Install (FAKE) Faux Stone Panels: EXTERIOR . . . SAVE MONEY - AMAZING RESULTS!

Created by: twHomeShow.com --SEE MORE HERE!
VIEW MORE Related Videos Here: goo.gl/qCigfe
EXTERIOR HOME Make Over with FAUX STONE PANELS!
In this Project/Video I'll show you how you can improve the appearance of your house exterior just by ADDING Faux Stone Panels.
This is the Stone Product I Picked: Wellington Dry Stack Faux Panels COLOR: Quarry Gray
This FAUX STONE Panel Project cost me: $614 (and Took 2 DAYS!)
It makes a great difference to the way your house appearance is "richer looking". It looks like REAL Stone has been added! VERY Affordable and ADDS Lot's of value to your home!
What I really like about this Product/Project, is how your accuracy doesn't have to be that perfect as long as you have the Paintable Caulking and Touch-Up Paint kit!
If I were to use REAL Stone and hire a company to install this improvement, I would have probably had to pay $2,000 to $3,500.
________________________________________
USE Faux Stone Panels INSIDE Your Home (see this video): • Faux Stone Panels: KIT...
________________________________________
BUY THE STUFF YOU'LL NEED HERE, I'll leave the links below
Faux Stone Panels: www.fauxpanels.com
DAP Paintable CLEAR Caulk: amzn.to/2y0ji0E
RYOBI Cordless Circular Saw: amzn.to/2xVuKsL
RYOBI Cordless Drill with Battery: amzn.to/2fSKjNf
48" T-Square: amzn.to/2xU7T0D
TAPCON/Concrete Screws (2 1/4"): amzn.to/2ypsblI
Tape Measure: amzn.to/2xU8Fe3
**HIGHLY RECOMMENDED FOR ANY HOME**
Compact/Portable Work Table w/Clamps: amzn.to/2yZrGMc
_______________________________________________________
My MERCH is available here: twHomeShow.com
Become a Patron: / twhomeshow

[@cooper8318]

You got a lot of hate in the comment section here! For the $500 he spent, hes adding way more than that in value no questions about it. If you dont like this product then there are always more expensive products out there that you can buy. I say thanks for putting this out there as an option and nice vette by the way

[@DaMalat]

It's interesting when you go onto the profile of most of these trolls. They have either posted a couple of videos some years ago on KZbin and given up as it's too much work for them or they haven't ever contributed to the KZbin community. I'm all for constructive comments (how else can we learn) but the haters contribute nothing.

[@awesometaxes]

I say thank you too, I'm going to add this to my house too.

[@lzh3131]

I think it looks great! I’ve looked into several other similar products, put the cost out of reach. Thanks for the video & product information. Don’t let the haters keep you from sharing your alternative and budget friendly ideas.

[@josuagaro6362]

Really nice job man.

[@Julia-Julia]

He had added absolutely NO value! He messed it up! If I had bought that house from him! I would remove that ugliness right away, and had it redone!

[@PrayerOpensDoor]

Excellent job with a great visual improvement to your beautiful home.Great job on filling and touch up job as well.

[@andrewegorho2455]

You should have showed us how you used the tap gun concrete screws.Did you cut out panels first and laid it over the area and mark out where the screw has to go? Or did you just drill over panel into concrete and came back to insert the screw. Please, teach me how you did it. I love the outcome of your work.

[@shanebishop4978]

My home is 100 years old. I have been calculating and experimenting with various siding themes. I have had stone or brick in mind from the start. I have a definite design now. Thank you. This product fits my budget and seems within my abilities to install. My home is rather simple in design in comparison with yours. The wood 4"T1-11 4×8 siding installed horizontally with this Faux TandoStone panel as a base will bring my old home to life. Simple trim and a panel separator mold will be very nice. You have helped me greatly with your posting. Thank you very much. C/O in Oklahoma

[@Jcombetta]

Thanks for the video it looks great. Could faux corners be used as well?

[@beautyluvpeace3264]

Glad I ran across your channel... I was wondering how I can get that stone look around the lower part of my house now I see. Thanks for sharing your video also I think it turned out nice

[@twHomeShow]

beauty luv, thank you so much for the nice compliment! I hope to hear from you again :)

[@beautyluvpeace3264]

tw HomeShow you're very welcome.. keep up good work and great ideas.. this video really helped me out...

[@carol3282]

@@twHomeShow I do not see where you purchased them. Thank you! Great Job!

[@twHomeShow]

@@carol3282 www.fauxpanels.com

[@wesalmeidarestorations8128]

I've been thinking about doing this to a few of my exterior walls of my house, for looks and for a little bit of extra R value with insulation on top of my wood siding. Good job.

[@praiselifeworshiplife1ca]

Looks good .I was thinking of covering some brick I have on the front of my house with slate vaneer sheets but this is a cool alternate option.

