Install Evenflo Revolve Extend

[@amytreager9830]

Your video is so much more comprehensive and more professional than the one from the company. Thank you for all you do!

[@safeintheseat]

Wow, thank you!

[@staci110]

I absolutely agree!

[@djmommymom]

This video was a lifesaver. I was fiddling around w the seat, rotating it for large rear facing baby - but couldn’t get the level-thing to sit in the correct position. I wasn’t even going to go through the trouble installing the base if I couldn’t get that initial safety indicator to work right. Watching this really helped.

[@Dlrart]

The company should be paying you for this video! I almost returned their $470 car seat bc their directions were terrible but after watching your video it was so simple! Thank you!!! New dad and sub here !

[@safeintheseat]

Glad you found this video so you didn't return it!

[@josephkim2842]

Agree! I can't thank you enough!

[@jessicabrewer1530]

They really are!!! So glad I found this too!

[@bettadays1]

1st time dad. Just went out to trade in an old car seat for a newer and bigger one. This video really came in the clutch. Thanks!!

[@safeintheseat]

Glad it helped!

[@james882009]

Thank you, would have had a hard time with this without a clear instruction. Idk how people ever did this with these incredibly confusing booklets in the past

[@safeintheseat]

Thanks for watching! I'm glad the video was helpful to you!

[@nessamitchell439]

This was SUPER helpful! I definitely almost sent this car seat back because we couldn’t find the manual and I couldn’t get the car seat installed. We were LOST until I came across your video. Very straightforward, good lighting, visuals, and you explained it very well. Thank you so much for this!

[@safeintheseat]

I'm glad you found this video, but for future reference, you can find digital copies of the manual online. Here is a copy for you: evenflo-cms-assets.s3.amazonaws.com/manuals/us_gold-revolve360-extend-convertible-car-seat/en/us_gold-revolve360-extend-convertible-car-seat_EN.pdf

[@lryhc]

First time grandparent here and thank you for your clear and concise instructions! I’m one of these people who need visual and this helped so much! Thank you.

[@safeintheseat]

You are so welcome!

[@NicoleMartin-x1l]

it seems like there’s so much extra cushion - just keep it folded so it is flat? thank you and perfect timing as we just got ours on prime day!

[@SherryLandry]

Excellent video. Great host! Instructions were very clear!

[@safeintheseat]

Glad it was helpful!

[@beckyrodstein839]

This video was amazing! Watching the night before we install and feel fully prepared for tomorrow. Thank you for being the best resource out there

[@safeintheseat]

Happy to help!

[@SusanRadolf-o3z]

Very informative video. Thank you very much.

[@safeintheseat]

You are welcome!

[@bizznessify]

First time Dad here. I followed. your very helpful instructions and everything was completed correctly. The base is extremely secure and not moving at all but when we put the seat in it wiggles pretty heavily in the locked position . Is this normal and if so, why do manufacturers make it this way?

[@safeintheseat]

It is normal. Any seat that is attached to a base will wiggle some. The only way to keep it from wiggling is to not have a separate base. The car seats are attached to the base in a way that makes them removable with one squeeze of a handle, so it cannot be too complicated.

[@elizabeth-zharoff]

Thank you for making this excellent resource available! I now know why our seat was rickety.

[@safeintheseat]

I'm glad it was helpful for you!

[@toridaddario764]

We just installed ours yesterday and love it!!! Thankful i read the manual because my husband installed it while i was naptrapped and did not put the top tether strap on at first so I’m happy i double checked 😅

[@safeintheseat]

Glad you love it! It's important to always read the manual, no matter how many car seats you've installed because they all have different rules 🙂

[@kristenarsenault4934]

Getting this seat today! They sent it as a replacement seat.

[@safeintheseat]

I think you will love it!

[@taylorsnyder3329]

Best tutorial on YT! Thanks

[@safeintheseat]

Wow, thanks!

[@ElizabethGresosky]

Hi! Is there a video for how to ensure your child is strapped in properly after successful installation for rear-facing mode?

[@safeintheseat]

Harnessing in this seat rear-facing is the same as the rest of the seats. I have 2 videos: kzbin.info/www/bejne/jaDCfqqkprKfppo and kzbin.info/www/bejne/eqPMd2xrg86DlaM

[@meandlevlogs]

Just bought this car seat! Thank you so much for the information!!

