxillary input 2. Does that mean we can install an aux cable (which you removed) and aux bluetooth (which you connected) at the same time?

[@AdrianDragan]

Theoretically you can also activate AUX IN 2 but the pins are different. Follow the diagram from the link, Part B: diyrepairs4car.blogspot.com/2020/05/peugeot-citroen-rd4-rd43-rd45-wiring.html

[@uygar84]

Adrian Dragan Thank you for the response. Do you know any audio products sold for AUX INPUT 2? (cable or bluetooth)

[@davidbolha]

@@AdrianDragan Hi, What about just having both the BlueTooth as well as the AUX cable connected to the same AUX 1 connector ? 🤔😕 Thanks &... Best Regards,

[@AdrianDragan]

@@davidbolha I don't know if it's good to combine two sound sources on the same cable.

[@AdrianDragan]

@@uygar84 I am sorry but I do not know.

[@camilobecerril2372]

Amigo! La calidad del audio del Módulo bluetooth en comparación con la calidad de audio del reproductor de discos como es? Es igual o mejor?

[@AdrianDragan]

Hello. The sound quality is very good, the sound volume is a bit slower.

[@pawerok882]

Have You tested version with microphone? The same way to install?

[@AdrianDragan]

The installation method is the same, you will have to mount the microphone somewhere.

[@hammerhead9096]

Can you tell me what version of Diagbox you use in the Vid Thanks.

[@AdrianDragan]

Hi. This is an old version v6.19

[@alialnoori3]

Bonjour, tout d'abord merci pour ces vidéos utiles. J'ai une question. Est-ce que cette pièce fonctionne sur Peugeot 308 2009, notez que ma voiture n'a pas de aux

[@AdrianDragan]

Bonjour. Cela fonctionne également sur votre voiture, mais vous devrez activer la fonction Aux IN sur votre radio à l'aide des diagnostics Diagbox comme vous pouvez le voir dans mon clip.

[@alialnoori3]

@@AdrianDragan Merci beaucoup 🌺🌺🌺

[@fokacsbass]

Hi. My RD4 already has the white plug and a black plug as well, but in my glove box there is no aux input. Do you know why ? Should I change the white plug or the black plug in this case? It's Peugeot 807 2008

[@AdrianDragan]

Hello. You have part of the wiring that is connected to the radio jack, but you don't have the RCA jack to connect the AUX IN Audio and probably the function is not activated in the Radio either. You must connect the Bluetooth adapter to one of the sockets in which there is a white or black plug.

[@arthunterns]

Hello, thank you for the video. I cant find this bluetooth adapter for RT5, is it the same as for RT4? 12 PIN? I have A/V connector in glove compartment, but I would preferred this option. Since rt5 bluetooth doesn't allow music streaming. Thank you

[@AdrianDragan]

You can use a bluetooth adapter with RCA jacks and connect to the glovebox sockets. You can supply power from the wires of the glovebox lighting lamp. Link: www.aliexpress.com/item/32821770160.html?aff_platform=shareComponent-detail&sk=_AN7CU1&aff_trace_key=a0e59975e3b54ed08381b019fc531958-1604781963997-09410-_AN7CU1&terminal_id=77944c4ce01745aba668c8702a5739a3&tmLog=new_Detail

[@arthunterns]

@@AdrianDragan thats a great idea, I appreciate it! Do you know, it seems that music is played only on front speakers when I use A/V in glowbox and AUX on RT5.

[@AdrianDragan]

@@arthunterns I haven't heard about this problem yet, I don't know where the problem comes from.

[@arthunterns]

@@AdrianDragan I think I found working solution. I used bluetooth adapter which has 3.5mm output and you can charge it so it doesn't have to be on direct powerline. Put it in glove box connected to A/V there, working like a charm.

[@AdrianDragan]

@@arthunterns Great! :)

[@majdhammid6045]

I have a Peugeot 207 2012 and I really want to install either an AUX input or a Bluetooth connection. I haven’t tried anything yet, but when I click on the ‘’source’’ button Nothing pops up, is that normal? Because if the source button isn’t working and I have to press it in order to use the Bluetooth module, then I won’t bother trying this out. Or is the source button not working because there is currently no other options to be a source other than radio?

[@AdrianDragan]

Hello. The source button does not work because you do not have another audio source. Try to put an audio CD in the radio and see if you can use the Source button to change between Radio and CD. To be able to use the Auxiliary cable or a Bluetooth module, you must activate the AUX IN function in the software. But check if your car has RCA Aux IN audio jacks in the glove box. i.ebayimg.com/images/g/f0EAAOSwFGJcwTZV/s-l1600.jpg

[@majdhammid6045]

@@AdrianDraganI will test the source button with the CD, if it works then I will follow the instructions of this video. Really appreciate the reply thank you!