[@awesometaxes]

You just added even more value to your home. I love it, how could I add the panel dividers that are above the stone?

[@eastcoastbrushworks6327]

I’m curious if you had to trim off the top ship-lap edge to fit under the moulding on the house.

[@dancyr6728]

Looks good just wondering how this will work in the north with snow and frost and 50 below zero

[@laadoptada8246]

Hey man how has this been holding up? You should do an update video

[@carolaugustin5542]

This is a project I could tackle to add 'flair' to our house

[@debfranke4303]

Very helpful! However, I was really looking for how to attach the panels to the wall. I'll continue to search your videos. Ty

[@viking8781]

It says in the video 2" tapcon screws but i would add adhesive also

[@trishaeason8081]

Why is the rest of the siding made of? Is it really cement? Is it some sort of smooth finish stucco, or something else?

[@gigatech4664]

Quick question, not necessarily relating to this project, but what paint color is your house and the trim around? Its very appealing to the eye, and the faux block brings it all together.

[@fall06safari]

Late to the video but thank you. I want to do the same to my house to add character, but im not sure if it would look right. I have brick and it would protrude out.

[@explorer909]

8:30 - As long as the caulk is paintable, it looks to me like it really doesn't matter if it's clear or not. In fact, I think it would be best if the caulk remained white after it dries. This would make it easier to know where to apply the touch-up paint.

[@wiso2010]

Where you buy the stone siding?

[@professionalultimatepainti1009]

This is beautiful!

[@robbiesingh3012]

where can I purchase the fake faux panels from? can anyone help with the store or website?

[@mbacdc]

looks great. excellent video. you make it look easy. thx!

[@momeesan]

That looks ABSOLUTELY BEAUTIFUL...thanks for uploading this, it is inspiring!

[@acman0926]

You did a nice job. I feel like its incomplete without doing behind the hoses and filters. But it's not my house lol. Much cheaper than real stone and hiring a contractor. I'm betting you learned a couple tricks that will make finishing all the way around the house a breeze. Maybe leave out the clay colored touch up, or lighten it up with some of the cream color, it seems to be too dark for that type. But nice job, hoping mine makes our house curb appeal better. Youve got a beautiful house. P.s. your garage is WAY too clean.

[@twHomeShow]

Charles...Love your comment and wish you the best of luck with your project. Thank you very much :) Todd P.S. and thank you for LIKING my comment to the "Professional Stone Layer" :)

[@meedily]

What did you use for flashing underneath the molding? Or did you just caulk it?

[@twHomeShow]

I just caulked to keep the moisture from gathering behind.

[@kathryntorres8747]

That turned out beautiful

[@Sam-tg4ii]

If I want to cement stone directly to a brick exterior wall, do I need any moisture barrier between the stone and brick?

[@marlboromatt5656]

No!!

[@p1pepper]

Nice , planning on doing the same . I have stucco sides as well . 2 things - unless I skipped through it , didn't see how you attached the panels ? Also , hard to hear you talking as music volume was loud . Still 👍

[@dovemcelfish9569]

That was my question how did he attach them to the walls? You know the most important piece to the project and all.

[@ItsKyle95]

I have a similar project that I'm working on, but it would be installed on top of brick. Do I need a vapor barrier ? Anything I should watch out for ?

[@marlboromatt5656]

30 year brick , Stone , block mason . The answer is No

[@lzh3131]

@@marlboromatt5656I had the same question. I want to cover my foundation on my brick house.😊

[@ruger3089]

Great video !! Thanks for the help

[@marcelinogonzalez967]

Where did you buy the panels? You never mentioned it. Nice

[@MrVitalikriuchkov]

How do you install them the process??? Drilling holes for top Gans etc How you install panels over stucco??

[@wandahall8496]

Size of panels and where did you get them. They look great

[@baeyani9996]

What song/mix are you using? (“I’m sorry for all the pain”) Awesome upgrade !

[@bulletproofpepper2]

Wow, it dries much lighter looks very nice. It adds so much depth to the lower half. Before you started I didn’t think you needed it and then you added the faux stone panels, two thumbs up from me!!! Thanks for sharing. I’m going to get some.

[@twHomeShow]

Thank you! -Todd

[@SSS-eq3ky]

How much do each panel cost ?

[@mordysalem1498]

Great job my man, it looks great!

[@divadivine5598]

I don't see the link I'm trying to get the stone look dirt cheap please send me a link asap

[@SSS-eq3ky]

Hey can you put this up on a trailer - how much weight is it per panel. Thanks !!!

[@juniororejel894]

Looks fantastic Amigo 👍👍

[@nakishaanderson612]

Where did u get these panels . It's beautiful u did a wonderful job 👏

[@paulrevere4326]

What type of saw blade did you use and did you pre drill the holes before installing the screws?