[@safeintheseat]

Glad it was helpful!

[@jaykeilai]

I just got this seat and am thrilled that I don't need to tweak my back to get my kiddo in and out. The base appears to have very little give but the seat itself has a decent amount of wiggle when it's locked into the base - is that normal?

[@safeintheseat]

That is normal!

[@jaykeilai]

@@safeintheseat thanks for the reassurance! I assumed it was by design for shock absorption but it did make me nervous 😅 is this looseness similar in other models of rotating car seats?

[@marissacoronel]

Is there a video or anything show how to get the seat in the proper recline rear facing? My son’s seat indicator ball won’t get in the black zone all the way?

[@safeintheseat]

Evenflo has free video chats for further installation assistance: evenflo.appointlet.com/

[@justicerichards968]

Such a helpful video. Quick question- I am struggling to figure out how/if I can adjust the buckle. It pokes into my son’s thighs and I just can’t figure out how to adjust it. do you have any suggestions?

[@safeintheseat]

The car seat manual shows you how to adjust the buckle. Moving it to the next slot may help.

[@corasproulermt5478]

Creed video, I have a britax one for Life and have been wondering about the seatbelt for a while, the locking with ratcheting is really important! Thank you

[@safeintheseat]

The Britax One4Life seat does not need you to lock the seat belt. The clicktight panel is already locking the seat belt for you

[@NicoleAshley-om7ho]

For optional pillows, are there 3 pieces? Head and 2 body pillows? Or, is it just the top body pillow that can be removed?

[@safeintheseat]

There is a head pillow and a body pillow on this version. Either can be used/removed anytime rear-facing.

[@NicoleAshley-om7ho]

Thank you. The body pillow is 2 pieces of fabric//padding, right?

[@AshleySkelley]

Can you use a towel or upholstery mat under the base to protect the car interior?

[@safeintheseat]

Evenflo allows a single-layered towel or the Evenflo brand mat

[@JoAnna-s2s]

I just got this car seat as a gift. I have the option to exchange it. What are the pros and cons of this seat? Would you recommend this for a first time mom? Or would you recommend something that I can click in and out to carry?

[@safeintheseat]

It's a great option. Easy to install and does fit newborns. We have a full review of this seat here:safeintheseat.com/evenflo-revolve-extend-usa-canada/ AND we have a blog post about whether to use an infant seat or convertible from birth here: safeintheseat.com/infant-car-seat-vs-convertible-car-seat/

[@TRDChampion]

Hi, the link to the review isn’t working it seems. Is there an updated one? Thanks!

[@Arizonayst]

Thank you. So clear to understand

[@safeintheseat]

You are welcome!

[@LoveNeverFails138xox]

My husband’s truck has inflatable seatbelts and we have this car seat. What do I do?

[@safeintheseat]

The middle seat should have a normal seat belt, so you can install it there. Or you can install the seat using the lower anchors until the child is 30 pounds for rear-facing or 35 pounds for forward-facing. Otherwise, you will need a new car seat.

[@imjustalittleghost6359]

I love this car seat and really want it, but I keep hearing the sensor safe buckle is really easy for children to unlatch. Did you find that to be the case?

[@safeintheseat]

It is easy to undo for some kids, yes.

[@nicolesimkins4473]

This was so helpful! Thank you so much!!

[@safeintheseat]

You're so welcome!

[@rainaimaging4818]

hi, this was a great video, I have tried to find the answer to my question on the evelflo site and can tfind it. I have the revolve 360 extend, we recently switched my grandadughater to forward facing, and I had no issues. I took the seat out the other day for some much needed cleaning and I cant get it to go forward facing, and it definetly doen not go 360 now, any ideas on what I did?

[@safeintheseat]

It has to be on a certain recline to turn forward-facing. If that doesn't work, you can do a free video chat with Evenflo: evenflo.appointlet.com/

[@sandramorales2820]

Hi I just got my seat today and installed it the base does not move at all but the seat wiggles a little bit is that normal ?

[@safeintheseat]

Yes!

