Install MacOS Big Sur on VirtualBox | Issues fixed 2024

[@fabiobeyerbrawlstars]

before this here it worked but then it paused in boot...and now nothing works 💀💀💀💀💀💀💀💀💀💀

[@EpidemicTutorials-qh6de]

try reisntalling the machine and make sure to keep everything updated

[@fabiobeyerbrawlstars]

@@EpidemicTutorials-qh6de ok...

[@BoomBeluga]

where is the Big Sur.iso file after extracting the folder?

[@fabiobeyerbrawlstars]

I downloaded .iso from InternetArchive. It worked.

[@EpidemicTutorials-qh6de]

in the extracted folder?

[@carlitoxxe0]

Thanks for the video, but I get the error "No bootable option or device was found". Any ideas?

[@EpidemicTutorials-qh6de]

ISO is corrupted, download it using the link provided or another trusted source

[@mmoskon]

The virtual machine failed to boot. That might be caused by a missing operating system or misconfigured boot order.

[@EpidemicTutorials-qh6de]

The ISO file is corrupted, try downloading it from the link in the video description or a trusted source. If you have downloaded it from the link here, try downloading it again because the download most probably corrupted

[@mmoskon]

@@EpidemicTutorials-qh6de download was from the link but I'll try again :) Thanks!

[@framhm]

hey bro, my vm gets stuck in the loading bar and it never gets past like 40%. ive checked everything but nothing works. any idea?

[@EpidemicTutorials-qh6de]

That might be due to slow device performance. Do you have an SSD or HDD? CPU? RAM?

[@amrsaher6235]

it gave me this "bdsdxe failed to load boot0001 uefi vbox cd-rom vb1-1a2b3c4d"

[@EpidemicTutorials-qh6de]

Try the following: Check VirtualBox Settings: Open your VirtualBox settings for the macOS virtual machine. Go to the System section. Under the Motherboard tab, ensure that the EFI option is enabled. Save the settings and try booting the VM again. Create a Startup.nsh File: If the issue persists, you can create a startup.nsh file within the EFI shell to manually load the bootloader. Follow these steps: When you see the EFI shell prompt, type exit and press Enter. You’ll enter an EFI text-mode GUI. Select Boot Maintenance Manager and click. Choose Boot From File and click. You’ll see a list of entries (PCI bus paths). Look for the bootloader (usually named boot.efi). Load the bootloader by navigating to its location and executing it. Additional Tips: Sometimes, changing the chipset to PIIX3 might help. Try booting with this setting. If you encounter a message that the platform is not supported, consider using a lower version of macOS that is compatible with your hardware. AMD Processors: Note that running macOS guests on non-Apple hardware with AMD processors can be challenging due to compatibility issues. Some sources suggest adding the following command to your VM configuration: VBoxManage modifyvm "mac" --cpu-profile "Intel Core i7-6700K" Replace "mac" with your virtual machine name. Remember that macOS virtualization on non-Apple hardware can be tricky, and results may vary. If you continue to face issues, consider exploring alternative methods or seeking specialized forums for further assistance.

[@aaycue9550]

ERROR : Failed to query SMC value from the host (VERR_INVALID_HANDLE).

[@EpidemicTutorials-qh6de]

Check video description you will find the solution there

[@sakshamangane8422]

Showing Icloud not supported ran all commands for amd. Please help

[@EpidemicTutorials-qh6de]

U need to edit the config file first to activate I services

[@codewithanshul]

@@EpidemicTutorials-qh6de make video on that please.