[@twHomeShow]

Standard circular saw blade for wood. Yes, I pre-drilled holes through the product and into the stucco-block with a concrete bit.

[@yayap5631]

I was wondering if you have to remove part of the exterior wall of your house to put this on?

[@twHomeShow]

NO. I just drilled holes with a concrete drill-bit and used countersink Tap-Con screws to screw this over my exterior stucco surface.

[@rudolphwilliams1355]

Looking good where can I get some to buy?

[@steveallen4004]

Was thinking about using these around my basement bar are they pretty durable?

[@twHomeShow]

Yes. They are manufactured to withstand the outdoor weather. Check out the photo gallery for lots of ideas on their website | www.fauxpanels.com/

[@dmaverick2396]

Looks good! Thanks

[@BeautyLifewithLC]

What is the name/style of your specific panel you purchased?

[@barrynoel6908]

Why didn't you use sanded grout and match it with the house that way it looks like it is either mortar or was done originally when the house was built

[@debfranke4303]

Could you please tell me how you attached these panels to the wall? Did you just screw them in? Did you use any type of glue?

[@twHomeShow]

The recommended glue didn't work for me so I drilled holes and attached with concrete screws.

[@BenYamin-os7zl]

Looks great, any way you can share where I can buy the same panels you bought? Thx

[@mccarv50]

Home depot

[@Sleon117]

How much was it all in?

[@Feliciamack1]

Amazing nice job!!

[@norac3503]

omg this looks so good. The caulking with the paint turned out nice. You couldnt even tell. How did you apply the panels into the stucco? We have a stucco home as well here in florida. Did you drill into the stucco?

[@twHomeShow]

Yes and use tapcon screws to attach the panels 😀

[@robturner7853]

@@twHomeShow are the screws painted also?..Tapcons are usually blue...,Filler then paint?🤔fiberglass resin can work pretty well unless its a type of foam board, hope its not foam....condensation between stucco and foam board products with lil to no air gap makes for huge issues like mold, mildew etc

[@freddycarballo4248]

yeah you dont have a link where to buy the panels.

[@ozzymendoza780]

I love the nice touch. I also love the color of your exterior house paint, do you know the name of the color by any chance??

[@mikeakaspike]

This is great and all, but where did you show the way that you stuck them to the wall? Isn't this a howto install? You mentioned adhesive multiple times but I didn't catch watch you used or how. Just a video about cutting to size.

[@twHomeShow]

Mike, You're absolutely right, I "F'd-Up". I originally tried the adhesive that was recommended for these panels and the panels just slid-right off! So I really recommend using screws...in my case concrete screws. You have to drill the hole and screw in the screws - WORKS GREAT and FAST! Look for my other video where I applied this same stone panel....HERE'S A BETTER VIDEO: kzbin.info/www/bejne/pn-phJJnitdsas0

[@mikeakaspike]

@@twHomeShow Awesome, thanks for the link I'll check it out. I've seen other people use screws, but I was wondering if that is the typical or recommended way to install them, and if they look concave or weird if you don't screw them in just right. And the biggest thing on my mind was, how do you deal with the exposed screw? Cover and paint it? leave it because they blend right in from a distance? How did you go about dealing with them? Thanks again.

[@twHomeShow]

@@mikeakaspike I just dabbed them with the touch-up/blending paint that you are supposed to purchase with your stone panels :) Check-out my other video, with the columns I did and you will see how it turns out. Thanks for your comments! Todd

[@felixadams7313]

Great job

[@superultramegamaga4021]

looks good! but did you concider adding one more panel to butt up against the hose?.. that void is glaring.. and the spilled paint makes me angry 😁

[@billhawkins6959]

You didn't show how to put it on the wall. Was the wall concrete? If so did you use tapcon screws?

[@twHomeShow]

Hi Bill. Yes. The wall was stucco/concrete and I used tapcon screws and just touched up the screw-heads with the touch-up paint. - Todd

[@lenaely6146]

Tw Homeshow: *shows total price and time it took for his project+ lists materials* Me: 😍😍😍😍😍👌

[@twHomeShow]

Thank you! -Todd

[@leopardspotsmusic]

Wow, just beautiful!

[@mustanggarland24]

Looks amazing

[@roydi5122]

Where can I buy them at

[@Elin-Esteem84]

How do u attach it to the wall?

[@cooper8318]

tapcon screws

[@javiercarrion2169]

Where can I get it? We are repairing a 94-year-old house.

[@danturley8809]

4:24 Now where the heck did I put that tape measure?

[@outdoorlife9410]

Maybe. But the value is more with real stone not only because the strength but the time and labor and of course the cost. Great job looks great. Beautiful home

[@JosefwitdaCoatOn]

That looks awesome man I have a stucco house and am gonna run with it

[@ssdtrain1]

Huh? you should have removed your hose racks and completed the wall.. looks incomplete don't ya think? Also, those are to be used with adhesive, not just nails.. but looks good..