[@sandramorales2820]

@@safeintheseat Honestly as a first time mom you gave me more piece of mind and I was able to understand your video more than the one from Evenflo 💗

[@Bueller.Bueller.Bueller.]

Such a great video!❤

[@safeintheseat]

Thanks for watching it!

[@Katherine-nq4gx]

What kind of car is this? I love the interior and am shopping for a new car. I just bought the evenflo extend gold and need a car to put it in!😂

[@safeintheseat]

I honestly don't even remember. I was borrowing someone else's vehicle and can't remember whose I borrowed that time lol

[@Katherine-nq4gx]

@@safeintheseat ohhh aww okay!

[@CatherineGault]

My car seat will not rotate all tge wat around. It only goes to the half way points or facing backwards only. Is there something we are doing wrong in order to get it to rotate to forward facing or for it to rotate all the way around? The instructions are hard to understand and nothing from them works. Any help is greatly appreciated.

[@safeintheseat]

Yes, you need to change the recline in order to rotate it fully.

[@dariantoland6284]

Two questions: do you use either the latch anchors or the seatbelt with the tether anchors… or both if you have the option? Second question. The base is secure but the seat seems very wiggly!? Normal? Thank you.❤

[@safeintheseat]

You can install the seat with the lower anchors and top tether OR the seat belt and top tether. Evenflo recommends that you do the seat belt and top tether installation as the lower anchor installation can only be used until the child is 30# for rear-facing or 35# for forward-facing. The seat is a little wiggly; it's normal.

[@chelseasnyder9465]

Thank you, I came here looking for answers on this too! The base is tight but the seat rattles when no one is in it and this seems concerning. Also my son looks super bunched up and almost like the seat forces him into a C position instead of being able to have upright posture.. any recommendations for the padding? We took out the infant inserts, he’s just over two. Wanted to love this seat but so far it hasn’t seemed like a great fit.

[@itsDianneAye]

Such a helpful and informative video- thank you!!! Can you provide more info on the difference and ease of deep cleaning the sensor safe model versus the quick-clean model? Thanks so much!

[@safeintheseat]

It's just a matter of how easy it is to get the cover off. The quick clean cover comes off with a zipper so it's much easier.

[@rachaellavi9252]

We are having a hard time getting the buckle to fit properly on our 12mo 20lb baby in the 360 slim. The crotch straps sit across his thighs instead of at his hip no matter what I’ve tried. Any tips or videos to help us troubleshoot that issue? I can’t find anything online suggesting others have this problem! Thanks!

[@safeintheseat]

The hip straps are fine wherever they fall!

[@samanthalawrence9806]

Thank you! Can this go in the middle of the back seat?

[@safeintheseat]

If you can get a tight installation there

[@WaelKdouh]

Amazing video. Exactly what I needed.

[@safeintheseat]

Glad it helped! Thanks for watching!

[@ladominicanprincess]

The best video to install it❤❤❤❤ love it

[@safeintheseat]

Thanks for watching!

[@ashleykorthals7111]

How many recline positions does it have rear facing. I feel like I only have two and the black ball isn’t perfectly in either section.

[@safeintheseat]

It has 4 recline options for rear-facing. If you have trouble getting it into one of the zones, you can contact Evenflo for a free video chat. evenflo.appointlet.com/

[@dalee_hallmark]

Hello! For the smaller head pillow, is there a certain age or size requirement to remove it? Or is it optional always?

[@safeintheseat]

Optional always. We always remove the head pillow, even for newborns. It tends to just push the head forward

[@melaniearagon2508]

Hi, thank you for providing us with such an informational video! I’m currently in search for a swivel seat and stuck between this seat and the Graco turn2me. Do you (or any viewer that owns) know by any chance if this would fit next to a Graco snug ride 35LX? Thank you again in advance!

[@safeintheseat]

The Graco Turn2Me is 1" narrower than this one. But usually, if you have a swivel seat next to another seat, the swivel function is unusable because it needs space to turn.

[@melaniearagon2508]

Thank you so much for your reply, I will keep this in mind :)

[@KelseyHamrick-n7k]

We have the same car and car seat. We are wanting to install it in the middle back seat but we can’t find how the tether attaches for the middle seat. Do you happen to know?