[@mariusrazvanmatei3878]

Salut! Care diag box ai tu? ca pe link apar 4 feluri, pe care il recomanzi? Mulțumesc

[@AdrianDragan]

Salut! Eu nu am niciuna din acele variante, al meu este stramosul lor are vreo 10 ani :)) Recomand versiunea full chip.

[@petarokovic3880]

Great video thanks. About phone calls, i heard people but they dont heard me. Do you know whats the problem?

[@AdrianDragan]

If you bought the model without a microphone, people will not hear you. When you are connected to this bluetooth module you must deactivate the calls function in the bluetooth menu of the phone, see in my video 7:16 You need this module to work calls: www.aliexpress.com/item/32826594463.html?aff_platform=shareComponent-detail&sk=_9R3eKP&aff_trace_key=69b1471dec82414891bfcd005002377b-1604149301468-01708-_9R3eKP&terminal_id=77944c4ce01745aba668c8702a5739a3&tmLog=new_Detail

[@pgmduno]

Hello. I don't understand the differences betwen the 4 first link in the description. It's 4 items from aliexpress but they are differents ? Complementary ?. I have a citroen C5 2009 without bluetooth and i'd like to put it in. If i buy the first link is it OK ? TY

[@AdrianDragan]

Hello. Hello. Does your car have two red and white RCA plugs in the glove box? Like this: peugeotpartsdirect.co.uk/wp-content/uploads/unnamed-file.MP3.jpg

[@pgmduno]

Hello. No i don't have these@@AdrianDragan

[@pgmduno]

It"s a citroe C5 2009

[@AdrianDragan]

@@pgmduno Hello. This is the right module for your radio: s.click.aliexpress.com/e/_DCFgPAV

[@nikdanial3617]

Nice! Can this bluetooth module can forward/rewind, pause, resume, etc when listening to music using the steering controls?

[@AdrianDragan]

Hello. With this adapter you cannot change the track, forward/rewind, pause or resume from the steering wheel controls.

[@nikdanial3617]

@@AdrianDragan I see. Is there any solution for this problem?

[@AdrianDragan]

@@nikdanial3617 The best solutions I know are to replace your radio unit with an RD45 model or an Android unit dedicated to your car. - RD45 tutorial: kzbin.info/www/bejne/sGanZZ-pgayqjM0 - Android dediated unit: kzbin.info/www/bejne/aqDVfKxsrbiVmaM

[@mariuszluks3191]

you can change the song using the radio or just on the phone display

[@AdrianDragan]

Hi. You can change the song only using the phone.

[@Babaguidai]

Great Video, thank you . But I have a problem with mine, I followed every step in your tutorial, but I don’t have the same color of cable from my cable. So I just connect the black wire of the BT adapter to the cable on pin 16 and the red wire to the one on the pin 11. Did everything right on diagbox, the entry auxiliary number 1 is activated, but when I click on source I get nothing. Can you please help me.

[@Babaguidai]

I can finally see the input aux 1, but no BT to connect on. Seems like the adapter is not powered on, But I did connect on the socket, the adapter black wire to the pin 16 and the red one to the pin 11. What did I do wrong, Please Help

[@AdrianDragan]

@@Babaguidai Hi. Is strange. Try to power the bluetooth module separately from another 12v source. See if after powering it you will find in the list of bluetooth devices in the phone menu.

[@Babaguidai]

Adrian Dragan I will try that then

[@81roleta]

hello thank you for the video, have installed on my 207 but if the volume is on max it disconnects from the phone and keep trying to connect do you have any idea?

[@AdrianDragan]

Hello. I'm sorry but I haven't heard of this problem yet. However, tell the seller about the problem maybe he has an idea.

[@simeonidispantelis]

Adrian hi,my mfd has only 3 icons in menu, there is no bluetooth icon. Can i programm it with diagbox or i must buy a new type c mfd like the one you have in the link bellow?

[@AdrianDragan]

You need to activate the AUX IN option using the Diagbox interface as you see in my clip. The Bluetooth icon will not appear on the screen, so there is no need to change that screen on the dashboard.

[@DywanTv]

Hello. I have another question. I have connected module as shown in the video and radio and screen above the radio is not working. AC, lights etc. is working ok. I have used splicers like yours, but mine were smaller. Is it possible that the splicer completely cut off ground and +12 V? Would it cause screen stop to work? The bluetooth module can be seen in my phone when the ignition is on, but radio and screen dont work. If you could help me I would be very very grateful.