[@janezagarella676]

totally agree with you and they have special panels for the corners without going through all that work

[@Mr.Revere]

Can I installed on a brick exterior walls.

[@twHomeShow]

Sure!

[@uknodebo3092]

My man got a castle. U should do that whole wall by the faucet

[@angbuzz]

Do you put adhesive to back

[@twHomeShow]

Hello, I tried the adhesive they recommended (even bought the special applicator gun) but the panels would just slide and fall down. The glue sucks!! I used a few blue tapcon screws about 2" long with philips head. Pre-drilled with concrete bit because I was going through stucco and block. That method went very good and quick!

[@dovemcelfish9569]

@@twHomeShow Thank you, for explaining that. It would have been nice to see the application process to complete the video. Any behind the scenes footage that shows the application process?

[@mrdannyverma]

How did you install panels on walls.

[@twHomeShow]

Pre-drilled holes and used concrete screws.

[@billdougherty9325]

Thanks!

[@marytaylor1542]

It gives your home a more elegant look.. I love it Great job!!

[@trishaeason8081]

What is the rest of your home made of? Is this cement, stucco, or something else?

[@twHomeShow]

It's stucco.

[@jamilehkhalili4196]

We wanted to know how did u install on the wall but u didn’t show

[@twHomeShow]

I just drilled holes and used concrete screws to attach the panels :)

[@lupefiasco3159]

I wanted to know the same thing. How did you attach the panels to the wall? Glue, nailed, screwed in?

[@twHomeShow]

I predrilled and used concrete screws into the stucco. I tried glue first, but that was time consuming at didn't hold very good. -Todd

[@Sfk887]

Looks good ..What company did you buy from?

[@johnsteve4850]

For what little you did, why didn't you invest in a couple or 3 corner pieces. Not that bad of a job, but it would have looked allot better. Also an old vinyl table cloth would work good to use to place on the ground to hold your various paints. An you can also use an old cookie pan to place your paints in (again) to stop spilling on our your concrete.

[@jacquelinesannicolas9206]

Nice job and nice car! 😂

[@LUCANDIS]

Thanks for the video I wondered how it was done

[@1kennylo]

Looks good

[@brianmiller2739]

Looks awsome

[@yaeyoeboma]

Not bad at all. How did you set the tapcon screws

[@twHomeShow]

Thanks! I just bought a pack of tapered-head blue tapcon screws from Home Depot and used the included concrete drill bit and screwed them in. They will countersink themselves into the stone-boards.

[@springfiller5275]

Can you put these over brick ??

[@twHomeShow]

I don't see why not. I would refer to BarronDesign website for details. -Todd

[@meshguard]

why not use clear epoxy?

[@stephtraveler7378]

Looks great. You did a great job. As far as expense....wow. it adds up quick once you add any element of height.... i.e. You're likely 8 ft to the soffet level. that would require 4x the panels for the same LF. Plus, trim and outlet accessories. i think that why we only see this faux stone used as accent pieces and not as much on full walls. My project is 60 ft long by 9 feet high. It will be over $10k for the project. Stucco and paint would be less than $1k....

[@5sunny01]

hey didyou have any shrinkage issues?

[@twHomeShow]

No. I have this stone all around my house (inside and out). It has never shrank.

[@ev8947]

Only when im cold, thank for asking

[@katdareshruti]

He might be rich. But still people have hobbies and his might be diy-ing his projects. Nothing wrong with that + the video helps us poor folks 😜

[@joef1159]

Look awesome 👍👍you did good jobs thanks for video 🙏

[@twHomeShow]

Thank you so much 👍

[@swallowedinthesea11]

Are you going to get the new mid-engine V?

[@BenSinz45s]

Nice work. Looks good.

[@twHomeShow]

+Benny Salvador Thank you for your compliment and thanks for being a member of the channel!

[@a.saldivar6878]

Would you happen to know the colors of the house?

[@jefferyyasenchok3521]

The rust color paint was the wrong color, but you covered most of it up with the darker colors, it looks very nice. The only thing that does not look right is the unfinished wall were you spilled the paint and tords the front of the driveway were the plants are. The stone should be everywhere the molding was. Other than that it an upgrade to the curb appeal.

[@dinohudson1432]

Shoulda purchased the "corners" they offer.

[@dogg91702]

Does the stone look real?

[@dtrevino956]

You had me at Corvette

[@tomnorfleet796]

where did you purchase?

[@twHomeShow]

Hello Thomas, ALL of my product info is within the video description below this video. Hope that helps. Thanks for watching :)

[@johncranfordpersonal4146]

What brand are the panels?

[@twHomeShow]

Barron's Faux Panels. The link is in the video description. -Todd

[@phuthishore9237]

I'm going to do this too 🙂