[@safeintheseat]

It's in your vehicle owner's manual. This is not my car, I was just borrowing it for filming

[@sineadrousseau9123]

We have an older model car and the seatbelts do not lock. So I must use a locking clip correct? Where does that go?

[@safeintheseat]

I have a video of how to use a locking clip. Make sure you get the locking clip from the manufacturer. They will send you one for free. Most of the ones on Amazon are fakes and will not hold up in a crash. kzbin.info/www/bejne/kJm9hXd4Z7J-l5Y&pp=ygUdbG9ja2luZyBjbGlwIHNhZmUgaW4gdGhlIHNlYXQ%3D

[@eparts5054]

My base is tight and secure, but the shell seems quite wobbly..is this normal?

[@safeintheseat]

Yep!

[@JacobSeelinger]

After installing the base an it being super tight and not moving we installed the seat it self but it seems a bit wobbly when locked in place is that normal

[@safeintheseat]

Yes

[@AllisonEnterline]

Hi Michelle, if my 35 lb 2.5 year old’s head is less than 1 inch from the top of this car seat with the shoulder straps at the shoulder, do I have to turn her forward facing? I bought the extend hoping to stay rear facing as long as possible. Thanks!!

[@safeintheseat]

You should still have plenty of room. Play with the insert in or out and adjusting straps that way

[@lizpolomsky9484]

When i rotate my seat and it is successfully in the “lock” position and green, it still moves a tiny bit side to side. Is this normal and happens to yours too? As long as it’s green I should be ok right?

[@safeintheseat]

It's normal. As long as it's green, it's good

[@emimaccabe6377]

We have this seat and love it! This is a great video to help with install ❤

[@safeintheseat]

Glad it was helpful!

[@jessicafrc91]

After installation, it feels the car seat is not secure. If I move it with my hands, meaning, push it, it moves. Not sure how secure is this 360 rotational thing with the base

[@safeintheseat]

Only check where the seat belt is coming through. As long as it doesn't move more than 1", it is installed tightly. It will move everywhere else.

[@ErinBornemann]

Help!!! I drive a 2024 Pilot. The seat belts have that section of “extra material” and for the life of me, I cannot seem to position it in a way that is out of the way of the locking arm. I’ve scooted the base both right and left and it’s still in the way. What can I do?

[@safeintheseat]

If you have already tried moving the base each way to get that part of the seat belt out of the locking arm, the seat may be incompatible with the vehicle.

[@ErinBornemann]

@@safeintheseat bummer. That’s what I was afraid of. Can the extra material be anywhere within the belt path? I know it can’t be in the two sections where either side of the arms come down, but what about on either sides of the arms?

[@almakeuppp4186]

Is it always necessary to use the tether? I want to use 2 of these toguether in a new suv but 1 in the middle and the seat doesn’t have this thing to lock it

[@safeintheseat]

Yes, it is required. You'll need to move it to a different seating position that has a top tether anchor.

[@cherieallgeier8561]

This was very helpful! Thank you!!!

[@safeintheseat]

Glad it was helpful! Thanks for watching!

[@apendol1]

So you are using the top tether anchor but not additional lower anchors, correct? Just routing the seat belt through the belt path?

[@safeintheseat]

Correct. Vehicle seat belt through the belt path and then too tether connected to designated spot

[@datskira]

I’d like to buy this car seat, but how do I measure the backseat of my car to know if it’ll fit?

[@safeintheseat]

You can't really. The depth varies by vehicle seat as they have different slopes

[@ksaifiwalid9915]

Hi. Thanks for this. I wasn’t able to get the black ball in the black zone as my daughter is 12 kg. It’s at the end of the black zone and already at start of white zone. Any advice ?

[@safeintheseat]

You can contact Evenflo and ask if it's ok to use the white zone

[@DanG-iy1op]

Appreciate your videos! How do you think this would fit behind a 5’8” driver in an Audi Q5? With our Nuna Pipa Lite RX, we have to put it behind the passenger seat since it forces the driver’s seat up so much. Also, do you notice any difference in fabric comfort between the green FR free and the regular fabric of the gold models?