[@DividesByZer0]

the network and audio drivers are not supported and dont work

[@EpidemicTutorials-qh6de]

Hi DividesByZer0! I'm sorry to hear you're having trouble with network and audio drivers in VirtualBox. Here are a few steps you can try to resolve these issues: 1. **Install Guest Additions**: Ensure that Guest Additions are installed and up to date. This can help with network and audio driver support. - To install Guest Additions, go to **Devices > Insert Guest Additions CD Image** and follow the prompts. 2. **Change Network Adapter Type**: Sometimes, changing the network adapter type can help. Go to **Settings > Network > Adapter 1** and change the **Adapter Type** to **Intel PRO/1000 MT Desktop (82540EM)**. 3. **Update VirtualBox**: Make sure you're running the latest version of VirtualBox. Updates often include fixes for driver issues. 4. **Check VirtualBox Forums**: The VirtualBox forums are a great resource for troubleshooting specific issues. You might find others who have encountered and resolved similar problems. 5. **Reinstall VirtualBox**: If all else fails, try uninstalling and then reinstalling VirtualBox. This can sometimes resolve persistent issues. I hope one of these steps helps! Let me know if you need further assistance or if you have any other questions.

[@arbellfriday6613]

I've downloaded the ISO 3 times, every time it's corrupted. Can't use it in VB and Winzip/WinRAR can't open it either. Do you have another source?

[@EpidemicTutorials-qh6de]

search online, plus it's better to use internet download manager

[@mainweb]

hey bro, when it's loading it stop at this : # [EBIFWFM] 0x00000000800003FF, so how do I fix it, or just that's normal

[@EpidemicTutorials-qh6de]

No Idea, try reinstalling it

[@mainweb]

@@EpidemicTutorials-qh6de I've tried several times but the same error, and even I change the iso files from different resources

[@vikasgupta1828]

Did any one get it working on intel core 9 processor running ubuntu 24 host and mac os big sur as guest os?

[@EpidemicTutorials-qh6de]

I haven't tested it on Ubuntu but I this same steps might be applied

[@sakul1903]

I cant enable the 3D acceleration feature in setting is there reason why? Do I have to have it enabled?

[@EpidemicTutorials-qh6de]

sakul1903 Thanks for your question! Sometimes, the 3D acceleration feature might not be available due to compatibility issues with your host system or the virtual machine settings1 . You don't necessarily need it enabled, but it can improve performance for certain applications1 . Try updating VirtualBox to the latest version and ensure your host system's graphics drivers are up to date. If you still can't enable it, you can proceed without it. If you found this video helpful, please like and subscribe for more content!

[@joelthomas5614]

Hi could you help me out please it says i have no bootable device

[@EpidemicTutorials-qh6de]

ISO is corrupted, download it using the link provided or another trusted source

[@moldsrc]

@@EpidemicTutorials-qh6de i have the same issue i down load from your link

[@ManoelGuilhermeFigueiredoNeto]

Intallation error after this message: AppleVTD is not yet installed as gSystem. RTC: only single RAM bank

[@EpidemicTutorials-qh6de]

Try updating Virtualbox and its extension pack

[@sonytt3]

my problem repeats instaLL Pross over &over never get that part did every step right ADM Ryzen 3

[@EpidemicTutorials-qh6de]

Check video description

[@nmd2899]

THANK YOU ❤ , MINE WORKED PERFECTLY, DID TAKE MANY EFFORTS THO

[@EpidemicTutorials-qh6de]

Glad it helped

[@DustxGameYT]

iso not working, error: mount valid iso

[@EpidemicTutorials-qh6de]

Make sure u mounted the right iso file

[@DustxGameYT]

@@EpidemicTutorials-qh6de I fixed it but now I get only 7mb of VRAM even if I setted it at 256

[@polopolopopo]

exitbs:start1 i get this error no matter what tried your troubleshoots in description too

[@EpidemicTutorials-qh6de]

Make sure to update all elements and try again

[@HarshdeepSandhu-mh1oh]

Virtualbox freezes at logo after some installation foran hour z reply

[@EpidemicTutorials-qh6de]

it might take very long time depending on your host device, make sure to follow the tutorial correctly if the issue persist let me know

[@sithijanisal]

Will this work on an AMD Ryzen 5 5600x cpu and a RTX 3050 Gpu?