[@AdrianDragan]

Hello. If neither the radio nor the screen works, it is possible that one of the cables is cut.

[@DywanTv]

@@AdrianDragan Hello, it was te fuse fault.

[@Salman-sc8gr]

The original white plug you disconnected,what was its function?

[@AdrianDragan]

That cable was for the Aux audio input, but my car didn't have the complete cable to the glove box, that's where the Aux IN rca audio jacks should have been.

[@koppanyagrillokozmary162]

Hi, I have a 2009 C4 picasso with rneg wipnav with rca aux in. I would like to change the rca aux to a bt like in your video. Do you have a pinout description for rneg wipnav? Does it have the same pinout like the rd4? Thansk

[@AdrianDragan]

Hi. If I'm not mistaken pinout for aux in is identical, you can still use a bluetooth module with RCA connection: www.aliexpress.com/item/32821770160.html?aff_platform=shareComponent-detail&sk=_AN7CU1&aff_trace_key=4b445306f5ff4aedaf24f41b551629cc-1603835577839-07973-_AN7CU1&terminal_id=77944c4ce01745aba668c8702a5739a3&tmLog=new_Detail

[@koppanyagrillokozmary162]

@@AdrianDragan Thank you for your answer. Is the +12V/-12V pinout also the same? :)

[@AdrianDragan]

@@koppanyagrillokozmary162 Yes, but it's good to check.

[@adriangutierrez8634]

hi, i have a citroen ds3 with the radio 'my way rneg' which has bluetooth but it only serves to answer calls. I wanted to install a module like the one in the video to listen to music on this radio, could you help me?

[@AdrianDragan]

You need to check if you have that free plug for connection. If it is free you must also configure with Diagbox for Aux IN.

[@bubel9102]

Hi, i bought the same bluetooth module, but i have a problem to activate aux (I have a citroen C4 2005). I do the same as you in diagbox but when i change a input from missing to convetional diagbox shows me "wrong telecoding". It also shows this for every option to change on the radio. Do you have any idea to solve this problem? Old diagbox version, blocked radio etc.?

[@AdrianDragan]

Hello. I guess it's a radio stuck to changes in the Diagbox, I've also had this problem sometimes without knowing how to solve it.

[@Viktor-jd8ls]

Hi, thx for the video, i have a question, my car didnt have the pin 11 cable , so i conected to the pin 12 ( battery +12v powwered radio) , works but im wondering if will drain my battery ?

[@AdrianDragan]

Hello. For a very long time (say a few weeks in which you do not start the car) can affect the battery. Check with a multimeter the other wires in the radio socket, it is possible to have another wire with positive on ignition.

[@Viktor-jd8ls]

@@AdrianDragan hey, thanks for the tip I will do it.

[@marcinbiesiekierski8431]

great video! In my citroen c4 I have a problem with enabling the aux function in the diagbox. When I select aux1 - convectional and select telecode, I get an error: wrong telecoding. The best thing about my diagbox is that I can make changes in the car, but if I want to change something on the radio, e.g. the continent, the same error pops up. what could be the reason?

[@AdrianDragan]

Hello. Have you tried another version of the Diagbox software? What Diagbox version are you using? There is also the possibility that the ability to code something on multimedia is blocked from the factory.

[@jonahttt]

Have you faced this issue? I am having problem configurating aux1 or aux2.

[@user-jo3lj2bx8m]

So I’ve done everything, great explanation so far. No one locally had the Diagbox and I intend on using it many times in the future, so I ordered one. But what software do I install? They all seem to have a password and I don’t know where i can find it. And after entering the password for the file, will I be met with another authentication?

[@AdrianDragan]

Hello. Did you receive the interface and can't install the software? I think that the seller of the Diagbox interface will give you clear instructions on how to install it.

[@schanet1232]

Quelle tension volt a besoin le module Bluetooth Biurlink svp ? Ford transit 2007 radio 6000 CD

[@AdrianDragan]

Hi. 12 volts.

[@schanet1232]

Merci @@AdrianDragan

[@ngabi1103]

Hi and thanks for the video. I ordered and installed one myself and configured it on a local dealer. One thing it that is happening and I don't really know why. When I turn up the volume (level 30) or the bass (level 9) all the way up it disconnects. It also happened to disconnect and I couldn't even connect to it anymore (it didn't show up) and I had to remove it from the socket and put it back in. Any thoughts on why is this happening?

[@AdrianDragan]

Hello. I have no idea why this is happening, I think it could be a weak thread connection in the mode, but I'm not sure.

[@ngabi1103]

@@AdrianDragan I checked it and there is no thread issue visible. However, I don't mind it that much, but it's inconvenient. Thanks for the response :D