[@safeintheseat]

Thanks for watching! If the Nuna Pipa Lite RX doesn't fit behind the driver, then this seat won't fit either. If you want a swivel seat, Nuna Revv and Graco Turn2Me are the most compact front to back

[@DanG-iy1op]

@@safeintheseat Thank you so much for the quick reply! Understood. This seat is just so feature rich we may stick it behind the passenger seat again. Do you know if there’s any difference in fabric comfort/quality between the FR-free and regular fabric (non quick wash)?

[@themancalledceo]

Great video

[@safeintheseat]

Thanks for watching!

[@MariaGutierrez-fg2vu]

I just got this seat yesterday and was planning to install over the weekend but with this video I might try today. Can you install this in the center seat?

[@safeintheseat]

If your middle seat is wide enough, then you might be able to.

[@oliviaemer5405]

When we install the base, there is less than one inch of movement when we test it. However once we add the seat, it feels like it’s moving back and forth a lot more than an inch when we shake it. Is that normal?

[@safeintheseat]

Yes this is normal

[@marianafarris3786]

Is this the only rotating car seat you recommend?

[@safeintheseat]

Nope! You can find all of our recommended seats here: safeintheseat.com/sits-recommended-car-seats/

[@maudepoitras8066]

Hi ! Does this car seat fits in a Tesla model 3? Thank you!

[@safeintheseat]

It does not work forward-facing due to the non-removable forward tilting headrests. Check out our list of seats here and look for one that says it works well with non-removable headrests like Nuna Rava for example: safeintheseat.com/sits-recommended-car-seats/

[@rachemarts6899]

Is there a huge difference safety wise between this and the new slim version? I just purchased the slim version due to the size of my car. I can’t find any solid safety info on the slim.

[@safeintheseat]

They both passed the same crash test and the results are not released so it's impossible to compare how they did.

[@lynseyanthony1593]

Do I use both the seat belt and lower anchor or just 1 or the other? In my case, I will use seat belt. Thank you

[@safeintheseat]

You can only use one or the other, but with this seat Evenflo recommend that you use the seat belt.

[@lynseyanthony1593]

Thank you so much!

[@cassandragonzalez1168]

Is there a safety reason for this? I have the regular revolve and i have been using both anchor and seatbelt to ensure that thing doesn’t move

[@lsatt985]

We are trying to get the right recline angle for our baby who is over 20lbs but when we recline the car seat each way, the ball still won’t reach the black indicator mark. How can I fix this?

[@safeintheseat]

You can contact Evenflo for a free video chat, they can assist.

[@six16th]

Are the rotating car seats good for the middle seat in particular?

[@safeintheseat]

It depends on the vehicle, some vehicles have super narrow seats and none of them are going to work well there.

[@Diamon5]

I wanna rear face for as long as possible my child is about 23 pounds going on 3 would it be worth getting. I have a Britax click tight currently and I so haven’t enjoy it

[@safeintheseat]

It has 50#/48" limits for rear-facing so it would last for many years

[@sarahsanger6234]

Looking to get this car for my daughter based on your car seat buying kit! 🩷 The original Evenflo gold 360 revolve (not extend) has had terrible reviews of the crotch buckle bruising children and digging into them. I am wondering how these buckle areas differ? And why you may recommend the extend?

[@psycho.710]

I just saw a video that your can extend the crotch piece so its not as tight, it just doesn't explain it well in the manual. Extend allows you to keep your child rear facing (recommended for as long as possible) for 10 extra lbs, 40 lbs vs 50 lbs.

[@safeintheseat]

When used correctly, this seat will not cause bruising. Many people do not have their crotch buckle used properly

[@romualdochavez9672]

How do I get the recline position further into the black zone? The black ball only goes right in the middle for me

[@safeintheseat]

If you have tried all of the recline positions, that's as far as you can get it.

[@BloodRedeemed]

Does this also use the LATCH system, and can you use both LATCH and the seatbelt?

[@safeintheseat]

You cannot use the lower anchors and the seat belt at the same time. The preferred installation method is the seat belt with the top tether anchor

[@BloodRedeemed]

@@safeintheseatthank you for the reply! I thought to myself, “why would the seatbelt be recommended over LATCH”, and so I looked it up and found that the LATCH system has a recommended weight limit of 65 pounds total. I had no idea! Thank you thank you for sharing the manufacturer’s recommendations!