[@EpidemicTutorials-qh6de]

yes

[@sithijanisal]

@@EpidemicTutorials-qh6de I will try it then

[@ogabek_027]

like vedio

[@EpidemicTutorials-qh6de]

Thanks, subscribe for more 💕

[@ogabek_027]

@@EpidemicTutorials-qh6de ok

[@ogabek_027]

@@EpidemicTutorials-qh6de but i have a problem

[@ogabek_027]

VBoxManage modifyvm "Mac OS" "Intel Core i5-1235" I wrote but it didn't work

[@ogabek_027]

after i type in cmd 'VBoxManage' is not recognized as an internal or external command, operable program or batch file.

[@мойкомпьютер520]

Sonoma don"t working. Boot Loop

[@EpidemicTutorials-qh6de]

kzbin.info/www/bejne/Y4jbZoqal5J5n8U

[@мойкомпьютер520]

It's not working

[@mohitkumarg26]

How to increase screen resolution for this virtual machine and also how to install the drivers of this virtual machine

[@EpidemicTutorials-qh6de]

@mohitkumarg26 Thanks for subscribing! To increase the screen resolution for your virtual machine, you can use the following steps: 1. Open Terminal in MacOS Big Sur. 2. Run the command: sudo VBoxManage setextradata "Your_VM_Name" VBoxInternal2/EfiGraphicsResolution 1920x1080 (replace `Your_VM_Name` with the name of your virtual machine and `1920x1080` with your desired resolution). 3. Restart your virtual machine. For installing drivers, you can install the VirtualBox Guest Additions: 1. Go to the 'Devices' menu in VirtualBox. 2. Select 'Insert Guest Additions CD image...'. 3. Follow the on-screen instructions to complete the installation. If you need more help, feel free to ask!

[@salasi7597]

when trying to signin apple account i get ICLOUD_UNSUPPORTED_DEVICE. Anyway to fix that?

[@AXRD-z9]

No Not at the moment but we are trying to find a way to add an Icloud on VM

[@EpidemicTutorials-qh6de]

try vmware videos: kzbin.info/www/bejne/fKKZm2x5iJx2a8k

[@joelthomas5614]

Could you provide another trusted source please

[@EpidemicTutorials-qh6de]

I have already provided one in the Video description

[@joelthomas5614]

@@EpidemicTutorials-qh6de This link is corrupted

[@KunalSawkare]

Having issues with the installation

[@EpidemicTutorials-qh6de]

please, share any specific issue or error codes

[@мойкомпьютер520]

Linux?

[@EpidemicTutorials-qh6de]

This tutorial is for windows

[@alwaysgrowing369]

Video Drivers? very very very slow! I have a powerfull machine, I had set 8 core 16gb ram, ver very slow withou GPU drivers!!

[@EpidemicTutorials-qh6de]

download guest drivers and increase display to 128mb

[@sonickautschuhe]

My boot is stuck at "[EB|LOG:EXITBS:START] followed by timecode" is this expected and the first boot just takes a while or is this an real error?

[@EpidemicTutorials-qh6de]

Was it successfully installed?

[@ogbrand3857]

I am getting the below error message: ----------------------------------------------------------------------------------------- VirtualBoxVM The virtual machine failed to boot. That might be caused by a missing operating system or misconfigured boot order. Mounting an operating system install DVD might solve this problem. Selecting an ISO file will attempt to mount it after the dialog is closed. DVD: Do not show this dialog again [Mount and Retry Boot] [Cancel] ----------------------------------------------------------------------------------------- The ISO was downloaded from the link you provided and mounted during the initial setup of the VM settings. Please can you help

[@huzair83]

same

[@EpidemicTutorials-qh6de]

Make sure the iso file is downloaded successfully and follow the steps again

[@huzair83]

@@EpidemicTutorials-qh6de iso file is ok, I actually tried 1.5 month ago, at that time I tried 5-6 times to install mac os ventura so, I can login with apple id and use xcode but it failed most of the time especially with virtualbox, then I tried vmware it still failed 2-3 times but then it worked. it was super slow, it was alright but I wasn't able to login because at the time apple was having otp error in my region. a week ago tried to login my apple id for something and it worked, I received otp, now I'm trying to install the vm again. this time it's a little smoother but still crashed while installing once, now I'm going to try again. I guess the commands to install mac in virtualbox messed my windows, I reinstalled it again 2 weeks ago.