[@adelinagalev9513]

Hello, I just got mine and I know it’s supposed to have a quick clean zipper cover but I cannot find a zipper anywhere!! Can you help with this or show me where it could be

[@safeintheseat]

The version in this video does not have the Quick Clean Cover. If yours has it, there will be a tag on each side of the upper portion of the seat that is black with an orange image. The zipper will be near that tag.

[@caitlinchristian4781]

Is there a weight limit for when they grow out of the seat and head cushion? How do you know when to remove those?

[@safeintheseat]

We remove the head insert immediately, even for newborns. You can remove the bottom cushion whenever you want

[@jescelyn05]

Very helpful!

[@safeintheseat]

Glad you think so!

[@catherinecarroll7155]

Even if you have a lock off, do you lock the shoulder belt if you have a locking retractor? I have the Graco Triogrow, and the seat is tight and not moving an inch, but the shoulder belt isn’t locked with the retractor, just with the locking arm.

[@charlenedutra1549]

If your shoulder bet doesn’t have the lock feature (like in cars built before 1996), then I don’t think it’s necessary , but when in doubt, check your manual! If the car seat base doesn’t move more than 1in in any direction, then it should be fine

[@safeintheseat]

The Triogrow does not require you to lock the seat belt. The Revolve does require you to lock it.

[@joshuacarroll8409]

How do you adjust the recline to be most upright for forward facing when it has to be most reclined to rotate?

[@safeintheseat]

You have to change to a different recline to rotate it and then choose whichever recline you want the child to ride in when you have it back in position

[@marielaesparza1774]

Did you also put lower anchors as well on the car seat aside from the seat belt and anchor in the back of the veichle seat ?

[@annematthews9235]

No. Never use both :)

[@safeintheseat]

Nope, just the seat belt and the top tether (preferred method) OR the lower anchors and the top tether.

[@britt10394]

I’ve always locked the seatbelt and tightened before closing the lock. Is it mandatory to lock the seatbelt after instead?

[@safeintheseat]

I wouldn't say mandatory. As long as you get a tight installation and the seat belt is locked, that is fine

[@shay_butter_baby]

I'm looking at this seat for our next one. My husband is 5'11 and I'm 5'4. Would this work in our 2019 Rav4?

[@safeintheseat]

If it's behind you, it would probably be fine.

[@alissabritto6140]

What would you consider as too tall for front seat passengers? Dad is 6 feet and I’m 5’8”. That’s the only thing making me nervous about this seat

[@safeintheseat]

Would depend on the vehicle. If you have a small car like a Corolla, this would not be a good choice. If you have a mid-size car/suv or larger, it's likely ok behind you

[@jordansharp767]

I just installed this seat. Once I set the seat on the base and lock it, the seat still wiggles. It doesn't unlock but I think it moves a lot, is it supposed to be wiggly??

[@safeintheseat]

As long as the base doesn't move more than 1" at the belt path and the seat is locked in, it's good. Lots of seats are wiggly

[@awhite2786]

My car manual says a rear facing car seat can only be installed using the lower latch and the top tethers are only used for a forward facing car seat. Am i unable to use this in rear facing mode?

[@safeintheseat]

Most vehicle manuals aren't going to show the use of top tethers with rear-facing seats because it's still very uncommon in the US. But it's allowed

[@sww5076]

Hi Michelle! Any idea why I can get a green lock indicator in FF without my kid in the seat, but once I put him in, it never turns green when I swivel him to FF position?? I’m lost! It’s been great and no issue when he was RF all this time.

[@safeintheseat]

I'm not sure. You can contact Evenflo for assistance.

[@CoachAdamYouhanna]

Is it normal that the car seat wiggles a lot when on the base?

[@HiiiRabbit206]

That's what I've been trying to figure out

[@safeintheseat]

It is going to wiggle a bit. Just make sure that indicator is green and you keep it in locked position and you’re good to go!

[@catherinecarroll7155]

Does this seat lock in the position facing you when trying to put your kid in the seat or does it wiggle around as your kid gets in?

[@safeintheseat]

It doesn't wiggle around

[@DiamoniqueWilliamson]

Hello thank you for your review on the seat i am stuck betwwen the revolve360 green & gentle and the nana rava i only have one child that is 25 pounds and 2'11. I do want more children in the future. do you or any viewers have or ever had both to compare?

[@safeintheseat]

Thanks for watching! Both are easy to install. The Revolve Extend has a much taller harness height, so if the child is very tall, go with that one. But if you have a vehicle with non-removable headrests, the Nuna Rava is better in that instance. Nuna Rava is also more compact front to back if that's a consideration

[@MelissaMckinsey-sh6xp]

Do I have to use the back anchor latch for rear facing in the advocate vehicle is a dodge ram 2014. If so, how do I use the back anchor seatbelt is in the little pouch behind the address

[@safeintheseat]

If you are using this Evenflo Revolve car seat, you must use the top tether, even when rear-facing. You can look in the Dodge Ram owner's manual for instructions on how to do it.

[@kristatering3480]

How do I move the crotch buckle to the furthest setting? I think I did it right but I just can't believe how short it is? I just don't see how my son (13mo) can grow with this seat when he's already at the furthest setting.

[@safeintheseat]

A 13-month-old should not need the furthest setting. There is a picture in the manual that shows you how to move the crotch buckle.

[@kimberlysymonds7517]

What are the differences between the different models of the Revolve beside the rear facing weight you mentioned for this seat

[@safeintheseat]

I'm working on some videos right now about the differences. The slim version is slightly more than 2" narrower and doesn't have a high back mode. It still has the 50#/48" rear-facing limit.

[@carlosflores85]

I’m curious why the LATCH system is not recommended?

[@safeintheseat]

If you install with the lower anchors, you can only use the seat until 30 pounds rear-facing and 35 pounds forward-facing. If you install with the seat belt, you can install it once and use it in both rear and forward-facing modes without having to reinstall the seat.

[@dominguezjessica1]

Could you do a comparison between the revolve gold and the slim version? Or are they both the same? I am between the gold revolve or the slim version, thank you in advance

[@safeintheseat]

The slim is 16.7" wide and does not have a high back booster mode, otherwise the same

[@shannonbuchanan4396]

How do you remove the buckle to extend outward so that my granddaughter can fit into the seat it’s set at the newborn stage and I’d like to do it for the toddler stage. I think it’s called the crotch buckle.

[@safeintheseat]

You can find a diagram in the car seat's manual about how to do that. It's easy for this seat!

[@nateho1704]

Thank you!!

[@safeintheseat]

Thanks for watching!

[@kenzienadine5797]

i have the regular evenflo extend, not the gold, is the install going to be any different?

[@safeintheseat]

The installation for all models of the Revolve is exactly the same

[@VS-wb1mt]

Thank you!!!

[@safeintheseat]

Thanks for watching@

[@MissKathyG]

Just switched from the original 360 to the 360 Slim… I wish I gotten that one. All are great seats though

[@safeintheseat]

Both are great options for sure

[@VS-wb1mt]

My head rest does not lift is it safe placing over the head rest?

[@safeintheseat]

You may find it difficult to swivel the seat with a non-removable non-adjustable vehicle headrest

[@emilyhall3870]

Thank you so much! This is the seat I’ve been looking at for our next one. I have a long torso child so it makes sense. We are also tall so it would have to work with our vehicles since that is one of the cons. Is there a place where we can install them in our car before purchasing? Have you thought about offering that service with all your extra car seats? Local to Tampa. 😁

[@safeintheseat]

There's nowhere you can do that except possibly Buy Buy Baby, but they are going out of business. I'm a single mom, I really don't have time to open up a side business like that.

[@rhiannonluck67]

We have a locally owned baby & kids store with CPST’s in Houston that doesn’t car seat consults. May be worth looking to see if you have one somewhere locally?

[@ashleighmelchior1443]

The instructions made no sense , this helped so much thank you !!

[@safeintheseat]

Glad it helped!

[@vanessa94boymomma]

Can you use both latch and car lap belt??

[@safeintheseat]

You can install it with the seat belt and the top tether OR with the lower anchors and top tether. Evenflo prefers that you use the seat belt and top tether. It's easier to install that way.